Reader 11.0.10 errors to "not responding" and seems to only partially load for my main user account.

I am running Windows 7 OS. I created a new user and it runs Reader fine so it is not a corrupted copy of Reader. I have gone through my services list and made a couple changes with no solution. I Started in diagnostic mode but still had the problem. I have uninstalled Reader and re-installed several times. I have uninstalled and run RegHunter to remove any registry problems and then re-booted and re-installed with no effect. How can this be corrected?

Please don't post the same question multiple times!

Similar Messages

"ls" not working and Finder displaying only partial list of files

On a PowerMac G5 2.5GHz with 10.3.9 client installed, I've come across a problem where, when trying to list the files in ~/Library/Fonts (i.e., the user's fonts folder, not the system-wide font folder) using the Unix "ls" command, it merely hangs for a short while (around 10 seconds) and then returns to the prompt without listing any files whatsoever. And using the Finder to do the same thing in the same folder only shows a partial list of the font files (no font files listed beyond those beginning with the letter "F"). This only occurs when trying to display the contents of the above directory--there is no problem listing the contents of any other directory using either "ls" in Terminal or the Finder, not even the /Library/Fonts directory. I am logged into that user's account as that user (he's a standard user) and not the admin user. This is a standard installation and there are no third-party installations (i.e., /usr/local doesn't exist; nor /opt). I have already deleted .DS_Store in ~/Library/Fonts and have rebooted the machine afterwards to no avail. Any ideas would be appreciated.

The code is now very expensive! but thats the result of avoiding the cd command. Right? Is there a max length for the ls and other commands? a limit of 128KB?
Mac OS X command line length limit is 256 kilobytes
Btw
done < <(ls -1 -d $myPath 2>&1)
Gives me, a known error. Happens a lot for me.
syntax error near unexpected token <
done < <(ls -1d $myPath 2>&1)
Are you using the bash shell? This is a bash shell feature. Does your script begin with
#!/bin/bash
So I did try to use a pipe
(ls -1d $__myPath 2>&1) | while read file
do
__filesArr[$index]="${file}"
#echo "filesArr$index ="${__filesArr[$index]}
index=$((index+1))
done
if [ -z "${__filesArr[*]}" ]; then # removed the 0 test, was never called.
echo "${__ErrHeader}Error - No files found" 1>&2
return
fi
But then, of course, I lose my variable (scope) outside the while loop
The while loop runs in a sub-shell, so when the while loop finishes, the filesArr disappears along with the sub-shell.
The < space <(...) notation in bash allows the while loop to run in the current shell, so filesArr will be visible after the loop finishes.
<div class="jive-quote">Anyway came up with,
done <<<"$(ls -1d $__myPath 2>&-)"
and that works, but why isn't your line working? Any idea?
The <<<word is a form of the "HERE DOCUMENTS". According to "man bash", the 'word' is expanded and supplied to the command on its standard input.
I have not played with <<<word with respect to spaces in file paths. If this works, then it would be similar to the < space <(...) for this example. But I did test < space <(...) to make sure spaces were preserved. You get to test <<<word for proper space handling.
<div class="jive-quote">Also why
(ls -1d $__myPath 2>&1)
instead of
(ls -1d $__myPath 2>&-)
Because 2>&1 comes from when I first learn shell scripting back in '85, so I'm more comfortable with it.
The last avoid/catch an error message when there are no matching files.
As always, thanks for your helpfull knowledge!

(06 Oct 14) updated firefox and Kaspersky, now have problems with Barclays site - firefox "not responding" and plugin error on trying to close. Help!

Updated Kaspersky to 15.0.0.463(a) - ( comes with "safe money" - now turned off).
Updated Firefox from (old) version to 32.0.3.
Barclays bank site loads properly, and allows access to accounts BUT when I try to look at a statement, Firefox "not responding" and a blank/ unresponsive page is displayed.
In order to acheive any movement I have to close firefox... this gives rise to windows wanting to send error data, and Firefox apologising for loosing the tab.
None of which allows me to do essential banking transactions.
It is this machine that has the problem - I can access without problems via work computer (using google Chrome)

My guess is that your statement is a PDF document, since banks and other companies often use that format for statements.
Firefox has various options for viewing PDFs, including a built-in PDF viewer (not as full featured as Adobe's), or the option to use a plugin such as Adobe Acrobat, or to launch the PDF in an external application. This article describes how to experiment with that setting: [[How to disable the built-in PDF viewer and use another viewer]].
On another subject, your plugin list has various plugins described as "Google Chrome Extension". I haven't seen that before. Could you review the list and see whether they really should be active in Firefox or can be deactivated?
Open the Add-ons page using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Plugins.
For those that are not essential, I suggest changing them to "Never Activate". This might not take effect immediately in that window, but should disable them in new windows.

I just subscribed to IHome but when it tries to gather information about my music library, I get an error message that my Itunes is not responding and then it shuts down. Has anyone else had this problem?

I just subscribed to IHome but when it tries to gather information about my music library, I get an error message that my Itunes is not responding and then it shuts down. Has anyone else had this problem?

Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue!

Download error server not responding

I keep getting a download error "server not responding correctly" when I try to download creative cloud. I had it on my old system, buy now I've installed a new hard drive and can't get creative cloud downloaded.

