Reader 9 error in Visual Studio App
I am getting an error in Visual Studio when a pdf document opened in the IE WebBrowser. The error is the common memory error: "Instruction at "0x00000x000" referenced memory... "
The error only happens in with Windows XP (not Vista) with Reader 9. It worked fine from Reader 6-8. Since Reader 9, whenever I close the application with the X, not File/Exit mind you, I get the aforementioned application error.
Has anyone come across this? I am amazed that I cannot find much on this as it happens whenever you close IE with a PDF in any app.
Any ideas of how to deal with this other than just migrating back to Reader 8?
Thanks,
Gage
Yes, I have the exact same issue. I have submitted a bug to Adobe and downgrading to Reader 8 until this issue is fixed.
Igor
Similar Messages
-
SDK 9.1 Visual Studio App Wizard and VS2008
I have both VS2005 and VS2008 on my system. When I run setup.exe in 'Acrobat 9 SDK\Version 1\PluginSupport\Tools\Visual Studio App Wizard' the Version 9 template only shows up in VS2005. Is there a way of getting the template into VS2008? Are SDK 9.1 and VS2008 compatable?
SDK 9 is only supported with VS2005. Most things will still work in 2008, but the plug-in wizard was designed specifically for VS2005 and does not work with VS2008.
-
Visual Studio App Wizard won't install with Visual Studio 2005
When I try run the Visual Studio App Wizard from the Acrobat SDK V8.1 on my PC it tells me 'Please install Visual Studio 2005 before install Acrobat 8 Plugin Wizard'. I have Visual Studio 2005 installed with SP1. I also have the .NET framework 2.0.50727 SP1 loaded. I see this same problem on two different PC's with the same software configuration loaded. Any known issues with that?
I've never seen this happen. It's been a while since I last installed the
v9 SDK and it's plug-in wizard, so I don't remember how the installation
went.
I do most of my plug-in work on the Mac, where there is no plug-in wizard,
so I don't use it - not even on Windows. You do not need it to start a new
plug-in: Just use either the Starter plug-in from the samples, or the
BasicPlugin project. This will give you something that compiles and runs.
Then do a few simple text replacements to give things the proper names and
use that as your starting point. The wizard will give you a few more things
in regards to HFTs, but it's not complicated or time consuming to do that
by hand. The good thing about having to do this every now and then is that
it keeps your memory fresh about how HFTs work.
If you want to save yourself some time, create your own starter plug-in
that you mark up with comments about what you need to replace and why - put
all the stuff in that you usually need and then just use that every time
you need to start a new plug-in. Setting up a plug-in framework is usually
a very small portion of the time that you will eventually spent on the
plug-in development, so using the wizard will not save you much in the
overall development time.
Karl Heinz Kremer
PDF Acrobatics Without a Net
[email protected]
http://www.khkonsulting.com
On Sat, Nov 3, 2012 at 12:55 PM, Ramon F Herrera -
Source read joystick data with visual studio c++
Can Somebody give me a source for read joystick data with visual studio c++ ???
PLEASE SOMEBODY HELP ME !!!!!!!!!!!!!!!!!https://msdn.microsoft.com/en-us/library/windows/desktop/dd743687%28v=vs.85%29.aspx
https://msdn.microsoft.com/en-us/library/cc998459.aspx
https://code.msdn.microsoft.com/windowsdesktop/DirectInput-Samples-8ac6f5e3 -
Error in visual studio while implementing NHibernate
The "CheckPathAttributes" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.Tasks.dll'
or one of its dependencies. The system cannot find the file specified. Confirm that the <usingtask>declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask.
NHibernate </usingtask>
I am trying to implement NHibernate in my web application, I had coded everything but whenever i try to clean the solution it throws this error. Please help me out.
Sumit BhargavHi Sumit Bhargav,
Based on the error message, it seems that the issue is related to NHivernate and MSBuild, but
VS General Question forum discusses the usage issue of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor. In order to check where the issue is, could you please create a new and simple web application without having NHibernate, build it and clean the project?
Whether the web application can be built successfully?
