Reading and storing data in an array

I'm trying to write a program to read in a list of numbers, store them in an array and then output them in ascending order.
I've written the following so far but when executed, I got this error...
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 100
     at ReadingAnArray.main(ReadingAnArray.java:30)
Could someone look at this and tell me where I went wrong?
int[] numList = new int[100];
          int number = 0;
          int count = 0;
          int i, j;
          int temp;
          System.out.println("Enter up to 100 positive integers ending with " + SENTINEL);
          number = console.nextInt();
          while (number != SENTINEL)
               numList[count] = number;
               count++;
          for(i=0; i<numList.length; i++)
               for(j=i+1; j<numList.length; j++)
                    if (numList[i] > numList[j])
                         temp = numList;
                         numList[i] = numList[j];
                         numList[j] = temp;
          for(i=0; i<numList.length; i++)
               System.out.println(numList[i]);          
When clicking on the error message, it points to the code line numList[count] = number;Any help is very much appreciated.
ntjava
Message was edited by:
ntjava
Message was edited by:
ntjava

Here's my snippet of code so far. If I entered 12 1 26 15 34 75 -999, it will fill the first 94 lines with 0 and the last 6 in ascending order like
0
0
1
12
15
26
34
75
How do I get it to fill the first 6 elements of the array with my numbers and skip the rest?
     System.out.println("Enter up to 100 positive integers ending with " + SENTINEL);
          number = console.nextInt();
          for(count=0; count < numList.length; count++)
               while (number != SENTINEL)
                    numList[count] = number;
                    count++;
                    number = console.nextInt();
          for(i = 0; i < numList.length; i++)
               for(j= i+1; j < numList.length; j++)
                    if (numList[i] > numList[j])
                         temp = numList;
                         numList[i] = numList[j];
                         numList[j] = temp;
          for(i = 0; i < numList.length; i++)
               System.out.println(numList[i]);          
Message was edited by:
ntjava

Similar Messages

  • How can i Read and Delete data in Infocube

    Can some help me how to read and delete data in infocube before loading data from direct DSO.
    I should be able to read and delete condition with combination (0FISCPER, 0COMP_CODE).
    Let us say we load JAN, comp _ code : 0001 (10 records )and JAN comp _ code :003 (30 records ) and JAN, comp _ code : 004 (20 records ) to infocube
    second time if DSO gets data of JAN, comp _ code : 0001 (40 records ) it doent need to be 10 old + 30 new, it can be 9 old 21 new lay i need to delete 1 old rec which i dont need. so that is the reason i want delet all JAN, comp _ code : 0001  recods before loading.
    Can some one help me

    Hello,
    You could use the selective deletion available with the cube to get the selective data for 0FISCPER, 0COMP_CODE combination deleted.
    If you go in the manage of cube & Content tab, you would find the selective deletion option at the bottom of screen.
    If you enter the option, you could give your selections for deleting the records and run the job.
    Please let me know if you need any more help.
    Regards,
    Pankaj

  • Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

    Hi
    how to create a external content type for  Read and Update data from two tables in  sqlserver using sharepoint designer 2010
    i created a bcs service using centraladministration site
    i have two tables in sqlserver
    1)Employee
    -empno
    -firstname
    -lastname
    2)EmpDepartment
    -empno
    -deptno
    -location
    i want to just create a list to display employee details from two tables
    empid firstname deptno location
    and same time update  in two tables
    adil

    When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list.  When I attempt to edit it, I get an error:
    External List fails when attached to a SQL view        
    Sorry, something went wrong
    Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
    I can edit the view in SQL Manager, so it seems strange that it fails.
    Any advice would be greatly GREATLY appreciated. 
    Thanks,
    Randy

  • How to read and write data in to a specified range of cells(it include multiple row & columns) in excel

    How to read and write data in to a specified range of cells(it include multiple row & columns) in excel

    CVI Comes with a sample project that explains how to read/write to a Excel file: choose "Explore examples..." in CVI welcome page and navigate to <cviSampleDir>\activex\excel folder where you can load excel2000dem.prj.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • JSP read and write data in MS-SQL database

    I am new to JSP. I need to write JSP page to read and write data in MS-SQL Database. I wonder if it is different from other database. I couldn't find useful pointers in the web. Please advise. Thanks!!

