Read dynamic internal table

hi all,
i am working with dynamic internal table. how to use a read statement for the dynamic internal table.
Thanks

hi
try with this sample code.
DATA: tab TYPE TABLE OF mara,
field_key TYPE char100.
FIELD-SYMBOLS: <tab> TYPE ANY TABLE,
<wa> TYPE ANY.
SELECT * UP TO 10 ROWS FROM mara INTO TABLE tab[].
ASSIGN tab[] TO <tab>.
field_key = 'MATNR'.
READ TABLE <tab> ASSIGNING <wa>
WITH KEY (field_key) = '000000000000000200'.
Cheers,
Madhu

Similar Messages

Dynamic internal table and dynamic read statements.

Hi,
My Scenario :
I have two dynamic internal tables.
I am looping at one internal table and trying to read another table.
In the read statement how do I mention the key dyamically.
Example code below :
LOOP AT <dyn_table> ASSIGNING <dyn_wa>.
read second dynamic internal table.
enloop.
The key which I want use for reading say it is keyed in the selection criteria....
Also based on the value I read I want to modify the first internal table field value.
Remember I dont want to explicity mention the key
How do I do that?
Thanks
Krishna.

Hi
U need to use the field-symbol, but u can't use a WHERE option, but u need to use the CHECK statament into the second loop:
LOOP AT <dyn_table> ASSIGNING <dyn_wa>.
    LOOP AT <DYN_TABLE2> ASSIGNING <DYN_WA2>.
        ASSIGN COMPONENT <COMPONENT> OF STRUCTURE   <DYN_WA2> TO <FS>.
        CHECK <FS> IN (=) .......
            ASSIGN COMPONENT <COMPONENT> OF STRUCTURE   <DYN_WA> TO <FS2>.
            <FS2> = .......
            EXIT.
    ENDLOOP.
ENDLOOP.
Max

Dynamic Internal table values read and assign it back

Hi All,
        I want to get the internal table field name dynamically and fetch its value and do some calculation and asign the new value to the same field name.
       CONCATENATE '<WA_PIPE>-ZW' v_index INTO v_fld.
        CONDENSE v_fld NO-GAPS.
        FIELD-SYMBOLS <fs> TYPE ANY.
        ASSIGN (v_fld) TO <fs>.
        v_fld1 = <fs> * <wa_pipe>-zrate.
Now i've the internal table field name as <WA_PIPE>-ZW1 in v_fld and v_fld1 is having the value of the same field.
How to assign it to the internal table field.
Thanks.
Ashok

*& Report YY_TEST1
REPORT YY_TEST1.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: it_alvfc type slis_t_fieldcat_alv,
wa_alvfc type slis_fieldcat_alv,
it_fldcat type lvc_t_fcat,
wa_fldcat type lvc_s_fcat.
selection-screen begin of block b1 with frame title text-001.
parameters: p_flds(5) type c.
selection-screen end of block b1.
start-of-selection.
*build the dynamic internal table
perform build_dyn_itab.
*write 5 records to the alv grid
do 5 times.
perform build_report.
enddo.
*call the alv grid.
perform call_alv.
*Build_dyn_itab
form build_dyn_itab.
*Create the dynamic internal table
data: new_table type ref to data,
new_line type ref to data.
*Create fields .
do p_flds times.
clear wa_fldcat.
wa_fldcat-fieldname = sy-index.
wa_fldcat-datatype = 'CHAR'.
wa_fldcat-intlen = 5.
append wa_fldcat to it_fldcat .
enddo.
*Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
*Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
*Form build_report
form build_report.
*Fill some values into the dynamic internal table
data: fieldname(20) type c.
data: fieldvalue(5) type c.
data: index(3) type c.
field-symbols: <fs1>.
do p_flds times.
index = sy-index.
*Set up fieldvalue
concatenate 'FLD' index into
fieldvalue.
condense fieldvalue no-gaps.
assign component index of structure <dyn_wa> to <fs1>.
<fs1> = fieldvalue.
enddo.
*Append to the dynamic internal table
append <dyn_wa> to <dyn_table>.
endform.
*CALL_ALV
form call_alv.
*Build FC for ALV
loop at it_fldcat into wa_fldcat.
wa_alvfc-fieldname = wa_fldcat-fieldname.
wa_alvfc-seltext_s = sy-tabix.
wa_alvfc-outputlen = wa_fldcat-intlen.
append wa_alvfc to it_alvfc.
endloop.
*Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = it_alvfc
tables
t_outtab = <dyn_table>.
endform.

