Reading files from ZIP in memory
Hi,
I need to extract some files from a ZIP archive which will be in memory, accessed with an InputStream (ByteArray).
As ZIP files are likely to be large, I'd like to have some sort of "random access" in the way java.util.ZipFile does, allowing me to access any file directly without having to iterate through all the entries. Unfortunately, ZipFiles can only be constructed from physical Files, but mines will always be in memory, and I can't dump them to disk.
So I think ZipInputStream is the only way to go here, but it imposes me a sequential access to the entries. Maybe I could fully read the file for the first time and save zip entries' offsets in a hash table, but I find it difficult to later seek the ZipInputStream to extract the entries with its offsets and it seems going back (or resetting) is not possible in this kind of streams.
Any idea? Thanks in advance.
user2286010 wrote:
Thanks for your quick reply, Joachim. I've got some questions about your solution,
+1. (optionally) iterate over all ZipEntries (using a ZipInputStream) and remember whatever information you need (names, size, ...)+
I was thinking in how I could remember this information. I've got the name, but what about the offset? Is there any way I can know which byte the ZipInputStream is pointing to?You wouldn't remember any offsets (except maybe the number of the ZipEntry you need, if you want to avoid comparing names of each entry).
The position in the stream seems to be an implementation detail that the ZipInputStream doesn't provide, so I didn't try getting that.
+2. When a request for a specific entry comes in, create a new ZipInputStream, skip entries as necessary and read the entry+
Even if I had the offset, I also don't know how to skip the previous entries.Sure: ZipInputStream.getNextEntry();
Maybe looping until reaching the n-th entry, supposed to be the requested one, and not thinking in terms of bytes?That's what I was suggesting. Either remember the n during step 1 or (even simpler) call getNextEntry() until you get the entry with the desired name.
It may be not too slow"may be" means: test it.
, but better if it were possible to just go to the exact location ;-)Why? How much better? Have you tested it? Is it a proven performance bottleneck? I think you're over-thinking the situation. Implement what goes easy then test if the performance is a problem. I guess it will not be a problem, but since I haven't implemented this and don't know your performance requirements, I can't really tell.
Similar Messages
-
Reading files from phone memory
Hi All,
I am developing a Universal application using vs 2013 in windows phone 8.1. I am stuck in finding and reading file from phone memory.
I have used the Localfolder syntax
StorageFolder folder = Windows.Storage.ApplicationData.Current.LocalFolder;but it didn't worked. Its Showing the application data. But i want to read the file exixts in my phone memory.Then i have usedStorageFolder file = KnownFolders.DocumentsLibrary;but as i read from the forums its not suggested way to approach. Please suggest me the way to find the file from phone memory and to read it.Any help would be appreciatable!!Hi sarika,
That is expected, see the documentation for more information:
App capability declarations at Documents section, you need declared at least a file type association.
Furthermore You can't use the Documents library in a Windows Phone Store app.
You can't publish a Windows Phone Store app that specifies the documentsLibrary capability to the Windows Phone Store. The Store blocks the publishing of the app.
Your app can't access the Documents library in the phone's internal storage. If another app creates a Documents folder on the optional SD card, however, your app can see that folder.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Reading files from Sony DVD810
The Sony DVD810 is a hybrid that records on DVDs, memory sticks and internal memory. I'm trying to download a file from the internal memory, and when I do, I get a file folder with three files inside: AVIN0001.BNP, AVIN0001.INP & AVINOOO1.INT. I don't know what to do with these files, and Sony tech support hasn't been any help so far. Can anybody help me with this? I'd like to get this video into a form where I can edit it. Thanks for any assistance you can provide. John Harrison - [email protected]
Sorry, but your camera is incompatible with iMovie 6, which only accepts DV streams from tape via firewire.
If it records on DVD it records in the mpeg2 format, which is the standard final delivery format of a DVD and not intended for further editing.
You can import the mpeg2 file to your desktop, then:
You need to convert the VOB files back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal. -
the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
any suggestions?Check out pogo plug device, it allows you to upload camera roll via wifi.
-
HOW TO DELETE ADOBE READER FILE FROM ADOBE READER
HOW TO DELETE ADOBE READER FILE FROM ADOBE READER@ !@
Your question make no sense. What exactly are you trying to do?
-
Reading Files from an FTP location based on Timestamp
Hi,
I have a requirement of reading files from an FTP location. The files should be read in the order they were saved in the folder. Can someone tell me how to solve this?
