Read description of hrt1002 table

I need the description in hrt1002 table, but i only have the objet id, there are any function that can tell me the description with the id object??

Hi Helios
Use the object ID that you have to retrieve the TABNR field from HRP1002. Use this TABNR to retrieve the description field from HRT1002.
~Ranganath
Reward points for all useful answers !!

Similar Messages

How to display name of the table and the description and the table type

Hi,
Can you people tell me how to display the name of the table and the description and the table type (View, structure, etc...) used in the program.
I want to display in a list.
Kind Regards

use this program
TABLES : TSTC, tstct.
TABLES : DD03l, DD02l.
DATA : Program like sy-repid.
DATA : BEGIN OF I_FINAL OCCURS 0,
tabname LIKE dd02l-tabname,
TABCLASS LIKE dd02l-tabCLASS,
TEXT LIKE DD02T-DDTEXT,
END OF I_FINAL.
DATA : BEGIN of ITAB Occurs 0,
name like dd02l-tabname,
END OF ITAB.
DATA : TCD(100) TYPE C.
DATA : var1 LIKE dd02l-tabname.
DATA : DESC LIKE TSTCT-TTEXT.
selection-screen skip.
SELECTION-SCREEN : BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : r1 RADIOBUTTON GROUP r DEFAULT 'X'.
Parameters : Tcode like sy-tcode.
selection-screen skip.
PARAMETERS : r2 RADIOBUTTON GROUP r.
Parameters : Prog like sy-repid.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
select-options : Type for dd02l-tabclass .
SELECTION-SCREEN END OF BLOCK B1 .
at selection-screen.
if r1 = 'X' and Tcode is initial.
message e001(00) with 'Enter Transaction Code' .
elseif r2 = 'X' and Prog is initial.
message e001(00) with 'Enter Program Name' .
endif.
START-OF-SELECTION.
if r1 = 'X'.
Prog = ' '.
select single * from TSTC where tcode = tcode.
if sy-subrc = 0.
program = TSTC-PGMNA.
select single TTEXT from tstct into desc where tcode = tcode and SPRSL = 'E'.
else.
Write :/ 'Invalid Transaction Code'.
exit.
endif.
elseif r2 = 'X'.
Tcode = ' '.
program = Prog.
endif.
CALL FUNCTION 'GET_TABLES'
EXPORTING
PROGNAME = Program
TABLES
TABLES_TAB = itab.
if itab is initial.
skip.
skip.
skip.
skip.
skip.
WRITE :/40 'No Data Found' color 6 INTENSIFIED OFF.
ELSE.
PERFORM : categorize.
endif.
END-OF-SELECTION.
LOOP AT I_FINAL.
WRITE :/4 I_FINAL-tabname COLOR 2 INTENSIFIED OFF NO-GAP HOTSPOT ON, 35 I_FINAL-TABCLASS COLOR 2 INTENSIFIED OFF NO-GAP,
50 I_FINAL-TEXT COLOR 2 INTENSIFIED OFF NO-GAP.
ENDLOOP.
AT LINE-SELECTION.
TCD = SY-LISEL.
var1 = TCD+3(30).
set parameter id 'DTB' FIELD VAR1.
call transaction 'SE11' and skip first screen.
TOP-OF-PAGE.
WRITE :/45 'TABLE DETAILS RELATED TO THE TRANSACTION CODE' COLOR 7 .
WRITE :/2 'DATE : ' COLOR 1, SY-DATUM COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'TRANSACTION CODE : ' COLOR 1, Tcode COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'TCODE DESCRIPTION : ' COLOR 1, desc COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'PROGRAM NAME : ' COLOR 1, PROGRAM COLOR 1 INTENSIFIED OFF NO-GAP.
SKIP 1.
WRITE :/1(140) SY-ULINE.
WRITE :/4 'TABLE NAME' COLOR 5 INTENSIFIED OFF NO-GAP,35 'TABLE TYPE' COLOR 5 INTENSIFIED OFF NO-GAP,
55 'DESCRIPTION' COLOR 5 INTENSIFIED OFF NO-GAP.
WRITE :/1(140) SY-ULINE.
*& Form categorize
text
--> p1 text
<-- p2 text
FORM categorize .
SELECT dd02ltabname dd02ltabCLASS DD02T~DDTEXT
FROM dd02l INNER JOIN DD02T ON dd02ltabname = dd02Ttabname
INTO TABLE I_FINAL
FOR ALL ENTRIES IN itab
WHERE DD02L~TABNAME = ITAB-NAME AND TABCLASS IN TYPE AND DDLANGUAGE = 'E'.
if sy-subrc <> 0.
skip.
skip.
skip.
skip.
skip.
WRITE :/40 'No Data Found' color 6 INTENSIFIED OFF.
endif.

