Reading a file in the server where the Applet is created

Hi,
I am writing a Java Applet that needs to read a .txt file to get some data. I am using Windows environment. I have read that in order to allow an applet to read from a file under Linux one needs to set in ~\.hotjava\properties acl.read="path of the file I want to read". But how should this be done under Windows. I have no such .hotjava folder and it seems I cannot create one since the . is not allowed in the filename. Any hint?
It would otherwise be very welcome a piece of code that reads from a file and store the file lines in a string array.
Thanks so much

The examples you have seen do not apply to the java runtime environment versions 1.2 and later, take a look at:
http://java.sun.com/security/signExample12/
http://java.sun.com/j2se/1.4.1/docs/guide/security/index.html

Similar Messages

Writing a file in a server(where the archive is not deployed)

Hi,
I have an application that is to be deployed in the server1.Using the same application that is running on server1 i need to write a data to server2.Can u give the code that can help me to do this.
Both the machines are LINUX machines.so what is the path that is to be specified for my filewriter.
There is no problem in writing the data to a text file in the server1(where the archive is deployed).

ADF has nothing to do with tracking browser close buttons. What you can do is call a JS function and call the method which deletes the file from within the JS function. ADF has a component for calling java code from JS call.

Can I access a file on a server where the path is password protected?

I have a file stored on a computer in a remote location. This file must be accessed by multiple test computers to update the test results. I need to access the file to collect the results. Currently, I have to log in to the remote computer via file manager and tell file manager to remember the password so that LabVIEW will be able to access the test result file. Is there a way that LabVIEW can do this? I do not want the test computers to remain logged in to the remote computer, as someome may be able to accidently corrupt the file.
Thanks.
Solved!
Go to Solution.

This question has come up before. Did you try a search? You can use the "net use" command via System Exec to mount the network share, and then you can disconnect it. Do a search on "net use", or just type "net help use" at a command prompt.

Xmldom.writetofile - writes it only in the server where the database is....

Is there a workaround that i can create the xml file outside the database server?

You can use java or whatever client technology tools you are using should support some sort of XML processing.

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server wher

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?

Hello,
Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
~Deepak

Applet can't read local file on web server, security issue!

There is any way to read/write files of web server through the applet except the Signed Applet.
If any idea the reply me soon.
Thanks in advance

Applets are downloaded from web servers and execute on the client machine.
Therefore they have no access to the web server file system, signed or not.
They could have access to the client file system (the machine where they run),
but for security reasons only signed applets have this privilege.
So to answer your question, you sign if you want to access client files.
To access web server files, you don't need to sign the applet, but you need
to provide some method of accessing files remotely, for instance:
- Files published for the web can be read using HTTP
- Files can be read or writen with the help of an FTP server on the same machine as the web server
- A servlet running on the HTTP server can collaborate with your applet to exchange files

What are the commands available to read a file from application server and

What are the commands available to read a file from application server and store the file into an internal table?

Hi,
To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
OPEN DATASET dset FOR INPUT IN BINARY MODE.
. If a non-existing file is accessed, an exception that can be handled can be triggered.
Influence of Access Type
Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
Influence of the Storage Type
The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
System Fields
sy-subrc Meaning
0 Data was read without reaching end of file.
4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b>

Can't access a website I use every day...the server where this page is located isn't responding :-(

Hi, I am trying to access the website bloglovin.com which I access everyday (as part of my job) with no problems, however, the last 2 days I have not been able to get on to the site. After waiting for ages for it to load I eventually get the message ' the server where this page is located isn't responding'. I've tried to access from both my macs and my iphone and I get the same message on all of them. Is this a problem with my mac or their server?

Thanks for your reply. I did infact get it working earlier today by putting the IP address into the browser instead of the URL and it solved the problem, however, I now have the same problem again tonight. I've tried restarting the router and it hasn't made any difference. Putting in th IP address isn't working this time either!

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

How do i fix this: error message- index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the ser

that is...
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
index.html
thanks!

It's under More Options triangle in the Manage Sites panel. See screenshot:
Nancy O.

Upload a csv file in application server with the specified codepage(Poland

Hi,
i want to upload a csv file in application server with the specified codepage ( for poland ) , please let me know how to use open dataset for that.?
Anurag

I would upload the file with transaction CG3Z in binary mode and do the code page translation with a report: read from server an save with different name.

How to Post a file(Flat File ) into Application server of the XI(AL11)?

How to Post a file(Flat File ) into Application server of the XI(AL11)?
Best Regards,
Jose

Hi,
1) goto SXDA_TOOLS Transaction code
2) Provide the Following details
Object Type : DXPROJECT
Program Type: BAPI
Program/Method: CREATE
3) Click on Copy Button
4) Select the Source as Presentation Server
     a) Select the File where you saved in your Local machine
5) Select the Target as Application server
     a) Check the check box Remote Server
     b) Select the File type as Physical
     c) In File name give /usr/sap/SSD/DVEBMGS00/work\Your file name (This the Server path
Where the file is going to save)
6) Click on Continue
Go to AL11 and check whether the File has been create in the following path /usr/sap/SSD/DVEBMGS00/work
Provide this path in the Communication channel path when you select the Transport Protocol as NFS and you place the file in AL11 directory.
Regards
Seshagiri

TS1402 I can not copy any files from the server & from the Finder. System MAC OS 10.7.5

I can not copy any files from the server & from the Finder. System MAC OS 10.7.5
<Email Edited by Host>

Hi, what is the no boot directory found about???
Can you give details step by step of what you're trying?

Safari can't open the page because the server where this page is located isn't responding

so i try going to gamefly.com and when i get to the website it won't let me browse the website or get into my account unless i'm useing my iphone with 3g i get the error message safari can't open the page because the server where this page is located isn't responding i tried it on every mac i have n its the samething i clear'd out my cache and cookes and even used different web broswers n still the same is there anyway to get this resolved i would be much aprecited thanks in advance.

Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window:
curl -I http://www.gamefly.com
Press return. You should almost instantly get several lines of output below what you entered, the first of which begins with something like this:
HTTP/1.1
If there's no output within ten seconds, consider that a failure. You can then quit Terminal. Post your results.

Writing a file to the server using an applet...?

Hi,
I've been searching the web now for almost a day trying to find some help in how to do this... The biggest problem is that I'm kind of a newbie (not a total beginner, but this is the first time I've ventured into applet creation)
What I'm trying to do is writing a simple web-page updater... i.e. This is what it should be able to do:
1) Read HTML page and parse it so that I can change the important parts (the info on the page, not the actual HTML code) - DONE
2) Present the information and let the user change it as (s)he sees fit - DONE
3) generate the new HTML and write it back as a file on the server (replacing the old one) -- PROBLEM -- :)
I think (!?) that I should be able to do this using the HttpURLConnection() POST method in addition to a PHP script on the server moving the file around once it's been uploaded. I don't, however, have a clue as to what the code should look like to accomplish something like this...(as I've never used it before, and can't seem to find sample code that would be even close to what I'm trying to do)
How can this be done? Also, is there a simpler way of doing this?
Thanks for taking the time to read that :)
-NRGizeR

as I said, I will gladly take suggestions :)
again, I'm new to all of this and I don't really know what things in java (or any of the script languages for that matter) can or cannot do...
Even if there is a better way, I would still know if this is solvable tho (I just want to get my head straight after banging it against this wall for the past few days) :), but as I said, any suggestions would be appreciated...

Reading a file in the server where the Applet is created

Similar Messages

Maybe you are looking for