    Sure, SQL Server is different from Oracle is different from MySQL is different from...
    But all of them can be accessed using JDBC:
    http://java.sun.com/docs/books/tutorial/jdbc/
    Maybe you should learn about that for starters.
    You can use SQL tags from JSTL in your JSPs. I'd recommend JSTL highly. No scriptlet code that way. - MOD

  • Read and write data from content repository .

    Hi All,
    We are using content repository to store some document and images on web center server .
    So we have created/setup a content repository on web center .
    Please proivde me some documnet /wiki page to get some idea how can i read and write date in
    content repository .
    You are most welocme to provide some idea /suggestion .
    Thanks,
    Arun.

    Have you already configured webcenter spaces so it can use content server?
    Have you installed the content server seperatly from webcenter or as a part of the webcenter installation?
    Check if you have the webcenter spaces component installed in content server because without i don't think it will work...
    If you already have configured UCM to work with spaces it's quiet easy.
    From your groupspace, open the settings page of your groupspace. Go to the services tab. In the left hand side you can enable the documents services. WHen you have done that, you are able to add the document services taskflows to your pages. Just go to a page in your pagegroup and edit it. Open the resource catalog and you will find some extra taskflows you can add.
    If you haven't configured UCM and webcenter to work together, here some steps that will help you:
    * Integrating UCM with Spaces
         * They both need to use the same LDAP store.
         * Since there is no LDAP server available, we choose for embedded WLS LDAP.
         * Integrating the ucm into apache
              * Stop UCM
              * In /oracle/product/wls10320/WebCenter/ucm/config/config.cfg, check the SocketHostAddressSecurityFilter to contain 127.0.0.1
              * Add the SocketHostAddressSecurityFilter to /oracle/product/wls10320/WebCenter/ucm/admin/bin/intradoc.cfg
              * Add to /oracle/product/wls10320/WebTier/instances/instance1/config/OHS/ohs1/httpd.conf
                   include /oracle/product/wls10320/WebCenter/ucm/data/users/apache22/apache.conf
              * Change the mod_wl_ohs.conf file to
                   <IfModule weblogic_module>
                         WebLogicHost localhost
                         WebLogicPort 7001
                         Debug ON
                         WLLogFile /tmp/weblogic.log
                   </IfModule>
                   <Location /webcenter>
                      SetHandler weblogic-handler
                      WebLogicCluster localhost:8888
                   </Location>
                   <Location /webcenterhelp>
                      SetHandler weblogic-handler
                      WebLogicCluster localhost:8888
                   </Location>
                   <Location /owc_discussions>
                      SetHandler weblogic-handler
                      WebLogicCluster localhost:8890
                   </Location>
                   <Location /em>
                      SetHandler weblogic-handler
                   </Location>
                   <Location /console>
                      SetHandler weblogic-handler
                   </Location>
                   <Location /consolehelp>
                      SetHandler weblogic-handler
                   </Location>
              * Restart UCM & WebTier
              * Test URL: http://yourServer:7777/idc
         * Configure the Identity Store for UCM & WebCenter
              * Set the password for the embedded ldap in WLS
                   Console => Domain Name => Security tab => Embedded LDAP tab => reset credentials
              * Restart AdminServer
              * Stop UCM
              * Add the following to /oracle/product/wls10320/WebCenter/ucm/config/jps-config.xml
                      <serviceInstance name="idstore.oid" provider="idstore.ldap.provider">
                          <property name="subscriber.name" value="ou=myrealm,dc=webcenter_domain"/>
                          <property name="idstore.type" value="WLS_OVD"/>
                          <property name="security.principal.key" value="ldap.credential"/>
                          <property name="security.principal.alias" value="JPS"/>
                              <property name="ldap.url" value="ldap://yourServer:7001"/>
                          <extendedProperty>
                              <name>user.search.bases</name>
                              <values><value>ou=people,ou=myrealm,dc=webcenter_domain</value></values>
                          </extendedProperty>
                          <extendedProperty>
                              <name>group.search.bases</name>
                              <values><value>ou=groups,ou=myrealm,dc=webcenter_domain</value></values>
                          </extendedProperty>
                          <property name="username.attr" value="uid"/>
                          <property name="user.login.attr" value="uid"/>
                          <property name="groupname.attr" value="cn"/>
                      </serviceInstance>
              * In the same file, change the serviceInstanceRef ref="idstore.ldap" to "idstore.oid"
              * Go to /oracle/product/wls10320/WebCenter/ucm/custom/FustionLibraries/tools
              * ./run_credtool.sh
                   Alias: default
                   Key: default
                   User Name: cn=Admin
                   Password: weblogic123
                   JPS Config: default
              * Start UCM
              * Check Provider:
                   * Go to http://yourServer:7777/idc
                   * Login : sysadmin/idc
                   * Administration -> Providers
                   * jpsuser should be good
                   * When a ldapuser exist, disable it!!
         * Configuring UCM for content search
              * Change the file /products/WebCenter11gR1/WebCenter/ucm/config/config.cfg
                  SearchIndexerEngineName=DATABASE.METADATA to SearchIndexerEngineName=DATABASE.FULLTEXT
              * Restart UCM server
              * Run the /products/WebCenter11gR1/WebCenter/ucm/database/oracle/admin/batchsnippet.sql in the wcbepsc_ocserver schema
              * Restart UCM server
              * Open the /products/WebCenter11gR1/WebCenter/ucm/bin/RepositoryManager (sysadmin/idc)
              * Recreate the indexes
         * Registering UCM with WebCenter
              * Go to http://yourServer:7777/em
              * Login with weblogic/weblogicPassword
              * Go to WebCenter - WebCenter Spaces - webcenter (WLS_Spaces)
              * From the top menu, select Settings - Service Configuration     
              * Select Content Repository
              * Add
                   Connection Name: ucm_connection
                   Repository Type: Oracle Content Server
                   Active Connection: checked
                   Administrator User Name: sysadmin
                   Root Folder: /WebCenterSpaces
                   Application Name: Spaces
                   CIS Socket Type: Socket
                   Server Host: localhost
                   Server Port: 4444
                   Authentication Method: Identity Propagation
              * Restart WLS_Spaces
         * Test the connection by creating a new group space and upload a document to the document page of this group spaceHope this helps.

