Read Valued from sales order configurator

Hello Gurus,
I have a requirement wherein i want to read the values entered in the sales order configuration.
I tried to search the forums but couldn't know from exactly where I could read it.
I need to read these values from some temporary tables, and within the exit MV45AFZZ or MV45AFZB,
or wherever suited.
Please help me on this.
Expecting a quick reply,
Sumit.

Hi, Alessandro!
I think the trouble is that you are trying to assign a FS to the header of the document. You are getting the information of the current row, so you have to bind a formatted search to some column of the "table - part" of the document.
And also you can try:
SELECT $[$38.1]
38 - the value of "Item" (when you point a mouse to the cell, information you want from)
1 - the value of "Column" (the same...)
It will get an info of this cell in a current row.
HTH!

Similar Messages

Rounding Off Value is not copying from Sales Order to Invoice

Hi Experts,
In Pricing Procedure i maintained DIFF- Rounding Off Condition type with the following Combinations.
Print:X
Requirement:13
Cal Type: 16
Bas Type: 4
When i create sales order the system is calculating Rounding Off after saving the sales order.The requirement is that it should shows the rounding off value before saving the sales order.Secondly when i make invoice the rounding off value is not copying from the saved sales order.After i save the invoice in VF02 the rounding off value is coming .
Regards
Subhasish

Cond type DIFF has cond catgory L Generally new when copying. So the value from sales order will not be copied, it will be redetermined in invoice.
Also rounding off cond is to round the total value which can change in invoice based on the invoice qty.

Copy Net Value(VBAK-NETWR) from sales order to Delivery VL02N

Hi all,
Please can anyone help me with this? When the sales order is saved we need to move the net value to the any field in the delivery.
Thanks
Jasmeet

Hi,
This is a standard SAP functionality that values from sales order will be copied to billing and not to delivery.
In fact values from both sales order and delivery are copied to billing.
If you want to copy that you would need to copy the same in some empty field in the delivery document and that too with some BadI or user exit ZE_SHP_TAB_CUST_HEAD.
This user exit will create an additional tab in delivery header and you can copy the pricing value from sales order to any field in this tab.Developer can confirm the same.
Regards
Karan

Condition type - Freight value is copied into invoice from sales order

Hi All,
I have a Issue while copying freight value to Invoice.
I have created Freight condition type - XYZ where i have maintained "Group condition, Header condition & Item condition" in the definition of the condition type.
I have placed this condition type in Pricing Procedure (Ex: ABCD) and also in Delivery Pricing Procedure (PQRS) - Checked "Manual check box".
When i place this manual condition type in Delivery --> conditions tab(Item level), then it is copying to Invoice. However when I am placing this condition in Sales Order it is not copying into Invoice???
I have maintained copying control between delivery document and Billing document and I have maintained "Price Source" as E - Delivery/Order.
My requirement is when I am maintaining Freight value in delivery, then it has to consider the Delivery Freight..If freight is not maintained in Delivery then it has to copy from Sales Order?? Is it possible ?
Please help me in this regard.
Thanks in Advance.

Hi,
Thank you very much for your response.
If i used price source as "D" then other conditions like price & tax are not copied sales order. Freight value is copying from delivery. I want system has to consider the sales order in case of freight value Zero in delivery.

To get the configuration detials of a material from sales order

Hi Gurus,
I know we can get the configuration details of a material from Purchase order using function module 'ME_VAR_GET_CLASSIFICATION'. I need an equivalent function module for getting configuration details of a material from sales order. Is there any?...
thanks in advance...

Hi Gurus,
Myy probelm is solved. I used the same funcitton module ME_VAR_GET_CLASSIFICATION. wiht Material and configuration as the inputs. then i used table CABN to filter the hidden characteristics using the field ACTVE.
This link in SDN will be more useful. please try this.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/2007/09/12/classification+concept&showcomments=true

Price in invoice is not getting copied from Sales order

Hi,
In my case when i create a sales order...my VPRS condition is taking price 4.020,24 (@335.02/PC). When i create a Invoice it is coming with 4.020,22 value and .02 is coming in different condition type ZDIF ( Rounding diff) automatically. When i check my PGI accounting document there also price 4.020,22 hits the G/L account.
Now able to understand why .02 value is going in the ZDIF condition ?
Need help
Regards
Nitin

Hi Nitin,
Rounding condition is coming in picture because there will some difference in PR00 and VPRS.
Generally VPRS is a statistical condition type and it is just used for viewing purpose not a part of calculation.
So you can go to V/08, select your pricing procedure and then control data.
In that find out VPRS condition type and click on statistical, then it wont come in calculation.
If you want that this should be copied then you have to made changes in copy control.
Go to VTFA if you are making billing document with reference to order document.
Go to VTFL if you are making billing document with reference to delivery document.
Select your combination of billing document and delivery document/order document.
Then go to item level and select you item category and then click on detail
In that you will find pricing type just change that pricing type to D.
Now it will copy pricing as it is from sales order.
Hope so it will solve your problem
Regards
Raj.