Could not read definitions; no read definitions permission for table

We have a hand punch (time clock) that is maintained in Access. This is a 3rd party product, I believe I'm having a permissions problem but the vendor says we should be able to read the data as a guest account. I select the database push the >> arrow and on all but two tables I get:
Database Connector Error: DAO Error Code: 0xc26
Source: DAO.Fields
Description Could not read definitions; no read definitions permission for table or query 'AbsenseT'
(Table name changes with each table of course.)
After clicking through 30 some tables two of them are selected. I can browse them etc.
Vendor has pushed out of his court saying its a Crystal problem but I believe its a permission problem especially since I can access those 2 tables but I need someone to confirm that for me or just tell me I'm wrong thats OK too. Any help as to why this is happening would be appreciated.
Thanks,
Randy

Hi Randy,
I believe CR will log in as Admin for the top level but we don't support the second level of security. As you can see we only one one level of prompt.
ODBC may be a work around for you...
Thank you
Don

Do I have to use lock when I am reading data from a table

Hi,
When i am reading data from a table , do I have to set a lock on that table .
Is it necessary for us to set the lock on a table when I am reading data from the table.
When I am updating the table , do I have to set a lock on the table ?
If yes, then what sort of lock-read lock,write lock or shared lock?
Regards,
Sushanth H.S.

check it out,
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
check this link for example.
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
tables:vbak.
call function 'ENQUEUE_EZLOCK3'
exporting
mode_vbak = 'E'
mandt = sy-mandt
vbeln = vbak-vbeln
X_VBELN = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Normally ABAPers will create the Lock objects, because we know when to lock and how to lock and where to lock the Object then after completing our updations we unlock the Objects in the Tables
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
purpose: If multiple user try to access a database object, inconsistency may occer. To avoid that inconsistency and to let multiple user give the accessibility of the database objects the locking mechanism is used.
Steps: first we create a loc object in se11 . Suppose for a table mara. It will create two functional module.:
1. enque_lockobject
1. deque_lockobject
before updating any table first we lock the table by calling enque_lockobject fm and then after updating we release the lock by deque_lockobject.
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Reward if helpful

Retrieve short description from the table field

Hi all.
I got this system table called TBTCO. Inside the table, there is this field JOBCOUNT. How can i retrieve the short description from the table for this particular field? Any fm can be use?
thks

Hi
u can retrive the short text u want by writing simple query from the table DD03T:DD: Texts for fields (language dependent) there u can give table name fieldname and language then u can get the short text u want
plzz reward if i am usefull to u in any way..
for any further quiries u can contact me on [email protected]

Is it possible for the JDBC Lookup in PI 7.1 to read other user's table?

Hi,
I have the requirement of using the standard JDBC Lookup in PI 7.1. The user setup in the receiver JDBC adapter is only a service user that has a read access on some tables that are owned by another user or schema. When I am trying to do the import of Table's metadata, I can only see tables that are owned by the user setup in the receiver JDBC adapter.
Is there any any ways on how the user used in the receiver JDBC adapter can read another user's table (given that it has read access) during the import of Table's metadata?
Thank you in advacne for any response.
-Niro

Hi Matt,
I am struck in a similar kind of problem.
I have to do lookup from a view(not a table) available in a particular schema.
When i am using the external definition --> category dbtab
I am able to see all the tables available in the schema.Whereas i not able to see any views.
Please let me know how to proceed in such scenario?
Thanks,
Sudhansu

Reading Data from a Table With an Expert

Hi all - I'm trying to write an Expert in OWB that would read data from a table and create a new table based on that information. I have the table creation part down, but how can I read data from a table with an Expert? From what I've read, Experts only deal with metadata, and there is no mechanism in Experts to actually read data in the tables. Does OraTcl work in Experts? Has anyone ever came across this problem, and if so, how did you solve it? Thanks in advance for your time! - Don