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

For the last two days, firefox has been freezing or Not Responding and giving error message

every 30 seconds or so firefox tells me it is not responding. and once it comes back it gives me the following error message.
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: http://cdn4.specificclick.net/img/?ag=1&pb=9788&pg=293059886053054629&us=IuOJnv_awGu5HD&nwk=1&rnd=53585:3534
I did install a java update, don't know if this is related.

It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

R9 280X Display driver not responding and has recovered error

Hi,
My new R9 280X OC Edition causes "Display driver is not responding and has recovered..." error. After this error, my game would hang. It also caused internet browser to crash.
It has been very frustrating, after 10 minutes of game play, the game would just crash. I have tried many way to try to solve the problem without success
I have.
1) Over clock/ lower the graphic card clock
2) install/reinstall latest ATI release/beta driver, reverted to driver that come with installation disk
3) update my motherboard bios
4) reinstalled windows 7
My PC Spec is
Windows 7 32 bit
4G RAM
Intel Core i5-2500K @ 3.3 GHZ
Any help would be appreciated. Thanks.

Use >>this<<
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (302.rar) and put the included file (TV277MH.302) on that stick.
Rename TV277MH.302 to 302.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 302.rom [ENTER] and let it flash the vbios.

My photomerge not responding and there is an error that says error 1: unable to create window.

photomerge not responding and there is an error that says error 1: unable to create windows. Internal error. line 364. var w = new windows (res)
Any help is highly appreciated.
The problem was solve by installing my PhotoShop Elements 9. I don't know why.
Ray

Signing in with a new ID creates a new iCloud account. However, each device is limited in the number of iCloud accounts that it is allowed to create. Once you reach that limit, you cannot create another account. All you can do is re-use one of the accounts previously created, or create a new account to use on another iOS device or Mac (running OS X Lion or higher), if you have one.

I am not able to open your answer for some reason my computer is not opening it in Explorer, it's not responding and I keep getting error messages and I don't know how to open it in another browser when Explorer experiencing issues. Heather

I am not able to open your answer for some reason my computer is not opening it in Explorer, it’s not responding and I keep getting error messages and I don’t know how to open it in another browser when Explorer experiencing issues.
Heather

If you have IE version 10 go to TOOLS and change the option to use Compatibility View

I am not receiving new emails on my phone. I am receiving a pop-up that reads "cannot get mail" saying my server is not responding and to check my settings. My settings are correct. Help!

Looking for help.... I keep getting a pop-up message on my phone stating that my server is not responding and to check my settings. My settings are fine. Any advice on what I can do to receive new emails on my phone? Help!

For a few weeks I have been using the GMail app on my iPhone 4S to get mail without problem. When I wanted to check something in Apple's Mail app, which has worked well for years, I now get a message for my principal email address that the server is "not responding," even though the same server is responding to my GMail app. For some reason, when I dismissed the message in Mail, it popped up again, but then could be dismissed. Did something change in Mail that requires some imap addresses be deleted and readded? Any idea?
I would not want to think that Mail is programmed to befuddle if it is ignored too long.

Why does mozilla firefox just randomly stop working in the middle of e-mail, games. reading articles or surfing. I get not responding and am getting very iritated

As I am doing things on any site and very randomly everything stops and I get the message that mozilla firefox is not responding and I have to wait up to a full minute before it starts again

-> [[Firefox hangs]]
* http://kb.mozillazine.org/Firefox_hangs
Check and tell if its working.

I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.

I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.
When I mouse over the icons, the rainbow appears as if it was processing something. The problem is eliminated when I restart my computer but it comes back after a while.
I guess I cant make a backup copy and restore the whole disk because the copy would be made with this error.
Can anyone help me? Anyone with the same issue?

Update: I was able to test out the HDMI adapter as well and the same issue occured. I'm stumped. 10.8.1 maybe.

Updated to v 4.0.1. when searching. FF says not responding and uses half a gig of memory

i have been using FF for years. it auto updated to 4.0.1 but now when i open FF. Do a search. as soon as i press enter system ram goes down and FF says not responding. and it uses 500mb RAM + and i have to force close. i have re-installed it and even factory rest my laptop thinking it was that. but Still the problem persists ??? i have gone back to a older version and that is working fine as i am using it to ask this question

Nothing is working and I can't find the Roboform toolbar. Your lack of direct support is really irritating- a live chat at least would be helpful.

Slow, not responding, and not compatible with java etc since updating to 6.0.2. Love Firefox normally but am not happy.

Since updating to Firefox 6.0.2 i have not been happy with the way it is running. It is incredibly slow, keeps telling me its 'not responding' and looking at my add-ons, seems incompatible with the java console, with skype click to call, etc. I also seem unable to look at complex 3d graphics online, which used to work fine. Now they end up crashing the system.
This is a big problem for me, and i have noticed (on your other forums on this website) that others are having similar problems.
Is there any thing i can do before this problem is eventually fixed by firefox?

i tried. like i said, only when i disable all i can watch youtube. i have not checked settings of extensions but i am not an it specialist. i probably would not know what to look for.

My IPod Touch 4 Gen will not respond and when I try to Restore it it gives me a code 1601 how do I fix it?

My IPod Touch 4th gen will not respond and when I try to restore it, it gives me a code 1601 how do I fix it?

- Try another USB port.
- Try on another computer
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

Reader 11.0.10 errors to "not responding" and seems to only partially load for my main user account.

Similar Messages

Maybe you are looking for