Thanks,
RaviHi Arik,
Thanks for your reply. I tried doing what u said, but it isn't working. My requirement is to List the files in the folder using FTP adapter and get the file name with the least file stamp from the FTP adapter and pass the FileName dynamically to another FTP adapter which reads the file based on the FileName. When i tested after including the property (for listing the files) you mentioned, it is giving the following error (copied from flow trace):
<messages>
<input>
<Invoke_getFileListFTP_FileListing_InputVariable>
<part name="Empty" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/ftp/APP_SequentialFileTransfer/PRJ_SequentialFileTransfer/WS_GetFileList_FTP"/>
</part>
</Invoke_getFileListFTP_FileListing_InputVariable>
</input>
<fault>
<bpelFault>
<faultType>0</faultType>
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="summary">
<summary>Exception occured when binding was invoked. Exception occured
during invocation of JCA binding: "JCA Binding execute of
Reference operation 'FileListing' failed due to: Exception
occured when binding was invoked. Exception occured during
invocation of JCA binding: "Could not instantiate
InteractionSpec
oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec due
to: Cannot set JCA WSDL Property. Error while setting JCA
WSDL Property. Property setListSorter is not defined for
oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec Please
verify the spelling of the property. ". The invoked JCA
adapter raised a resource exception. Please examine the above
error message carefully to determine a resolution. ". The
invoked JCA adapter raised a resource exception. Please
examine the above error message carefully to determine a
resolution.</summary>
</part>
<part name="detail">
<detail>Cannot set JCA WSDL Property. Error while setting JCA WSDL
Property. Property setListSorter is not defined for
oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec Please
verify the spelling of the property.</detail>
</part>
<part name="code">
<code>null</code>
</part>
</bindingFault>
</bpelFault>
</fault>
<faultType>
<message>0</message>
</faultType>
</messages>
Thanks,
Ravi
Edited by: Ravi Santosh on Apr 24, 2012 11:02 PM -
Reading file from an external folder.
Iam tring to read an external file from the C:\ drive. Given below is the code.
DATA LV_XLS(100) TYPE C.
DATA LV_CONTENT TYPE XSTRING.
LV_XLS = 'C:\XML\Report.xls'
READ DATASET LV_XLS INTO LV_CONTENT.
But when i execute iam getting an error - FILE NOT FOUND. How do i read file from an external folder. My requirement is to strictly read from an external folder. Please help.
If this is not possible please advice as to how the file could be moved to the SAP root directory. Iam not able to locate the root.hi,
This is the code to read a excel file from the local system.
Read data set you are using in your code corresponds to files on application server thats the reason its throwing an error.
* Parameter variable declaration for browsing the file location *
PARAMETERS:
p_file TYPE ibipparms-path OBLIGATORY.
data:
it_text TYPE truxs_t_text_data .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
* DYNPRO_NUMBER = SYST-DYNNR
field_name = ' '
IMPORTING
file_name = p_file.
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
* I_LINE_HEADER =
i_tab_raw_data = it_text
i_filename = p_file
TABLES
i_tab_converted_data = t_cust
EXCEPTIONS
conversion_failed = 1
OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
This is to read a text file from local system.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:\FILEINTERFACE\file.TXT'
* FILETYPE = 'ASC'
has_field_separator = 'X'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
data_tab = t_kna1
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PS. In both of the above mentioned function modules make sure that the file structure is similar to the internal tables used.
Thanks
Sharath -
On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo
I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks -
Hi,
Trying to read files from a dir on my site using a JSP and bean. I've tried nearly every option for the filepath I can think of and it doesn't seem to be finding the file...
Here's the bit:
String URL = "images\\wedding_photos\\";
File dir = new File(URL+aFile_to_add);
String[] files = dir.list();
It's working locally, but I obviously had to change the path from c://... to the above.
The full code is listed below in the addWedding Method
The method removes the .jpg from the file name and then writes the new file name to a database
Thanks for any insight.