  • Read and write data from virtual port (bluetooth adaptor)

    Hi,
    I want to read and wirte data to the bluetooth adaptor by java. I connected my bluetooth adapter to COM3.(virtual port). Anybody help me with this.I need very urgent.
    Thanks,
    with regards,
    thelay

    Deepa_05 wrote:
    Hi,
    I didn't get jar fileAnd?

  • How to read and write data from Excel to TestStand without using LabVIEW VIs

    Hi,
    How can I read in columns of data from Excel into a TestStand array and write columns of data to Excel from TestStand without using LabVIEW VIs?
    I don't think the Property Loader custom step type in TestStand will work because the data I would like to read in from Excel is in a column that is thousands of rows long and the data has to be in the proper format to use the Property Loader to load in an array from Excel.
    Thanks for your help.

    That example does not use LabVIEW and it does about 40% of what you need to do by calling Excel through ActiveX. If you don't know how to use Excel through ActiveX then you'll need to brush up on that.
    http://www.microsoft.com/en-us/download/details.aspx?id=16250
    http://support.microsoft.com/kb/141759
    http://support.microsoft.com/kb/302084
    CTA, CLA, MTFBWY

  • How to read and write data from json file from windows phone7 app

    Hi
    I am developing wp7 app for the use of students my questions are
    How can i write a code to read and write the json/text file for the wp7.
    I am using windows 7 OS, VS 2010 Edition.
    This is my code below:
    xaml:
    <Grid>
                        <TextBlock Height="45" HorizontalAlignment="Left" Margin="7,18,0,550" Name="textBlock1" Text="Full
    Name: " />
                        <TextBox Width="350" Height="70" HorizontalAlignment="Left" Margin="108,1,0,0" Name="txtName"
    Text="Enter your full name" VerticalAlignment="Top" />
                        <TextBlock Height="45" HorizontalAlignment="Left" Margin="6,75,0,0" Name="textBlock2" Text="Contact
    No: " VerticalAlignment="Top" />
                        <TextBox Width="350" Height="70" HorizontalAlignment="Left" Margin="108,61,0,480" Name="txtContact"
    Text="Enter your contact number" MaxLength="10" />
                        <Button Content="Register" Height="72" HorizontalAlignment="Left" Margin="10,330,0,0" Name="btnRegister"
    VerticalAlignment="Top" Width="190" Click="btnRegister_Click" />
                    </Grid>
    xaml.cs:
    private void btnRegister_Click(object sender, RoutedEventArgs e)
                string name, contact;
                name = txtName.Text;
                contact = txtContact.Text;
                try
                    if (name != "" && contact != "")
                        string msg = name + " " + contact;
                        MessageBox.Show(msg);
                        Student stud = new Student
                            Name= name,
                            Contact = contact,
                        string jsonString = JsonConvert.SerializeObject(stud);
                        MessageBox.Show(jsonString);
                    else
                        MessageBox.Show("Input Proper Information", MessageBoxButton.OK);
                catch (Exception ex)
                    MessageBox.Show(ex.Message);
    I have download NewtonSoft.json version 5.0.8.
    So, I am able to convert input data into json format, but how can I able to write and read this data from a json/text file.
    How can I do?
    Thank you in adv and please, reply soon.