Creation of Project from Sales Order

Dear All,
I am doing Customer Project.
My Client want to Create a Project Directly from Sales Order. I think we can do it using Assembly Processing. But, I have not worked on it.
If any one worked on this scenario kindly guide me in this case. Also, let me know any documents are avialble in this scenario.
Thanks and Regards,
Atul R. Rajmane

Hi,
Transaction Flow
As per prerequisite we need to create following:
1-       Standard WBS
2-       Standard Network
3-       Material
4-       Link between the Network, Material and Standard WBS;o
5-       Create Sales Order
Create Standard WBS
TCode : CJ91
Path: Choose Logistics ® Project management ® Basic data and then Standard structures ® Standard WBS® Create
After entering the data press enter.
Now select   icon to display the WBS element.
You can add / delete the WBS element here.
Remember that For All WBS Element, Operative indicator Account Assigned & Planning Element should be ticked. Billing element should be ticked for the WBS element that will be assigned in the allocation of material to Std. Network
Click on   icon to go back to the header.
Here release the WBS elements.
Make sure to release the WBS elements. (Remember without Release Status system will not allow to post any actual cost to new created project)
Create Standard Network
TCode: CN01
Path: Choose Logistics ® Project management ® Basic data and then Standard structures ® Standard networkà Create
Select the   icon to copy from Template.
Now enter standard Network (Which one you want to copy).
Here you will link WBS to Network.( it is very important to create a new operative project from sale order ) Then press Enter
Select the     for choose activities:
You can create activity here as per requirement.
You can maintain the relationship among the activities. Now Press the Total Tab :
Now here you can decide that under which WBS element activity will assigned .
Save the network
Create Material
TCode: MM01
Path: Logistics ® Production ® Master data ® Material master or Logistics ® Material management ® Material master and then Material and create (special or general)
Create material with using already exist material
Maintain the necessary setting in Material Master. (It is necessary for Assembly processing).
Select Sales ORG 1
Press the conditions :
The amount which enters here will be the sale value of material. During creation of sale order system take the sale order value from here.
Select the relevant Item Category Group.
Maintain Strategy in MRP3 View and save then Exit.
Assignment of Material to Network:
TCode: CN08
Path: Logistics ® Project management ® Basic data and then Standard structures ® Network parameters from sales order ® Edit.
Click the   icon to enter new line.
Here we will link material to Standard Network & Standard WBS.
Assembly Processing
Create Sales Order:
TC: VA01/VA41
Path: SAP Menu àLogistic àSales and DistributionàSalesàOrderàCreate
Select the Order Type / Sale organization and Distribution Channel
Enter
Enter the Required field like Ship to party, PO No. , Required Delivery Date, Material No. and Quantity .Then Press Enter.
Save the Sales Order and note down the Sale Order Number.
Sales order number will use the project number
Check in Project Builder.( CJ20N)
Now we can see that System has created new operative project in background.
And it has assigned activities to WBS accordingly.
**source-somewhere at SDN,i forgot.will try to find original source then post here for reference and proper acknowledgement*
regards.

How to create Subscription Schedule for a Contract created from Sales Order

Hi Gurus,
Need help in creating subscription contracts from Sales Orders.
We know that Service Contract is created from Sales Orders by adding covered item and service item as two lines in a Sales Order.
1. Does anyone know how to a create Subcription Contract by adding single item or BOM item(Model) to a Sales Order?
2. Can we have a BOM item created as Subcription item and reference this to the Service Item in the Sales Order, so that we get the Service Contract created with the BOM item as Covered line.
3. Whenever we create the Service Contracts from Sales Orders, the Billing Schedule Level is set to 'Top Level'. Can we get this changed to 'Equal Amount' by using any profile options.
Please advise as we are in a critial design phase and need to make a decision quickly.
Thanks,
Sid

Hi Mani,
I have a similar requirement but i need to transfer the values to the same page... what then. I have seen the developers giude and the example shows how to tansfer values to another page but no clues what so ever if i have to transfer them to the same page different region. Do u have any suggestions ....
Regards,
Amit.

Copy "Ship to party" from sales order to "Delivery addreess" in PO

Hi All,
when i create a Purchase Order in ref to the Purchase Requistion of the Sales Order, I want the Ship to Party address from line item of the Sales Order needs to get copied to the Purchase Order line item in "Delivery address" tab of the PO.
Please tell me the required configuration settings to achieve this.
Awaiting your responses.
Thanks in advance.
Rgds.
Anil.