If you get this error when you build or clean any solution, maybe you are experiencing the same issue
described here:
http://stackoverflow.com/questions/26930376/how-to-fix-checkattributes-task-could-not-be-loaded-error-after-installing-v
Please check whether the Microsoft.Web.Publishing.Tasks.dll assembly is located at
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web. If no, please copy it from somewhere else to this path. If you can’t get a copy of this assembly, I suggest uninstalling VS 2013 Update 4 or uninstalling and
reinstalling all VS components.
If the issue only occurs in the web app with NHibernate implement, then this issue is more related to the specific NHibernate implement in ASP.NET. I recommend consulting
your issue on ASP.NET forum: http://forums.asp.net/
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Javascript - Object required error for visual studio 2010
Hi - I have downloaded the crystal report RTM for visual studio 2010.
My App server is windows 2008.
We are using crystal reports as part of CRM application
I am getting javascript error 'Object Required' at the following line:
The debugger after the error message refers to this:
bobj.crv.stateManager.setComponentState('ctl00_ContentPlaceHolder2_CrystalReportViewer1__UI',eval('('document.getElementById('__CRYSTALSTATEctl00$ContentPlaceHolder2$CrystalReportViewer1').value')'));
The website has all the required aspnet_client files and have made sure the application is able to load them.
When tried with a new sample solution the reports work.
Please help. I need to make the crystal reports work with the CRM solution...I am assuming this is happening after you have deployed your app and that the app works as expected on your development computer(?). Please confirm...
I need you to tell me the following:
1) how was the app compiled; any cpu, 32 bit, 64 bit?
2) how was the CR runtime deployed (what MSI / MSM did you use?)?
3) if this app is installed under custom app pool see the following:
Deploy the CrystalReportViewers13 virtual directory as a sub-directory of your application.
Copy the Crystalreportviewers13 folder to be a sub-folder at the root of your application. You can configure where your application looks for this folder by using the following Help file [SAP Crystal Reports .NET SDK Developer Guide
|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip] and search the document for ("web.config";). In the section "Configuring your web.config file" follow the instructions specified for setting the resourceURI attribute. This way you can control updates to the viewers when deploying your application.
Note the resourceURI value is the name of the viewers directory and should be preceded with a Tilde
ie value="~/crystalreportviewers13"
Also, have a look at the following two articles. Both are pre CRVS2010, however the ideas re. deploying to a custom app pool still apply. All that changes is the folder name.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
Couldn't Download Cordova Plugin Error in Visual Studio
I am trying to install plugin for my cordova app in Visual Studio 2015 its giving error:
Couldn't download plugin.
If I tried to install it using CLI error is:
Current Directory is not cordova based projectHi,
Now, visual studio 2015 is a preview version. Please see the link below:
https://support.microsoft.com/kb/2996229?wa=wsignin1.0
The goal of this Preview version is to collect your feedback. To report a bug, please use
Connect
(https://connect.microsoft.com/VisualStudio/feedback/CreateFeedbackForm.aspx?FeedbackFormConfigurationID=5303&FeedbackType=1)
. You can also share your ideas and suggestions on UserVoice.