Regards
Jim
public String addWedding(String aFile_to_add)
String feedback = "unset in scrubWedding";
try
String URL = "images\\wedding_photos\\";
Class.forName("org.gjt.mm.mysql.Driver");
java.sql.Connection connection = java.sql.DriverManager.getConnection("jdbc:mysql://localhost/rhwedd2_shop?user=**********&password=*******");
java.sql.Statement statement = connection.createStatement();
File dir = new File(URL+aFile_to_add);
String[] files = dir.list();
if (files == null)
feedback = "Sorry, couldn't find the file "+aFile_to_add+"...no files have been added.";
else
for (int i=0; i<files.length; i++)
// Get filename of file or directory
String filename = files;
String no_extension;
//convert string array element into a char array
char [] charsfilename = filename.toCharArray();
int newlength = charsfilename.length -4;
no_extension = String.valueOf(charsfilename,0,newlength);
filesAdded = filesAdded+", "+no_extension;
// Show the new file names in stack trace without extension
//System.out.println("String no_extension " + no_extension );
statement.executeUpdate("INSERT INTO items VALUES ('"+no_extension+"',5,'"+aFile_to_add+"')");
// write to table with item_id and weddingid
feedback = "The following files have been added..."+filesAdded;
if (statement != null )
statement.close();
if ( connection != null )
connection.close();
catch(Exception e)
feedback = "Into the catch";
e.printStackTrace(System.err) ;
return feedback;
}//end addWeddingString URL = "images\\wedding_photos\\";
File dir = new File(URL+aFile_to_add); ok, ok, I'll answer...
1) What gives you the impression that the relative directory "images\\..." exists (or, in other words, what makes you think your current directory is the parent of "images"? -
Open Data Set Error while trying to read file from non SAP server
Hi all,
is it possible to read data from non-SAP application Sever?
I'm using OPEN DATASET p_filin FOR INPUT IN LEGACY TEXT MODE CODE PAGE '1504',
Where p_filin is other Windows server.Our applicition server is under Unix.Is it a problem?
I make test to read file from SAP application server and it was ok.So how to call other server?
Thanks!Hi,
Yes it is possible to read data from a non SAP server through the statement OPEN DATASET.
The important thing to check is that the SAP Server got enough access to the non SAP server so it can perform a reading/writing process depending on your needs.
You should contact your network administrator and BASIS to help you check the permissions. This can be pretty tricky, specially if the servers are in different domains.
Regards,
Gilberto Li -
[Urgent] How to read files from different directories?
I am new to Java Programming, I would like to know how to read files from directories other than the current one? (example as follows)
ProjectDirectory
|--MainDirectory
|--MainProgram.java
|--SupplementDirectory
|--SupplementProgram.java
|--Pictures
|--Image.gif
What should I write in the MainProgram.java so that I can use the supplementProgram.java from MainProgram and read the Image.gif file from the MainProgram.java?
ThanksRun through the I/O tutorial here. It should get you up to speed on this sort of thing...
-
Can the aTV read files from an iTunes library on my nas drive without my computer being on
I have my itunes library on a My Book Live nas drive that contains all of my digital movies and TV shows. I want to be able to watch my movies from the library without a computer running. I understand that Apple has chosen to chain you to the computer and your itunes account through Home Sharing but I can not see why they couldn't allow you to access a nas drive without a computer running because your aTV is tied to your itunes account also so why do they force you to run a computer 24/7 365 in order to access the files you have bought and paid for.
I have a love/hate for Apple because I love the quality of the products they make but I hate how they make all of the digital files you purchase only accessible through a computer running Home Sharing even though the files are not stored on the computer.
I have tried several things to get this to work without a computer but no luck. The only way I have found to be able to do this is to Jailbreak your aTV and install 3rd party software (which I don't want to do) that will allow you to by pass the computer and Home Sharing (which is dumber than ****) because that is all I want to do is eliminate the need of a computer running wasting electricity (I thought Apple was supposed to be an enviro friendly company, guess not). I am not trying to steal or give someone else my purchased movies and using the aTV and an internet connection they could still be able to tie your media to your itunes account so I just don't get there thinking, or lack of thinking I should say.
Is their a way to do this without Jailbreaking or modifying your aTV?
If not is Apple ever going to wake up and allow there customers to actually USE the media they purchase from them without Home Sharing and a computer running?_Skull wrote:
Can the aTV read files from an iTunes library on my nas drive without my computer being on
no it can't. you need itunes open and running -
Hi,
When i try to read file from server,the following message is displayed .
ORA-29532: Java call terminated by uncaught Java exception: java.security.AccessControlException: the Permission (java.io.FilePermission /tmp read) has not been granted to EWMTRACKTEST. The PL/SQL to grant this is dbms_java.grant_permission( 'EWMTRACKTEST', 'SYS:java.io.FilePermission', ' /tmp', 'read' )
ORA-06512: at "EWMTRACKTEST.GET_DIRLIST_EWM", line 1
ORA-06512: at line 1
thanks and regards
P Prakashit seems obvious, user EWMTRACKTEST doesn`t have access to directory /tmp and the file under that.
try to give read permission and try again.
you could use command line like 'chmod' to grant permissions. -
hi all, i've just switched to apple after many years using MS OS! I'm now using iMac desktop 21.5" with 2.9GHz processor and latest Yosemite software.
