Reading Report COA and Expiration

Hi all, I'm sending messages using COA and Expiration Reports on a temporary queue.
How can I distinguish between the two different reports I get?
I mean , the only differences seems to be the feedback value, 258 for the COA and 259 for the Expiration.
I'm I on the right way?
Thanks in advance
Gabriele

Hi Frank,
Thanks for the response.
Actually I used a jheadstart template for my button and I forgot to remove this line from the velocity template
<f:actionListener type="oracle.jheadstart.controller.jsf.listener.DoRollbackActionListener"/>
which seems to have rolled back any change the user made and the values were thus lost.
Regards,
Ali

Similar Messages

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

Use of READ REPORT and INSERT REPORT

Hi Guys,
i need a small help from u guys.......
i want to know the use of READ REPORT and INSERT REPORT with Example
the requirement is...
i want to declare an internal table with fields from custom table.
if any field is aded in the custum table then that field also should get populated in the program.
Ex: custom table fields are
MANDT
BUKRS
MATNR
LIFNR
field1
field2
field3
now suppose if a new field field4 is added in the Table
then the Program should automatically pick-up the fields from FIELD1...FIELD4.
i heard by using READ and INSERT report we can do it
plz help me ...
Thanks
Sunil.:-)

If you're on 46C or above, you can use the following to generate tables dynamically.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = GT_FIELDCAT
IMPORTING
EP_TABLE = GS_DATA_HEAD
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
But you are restricted to 32 calls, if I remember correctly. If you are in a later release, you can use the RTTS classes to create internal tables dynamically, without the restriction on subroutine pools.
These classes are CL_ABAP_TYPEDESCR and subclasses.
There are a few blogs on SDN that give examples of their use.
Matt

About report groups and read programs for the object EC_PCA_SUM

Hi Friends,
Hope every one is doing well..!
I've an issue with the report groups and read programs for the object EC_PCA_SUM. As we know that the report groups and read programs available for this object in the application customizing are used to analys the archived data.
That is these programs comes into picture after the archiving operation.
For more information, you can visit the below web site:
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/e4/69f353b75a11d1b5850000e82debc6/frameset.htm]
Now, my question is how would I check the code for these analysing programs available for this object. I can't see this in SE38.
Thanks to reply for this..
Full marks will be awarded.
Regards,
Shamim

Hi Lakshman,
Thanks for the reply.
Hi Deiter,
You're right.
Your provided transaction "GR55" helped me to find out the program name for a particular group. However, these are just Write and Painter reports.
But can you please let me know the functionality of these report groups ?? what are these used for ???
Do we have these programs for other archiving objects like CO_ITEM,CO_ML_BEL,MM_MATBEL,CO_ORDER,
PP_PLAN,PP_BKFLUSH ??
More points will be awarded.
Thanks a lot.
Regards,
Shamim
Edited by: S H A M I M on Sep 19, 2008 3:19 PM

How i can make forms read form nls and reports read from anather

hi evrey one
how i can make forms read form nls_lang and reports read from anather nls_lang ,
I think that this property is found in the file format .ini,
I forgot his name,
Is there one has found this information,
pleez share.
thanks.

At a minimum, the creation of the TcpClient will need to change its parameter to the name of server you want to use:
TcpClient tClient = new TcpClient("gmail-smtp-in.l.google.com", 25);

How do you request a received and read report from a text message to a non-iphone

how do i request a received and read report on text messages sent to a non iphone like i did with my droid?

You cant with the native iphone app.

Just found a gift card from 2008 and when I tried to redeem it it said the code wasnt valid. I read the back and it says nothing about expiring. How do I redeem it?

It's for $50 so I really want to redeem it! And I've read the back and it says nothing about expiring but is that what happened because its so old?

Contact iTunes
Apple - Support -form iTunes Store - Contact Us

On Hand QTY help with adding Lot and Expiration Date

I need assistance with including the Lot Number and Expiration Date to the query below, can someone please help me with this.
select mp.organization_code org_code
, msi.segment1 item_code
,msi.description
,SUM (mmt.transaction_quantity) quantity
,mmt.subinventory_code
,msi.primary_uom_code UOM
from mtl_system_items_b msi
, mtl_material_transactions mmt
, mtl_parameters mp
where msi.inventory_item_id = mmt.inventory_item_id
and msi.organization_id = mmt.organization_id
and mp.organization_id = mmt.organization_id
and mp.organization_id = msi.organization_id
and msi.organization_id = XX
and mmt.subinventory_code = 'XXXX'
group by msi.segment1
,msi.description
,mmt.subinventory_code
,msi.primary_uom_code
,mp.organization_code
having SUM (mmt.transaction_quantity) >= 0
order by 2;

GKaiseril,
Yes,
I'm aware of JS API Reference disclaimer on page 277. I am executing it from folder level script. The script hasn't changed in 2 years and worked fine in Adobe versions 7.0 through 9.3.2. It stopped working when Adobe released version 9.3.3.
I can make the script do nothing but
this.closeDoc(true);
so that there is no reference to the document after it closes. I still get a fatal error:
Expected a dict Object
Followed by Microsoft Error report
Followed by:
Runtime error!
Program: C:\Program Files\Adobe\Reader9.0\Reader\Acrord32.exe
R6025
-pure virtual function call
Then Reader closes.
All our users have rolled back to Reader 9.3.2 and the problem went away.
I don't believe it is related to the location of the method ...rather something Adobe changed between version 9.3.2 and 9.3.3.
Cheers!
Doug

MSI Afterburner - why does my beta copy reports it's expiring?