Read statement on dynamic internal tables

Hello All,
I have a dynamic internal table <G_T_ITAB> with fields F1, F2, F3 & F4 .
I want to read the internal table <G_T_ITAB>. So im using the below code.
LOOP AT G_T_DATA.
READ TABLE <G_T_ITAB> INTO <G_R_ITAB> WITH KEY F1 = G_T_DATA-F1.
IF SY-SUBRC <> 0.
ELSE.
ENDIF.
ENDLOOP.
But this is giving syntax error that F1 is not the field of <G_T_ITAB>. But the field is there in <G_T_ITAB>.
Can you suggest me to solve this issue. Or is there any other approach to use READ statement on dynamic internal tables.
Thanks in advance.
Best Regards,
Sasidhar Reddy Matli.

Hi ,
Read this way....
FIELD-SYMBOLS:
<fs_str> type any,
<fs_lf_fval> type any,
<fs_lt_result_rate> type any table,
<fs_ls_result_rate> type any.
DATA:
lv_fname type string.
lv_fname = 'MATNR'.
assign component 'matnr' of structure <fs_str> to <fs_lf_fval>.
READ TABLE <fs_lt_result_rate> INTO <fs_ls_result_rate>
WITH KEY (lv_fname) = <fs_lf_fval>.
Thanks,
Shailaja Ainala.

Dynamic Internal Table for reading data from external file

Hello All,
The task was to create a internal table with dynamic columns,
Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
can any one help me in getting my task completed..
Thanks
Kumar

Hi,
I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
Regards

How To Read Field Values Form Dynamic Internal Table

Hi,
I Created a dynamic internal table using.
FIELD-SYMBOLS: <gt_table> TYPE STANDARD TABLE,
               <wa_gt_table>,
               <l_fvalue> TYPE ANY.
This Interanl table is working well, and all values are populated to an ALV.
Now I try to set a link
for that I am using below code
      READ TABLE <gt_table> ASSIGNING <l_fvalue> index rs_selfield-tabindex.
      IF sy-subrc EQ 0.
        insplot = <l_fvalue>-prueflos.
Now it is showing a syntax error :
the data object <l_fvalue> has no structure and there for no component called prueflos
Regards
Nausal

Hi,
Refere following code
Local Field Symbol
FIELD-SYMBOLS: <lf_any> TYPE ANY.                     "Changed data
LOOP AT <gf_dyna_table> ASSIGNING <gf_dyna>.
    DO.
      ASSIGN COMPONENT sy-index OF STRUCTURE <gf_dyna> TO <lf_any>.
      IF sy-subrc NE 0.
        EXIT.
      ENDIF.
      IF ls_attach-line IS INITIAL.
        ls_attach-line = <lf_any>.
      ELSE.
        CONCATENATE ls_attach-line <lf_any> INTO ls_attach-line
                                            SEPARATED BY lc_tab.
      ENDIF.
    ENDDO.
    CONCATENATE lc_cret ls_attach-line INTO ls_attach-line.
Append Changed Data to attachement table
    APPEND ls_attach TO gt_attach.
Clear
    CLEAR : ls_attach.
ENDLOOP.
Regards,
Prashant

Distinct values from dynamic internal tabls

Hi All,
I have a dynamic internal tables like <dy_table> , i want to get distinct values from this internal tables,
how to do that, structure of dynamic internal tables is dynamic acc. to user conditions.
regards,
Anuj

Hi Anuj
Just try this,
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = tb_fields_for_it
IMPORTING
ep_table = gp_dyn_table.
ASSIGN gp_dyn_table->* TO <gt_table>.
ASSIGN LOCAL COPY OF INITIAL LINE OF <gt_table> TO <fs_table>.
LOOP AT tb_output.
*To assign value for serial number.
ASSIGN COMPONENT 1 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-sno.
UNASSIGN <ls_field>.
*To assign value for Sales Organization.
ASSIGN COMPONENT 2 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-vkorg.
UNASSIGN <ls_field>.
*To assign Rate for its respective Condition type.
LOOP AT tb_konp WHERE knumh = tb_output-knumh.
READ TABLE tb_fieldcat1 WITH KEY fieldname = tb_output-kschl.
IF sy-subrc EQ 0.
lv_count = tb_fieldcat1-col_pos.
ASSIGN COMPONENT lv_count OF STRUCTURE <fs_table> TO <ls_field>.
IF tb_konp-konwa EQ '%'.
tb_konp-kbetr = tb_konp-kbetr / co_10.
<ls_field> = tb_konp-kbetr.
ELSE.
<ls_field> = tb_konp-kbetr.
ENDIF.
ENDIF.
ENDLOOP.
lv_count = lv_count + 1.
APPEND <fs_table> TO <gt_table>.
CLEAR <fs_table>.
ENDLOOP.
Hope this proves helpful to you.