How do I transfer files from one USB memory stick to another USB memory stick on the iMac? cheers, linley94Plug in the memory stick and it should open then create a New Folder and drag and drop the contents from the memory stick to the new folder you created. Remove the original memory stick all the information should be in the new folder you created. Now plug in the new memory stick with nothing on it when it opens drag the folder with the contents from the original memory stick folder and all into the new memory stick that opened and there you have it.
CHEERS
DON -
Dynamically Reading Files From Application Server
Hi Experts,
Presently I have to write a program which reads files from the application server dynamically. This program will be scheduled in the background with the frequency of half an hour.
I am Using the function module
CALL FUNCTION 'SUBST_GET_FILE_LIST'
EXPORTING
DIRNAME = '/usr/sap/xxx/xxx/'
FILENM = 'DATASET'
PATTERN = '.txt'
TABLES
FILE_LIST = IT_FILELIST
I am facing problem in specifying the parameter FILENM in the function module,
As I have to read many files from the apps server. How to assign the parameter of function module so it can take the many files generated in the apps server.
Thanks in Advance,
Regards,
Irfan HussainHi,
Instead of the above FM, you can use the following code :
AT SELECTION-SCREEN ON VALUE-REQUEST FOR po_ifile.
PERFORM get_current_directory USING 'PO_IFILE' po_ifile
rov-home_dir rov-curr_dir.
PERFORM get_filename-of-server TABLES itab_filename
USING rov-curr_dir rov-gen_name.
PERFORM help_values_get_with_table_ext TABLES itab_filename
USING rov-curr_dir
po_ifile.
*& Form get_current_directory
text
-->P_0023 text
-->P_PO_IFILE text
-->P_ROV_HOME_DIR text
-->P_ROV_CURR_DI text
-->P_CALL text
-->P_FUNCTION text
-->P_0029 text
-->P_IMPORTING text
-->P_FILE_NAME text
-->P_= text
-->P_PO_IFILE text
FORM get_current_directory USING _fieldname
_filename
homedir
currdir.
IF _fieldname <> space.
PERFORM dunp_value_read USING _fieldname _filename.
ENDIF.
IF _filename = space.
currdir = homedir.
ELSE.
rov-work_dir = _filename.
rov-fdpos = STRLEN( rov-work_dir ).
DO.
IF rov-fdpos = 0.
EXIT.
ENDIF.
rov-fdpos = rov-fdpos - 1.
ASSIGN rov-work_dir+rov-fdpos(1) TO <rov_p>.
IF <rov_p> = rov-delchar.
<rov_p> = space.
EXIT.
ELSE.
<rov_p> = space.
ENDIF.
ENDDO.
currdir = rov-work_dir.
ENDIF.
ENDFORM. " get_current_directory
*& Form get_filename-of-server
text
-->P_ITAB_FILENAME text
-->P_ROV_CURR_DIR text
-->P_ROV_GEN_NAME text
FORM get_filename-of-server TABLES nametab STRUCTURE itabfilename
USING _dirname _genname.
CALL 'C_DIR_READ_FINISH' " just to be sure
ID 'ERRNO' FIELD rov-errno
ID 'ERRMSG' FIELD rov-errmsg.
CALL 'C_DIR_READ_START' ID 'DIR' FIELD _dirname
ID 'FILE' FIELD _genname
ID 'ERRNO' FIELD rov-errno
ID 'ERRMSG' FIELD rov-errmsg.
IF sy-subrc <> 0.
EXIT.
ENDIF.
REFRESH _nametab.
DO.
CLEAR _nametab.
CALL 'C_DIR_READ_NEXT' ID 'TYPE' FIELD _nametab-type
ID 'NAME' FIELD _nametab-name
ID 'LEN' FIELD _nametab-len
ID 'OWNER' FIELD _nametab-owner
ID 'MTIME' FIELD _nametab-mtime
ID 'MODE' FIELD _nametab-mode
ID 'ERRNO' FIELD _nametab-errno
ID 'ERRMSG' FIELD _nametab-errmsg.
_nametab-dirname = _dirname.
MOVE sy-subrc TO _nametab-subrc.
CASE sy-subrc.
WHEN 0.
IF _nametab-name+0(1) = '.'.
ELSE.
APPEND _nametab.
ENDIF.
