Read/write memory popups while using easydms

hi experts!
we actually get more and more windowserrors(in explorer.exe) while working with easydms.
so we decided to use windbg to locate the source of the problems...
cause we dont have the source code of easydms i hope somebody here can help us?
our last errorlog was: (problem occurs while logging in)
(de0.8c): Access violation - code c0000005 (!!! second chance !!!)
eax=035a3730 ebx=00000000 ecx=035a3730 edx=035ccfa0 esi=034585b0 edi=034585b8
eip=00000000 esp=0170b4e0 ebp=0170b50c iopl=0         nv up ei ng nz na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000             efl=00000286
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
00000000 ??              ???
0:022> k
ChildEBP RetAddr
WARNING: Frame IP not in any known module. Following frames may be wrong.
0170b4dc 01e61328 0x0
0170b4e4 01e61742 EasyDmsExplorer!ATL::CStringData::Release+0x19
0170b50c 01e65642 EasyDmsExplorer!ATL::CStringT<wchar_t,StrTraitMFC<wchar_t,ATL::ChTraitsCRT<wchar_t> > >::~CStringT<wchar_t,StrTraitMFC<wchar_t,ATL::ChTraitsCRT<wchar_t> > >+0x1d
0170b544 01e73ca3 EasyDmsExplorer!CRfcFunctionInfo::~CRfcFunctionInfo+0xab
0170b774 00700061 EasyDmsExplorer!CRfcCaller::OnLogon+0x956
0170b780 0031005f <Unloaded_hsip.dll>+0x6fffa0
0170b784 00000000 <Unloaded_hsip.dll>+0x30ff9e
any ideas what that can be ?
best regards
harald wiesinger
Edited by: Harald Wiesinger on Feb 2, 2010 2:17 PM

There might be issues here with addin.dll. Is the SAP note 1370364 implemented while makning rfc call in addin.dll? This is required. More over please reset RFC cache and see if your issue is still happening.
we need to reset cache only if
1.Change in function signature related to the functions in EasyDMS or change in the definition of parameters/fields (including nested fields) used in the respective functions.
2.Change in structures/tables used by EasyDMS(including nested/linked structures/tables)
3.Addition/activation/deactivation/renaming of new/alternate function modules/BAdI method implementation w.r.t EasyDMS.
There needs to be an RFC reset only if there is a change in function signatures/structures/tables w.r.t EasyDMS/DMS in the respective system. There is no need to reset the RFC cache if notes ate implemented which involves only an implementation logic change.
Someone has to manually reset the RFC cache. This can be also done centrally by executing EASYDMS_RESET_RFC_CACHE after the changes.
Data that is cached for RFC :Tables and structures and data related to function signatures (parameters/fields (including nested fields) ) associated with EasyDMS. Also the cache stores the list of active functions used by EasyDMS.
Advatages of RFC cache:- Fast execution.

Similar Messages

Automotive Diagnostic Command Set & kwp2000 Read/Write Memory By Address

I used NI Automotive Diagnostic Command Set 1.0 Read/Write EEPEOM By Address of ECU base VW TP2.0 KWP2000 diagnostic protocol . I used NI example ReadWrite Memory.vi but not successful. I know must use below step.
Description
The usual procedure for getting a security access to the ECU is as follows:
Request a seed from the ECU using RequestSeed.vi with access mode = n.
From the seed, compute a key for the ECU on the host.
Send the key to the ECU using SendKey.vi with access mode = n + 1.
The security access is granted if the ECU validates the key sent. Otherwise, an error is returned.
Who has used NI Automotive Diagnostic Command Set 1.0 and know VW TP2.0 KWP2000 protocol. Please support some suggest and example VI.
Thanks

I modify NI example Read/Write Memory lool at attached files.
Now I know how to calculate the key and successful.But sometimes ok and sometimes no ok. The best luck is pass three error.
Attachments:
pho0.JPG ‏99 KB
ReadWrite ECU.vi ‏66 KB
seedaddkey.vi ‏12 KB

I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full scree

I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full screen is there any way i can click on the attacment without going out of full screen

I don't know why the change, but the pointer appears in the same way as it does on the main screen, not a pointer. There does not appear to be anyway to change it. You may want to submit a comment to the Features Requests: Acrobat Feature Requests. I also submitted this as a bug.
As a clarification, your "adobe acrobat 11 reader writer" is not informative. There is Acrobat 11 and Reader 11. Writer is not a product as such. So you have referred to Acrobat in a contradictory manner. In the future, please just indicate Acrobat 11 or Adobe Acrobat 11.

[svn:fx-trunk] 11202: Make controlBarContent read/ write so you can use other states syntax besides includeIn

Revision: 11202
Author:   [email protected]
Date:     2009-10-27 14:32:23 -0700 (Tue, 27 Oct 2009)
Log Message:
Make controlBarContent read/write so you can use other states syntax besides includeIn
QE Notes: None
Doc Notes: None
Bugs: SDK-23386
Reviewer: Corey
API Change: no
Is noteworthy for integration: No
tests: checkintests mustella/gumbo/components/Panel, Application
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23386
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Application.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Panel.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Is it possible to read/write data from Salesforce using web service hub in Informatica?