    We don't have many samples left for Windows Phone 7 + Azure, the closest one to what you want to do is probably:
    Using Local Storage with OData on Windows Phone To Reduce Network Bandwidth
    this sample uses the local database feature: 'LINQ to SQL', available to Windows Phone 7.1 and 8.0 Silverlight applications, instead of simple file storage but even if you choose to stick with simple file storage I believe you should be able to adapt the
    networking related portions of the sample to your particular application.
    Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
    your votes for existing suggestions.

  • Read and Write data in iphone app

    I want to build a simple offline mobile app which reads and writes or stores info to a file, xml, json, txt or whatever.
    What is the best way to do this?
    I am currently learing jQuery and PHP, so I don't want to have to learn some other million things that does one thing but not another.
    Can this be achived without objective C? Can i do this with Jquery and phone Gap?
    Thanks

    Do a search for 'HTML 5 Storage' and you'll find a bunch of resources that will help. Here's a few
    http://www.w3schools.com/HTML/html5_webstorage.asp
    http://diveintohtml5.info/storage.html
    http://htmlpad.wordpress.com/2010/03/10/html-5-data-storage-javascript-api-on-ipad-and-iph one/

  • How can read and process data uploded from a datalogger on a network with labview

    hello evryone.
    i have a agilent datalogger 34972a data acquire temperature reading and makes them availlable on a network. i would like to acess this data on a pc running labview, analyse and prsent them. my problem is that i am not quite sure how to tell labview acquire this specific data.
    any help would really help me getting started.
    thanks already.
    Yann

    Are you
    Running the Agilent stand alone (or using Benchlink) and writing data to a file on the network ?
    Do you want to use LabView to control the networked data logger and aquire data? 
    If you are doing #1 then you can not use LabView because the Agilent (and Benchlink) strores data in a proparitary format.
    You have to use Benchlink to export the data to a CSV file before any other program besides Benchlink can read it.
    If you want to do #2 then you simply access the Agilent through VISA just like if it were connected using USB, Serial, or GPIB. 

  • Read and Get Data from PDF

    Hi All,
    I am fairly new to programming macros in Excel VBA, and right now I need to write a macro that can open a PDF file and read it and get data from there and paste it into an excel spread sheet. Is this possible?  If so can you give me some sample code
    that would do that?

    I did this once many years ago.  I had to have Acrobat Professional installed ($$$).  There are free pdf parsers that you access from VBA using Win32 commands like:
    https://code.google.com/p/peepdf/
    Maybe something has changed since I did it

  • How to reduce reading and recording data time/ Visual C++, PCI 6024E and PCI-MIO-16E?

    Right now I am working on a data communication programme. The time of reading digital signal and recording data is more than I expected, which is about 100 microsecond. I need to reduce the time. The software I am using is Visual C++ 6.0. I use two DAQ boards, which are PCI-6024E and PCI-MIO-16E. I have set the priority of Visual C++ to be realtime by task manager. The operating systme is Windows XP.
    I am wondering how to set the interrupt of reading or writing data to be the highest and stop any other kind of interrupt.
    Thanks in advance!

    The primary limitation you will encounter when trying to do high speed
    digital I/O using your E-Series hardware is that the digital lines are
    all software timed.  This means that for each and every digital
    read it is necessary for your software to issue a command to your
    hardware, read a single point, then receive the response from the
    board.  This prevents you from performing digital operations at
    very high speed.  In general, I would say that 100 microseconds is
    a very good response using software-timed digital I/O on a Windows
    computer.
    It is difficult to make a good recommendation without more detail about
    what you are trying to do.  You may need to consider switching to
    a Real-Time operating system, or upgrading your DAQ hardware to a board
    that will allow you to time your digital acquisitions on the board
    itself.  These devices, such as the m-Series DAQ or the PCI-653x
    series, would allow you to use hardware triggers for your digital
    acquisitions, change detection, and buffered data acquisitions to
    reduce the software overhead involved in a rapid acquisition.