WHEN 1.
EXIT.
WHEN OTHERS. " SY-SUBRC >= 2
EXIT.
ENDCASE.
ENDDO.
CALL 'C_DIR_READ_FINISH' " just to be sure
ID 'ERRNO' FIELD rov-errno
ID 'ERRMSG' FIELD rov-errmsg.
ENDFORM. " get_filename-of-server
*& Form help_values_get_with_table_ext
text
-->P_ITAB_FILENAME text
-->P_ROV_CURR_DIR text
-->P_PO_IFILE text
FORM help_values_get_with_table_ext TABLES _filename
STRUCTURE itab_filename
USING _currdir
_selfile.
TYPES: BEGIN OF f4typ_head_struc,
tabname LIKE help_info-tabname,
fieldname LIKE help_info-fieldname,
head_text LIKE shstruc-keyword,
END OF f4typ_head_struc.
DATA itab_fields LIKE TABLE OF help_value WITH HEADER LINE.
DATA itab_selvals LIKE TABLE OF help_vtab WITH HEADER LINE.
DATA itab_values LIKE TABLE OF rlgrap-filename WITH HEADER LINE.
DATA itab_header TYPE TABLE OF f4typ_head_struc WITH HEADER LINE.
REFRESH itab_fields.
REFRESH itab_selvals.
REFRESH itab_values.
REFRESH itab_header.
itab_fields-tabname = 'PS0192'.
itab_fields-fieldname = 'BAA01'.
itab_fields-selectflag = ' '.
APPEND itab_fields.
itab_fields-tabname = 'RLGRAP'.
itab_fields-fieldname = 'FILENAME'.
itab_fields-selectflag = 'X'.
APPEND itab_fields.
LOOP AT _filename.
itab_values = itab_filename-type.
APPEND itab_values.
itab_values = itab_filename-name.
APPEND itab_values.
ENDLOOP.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE_EXT'
EXPORTING
CUCOL = 0
CUROW = 0
DISPLAY = ' '
FIELDNAME = ' '
TABNAME = ' '
TITLE_IN_VALUES_LIST = ' '
SHOW_ALL_VALUES_AT_FIRST_TIME = ' '
USE_USER_SHRINKING = ' '
titel = _currdir
NO_SCROLL = ' '
NO_CONVERSION = ' '
NO_MARKING_OF_CHECKVALUE = ' '
IMPORTING
index = rov-index
select_value = rov-selvalue
TABLES
fields = itab_fields
select_values = itab_selvals
valuetab = itab_values
HEADING_TABLE =
EXCEPTIONS
field_not_in_ddic = 1
more_then_one_selectfield = 2
no_selectfield = 3
OTHERS = 4.
IF sy-subrc = 0.
CLEAR itab_filename.
READ TABLE itab_filename INDEX rov-index.
IF itab_filename-type+0(3) = 'dir'.
CONCATENATE _currdir rov-delchar rov-selvalue rov-delchar
INTO _selfile.
ELSE.
CONCATENATE _currdir rov-delchar rov-selvalue INTO _selfile.
ENDIF.
ENDIF.
ENDFORM. " help_values_get_with_table_ext
Best regards,
Prashant
Maybe you are looking for
-
How to find a program, which is using "Z" variant
Hi All, I know only on custom devloped variant name, say "ZTEST". I do not know, which program is using it. Entry is there in TVARV table. Please let me know, how can I find the program, which is using that variant. Thanking you, Chetan Shah
-
Upgrading to CS6 Design and Web Premium from CS4 Design Premium Install Failure
I am trying to upgrade to CS6 Design and Web Premium from CS4 Design Premium on Win 7 (32bit). I am nistalling from the DVD which was purchased from the Adobe Store. The box says it is for Upgrading from 4 or 3x. I am entering the CS6 serial numb
-
Ntoskrnl.ExiAcquireFastMutex could not be locat
I installed the X-FI Extreme Music board and drivers and all went fine. I even went online and verified the drivers were up to date (by the Device Manager Update Driver utility) When I installed the software that came with the sound card (the Sound B
-
Hi, I know that 1KEK will transfer the balances from FI to PCA for Accounts receivable and Accounts payable. Our requirement is to transfer only AP balances as we are using substituion of SD so no need to transfer AR balances. Will it be possible to
-
Error: -30 Preparing to remove...
I received an error containing the following text during my installation of iTunes: Feature Transfer Error Error; -30 Preparing to remove... i tried uninstalling everything, repairing everything, with no avail. iTunes has worked on many of my other c