Afterburner V2.2 beta - why does my beta copy reports it's expiring?
Do we have another software alternative other than AFterburner for the GTX 560 Ti Hawk?

This is not entirely correct. Only if you reset the system date you extend the expiration date, otherwise you'll get an error message like this.
and the program does not start.
Every beta has a limited time period to work.The expiration date of the 2.2beta8 is 27/11/2011.
But until then it'll be a new version released. So stay cool, or use the non-expiring version 2.1, or go back to the future with your system time.

What is difference between report programming and dialog programming?

hi,
what is difference between report programming and dialog programming? plz provide some example code
bye

ABAP programming
Basically reports are used to read database and represent the results in lists.
Reports are collections of processing blocks that the system calls depending on events.
We can use reports to evaluate data from database tables.
Reports are stand alone programs and controlled by events.
A report itself never creates events
steps in report:
Processing the selection screen
Reading the database
Evaluating the data and creating lists
Outputting a list.
1st u write simple logics, after that u can enhance the code as step by step.
http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
http://www.sapdev.co.uk/reporting/reportinghome.htm
Dialog Programming
Structure of a Dialog Program
A dialog program consists of the following basic components:
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Check this link for basics.
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Check this link for Dialog Programming/Table Control
http://www.planetsap.com/Tips_and_Tricks.htm#dialog
Check this SAP Help for Dialog Program doc.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this SAP Help link for Subscreens.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Check this link for subscreen demo program.
http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
Also check this link too.
http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
http://abapprogramming.blogspot.com/

Crystal Reports 9 and SQL Server 2005 default parameter values

We're using Crystal Reports 9 and upgraded from SQL Server 2000 to SQL Server 2005.
I'm noticing a very weird problem which I wonder if anyone else has experienced (and hopefully found a resolution for). It appears that in using Crystal with SQL Server 2005 stored procedures, if we have default parameter values in the stored procedures, the default parameter values get completely ignored if you pass in a NULL value from Crystal!
For example, if you have a stored procedure that begins like this:
ALTER Procedure [dbo].[StoredProcedure]
@Param1 VarChar(200) = '',
@Param2 VarChar(200) = ''
AS ...
both @Param1 and @Param2 have a default value of an empty string, and therefore should become empty strings if nothing (NULL values) gets passed in for them.
But, like I said, what I'm finding is that with Crystal calling the stored procedure with NULL @Param1 and @Param2 values, they never become empty strings, but rather remain as NULLs.
This was never a problem with SQL 2000.
Very perplexing. Anyone else every experience this?
Thank you.

Please ignore my earlier post -- answered my own question.
NULL parameter values do not get replaced by default values in SQL -- that is normal behavior in both SQL 2000 and SQL 2005. Just goes to show, that no many how many years programming experience you have, you can still get tripped up sometimes : (

Report, Form, and Data Component portlets go to error page

I am able to add Report Form and Data Component portlets to my page, but when I click on the define button it takes me to my error page.
Have I missed configuring something?

hello friends,
thanks for replly,
i m using command noe after table node in main window, but i want display the data below the main window , it is diplaying new page as required but only missing data below the main window.
to be more clear i want to print all the window in first page then only go for next page , so is there any condition or parmeter in main window to go next page only agfter completion of first page.
dont worry abt points.

Creating a print button to call a Report Query and pass filters

If i use the REPORT QUERY option in APEX 4 to create an statement that is the same one used in an interactive report, can I create a link or button to the REPORT QUERY and pass all the session and filter information from the interactive report to the report query?
This way I can have the interactive report screen where the user can do all sorts of modifications and such and then pass those to the REPORT QUERY so I can call that from a custom link or button.
You may ask "why does he need another print button?"
Answer: I am using a view that has some embedded HTML tags to format the output really nicely. The HTML download version created by the interactive reports works beautifully. The customer also wants a PDF version (meh) which does not render the HTML tags and actually echos them as part of the text. I found that I can create another view that uses the CHR function to create all the breaks and such I was doing with HTML and these do render properly in PDF. So, I figured just have 2 reports: 1 Interactive and 1 using a REPORT QUERY. I just want to call the REPORT QUERY version but use the Interactive Search form to set all the parameters.
Or, am I over thinking this and there is an easier method?
I made a previous post where I showed how I got the APEX printing to work and i hoped that helped someone out - fixing this issue would put the whole thing to rest.
Thanks

Is BI Publisher desktop (MS Word add-in) a possibility? This would allow you to use MS Word to create your output template (RTF) that would result in a properly formatted PDF. Of course, you'd have to right an updated version of the query without HTML embedded. Just thinking outside of the box.

Report 6i and Report 10g together in a system

Hi,
Is it create any problem if I installed both Report 6i and Report 10g in
a system having 10g database.
What are possible problem that will have to face?

Hi,
There won't be any issues. We are using both in our development machines. You must make sure the tnsnames.ora has correct entries.
Regards,
Manu.

READ REPORT for specific version

I'm using function module RPY_PROGRAM_READ that calls READ REPORT.
However I'd like to get the code for a previous version. The READ REPORT is very limited with it's options and I can't find a function module (RFC enabled) that does this. Any suggestions?
Thank you and best regards!

Check the Standard Program RSVRSRS1
OBJNAME = <Program Name>
OBJTYPE = REPS
VERSNO = <Version Number>
Kanagaraja L

Reading Report COA and Expiration

Similar Messages

Maybe you are looking for