Anyone from Informatica can asnwer this question please

Is it possible to read/write data from Salesforce using web service hub in Informatica? Not asking about PowerExchange for Salesforce or Informatica Cloud. Just using web service can we load data into Salesforce? Thanks ahead.

Memory Leak while using -Xrunhprof option in Linux OS

While using the follwing option in my application there is memory leak in JVM in Linux OS.
-Xrunhprof:heap=all,cpu=times,monitor=y,file=/home/gemini/dilip/www2.log,thread=yIs this a bug ??

Little lost here. Looks like you are facing memory leaks in Tuxedo 7.1 WS
client code when it talks with Tuxedo 6.x? Is this correct?
If so, try installing latest rolling patch for Tuxedo 7.1.
We recently fixed couple of memory leaks in interop area. One was related to
compression.
_shailesh
Scott Orshan <[email protected]> wrote in message
news:[email protected]..
If you are running with the latest patch, then report these problems to
Support, giving them sample code so that they can reproduce the problem.
Scott
Thomas Winter wrote:
Hi Scott,
as an additional information:
The guys at the server side changed something (their
formaly useing the old 6.3 libraries at server side)
and surprise... the client has no memory leak anymore.
But, if more than one thread at the same time use the atmi calls
there is still some memory consumption.
The workaround is to use a mutex object to make sure, that
only one thread use the atmi calls.
AFAIS Tuxedo has an Problem with Multithreading.
Thx
Thomas

Procedure for read/write an XML-File using UCCX9

Hi Team!
Is there someone who can explain me the procedure of reading/writing an XML-File using Cisco UCCX Rel. 9.0?
In the last couple of days I did a lot of research on the partner community as well as reading the CRS-Editor-PDFs.
But I can’t find a solution.
There are some templates available but they all didn’t seem to work.
I have two xml-files, both uploaded to “Document Management\en_us\”.
The script itself is attached to this posting.
I build that my script according to a sample script I found in the community.
From my point of view I have configured my script exactly like the sample script.
But it still doesn’t work.
I am especially interested in where to store the the appropriate files.
I would be very happy if there is someone who can explain me, what’s wrong there.
Many thanks in advance.
Kind regards
Michael

I'm experiencing the same issue [reading XML causes errors that say things from "no such file" to some odd Java exception.] I'm able to use a template XML file and after authenticating a user, transform the template into a proper XML file and then successfully save it to the en_US Doc Repository with updated values.
However, no matter what I've tried or who I've asked, the READ on the XML file so that I can actually script something that does some routing based on the value of the XML file created in my first script? Ultra fail.
I've even worked with three separate TAC IPCC engineers who were able to reproduce the issue in their test environment, but they were unable to assist. Eventually, whe pressed, I received this response from the last IPCC engineer.:
"Hello Brad,
Yes I know what I provided you with is what you already have achieved and this missing step is precisely what you need: how to setup the script to check the status and value of this XML document and then decide routing according to the state. But unfortunately this is what I found internally. The other resources are the ones you already know: support forums, scripting guides. The other resource with suggest to customer looking for script assistance is the Cisco Account Manager of your company, they know where to get the resources for such issues. Then again as I mentioned before on our phone conversation TAC does not support scripting but certainly if I find something else on my side I will let you know for sure."
I would do ponderous cartwheels of joy if someone who has this working in version 9.x [9.0.2 specifically] could share the deep magic.

Pls How do I read/write a xml file using java

I want to read/write trough a server/client a file.xml from evt. the same computer, this is the code for the client
import java.io.*;
import java.net.*;
class client
public static void main (String args[]) throws Exception
final String msg = "<beg>note</beg>";
// BufferedReader in = new BufferedReader(new FileReader("note.xml"));
final Socket clientSocket = new Socket ("localhost", 8000);
final OutputStream clientStream = clientSocket.getOutputStream ();
clientStream.write (msg.getBytes ());
// clientStream.write (in.getBytes ());
clientSocket.close ();
// BufferedReader in = new BufferedReader(new FileReader("note.xml"));
// System.out.println(in.readLine());
I want to read it and put it in a buffer...
please somebody help me!!!
regards
Harry

Pls read this:
http://forum.java.sun.com/thread.jsp?forum=31&thread=271751
And don't post the same message twice. It's annoying.

How to write processed XML while using XML DOM

How can I write a Document Node type element in a file i.e. if I have a document and I loaded in memory using DOM then I processed it.Now I need to write it back to file.how can I do that

Use a Transformer whose input is a DOMSource and whose output is some kind of Result which points at wherever you want to write the XML.

