Visual Studio App Wizard won't install with Visual Studio 2005

When I try run the Visual Studio App Wizard from the Acrobat SDK V8.1 on my PC it tells me 'Please install Visual Studio 2005 before install Acrobat 8 Plugin Wizard'. I have Visual Studio 2005 installed with SP1. I also have the .NET framework 2.0.50727 SP1 loaded. I see this same problem on two different PC's with the same software configuration loaded. Any known issues with that?

I've never seen this happen. It's been a while since I last installed the
v9 SDK and it's plug-in wizard, so I don't remember how the installation
went.
I do most of my plug-in work on the Mac, where there is no plug-in wizard,
so I don't use it - not even on Windows. You do not need it to start a new
plug-in: Just use either the Starter plug-in from the samples, or the
BasicPlugin project. This will give you something that compiles and runs.
Then do a few simple text replacements to give things the proper names and
use that as your starting point. The wizard will give you a few more things
in regards to HFTs, but it's not complicated or time consuming to do that
by hand. The good thing about having to do this every now and then is that
it keeps your memory fresh about how HFTs work.
If you want to save yourself some time, create your own starter plug-in
that you mark up with comments about what you need to replace and why - put
all the stuff in that you usually need and then just use that every time
you need to start a new plug-in. Setting up a plug-in framework is usually
a very small portion of the time that you will eventually spent on the
plug-in development, so using the wizard will not save you much in the
overall development time.
Karl Heinz Kremer
PDF Acrobatics Without a Net
[email protected]
http://www.khkonsulting.com
On Sat, Nov 3, 2012 at 12:55 PM, Ramon F Herrera

Similar Messages

Logic Studio 9 upgrade won't work with my Studio 8 retail key

I recently bought a new Mac mini with Logic Studio 9 upgrade as I already own a retail box of Logic Studio 8. I just tried installing Studio 9 after a clean install of OS X 10.6.1 and it tells me my key is invalid, so I install Logic Studio 8 before trying again (which accepts the key and works fine) but the Studio 9 install still won't accept it. Has anyone else had this problem and who do I contact about getting this fixed?

it might ask you for the serial number of LP8(Logic Studio ) before installing LP9 (Logic Studio 2).
Could it be that it asks for that and you put the serial of LP9 there>?
Else call 0844 209 0611 it's £0.05p per minute when you call from a landline, the response is fast.
A

Final Cut Studio 5.1 won't install with new imac7,1 running Snow Leopard

Howdy
I bought Final Cut Studio 5.1 (FCP5, Motion2, etc) and tried to install on a very modern machine running snow leopard.
The machine meets all the system requirements, as far as i can tell, but when i click to install, i get the following:
Alert
Your computer does not have the hardware required to run this software. See the Read Me for details.
Is this a graphics card issue?
Obviously i'm a bit annoyed because the of the costs and i thought a high-end computer would be able to run this 5-year old software package.
If anyone can advise me of a way to circumnavigate the problem using the tools i already have, i'd be very appreciative.
Thanks!
ALB

Hi, thanks for replies.
It was bought from a reseller and is version 5.1.
I was under the impression that you could only upgrade if you had a previous version of FCS installed. Since i cannot install the version i have, i cannot upgrade.
I did try the 'esc' key but it didn't have any effect at all - this is a good tip though, so thanks for the idea. I'm sure one day i'll need to use it.
I'm close to admitting defeat and selling it on again, but if there are any FCS experts out there with a fix, that'd be super awesome!

SDK 9.1 Visual Studio App Wizard and VS2008

I have both VS2005 and VS2008 on my system. When I run setup.exe in 'Acrobat 9 SDK\Version 1\PluginSupport\Tools\Visual Studio App Wizard' the Version 9 template only shows up in VS2005. Is there a way of getting the template into VS2008? Are SDK 9.1 and VS2008 compatable?

SDK 9 is only supported with VS2005. Most things will still work in 2008, but the plug-in wizard was designed specifically for VS2005 and does not work with VS2008.