How to delete data from dynamic internal table

Hi,
I have dynamic internal table and I have some slection screen fields , using these selection screen fields
(select -options), I have to filter the data? assigning will work with READ , but I have select options not the parametre,
and also delete will not work for dynamic table..
as we cannot use assigning with delete..
So how to do this?
and one more thing is , I cannot filter the data while selection( in select, I cannot filter the data-> as it's not coming directly from table, it's coming from buffer),
so now after selection of data, I need to filter the data from dynamic table.
Is there any way to do this?
Regards,
Mrunal

Hi matt,
I tried with below code as you said. But I am getting dump. can you help?
here is my piece of code.
FIELD-SYMBOLS: <LS_DATA> type any,
                           <LT_DATA> TYPE table,
                            <L_FIELD> type any.
    ASSIGN <l_buffer_entry>-dataptr->* TO <LS_DATA>.
    ASSIGN <l_buffer_entry>-dataptr->* TO <LT_DATA>.
LOOP AT <LT_DATA> ASSIGNING <LS_DATA>.
ASSIGN COMPONENT 'BUKRS' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BUKRS.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ASSIGN COMPONENT 'BELNR' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BELNR.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ENDLOOP.
and here is the description of my dump:->>>
You attempted to access an unassigned field symbol
(data segment 32772).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.

Column names of a dynamic internal table

Hi Friends,
I have a dynamic internal table flowing in my ABAP program and I want to list down the column names of the this dynamic internal table.
The declaration of this dynamic internal table :
   FIELD-SYMBOLS:
    <l_t_data>         TYPE STANDARD TABLE.
Can you please tell me how to get the column names?
Thanks,
Gaurav

Hi,
     You can use ABAP Runtime Type Identification to get the column names of the internal table.
e.g >
>lo_itab holds reference to description object of internal table whose column names i have to extract.
>Using method describe_by_data of class cl_abap_typedescr export the field symbol assigned to the table and import the object reference into lo_itab.
>Then using method get_table_line_type of lo_itab import line type description object reference into lo_line.
>Check if lo_line is referring to a structure, if yes , downcast it to a object reference lo_struct of type cl_abap_structdescr.
>The column description of all columns in the structure is stored in 'components' table of cl_abap_structdescr.
     So loop at the table to get all the column names stored in column 'name' of table 'components'.
Thank You.

How to do parallel processing with dynamic internal table

Hi All,
I need to implement parallel processing that involves dynamically created internal tables. I tried doing so using RFC function modules (using starting new task and other such methods) but didn't get success this requires RFC enabled function modules and at the same time RFC enabled function modules do not allow generic data type (STANDARD TABLE) which is needed for passing dynamic internal tables. My exact requirement is as follows:
1. I've large chunk of data in two internal tables, one of them is formed dynamically and hence it's structure is not known at the time of coding.
2. This data has to be processed together to generate another internal table, whose structure is pre-defined. But this data processing is taking very long time as the number of records are close to a million.
3. I need to divide the dynamic internal table into (say) 1000 records each and pass to a function module and submit it to run in another task. Many such tasks will be executed in parallel.
4. The function module running in parallel can insert the processed data into a database table and the main program can access it from there.
Unfortunately, due to the limitation of not allowing generic data types in RFC, I'm unable to do this. Does anyone has any idea how to implement parallel processing using dynamic internal tables in these type of conditions.
Any help will be highly appreciated.
Thanks and regards,
Ashin

try the below code...
DATA: w_subrc TYPE sy-subrc.
DATA: w_infty(5) TYPE c.
data: w_string type string.
FIELD-SYMBOLS: <f1> TYPE table.
FIELD-SYMBOLS: <f1_wa> TYPE ANY.
DATA: ref_tab TYPE REF TO data.
CONCATENATE 'P' infty INTO w_infty.
CREATE DATA ref_tab TYPE STANDARD TABLE OF (w_infty).
ASSIGN ref_tab->* TO <f1>.
* Create dynamic work area
CREATE DATA ref_tab TYPE (w_infty).
ASSIGN ref_tab->* TO <f1_wa>.
IF begda IS INITIAL.
    begda = '18000101'.
ENDIF.
IF endda IS INITIAL.
    endda = '99991231'.
ENDIF.
CALL FUNCTION 'HR_READ_INFOTYPE'
    EXPORTING
      pernr           = pernr
      infty           = infty
      begda           = '18000101'
      endda           = '99991231'
    IMPORTING
      subrc           = w_subrc
    TABLES
      infty_tab       = <f1>
    EXCEPTIONS
      infty_not_found = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    subrc = w_subrc.
ELSE.
ENDIF.