Out of memory error, while using Adobe InDesign

I have been running Adobe inDesign for a couple of years with no problems. This is the first time I got a, "Out of memory" error when attempting to save the document as a PDF.
Windows 7, Dell Studio XPS, 2.80 GHz Processor, Memory: 9 GB Dram, Hard Drive: 1.5 TB, 1.56 MB cache.
Firefox v33.02
What should I do to get back the memory?
Thank you,
Don Schaaf

Hi Don, is this an Adobe site you are using in a Firefox tab, or the stand-alone InDesign application?
If it's in the application, you may want to try Adobe's forum. You also could try closing other open applications to have them release memory and then try creating the PDF again.
Please note that if Firefox has been running for a long time and is using a lot of memory, it may take several minutes to release it all, as various files are (slowly) updated at shutdown. You can monitor its progress in the Windows Task Manager on the Process tab. Press Ctrl+Shift+Esc to open the Task Manager, and then click the processes tab. Firefox will be listed under firefox.exe here. Please allow it to shut down normally instead of using the End Process button, unless it appears to hang (no movement in the amount of memory used for several minutes).

Getting Out of memory error while using HashMap

Hi,
I'm using HashMap to have string as key, some object as value.
oHm.put(sKey, oMyVal); //oHM - HashMap
The actual number of entries i need to put is 200K....
Buy my program is not crossing even for 100K....
Its giving OutOfMemory error...... ( 1 GB memory, Win XP )
Any pointers to resolve this?
Thanks in Advance...
Ashok

Do we have any alternate other than increasing the memory for JVM?Did you read what I said on 8/04/2008 22:20 (reply 1 of 5)?
It's still the best looking option, especially if this large number is going to grow.

Memory fault while using impdp

I'm unable to import a database using impdp; as soon as I start the impdp cmd it errors out with a memory fault
I was able to previously import 1 TB out of a total of 3 TB, and then got an error related to the new MEMORY_TARGET parameter, complaining about insufficient tmpfs.
I resolved that error, and then after that I can't invoke impdp without the memory fault error as described below..
$ nohup impdp "'/ as sysdba'" JOB_NAME=LANCE_FULL_01 parfile=auexpdp.dat &
[1] 32118
$ nohup: appending output to `nohup.out'
[1] + Memory fault nohup impdp "'/ as sysdba'" JOB_NAME=LANCE_FULL_01 parfile=auexpdp.dat &
$
I also get the following error in the import log
ORA-39012: Client detached before the job started.
This is what my parfile looks like
directory=dmpdir
dumpfile=aexp1_%U.dmp,aexp2_%U.dmp,aexp3_%U.dmp,aexp4_%U.dmp
parallel=8
full=y
exclude=SCHEMA:"='MDDATA'"
exclude=SCHEMA:"='OLAPSYS'"
exclude=SCHEMA:"='ORDSYS'"
exclude=SCHEMA:"='DMSYS'"
exclude=SCHEMA:"='OUTLN'"
exclude=SCHEMA:"='ORDPLUGINS'"
include=tablespace
#transform=oid:n
logfile=expdpapps.log
trace=1FF0300
Has anybody seen this type of error before ?
Thanks

Pl post details of OS and database versions
>
$ nohup impdp "'/ as sysdba'" JOB_NAME=LANCE_FULL_01 parfile=auexpdp.dat &
>
You should not use '/ as sysdba' for expdp/impdp - use SYSTEM account instead - see the first NOTE sections in these links
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#i1012781
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_import.htm#i1012504
HTH
Srini

TS3274 Memory problems while using an App, please help

Hello. I have installed a game Real Racing on my iPad. It is been working fine but recently whenever I try to open the game a window pops up which says that there is not enough memory and i have to free some in order to play. But I seem to have plenty. I don't really want to delete the game as I am afraid to lose all the progress. I have tried rebooting and closing all other apps which run in the background but that did help. Perhaps someone knows how to resolve this problem? Many Thanks

My guess is the issue is not memory, but storage. Check Settings > General > Usage on your iPad, and make sure you have at least 15% of the total space free (you may need more for your game(s)). You can free up space from that area of settings.

After upgrading to Lion, the Finder will increase the virtual memory while using external HD

after upgrading to Lion, the Finder will increase the "virtual memory size" while using external HD. I check it using Activity Monitor and found that "Finder" wll increase the "Virtual Memory Size" and "Private Memory Size". and then after a while. the system told me my HD is full and hanging there.
My External HD is 1TB. and I have installed new version Paragon NTFS for Mac V.9.01. I am not sure it is related or not.
but I attached my external HD. the "Finder" will start to increase the "Virtual Memory Size".
please help out this case and solve this issue.
thank you !!!

The one has nothing to do with the other. Virtual memory size and Private memory size are used by developers to analyze their software. it has nothing to do with anything related to the user.

LabVIEW for memory read/write?

I know LabVIEW has In Port / Out Port vi for the I/O space read /
write. I am wondering if LabVIEW has read/write memory vi? As we know,
Windows 2000/XP do not allow to read/write I/O port and memory
directly from user level(kernel level is OK).

May be this post can be of interest to you (I haven't try this myself but it looks like a solution). Hope this helps.

Read/write memory popups while using easydms

Similar Messages

Maybe you are looking for