Hi Don
Can also use Java and JDBC from within Tcl, see the routines in this file below, take modify or whatever;
http://blogs.oracle.com/warehousebuilder/ombora.tcl
source <dir>\ombora.tcl
set g_user scott
set g_upwd zzzzzz
set g_hostname localhost
set g_port 1521
set g_srvname ora111
oraconnect $g_user $g_upwd $g_hostname:$g_port:$g_srvname
oraselect "select * from emp" ""
As well as dumping the results to stdout (you probably want to comment that part out and change any other part you don't like), g_res is a ResultSet object you can use to do whatever.
Cheers
David

Read data from E$ table and insert into staging table

Hi all,
I am a new to ODI. I want your help in understanding how to read data from an "E$" table and insert into a staging table.
Scenario:
Two columns in a flat file, employee id and employee name, needs to be loaded into a datastore EMP+. A check constraint is added to allow data with employee names in upper case only to be loaded into the datastore. Check control is set to flow and static. Right click on the datastore, select control and then check. The rows that have violated the check constraint are kept in E$_EMP+ table.
Problem:
Issue is that I want to read the data from the E$_EMP+ table and transform the employee name into uppercase and move the corrected data from E$_EMP+ into EMP+. Please advise me on how to automatically handle "soft" exceptions in ODI.
Thank you

Hi Himanshu,
I have tried the approach you suggested already. That works. However, the scenario I described was very basic. Based on the error logged into the E$_EMP table, I will have to design the interface to apply more business logic before the data is actually merged into the target table.
Before the business logic is applied, I need to read each row from the E$EMP table first and I do not know how to read from E$EMP table.

Read data from 2 tables.

Hello everyone,
I created a SQL database in phpMyAdmin. It contains 2 tables.
'Woninginformatie' and 'Makelaars'.
I use the next SQL query in my PHP file to read from the
database:
SELECT DISTINCT * FROM Woninginformatie
INNER JOIN Makelaars ON Woninginformatie.ID_mk =
Makelaars.ID_mk
WHERE Huiscode = $huiscode"
The query works correct and I get all the fields from both
tables. Anyway, in Flash I can only read out the information in the
table 'Woninginformatie'.
I use these kind of codes to read from the database:
eigendomssituatie =
gegevens.childNodes[0].childNodes[24].firstChild.nodeValue;
How can I also read data from the second table?

you can't read data from the 2nd table because because you
have a table issue, php issue or you can read data from the table
but are having trouble getting those data into flash? are you using
echo to return data to flash?

How to get DDL descriptions of DDIC tables?

Hi,
for a replication scenario of ERP data into BOBJ BI on Demand we have to define data schemas in the BI oD MS SQL Server. Instead of doing that manually, we could also import DDL (data definition language) descriptions of the ERP DDIC table to replicate into the SQL Server.
The question is: Is it possible to generate or extract DDL descriptions of database tables defined in the ERP DDIC and if yes, how (e.g. inside ABAP or using DB tools)?
Thanks for any assistance,
H-D

Hi,
if you use SQL2005 or SQL2008 you can try SSMS to generate the DDL statements. Just expand your database <SID> and apply a filter on the tables tab. If you right click on a specific table you have the option to 'Script table as' -> 'Create to' -> 'New Query Editor Window'. That way you will get the CREATE TABLE statement.
Regards,
Sven

READ CHECKBOX FROM INTERNAL TABLE

can anyone tell me how to read in an internal table whether checkbox are marked or not....
i m finding difficulty in identifiyng my checkboxes as marked or not....dynamically....
Thanks in Advance.......
KARTIKEY

Hi,
    are u using ALV LIST or GRID?
Find the sample code.
TYPES:
      BEGIN OF ty_output,
      chk TYPE c,
      number TYPE i,
      name(20) TYPE c,
      END OF ty_output.
DATA: gt_output TYPE STANDARD TABLE OF ty_output,
      gs_output TYPE ty_output.
<<populate the internal table>>
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
      i_callback_program             = sy-repid
      i_callback_pf_status_set       = 'PF_STATUS'
      i_callback_user_command        = 'USER_COMMAND'
I_STRUCTURE_NAME               =
      is_layout                      = wa_layout
      it_fieldcat                    = it_fieldcatalog
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      t_outtab                       = gt_output
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
*&      Form USER_COMMAND
FORM user_command USING p_ucomm TYPE sy-ucomm
                        p_selfld TYPE slis_selfield.
CASE p_ucomm.
    WHEN 'HELLO'.
       loop at gt_output into gs_output where chk = 'X'.
    < <ur code>>
        endloop.
ENDCASE.
ENDFORM.
Note: HELLO is a button in the PF status,
Regards,
Niyaz