How to transfer data from a dynamic internal table

Hi All
I want to transfer data from a dynamic internal table<dyn_table>
to a non dynamic internal table itab which should have the same structure as <dyn_table>.
How can this be done?
Regards,
Harshit Rungta

As stated earlier this can be done only through field symbols...
You cannot create an non dynamic internal table with ANY structure...using DATA statement
If the strucutre is defined well and good...you can create an non-dynamic internal table...
If you do not know the structure then the internal table has to be dynamic...and to be generated using field symbols
DATA: lv_ref TYPE REF TO data.
FIELD-SYMBOLS: <fs_dyn_table> TYPE STANDARD TABLE.
* You create a dynamic internal table...
CREATE DATA lv_ref LIKE (your_dynamic_internal_table).
ASSIGN lv_ref->* TO <fs_dyn_table>.
Now...do the transfer.
<fs_dyn_table> = "your_dynamic_internal_Table
Hope it helps!

Error while creating a dynamic internal table refers to custom field

Hi all,
I am getting the exception TYPE_NOT_FOUND when I try to create a dynamic internal table using:-
DATA: gr_desc TYPE REF TO cl_abap_typedescr.
gr_desc = cl_abap_typedescr=>describe_by_name( p_field ).
The field p_field is a Z-field inside a DB table, (e.g. a user added field in MARA). The statement fails at that point and gives a runtime exception. Any suggestions to how I may solve this problem? Or any alternatives for the same? I guess we face this issue for all custom fields..has SAP released a note for this??
Thanks..

that's just the wrong method, you should use DESCRIBE_BY_DATA
gr_desc = cl_abap_typedescr=>describe_by_data( p_field ).
Note: DESCRIBE_BY_NAME is to be used for referencing a DDIC type by its name. Example:
gr_desc = cl_abap_typedescr=>describe_by_name( 'MARA-ZZFIELD' ).

Error while creating dynamic internal table.

Hello Expert,
While creating a dynamic internal table, it throw an run time error as :
" LOAD PROGRAM NOT FOUND
CX_SY_PROGRAM_NOT_FOUND"
i tried to debug the program, it found this error comes while calling
CALL METHOD cl_alv_table_create=>create_dynamic_table
please anyone help me out to resolve this problem.
what could be the reason of error? and how to avoid it?
<REMOVED BY MODERATOR>
thanks in advance.
~ shweta.
Edited by: Alvaro Tejada Galindo on Feb 28, 2008 2:41 PM

Hi,
Go through this program.
Report z_dynamic.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
Regards,

DYNAMIC INTERNAL TABLE CREATION BASED ON THE CONTENT OF ANOTHER INTERNAL TA

Hi All
I need to create an internal table at runtime.
I have a selection screen parameter which is specific to country, Which can take values below
eg:- IT_AREA for Italy(IT)
FR_AREA for France(FR)
IE_AREA for Ireland(IE).....And similary for other countries
Based on the Above parameter, I need to create Internal Table as below
DATA: itab TYPE italy_data Occurs 0.
If I declare as above, Then itab has fields from italy_data. And this internal table i will be sending it to Function Module to get data into it.
My Requirement is to Create the Internal table itab during runtime for tables italy_data OR france_data OR ireland_data based on selection screen parameter. Tables on Country may have different number of fields in it.
Can anyone help me on this??

Hi,
Here is a sample code to create a dynamic internal table.
REPORT ytrab03.
TABLES: mara, makt.
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat,
ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
ob_cont_alv TYPE REF TO cl_gui_custom_container,
ob_alv TYPE REF TO cl_gui_alv_grid,
vg_campos(255) TYPE c,
i_campos LIKE TABLE OF vg_campos,
vg_campo(30) TYPE c,
vg_tables(60) TYPE c.
DATA: e_params LIKE zutsvga_alv_01.
FIELD-SYMBOLS: <l_table> TYPE table,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
PARAMETERS: p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
is_fcat-fieldname = 'COL01'.
is_fcat-ref_fieldname = 'MATNR'.
is_fcat-ref_tabname = 'MARA'.
APPEND is_fcat TO it_fcat.
is_fcat-fieldname = 'COL02'.
is_fcat-ref_fieldname = 'MAKTX'.
is_fcat-ref_tabname = 'MAKT'.
APPEND is_fcat TO it_fcat.
LOOP AT it_fcat INTO is_fcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-ref_fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
CONCATENATE is_fieldcat-ref_table is_fieldcat-ref_field
INTO vg_campos SEPARATED BY '~'.
APPEND vg_campos TO i_campos.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
SELECT (i_campos) FROM mara INNER JOIN makt
ON mara~matnr = makt~matnr
UP TO p_max ROWS
INTO TABLE <l_table>.
LOOP AT <l_table> INTO <l_line>.
LOOP AT it_fcat INTO is_fcat.
ASSIGN COMPONENT is_fcat-fieldname
OF STRUCTURE <l_line> TO <l_field>.
IF sy-tabix = 1.
WRITE: /2 <l_field>.
ELSE.
WRITE: <l_field>.
ENDIF.
ENDLOOP.
ENDLOOP.
Regards,
Karuna.