  • I Lost Power to my PC while in Acrobat Reader and lost data, where is temp file located?

    I lost power to my pc while typing a new acrobat reader file but never saved it, where is the default temp file located, if this exists? Thanks.

    The answer to your question depends upon your version of Reader and your OS. Especially since the last version of Acrobat Reader was version 5 which is four majors versions ago. The last four versions have been called Adobe Reader, not Acrobat Reader. This the forum for the Acrobat commericial product, not the free reader product.  
    PDF files cannot be edited in Reader and fields filled in with Reader cannot be saved (unless especially enabled) canot be re-opened from the temp files. To make a long story short. You will need to re-type the information. 
    Sorry to be the bearer of the sad news.

  • How can I read and display data with OR without recording at the same time?

    Hi all,
      This forum has been of much help to me, but I have a rather specific question I can't seem to find an answer to.  I am new to LabView, educating myself with tutorials, trial and error, and this forum. 
      Attached is what I have so far.  I would like to read data (three voltages) and write it to an excel file.  As written below, it will do nothing until I click the "Record" button, when it then takes data, displays it on the gauges and waveform chart, and writes it to a file.  What I would like it to do is display the data at all times, and record when I click the record button (while still displaying data being read).  I have tried to do this by moving the DAQ Assistant VI, gauges, and waveform graph outside of the loops, but when I do this, it will read until I press record, and then it simply records whatever value it's stuck on.  Sorry for the long post, thanks for any help. 
      --Nathan
    Attachments:
    Record and Write to File 2.vi ‏332 KB

    Sorry, I don't have any DAQ installed, so I won't comment on the DAQ parts.
    First of all, Your VI will do nothing until you (1) first set the record button to ON  and (2) press the start button in the tool bar. It almost seems that you are using the "continuous run" button. (Don't! That's not its purpose. Basically, it automatically restarts the program whenever it finishes). A toplevel VI should never stop during normal operation, so place a big while loop around all code and create a wait state that does nothing until you tell it to acquire.
    You don't need the inner while loop, simply place your code inside the big while loop (and accumulate your array data in an initialized shift register if really needed. Currently you do at the inner loop boundary for some reason). You have a big problem that the array can grow without bounds unless you clear the accumulated data once in a while or place it in a FIFO buffer of limited size. If you let ot grow forever like you do now, the program might run out of resources at one point in the future.
    Since you are appending to your file, maybe yo don't need any shift register, just use the data points of the current iteration. Place your save operations in a case structure and keep appending the new data to your file only if the case is true.
    It is also very inefficient to use highlevel file IO here,because each instance opens and closes the file. I recommend to open the file once outside the loop, then use low level IO to append, and close the file once the big loop is done.
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for

  • Chart are not supported in crystal report - on top of SAP R/3

    Hi All, I have made one crystal report on top of SAP R/3 system. I have included some graphs on it. But when i uploaded that report on infoview portal, it shows blank page when i try to view it on portal. It works fine in Crystal Report 2008. I have

  • Adobe Acrobat Distiller XI pdf-help file

    Hello, Thank you for answer to the Acrobat XI Pro pdf help file. I forgot to ask, if a similar file for Adobe Acrobat Distiller XI is available. Regards

  • Can 32 bit OBIEE 11.1.1.5 be installed on a 64 bit windows machine?

    We're having LOTS of problems getting the install of 64 bit 11.1.1.5 to work. Just as a curiosity - is it possible to install 32 bit OBIEE 11.1.1.5 on a 64 bit Windows 2008 server? Thx, Scott

  • Allocation of segment based on partnersegment

    Hi Experts, I am facing the challenge to distribute reported data to different segments according to the distribution of partner segments in one particular item. I tried allocation but so far it seems it can only allocate segment values when the dist

  • Album artwork not showing after download

    I loaded CDs onto my ipad using my home computer. On the Ipad, the album artwork aren't there. The only one that shows up is an album I purchased from amazon.com. What am I doing wrong?