Reading Data from Internal Table

Hi,
Can anyone please tell me how to read data from Internal Tables in the Event Handler without using the Select statement OnInitialization?
Thanks,
Gaurav

Hi Siddhartha,
Can you tell me the problem in my code. I tried to work on the way you suggested. Though I have not finished with the coding, I just wanted to know whether I am going in the direction or not.
I have declared the the structure in Type Defination as
TYPES: BEGIN OF TEST_STRUC,
         BEGDA TYPE BEGDA,
         ENDDA TYPE ENDDA,
       END OF TEST_STRUC.
TYPES: TEST_TAB_TYPE TYPE TABLE OF TEST_STRUC.
In the Event Handler, I have added the following code on OnInputProcessing:
event handler for checking and processing user input and
for defining navigation
DATA TEST_INFO LIKE LINE OF TEST_TAB.
DATA: MYTAB6 TYPE TABLE OF PA0006,
      MYTAB6_WA LIKE LINE OF MYTAB6.
REFRESH TEST_TAB.
CLEAR TEST_INFO.
MYTAB6_WA-BEGDA = REQUEST->GET_FORM_FIELD( STARTDATE ).
MYTAB6_WA-ENDDA = REQUEST->GET_FORM_FIELD( ENDDATE ).
IF EVENT->NAME EQ 'button'
   AND EVENT->SERVER_EVENT EQ 'click'.
LOOP AT MYTAB6 INTO MYTAB6_WA.
    TEST_INFO-BEGDA = MYTAB6_WA-BEGDA.
    TEST_INFO-ENDDA = MYTAB6_WA-ENDDA.
ENDLOOP.
APPEND TEST_INFO TO TEST_TAB.
CLEAR TEST_INFO.
NAVIGATION->SET_PARAMETER( NAME = 'test_tab'
VALUE = 'begda' ).
NAVIGATION->SET_PARAMETER( NAME = 'test_tab'
VALUE = 'endda' ).
NAVIGATION->GOTO_PAGE( 'MyBSP2.htm').
ENDIF.
P.S. MyBSP2.htm is my next page.
Thanks,
Gaurav

How to read from an internal table with multiple key fields.

Hi All!!
I want to read from an internal table having keys as k1,k2,k3.
How can I use read statement to read an entry having this as the key fields.
Thanks in adavance..
Prabhas Jha

hi there
use:
sort itab by K1 K2 K3.
read table itab into wa with key K1 = value 1
                                              K2 = value2
                                              K3 = value 3
                                               BINARY SEARCH.
where:
itab is ur internal table
wa is the work area with the same line type as the itab
cheers
shivika

How to read Data from ZL table

Can someone give me function module or sample code to read data from ZL table in B2 cluster
Edited by: Saurabh Desai on Jan 13, 2010 9:13 PM

You wanted to extract data, ZL table to precise, from B2 cluster, is that right?
For this the snipped I gave you can be used.
First you need an inlcude with appropriate declarations
INCLUDE rpc2b201.       "-> here b2 structure, ZL table are declared
Now you provide key for the cluster which is what below does
b2-key-pernr = "ee number
b2-key-pabrj = "year to extract data for
b2-key-pabrp = "month to extract data for
b2-key-cltyp = 1.
Now all you need is to extract ZL table form B2 cluster
IMPORT zl   "get ZL table
FROM DATABASE pcl2(b2) "from cluster B2
ID b2-key.    "for this key
That's it. Now you have correct data in ZL table which you can process further.
Hope now it is clear.
Regards
Marcin

No read access to system tables

Hi
i try to migrate access db to oracle and when testing connection it gives me error message says "no read access to system tables modify access db before retrying"
what to do?
thanks in advance.

Access tab
For a connection to a Microsoft Access database, click Browse and find the database (.mdb) file. However, to be able to use the connection, you must first ensure that the system tables in the database file are readable by SQL Developer, as follows:
Open the database (.mdb) file in Microsoft Access.
Click Tools, then Options, and on the View tab ensure that System Objects are shown.
Click Tools, then Security, and, if necessary, modify the user and group permissions as follows: select all tables whose names start with Msys, and give the Admin user at least Read Design and Read Data permission on these tables. Save changes and close the Access database file.
Create and test the connection in SQL Developer.

Read description of hrt1002 table

Similar Messages

Maybe you are looking for