Dynamic Internal Table creation and population

Hi gurus !
my issue refers to the slide 10 provided in this slideshow : https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b332e090-0201-0010-bdbd-b735e96fe0ae
My example is gonna sound dumb, but anyway: I want to dynamically select from a table into a dynamically created itab.
Letu2019s use only EKPO, and only field MENGE.
For this, I use Classes cl_abap_elemdescr, cl_sql_result_set and the Data Ref for table creation. But while fetching the resultset, program dumps when fields like MENGE, WRBTR are accessed. Obviously their type are not correctly taken into account by my program.
Here it comes:
DATA: element_ref             TYPE REF TO cl_abap_elemdescr,
      vl_fieldname               TYPE string,
             tl_components         TYPE abap_component_tab,
             sl_components         LIKE LINE OF tl_components_alv,
linetype_lcl               TYPE REF TO cl_abap_structdescr,
ty_table_type            TYPE REF TO cl_abap_tabledescr,
g_resultset             TYPE REF TO cl_sql_result_set
u2026
CONCATENATE sg_columns-table_name '-' sg_columns-column_name INTO vl_fieldname.
* sg_columns-table_name contains 'EKPO'
* sg_columns-column_name contains 'MENGE'
* getting the element as a component
element_ref ?= cl_abap_elemdescr=>describe_by_name( vl_fieldname ).
sl_components-name = sg_columns-column_name.
sl_components-type ?= element_ref.
APPEND sl_components TO tl_components.
* dynamic creation of internal table
linetype_lcl = cl_abap_structdescr=>create( tl_components ).
ty_table_type = cl_abap_tabledescr=>create(
                  p_line_type = linetype_lcl ).
u2026
* Then I will create my field symbol table and line. Code has been cut here.
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
u2026
* Then I will execute my query. Here itu2019s: Select MENGE From EKPO Where Rownum = 1.
g_resultset = g_stmt_ref->execute_query( stmt_str ).
* Then structure for the Resultset is set
CALL METHOD g_resultset->set_param_struct
    EXPORTING
      struct_ref = dy_line.
* Fetching the lines of the resultset => Dumpu2026
WHILE g_resultset->next( ) > 0.
    ASSIGN dy_line->* TO <dyn_wa>.
    APPEND <dyn_wa> TO <dyn_table>.
ENDWHILE.
Anyone has any clue to how prevent my Dump ??
The component for MENGE seems to be described as a P7 with 2 decimals. And the resultset wanna use a QUAN type... or something like that !

Hello
I have expanded your sample coding for selecting three fields out of EKPO:
*& Report ZUS_SDN_SQL_RESULT_SET
*& Thread: Dynamic Internal Table creation and population
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1375510"></a>
*& NOTE: Coding for dynamic structure / itab creation taken from:
*& Creating Flat and Complex Internal Tables Dynamically using RTTI
*& https://wiki.sdn.sap.com/wiki/display/Snippets/Creating+Flat+and+
*& Complex+Internal+Tables+Dynamically+using+RTTI
REPORT zus_sdn_sql_result_set.
TYPE-POOLS: abap.
DATA:
go_sql_stmt       TYPE REF TO cl_sql_statement,
go_resultset      TYPE REF TO cl_sql_result_set,
gd_sql_clause     TYPE string.
DATA:
gd_tabfield      TYPE string,
go_table         TYPE REF TO cl_salv_table,
go_sdescr_new    TYPE REF TO cl_abap_structdescr,
go_tdescr        TYPE REF TO cl_abap_tabledescr,
gdo_handle       TYPE REF TO data,
gdo_record       TYPE REF TO data,
gs_comp          TYPE abap_componentdescr,
gt_components    TYPE abap_component_tab.
FIELD-SYMBOLS:
<gs_record>   TYPE ANY,
<gt_itab>     TYPE STANDARD TABLE.
START-OF-SELECTION.
continued.

Read dynamic internal table

Similar Messages

Maybe you are looking for