(http://visualstudio.uservoice.com/forums/121579-visual-studio)
Your quick thoughts can be shared by using Send-a-Smile
(http://go.microsoft.com/fwlink/?LinkId=517102)
through the Visual Studio IDE.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey. -
Errors in visual studio webpage code (Trying to connect the website to a database)
I am trying to create a website on (visual studio) and connect it to database(Microsoft sql server 2014) first I am learning from a video on youtube the tutorial is about a coffee website and database
I have a few errors but I dont know where is the problem
the errors in this page(Coffee.aspx.cs)
Error 1 Make sure that the class defined in this code file matches the 'inherits' attribute, and that it extends the correct base class (e.g. Page or UserControl). C:\Users\Ziyad 1\Documents\Visual Studio
2013\WebSites\MyWebsite\Pages\Coffee.aspx.cs 7 33 MyWebsite
Error 4 'ASP.pages_coffee_aspx.ProcessRequest(System.Web.HttpContext)': no suitable method found to override c:\Users\Ziyad 1\AppData\Local\Temp\Temporary ASP.NET Files\root\e78a0b4c\be391a08\App_Web_k4b10ys2.0.cs
572
Error 3 'ASP.pages_coffee_aspx.GetTypeHashCode()': no suitable method found to override c:\Users\Ziyad 1\AppData\Local\Temp\Temporary ASP.NET Files\root\e78a0b4c\be391a08\App_Web_k4b10ys2.0.cs
567
Error 5 'ASP.pages_coffee_aspx' does not implement interface member 'System.Web.IHttpHandler.IsReusable' c:\Users\Ziyad 1\AppData\Local\Temp\Temporary ASP.NET Files\root\e78a0b4c\be391a08\App_Web_k4b10ys2.0.cs
185
and here is the page (Coffee.aspx.cs) code
using System;
using System.Collections;
using System.Text;
namespace Pages
public partial class Pages_Coffee : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
FillPage();
private void FillPage()
ArrayList coffeeList = ConnectionClass.GetCoffeeByType(DropDownList1.SelectedValue);
StringBuilder sb = new StringBuilder();
foreach (Coffee coffee in coffeeList)
sb.Append(
string.Format(
@"<table class='coffeeTable'>
<tr>
<th rowspan='6' width='150px'><img runat='server' src='{6}' /></th>
<th width='50px'>Name: </td>
<td>{0}</td>
</tr>
<tr>
<th>Type: </th>
<td>{1}</td>
</tr>
<tr>
<th>Price: </th>
<td>{2} $</td>
</tr>
<tr>
<th>Roast: </th>
<td>{3}</td>
</tr>
<tr>
<th>Origin: </th>
<td>{4}</td>
</tr>
<tr>
<td colspan='2'>{5}</td>
</tr>
</table>", coffee.Name, coffee.Type, coffee.Price, coffee.Roast, coffee.Country, coffee.Review, coffee.Image));
lblOuput.Text = sb.ToString();
protected void DropDownList1_SelectedIndexChanged(object sender, EventArgs e)
FillPage();
also tis is the page (Coffee.aspx)code
<%@ Page Title="" Language="C#" MasterPageFile="~/Masterpage.master" AutoEventWireup="true" CodeFile="Coffee.aspx.cs" Inherits="Coffee" %>
<script runat="server">
protected void DropDownList1_SelectedIndexChanged(object sender, EventArgs e)
</script>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<p>
Select a type:<asp:DropDownList ID="DropDownList1" runat="server" AutoPostBack="True" DataSourceID="sds_type" DataTextField="type" DataValueField="type" OnSelectedIndexChanged="DropDownList1_SelectedIndexChanged">
</asp:DropDownList>
<asp:SqlDataSource ID="sds_type" runat="server" ConnectionString="<%$ ConnectionStrings:CoffeeDBConnectionString %>" SelectCommand="SELECT DISTINCT [type] FROM [coffee] ORDER BY [type]"></asp:SqlDataSource>
</p>
<p>
<asp:Label ID="lblOutput" runat="server" Text="Label"></asp:Label>
</p>
</asp:Content>
this is th (ConnectionClass.cs)code
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Collections;
using System.Configuration;
using System.Data.SqlClient;
public static class ConnectionClass
private static SqlConnection conn;
private static SqlCommand command;
static ConnectionClass()
string connectionString =
ConfigurationManager.ConnectionStrings["coffeeConnection"].ToString();
conn = new SqlConnection(connectionString);
command = new SqlCommand("", conn);
public static ArrayList GetCoffeeByType(string coffeeType)
ArrayList list = new ArrayList();
string query = string.Format("SELECT * FROM coffee WHERE type LIKE '{0}'", coffeeType);
try
conn.Open();
command.CommandText = query;
SqlDataReader reader = command.ExecuteReader();
while (reader.Read())
int id = reader.GetInt32(0);
string name = reader.GetString(1);
string type = reader.GetString(2);