Hi All,
This is a third party scenario. And in third party scenarios I guess the ship to party address from sales order will be automatically copied into the delivery address of the PO (Standard Functionality of SAP). But some how this is not happening and use to happen till the sixth week. Do I still need to check the enhancements given by the experts above? or we can achieve this with some configuration settings from schedule lines etc?
Rgds,
Anil.

PO Creation from Sales Order User Exit

Hi,
I have a business requirement where I need to create a Stock Transport Order (STO) for a particular kind of sales order. I outlined different options for achieving this functionality.
1. Trigger a workflow for creating STO.
2. Configure it an EDI output for sales orders. Using the EDI document, create STO in the same system.
3. Create STO using BAPI from the sales order exit 'USEREXIT_SAVE_DOCUMENT'.
I am trying to understand the issues if I go with option of creating STO from sales order user-exit. I tested it and it is working fine. But what concerns is me transaction integrity. In other words I am trying to execute another transaction within a transaction. Both Transactions (VA01 and ME21N/BAPI) may be trying to access same tables. Anyways I havent see any potential overlap.
I would like to know anybody implemented such a solution?
What could be the potential issues? Does it really affect transaction integrity?
Thanks A Lot
Anil

I would also be concerned with the possibility of the order failing to update AFTER you call the BAPI. You could create a custom output type that processes on order create for that order type. You could add your BAPI call to the processing routine of the output type.

Data Transfer from Sales Order to Purchase Requisition

We are trying to transfer data from Sales Order to purchase requisition in an individual purchase scenario.
We want to copy value in KUWEV-KUNNR in Sales Order and paste in CMMDA-KUNNR on purchase requisiton.
So in user-exit "USEREXIT_MOVE_FIELD_TO_ME_REQ" on include "MV45AFZB" we added the following code:
FORM USEREXIT_MOVE_FIELD_TO_ME_REQ.
DATA:   BEGIN OF IT_VBEP OCCURS 0,
        VBELN LIKE VBEP-VBELN,
        BANFN LIKE VBEP-BANFN,
        KUNWE LIKE VEPVG-KUNWE,
        END OF IT_VBEP.
DATA: BEGIN OF TI_VBAK OCCURS 0.
        INCLUDE STRUCTURE IT_VBEP.
DATA: END OF TI_VBAK.
    SELECT A~VBELN   B~KUNWE
      INTO CORRESPONDING FIELDS OF TABLE IT_VBEP
    FROM VBAK AS A INNER JOIN VEPVG AS B
                          ON B~VBELN = A~VBELN
    WHERE A~AUART EQ 'PDIR'.
   LOOP AT EBKN.
       LOOP AT IT_VBEP.
            IF IT_VBEP-VBELN = EBKN-VBELN.
              IT_VBEP-BANFN = EBKN-BANFN.
            ENDIF.
            MODIFY IT_VBEP.
       ENDLOOP.
   ENDLOOP.
*Break-point.
SORT IT_VBEP BY vbeln.
LOOP AT IT_VBEP.
IF EBAN-BANFN = IT_VBEP-BANFN.
    EBAN-KUNNR = IT_VBEP-kunwe.
    MODIFY EBAN.
ENDIF.
ENDLOOP.
* Example
* EBAN-LIFNR = zzfield1.
* EBKN-KOSTL = zzfield2.
ENDFORM.
*eject
Right now it turns random values on the purchase requisition field.
Edited by: Carlos Salazar on Sep 15, 2010 5:19 PM
Moderator message: please use more descriptive subject lines from now on.
Edited by: Thomas Zloch on Sep 15, 2010 5:26 PM
Edited by: Carlos Salazar on Sep 15, 2010 5:30 PM

Hi,
Why are you using only the following line to read the VBEP table?
WHERE A~AUART EQ 'PDIR'.
Shouldn't you be using a sales document number or something more specific than document type?
Regards,    Andy

Update Purchase Requisition from Sales Order

Hi,
My requirement is to Update Purchase Requisition from Sales Order based on the Vendor number in
Purchase Requisition .
I have used Userexit         :- MV45AFZB
                 Customerexit :- EXIT_SAPFV45E_002
                 BADI             :- ME_REQ_OI_EXT, ME_REQ_POSTED
for my requirement, but in vain.
Of these Userexit MV45AFZB, Customerexit EXIT_SAPFV45E_002, BADI ME_REQ_OI_EXT are getting triggered in Sales order creation but, Purchase requisition is not yet triggered and we dont have the VENDOR value with which i need to do perform some checks and update the Purchase requisition.
After I SAVE sales order, BADI ME_REQ_POSTED is getting triggered.Here, the purchase requisition is created ( not yet inserted into the database ) .I also have required VENDOR value, but in the given
BADI ME_REQ_POSTED I can make checks according to my requirement but not able to update the new values into purchase requisition.
Literally speaking, Iam struck up..Dont know what to do.....
Please let me know any Userexit/BADI/BTE where I can Update Purchase Requisition from Sales Order based on the Vendor number in
Purchase Requisition .
Thanks,
Shivaa..