Move a Excel 2010 Dokument Addin Project (Visual Studio 2012) to another devleopment machine with Visual Studio 2012 , but Office 2013

Hi
we do have the following situation
on computer A there is a Excel Document Addin development project , Visual Studio 2012, Office 2010 installed. All works fine.
we would like to bring the project to another machine with Visual Studio 2012, but Office 2013 installed.
Visual Studio can not build the project. It says that the application is not installed on the machine (though Excel 2013 is installed , but not Excel 2010) It seems to have a problem with the
vbproj.
In other forums I found a hint that "Hostpackage = ..} needs to be set accordingly in the vbproj. I created then a "empty Excel-Addin project" under Visual Studio , looked at
the Hostpackage entry, put that into the vbproj of "problem project. It still does not work.
It would be great if anyone could help.
Thomas

Hello Eugene
Problem is that it says that projectboard (the name of the main project) can not be loaded. All other projects in the solution can be loaded. Strange thing is , now that I try to create a empty excel Project it says that according to Excel security settings
it can not be generated !?
I opened then Excel and set all Trust Center settings to "Default" - but no effect. I really have no idea what is wrong ..!?
Tom

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs fine, iPod found, no iPhone 5 b/c no AMDS. Error "insufficient premissions to install AMDS" Tried numerous uninstall / reinstall combinations, installed iTunes as administrator, etc. Somethings not right. What the Heck ?

See the following article for dealing with Apple Mobile Device Services: http://support.apple.com/kb/TS1567
Downloading and installing iTunes will not fix this problem. If the other troubleshooting steps do not work, go to the Control Panel and uninstall iTunes, Apple Mobile Device Services, Quicktime and any other Apple program that might be present. Reboot your computer, then download and install the latest version of iTunes.

CNA 6 InstallShield Wizard will not install with a JVM not found message

I ran CNA 5.5 up until last week when Java 7 71 update hit. When I tried to launch, I received JVM Not Found, that was all. So I figured it was time to install CNA 6, however during the install process I now get a pop up box stating InstallShield Wizard will not install with a JVM not found message. No other error messages, no logs, and the installation ceases. Tried installing CNA 5.8.9.1, and CNA 5.5 again, all stop at the same point with the same message. Anyone else see this issue?

When you start Network Assistant, Java determines whether the resources it needs are available. If they are not, Java displays the message Could not create Java Virtual machine, and the session ends. To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:
JVM_MAXIMUM_HEAP=1024m
Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m , and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.
If the Network Assistant InstallShield wizard fails to start, it is likely that the temporary folder location defined through the environment variables TMP and TEMP has some problem. Assigning a correct temporary folder location can fix such problems.
Source: http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html#pgfId-840748

App won't install with the prerequisite SAP Crystal Reports Runtime Engine

On installing with the following prerequisite checked:
SAP Crystal Reports Runtime Engine for .NET Framework 4.0
.. received this error:
Crystal Reports for .NET Framework 4.0\CRRuntime_32bit_13_0.msi
has changed since it was initially published.
Should I NOT use the prerequisite, and instead, use a merge module?

I ran a program with the exact same name, 2 weeks ago, on my VS 2010 Dev machine:
CRforVS_13_0.exe. (284 Meg)
Today, I followed your link, and downloaded the file with the same name, but different size: (1.5 Meg). I mean, a really major difference in size!
Because creating and testing installation packages is very time consuming, I want to verify what you have stated so that I completely understand before I change what currently works, which is for the client machine to separately install the CR runtime, to what you're proposing in including a prerequisite to my install package.
-> I should run this latest exe. It will add a prerequisite to the prerequisite list in Visual Studio 2010. The installation of this prerequisite will work, as the earlier one did not. And it will work for both 32- and 64-bit client machines.
Therefore, I can eliminate the need for the client machine to install the CR run time separately.
Please confirm, and then I will make the necessary changes, and do the install tests on client machines.
(Also, FYI the merge module did not work for me on a 32-bit client machine. So I removed it.)
Thanks, Peg

Where is the fix already? Logic Pro from the APP store won't install!

Who do you contact concerning an app store purchase that seems to be causing problems throughout the community with zero response from Apple as to the solution? I just bought Logic Pro (long time Logic Express user). It won't Install PERIOD - It is stuck in an endless loop of downloading the additional content required for it to run.
1) This 2.0G download completes -
2) I am prompted for my administrative password and Logic then closes.
3) When opening the app again - it wants to download again.
I have been through this twice. Reset permissions and rebooted before the second time. I have reinstalled Logic as well. APPLE! - Please tell me how to fix it or refund my money asap. And me having to do a bunch of jacking around with my system is NOT the answer.

Update:
This link
http://dl.dropbox.com/u/2972851/logic-downloads-fixed.html
has all the individual download packages, and on the second try, I was able to install the big "additional pro content" package from here. No guarantees, but at least you only need to download each one once, so if it fails you don't have to wait again.
Good Luck!