double price = reader.GetDouble(3);
string roast = reader.GetString(4);
string country = reader.GetString(5);
string image = reader.GetString(6);
string review = reader.GetString(7);
Coffee coffee = new Coffee(id, name, type, price, roast, country, image, review);
list.Add(coffee);
finally
conn.Close();
return list;
(web.confg)code
<?xml version="1.0"?>
<configuration>
<appSettings/>
<connectionStrings>
<clear/>
<add name="coffeeConnection"
connectionString="Data Source=LOCALHOST\SQLEXPRESS;Initial Catalog=CoffeeDB;Integrated Security=True"
providerName="System.Data.SqlClient"/>
</connectionStrings>
<system.web>
<compilation debug="true" targetFramework="4.0">
<assemblies>
<add assembly="System.Web.Extensions.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
</assemblies>
</compilation>
<authentication mode="Windows"/>
</system.web>
</configuration>
and finally this is the SQL code
GO
CREATE TABLE [dbo].[coffee](
[id] [int] IDENTITY(1,1) NOT NULL,
[name] [varchar](50) NOT NULL,
[type] [varchar](50) NOT NULL,
[price] [float] NOT NULL,
[roast] [varchar](50) NOT NULL,
[country] [varchar](50) NOT NULL,
[image] [varchar](255) NULL,
[review] [text] NOT NULL,
PRIMARY KEY CLUSTERED
[id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
SET IDENTITY_INSERT [dbo].[coffee] ON
INSERT [dbo].[coffee] ([id], [name], [type], [price], [roast], [country], [image], [review]) VALUES (1, N'Café au Lait', N'Classic', 2.25, N'Medium', N'France', N'../Images/Coffee/Cafe-Au-Lait.jpg', N'A coffee beverage consisting strong or bold coffee (sometimes espresso) mixed with scalded milk in approximately a 1:1 ratio.')
INSERT [dbo].[coffee] ([id], [name], [type], [price], [roast], [country], [image], [review]) VALUES (2, N'Caffè Americano', N'Espresso', 2.25, N'Medium', N'Italy', N'../Images/coffee/caffe_americano.jpg', N'Similar in strength and taste to American-style brewed coffee, there are subtle differences achieved by pulling a fresh shot of espresso for the beverage base.')
INSERT [dbo].[coffee] ([id], [name], [type], [price], [roast], [country], [image], [review]) VALUES (3, N'Peppermint White Chocolate Mocha', N'Espresso', 3.25, N'Medium', N'Italy', N'../Images/coffee/white-chocolate-peppermint-mocha.jpg', N'Espresso with white chocolate and peppermint flavored syrups.
Topped with sweetened whipped cream and dark chocolate curls.')
INSERT [dbo].[coffee] ([id], [name], [type], [price], [roast], [country], [image], [review]) VALUES (4, N'Irish Coffee', N'Alcoholic', 2.25, N'Dark', N'Ireland', N'../Images/coffee/irish coffee.jpg', N'A cocktail consisting of hot coffee, Irish whiskey, and sugar, stirred, and topped with thick cream. The coffee is drunk through the cream.')
SET IDENTITY_INSERT [dbo].[coffee] OFF
I am still a beginner ~~ I need to understand what are these errors and how to solve themHello,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about website, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How do I fix this error in Visual Studio: The specified command ID does not exist
The entire error message is:
Error occurred in deployment step 'Retract Solution': The specified command ID 'Microsoft.VisualStudio.SharePoint.Commands.DoesSolutionWithIdExist' does not match any available SharePoint remote commands.
Parameter name: commandId
I'm developing an app for SharePoint Online using Visual Studio 2012. This error started after I created a developer site with "Spanish" as the language. Then I add "Spanish" to the "Supported Locale" in the appmanifest.xml
and tried to debug on the Spanish developer site.Hi,
Based on the error message, it seems the specific command ID not exists in the “Microsoft.VisualStudio.SharePoint.Commands” namespace.
For a better troubleshooting, I suggest you do as the followings:
1. Add languages to Supported Locales in AppManifest.xml.
2. Try to debug you app project to see if there are something wrong in your code.
Here are some detailed articles for your reference:
http://blogs.msdn.com/b/officeapps/archive/2012/10/12/locale-support-information-is-required-for-all-apps-in-the-sharepoint-store.aspx
http://srichallagolla.blogspot.in/2013/03/sharepoint2013-debugging-provider.html
Best Regards
Jerry Guo
TechNet Community Support -
Error Opening Visual Studio 2013 Please Help?