Hi Max,
It just struck to me...
As suggested by you, I thought of calling BAPI BAPI_REQUISITION_CHANGE from user exit USEREXIT_SAVE_DOCUMENT in MV45AFZZ .
I f I give PReq no. , BAPI BAPI_REQUISITION_CHANGE will take the particular PReq no., from database and then change it according to our requirements...
But, in our scenario I am calling the BAPI BAPI_REQUISITION_CHANGE and passing a PReq no..which doesnt exist in the d/b itself.....
Anyways, let me try......
Meanwhile ,please suggest any other options for resolving the issue in question......

Standard COGS cannot be Transferred from Sales Order to Billing Document

I did a test in current client with the following steps:
Create Sales Order for Configurable Material -> Execute Sales Order Costing Run, marked and Saved the result via CK51 -> Create Prodcution Order for such Sales Order -> Confirm Prod Order -> Conduct GR per the Prod Order -> Conduct Goods Delivery for the Sales Order-> Create Billing.
(There is not any costing value during the whole process)
There are many Value Fields in the CO-PA document regarding to this billing, the value of standard COGS items(including Material Cost, Period Machine, Variable Labor etc) are also included and their value are expected to be transferred from Sales Order. However, in my testing, those COGS value failed to be transferred to Billing document. I am not sure whether there is any config related. (KEPC hs already been done in such case). Would any expert can help on that?

en, It is solved now. Untick "Transfer aux. CC Split" in KE40, then the value can transported to billing.
Edited by: Ying Zhu on Nov 18, 2008 1:10 PM

No revenue update from sales order

Hi
I have created SO with account assignment for a WBS billing element. In config I have make the indicator on for revenue value should automatically update from sales order.
But neither the revenue from sales order is updating in any of my PS report nor the actual revenue too after billing cycle.
Does it need some more customisation checking.Cannot find any solution from earlier similar threads.
Zinni

To analyze the error, proceed as follows:
1. Is an account displayed in the sales and distribution document in the condition detail screen (for example, condition PR00) ? Is there a cost element in this account and are you allowed to post sales revenue to it? (cost element category) If the answer is yes, then proceed to 5. If no, then proceed to 2.
2. Check the relevancy for billing of the sales and distribution document item in Customizing (-> Sales and distribution -> Sales -> Sales documents -> Sales document item -> Define item types). If 'Not relevant for billing' is entered, correct this. This will probably clear the error. If 'I' (according to billing plan) is entered, the system only updates sales revenues if billing plan dates exist in the sales document.
3. Check in Customizing that a billing type is assigned to your sales document type (-> Sales and distribution -> Sales -> Sales documents -> Sales document header -> Define sales document types). The billing type can be found in the 'Billing document' block. The relevant billing type depends on the defined relevancy for billing (see point 2). If no billing type is entered, enter one. This will probably clear the error.
4. Check in Customizing that an account determination procedure is assigned to the billing type determined in step 3 (-> Sales and distribution -> Billing -> Billing documents -> Define billing types). If no account determination procedure is entered, enter one. This will probably clear the error. If an account determination procedure has already been assigned, the error is probably caused by an incorrect structure of this plan. Check the plan.
5. You will probably not be able to correct this error yourself. However, you can provide some information beforehand. Enter parameter MCL in your user master record and valuate it with 'X' (upper case) (-> System -> User profile -> User parameters). You activate an user-specific TRACE function this way.
6. Change, for example, the pricing date or item value in the quotation or sales order and save the change.
7. Execute Transaction MC30 for your user ID (/NMC30). You now see a list of all data structures that were set up for the Logistics Information System (LIS) in step 6. Check whether structure S008 is contained in this list. This information is required to further analyze the error.
8. If structure S008 is contained in the MC30 log, call Transaction SA38, program name RKPSSHOW, -> Execute (F8), enter the number of the affected sales and distribution document and press -> Execute (F8) again. The output list (or the fact that no list is generated) is also needed for analysing the error further.

How to pass condition values fom sales order to packing list

Hi!
I need to show price amounts on the packing list printout from VL03N based on the condition value from the sales order document. Can anyone suggest how this can be achieved?
Thanks!
Cholen

I think I have found a solution:
- select vbak-knumv from sales order of delivery then select the condition values from table konv where vbak-knumv = konv-knumv.
One can filter by kschl (condition type) if only particular amounts based on condition type need to show up.

Read Valued from sales order configurator

Similar Messages

Maybe you are looking for