Adobe acrobat 8 won't install with Indesign and Dreamweaver CS4

I have a client who I had to build a new computer for which is Windows XP Pro. On her original machine I had AA8, InDesign CS4, DreamWeaver CS4, Contribute CS5, Adobe Reader 9.3 and Adobe Photoshop 6. I have tried puting AA8 on the new machine that has all of the above on it and I get a response that I have a newer version of AA and it won't install. I don't have any AA on this machine so I'm not sure what to do. She says she can't edit PDFs or combine them and that she can't create a PDF ind Word and Xcel and edit them. Should I tell her to upgrade to AA9 so that it is compatible to the CS4/5 products?
Thanks,
Lgarn

Thank you Bill for replying.
I have been able to install the disc but it tells me that I have to activate it with a time limit of 30 days and counting. Activation fails each time I've tried. As I'm nearing the end of the time limit I decided to contact Adobe for advice. They gave me a download package and new serial number but it's only suitable for OS XP and Windows 2000 so I'm unable to download it. I was told by the advisor if I still had problems to use the forum as a means of support so that's why I'm talking to people here.
I have uninstalled Adobe Acrobate Pro 7, so I might try reinstalling the disc to see if it gives me another 30 days grace, that, at least, would be a way around it.
I'll now follow the link you've given me. Though I do suspect I'm in a bit of a cul de sac.

New Mac Pro Won't Work With Old Studio Display

Hi,
Just got a new Mac Pro Desktop 8-core only to find out my old Apple Studio Display 17" won't work without a $100 adapter. We're thinking of just buying a new monitor instead. My question is will other brands now work direclty with the new Macs - or would they also need adapters? Is a DVI port the same as a DVI-D port?
Thanks for any info...

Thanks so much for the response, Malcolm, I really appreciate it! My old monitor is an LCD, but what we decided to do is since the adapter we found (and HAD to get from Apple directly) was going to cost $99!! We went and bought a brand new Dell monitor instead for $238 - it's fully compatible with the new Mac, and it's 23" (my old one was a 17") - so all's good!
Thanks again,
Jacki

Is the Oracle apps R12 can be installed with domain name like xyz .co.nz

Dear all,
I am installing R12 on Linux AS-4
I need to know the Oracle apps can be installed with domain name like <xyz>.co.nz on Linux AS-4 environment.
if so please discuss anything other than normal procedure I have to take care?
Till now I have installed much with Domain name as <xyz>.com
Thanks and regards
Vasu

If your domain name has two characters, then you may run into the Microsoft IE 6 bug "Internet Explorer Does Not Set a Cookie for Two-Letter Domains" described in Microsoft article Q310676. The fix for this issue is described in the Microsoft article.
Internet Explorer does not set a cookie for two-letter domains
http://support.microsoft.com/default.aspx?scid=kb;en-us;310676
Apart from the above, you should not have any issue.

EMbedded Visual C++ 4.0 won't install

I'm trying to install eMbedded Visual C++ 4 to get the support files needed for the LabVIEW PDA. I went to Microsoft and downloaded (224MB!!) the self extracting zip titled eVC4.exe. I unzipped all of those files into a folder and found the setup file as expected. Here's where it gets weird, I double clicked the setup file and followed the prompts. After I entered the product key the setup program brought up the unzip window and asked me to unzip eVC4.exe. But that's the very file I just downloaded and unzipped to get to the setup program currently running! I went ahead and unzipped it again anyway and while it was unzipping the setup program came back with the message "Could not locate setup" and aborted. I've tried this several times now with the same results. Has anyone else experienced or resolved this?

Hi Jim7215
It seams to be a little bit strange.
As far as I know the evc file is a self extracting archiv.
Normaly it extracts it self anf installs evc. It might be
nessesary to have admin rights on the computer you
work with while installing the C compiler.
With kind regards
Martin Kunze
KDI Digital Instrumentation.com
e-mail: [email protected]
Tel: +49 (0)441 9490852

CreativeCloud won't install with errorcode (1): Can't install CreativeCloud-Desktop

Yeah,, so it won't install for my trial, and I don't know what to do. Look at the title for the information the error-code gave me.

clean and then try installing per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Mac App store won't install on dock after update to 10.6.8

Hi All
I am running OSX 10.6.8 and have tried numerous times to get the App store icon to install...I am at the point of pulling my hair out, I'm so frustrated. I've installed the 10.6.8 update combo....
I've got 2.4GHz Intel Core i5, and 4GB macbook pro
I want to be able to upgrade to Lion, but of course need the App Store icon to get it!
Any help will be great!
Thanks!

Thanks Matthew,
Its not in the Applications folder, and all I have on the Apple Menu is;
About this Mac
Software Update
Mac OS X Software
System Pref, dock etc
I don't have the App Store in the Apple Menu at all..
Any other suggestions?

Visual Studio App Wizard won't install with Visual Studio 2005

Similar Messages

Maybe you are looking for