Hi, I just installed the program "Microsoft Visual Studio Ultimate 2013", I installed it using the on screen instructions successfully, it asked
me to restart the computer, I did and was very excited to use the software but when i opened it said that "An error occurred while starting for the first time. Please restart Microsoft Visual Studio." , I restarted the program and still the same
error occurs, I restarted the computer still did not work, I re installed the software like 10 times (no extradition), I tried to press the repair button still did not work after repair, I installed the update patch and still did not fix, I restarted my internet
and still did not work, i called Microsoft support team and no response (too expensive to call again) and still nothing worked.
I know that there is other versions available for this software such as professional but I am willing to purchase this product after it installs correctly
as this has all the features I really need... Please help
My computer specifications:
Operating system; Windows 7 SP1 x64 Bit
RAM: 4GB
HDD: 70GB (Allocated Partition)
Processor: Intel Core I5 3.40 GHz
I tired to be detailed as i can please i really need help urgently ASAP.
Thanks
Full Error Log can be found here;
(Image)
http://s23.postimg.org/vdt7hcw1n/fulldebugerror.png
MilanHi,
And from the log message you offered, you get the following error message:
Unable to cast COM object of type 'System._ComObject' to interface type 'Microsoft.VisualStudio.Shell.Interop.IVsProfileDataManager'
The
IVsProfileDataManager provides access to the profile manager and to programmatic control of settings. The error message turns out that you get a broken registration for IVsProfileDataManager.
Do you get any error message during the Visual Studio installation? You can use the
collect.exe tool to collect VS installation logs and upload the vslogs.cab file in the %temp% folder to the SkyDrive, then post back the link.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error during visual studio 2013 intallation on windows 8.1
After installing windows sdk 8.1, I've decided to install visual studio 2013,when it reached 70% of the installation process it stopped and told me that I have vGraphic data error(data redundancy) what is that??? and how can I fix it,this is the logs file:
vslogsI found numerous instances of "Error 0x80070017: Failed attempt to copy payload" in your install log.
For the error code “-2147024873” which is 0x80070017, it means “Data error (cyclic redundancy check)”. I recommend you run the Chkdsk.exe tool to check
the disk for errors:
Click
Start, and then click Run.
Type
cmd in the Open box, and then click OK.
At the command prompt, type
Chkdsk /f, and then press ENTER.
Press Y when you are prompted to check the disk next time that the system restarts.
Close all applications and restart the computer.
Note: During the restart process, Windows checks the disk for errors and then starts. -
Query Engine Error in Visual Studio 2005
Post Author: Chris K
CA Forum: Crystal Reports
I created a report in Crystal 11 and have included it in a project created in Visual Studio 2005. When I try to run the report in VS I get the message: "Query Engine Error: 'Error Code: 0x' Failed to open a rowset. Error in File" I can run the report in Crystal without any errors. The report has subreports and parametes. I am using a stored procedure in SQL 2005. I have included may other reports in this project and not had any problems. Any suggestions?Post Author: gandasi
CA Forum: Crystal Reports
I had an issue that sounds very similar - report worked beautifully in Crystal, but "failed to return rowset" when run from my application (which is not VS2005, but in my case that didn't matter).
Turns out that I had not given execute rights to the stored procedure to the public group in SQL server. I guess when running the report in Crystal it was using my Windows Authentication to logon or something which was why that was running OK.
I explicitly set the permissions on the stored proc to grant public execute, and the report would run from my app.
Hope this helps
Cheers -
Running an older Visual Studio app on Server 2012R2 can't connect to SQL Database
I have a database driven app written in Visual Studio 2005 or the release before.
It works fine on windows xp, 7x64, server 2008R2.
I installed on Server 2012R2, and it will not connect to the database. (which is a SqlServerExpress2014 database)
System>Runtime.InteropServices.COMException (0x80004005): [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified at ADODB.ConnectionClass.Open(String ConnectionString, Strin UserID, String Password, Int32 Option) an
####.ModGlobal.OpenDB()
1. My connection string is: Provider=SQLOLEDB.1;Password=XXXXX;Persist Security Info=True;User ID=sa;Initial Catalog=BuilderVT;Data Source=ENET-2012R2\SQLEXPRESS
> I created & verified this as in a UDL file with OLEDB Core Services- the connection tested OK.
> I used this same string on a Win7 system, and it connects to the database fine
> I tried connecting to an older database on another system, and it fails.
I suspect that there's a 32 to 64 bit mismatch, but, am lost at the momentMy connection string is: Provider=SQLOLEDB.1;Password=
Hello,
Please lookup in Windows Registry if you have a key "HKEY_CLASSES_ROOT\SQLOLEDB.1" and/or HKEY_CLASSES_ROOT\SQLOLEDB". If you have only SQLOLEDB, then remove .1 from the Connection string.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Read Azure AD in Visual Studio 2013
I am working on a Room App, which is simply used to let user know if the room is free/busy and display all the custom attributes along with room capacity. While using online Exchange I came across that capacity and custom attributes are stored in Active
Directory. So I thought of using Azure Active Directory, but again got stuck on how to use it in the code, as Call Graph API configuration and development in Visual Studio 2012 and 2013 is different. Can anybody help me or point me to a blog where I can configure
my application to use VS2013 and Active Directory.Hi,
I did went through exactly as mentioned in your link, but even there too, querying for the User details, didn't give me either the capacity or custom attributes. Please do let me know how to proceed further.
<fieldset>
AccountEnabled
<select class="tri-state list-box" disabled="disabled"><option value="">Not Set</option><option selected="selected" value="true">True</option><option value="false">False</option></select>
City
Country
Department
DisplayName
Board Room
FacsimileTelephoneNumber
GivenName
ImmutableId
JobTitle
LastDirSyncTime
Mail
[email protected]
MailNickname
boardroom
Mobile
PasswordPolicies
None
PhysicalDeliveryOfficeName
XXX
PostalCode
PreferredLanguage
State
StreetAddress
Surname
TelephoneNumber
UsageLocation
UserPrincipalName
[email protected]
UserType
Member
ObjectType
FU User
</fieldset> -
Database connection error in Visual Studio 2013
I am using Visual Studio 2013 and have installed MS SQL Server 2014. I am trying to generate my database from a model (edmx) but I get the following error: Cannot
connect to <Database>. An incompatible SQL Server version was detected (Microsoft.VisualStudio.Data.Tool.Sqleditor)
In the edmx.sql file, is written:
-- Entity Designer DDL Script for SQL Server 2005, 2008, 2012 and Azure
I can see that 2014 version is missing from this generated file, and seems that the program tries to connect to the 2012 version .. how can I avoid this and manage visual studio tu use the 2014 version of MS SQL Server? Thanks in advance
I already updated the SQL Server Data Tools to the newest version.Hello,
Please read the following article:
http://support.microsoft.com/kb/2858352/en-us
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Maybe you are looking for
-
Because of inactivity, your session has timed out, no longer active
Dear Experts, I am running 64 bit Redhat 5.5. I've installed the Oracle DB, weblogic and OBIEE. cat /middleware/Oracle_BI1/bifoundation/version.txt Build: 11.1.1.5.0.BIFNDN_11.1.1.5.0_LINUX.X64_110427.0752 Release Version: Oracle Business Intelligenc
-
Why doesn't Firefox have an ADM/ADMX GPO file?
I've been using Firefox for years, and it's always been my favorite browser. But working in our environment we push Firefox to our users, but we have no control of the software. Things we want to do are; allow pop-ups, disable auto-update, enable cer
-
I got mkv files but i can play those with quick time
I got the problem that I files on MKV mode and Quick does not play does kind of files and I got VLC player for Mac but since I upgrade to OS X Maverick my files do not work well I fix the partition I check for any problem with the hard drive but ever
-
I can hear the sound but i cannot see the picture its just black It doesn't work when I tried to fix it. In Verizon box, there is a red light on "relplacing batteries' I am not sure but I think that is the reason
-
I bought some 700mb, 80 minute empty discs to create a playlist for a friend, first off, I inserted the disc and highlighted all the songs I wanted in iTunes (31) and dragged them onto the disk, It then bought up a window for the disk with all the so