Reading Task Lists of type N and Q (PLNTY)

Hi Folks,
do you know a FM/BAPI for reading (not displaying) Tasklists and returning tables PLKO, PLPO, PLMK as result.
Thanks! Nikolay

Moderator message - Cross post locked
Rob

Similar Messages

  • What's the difference between task list release for order and release for c

    What's the difference between task list release for order and release for cost?

    Pallavi,
    The status of the task list determines in which other application areas the respective task list may be used.
    Release for costing: means that the task list can be used to calculate costs in Transaction IA16 i.e. the costs for the task list operations would be calculated if released for costing status is set.
    Release for use in the order: Released for Order means that you can use the task list in an order i.e. you could include operations from a task list in an order.
    Regards,
    Usman

  • Mass Change of Task list of type 2 with CEWB

    Dear All,
    How to do Mass Change of Master Recipe with Trasaction CEWB, it is only allowing to do mass change in routing not in master recipe.
    Thanks
    Lisa

    Hi lisa
    As far as i know it is not possible to use CEWB for Master Recipe
    coz there is no option for master recipe selection in working area of CEWB.
    regards
    Sachin

  • Material specification and Inspection plan - Task list usage

    Dear Friends,
    In inspection type  Task list usage is assigned
    For Example
    inspection type 01  -  usage - 03
    inspection type 05  -  usage - 05
    inspection type 06  -  usage - 07
    inspection type 10  -  usage - 06
    In my scenario i want to use all the above inspection type for a product
    if i use mateial specification there is no any problem with my  Task list usage
    If suppose i use inspection plan do i need to create different inspection plan with different usage
    or is it possible to create one inspection plan with all the above usage
    what about universal usage 03  can i use it
    i try to use but system does not triggering inspection lot
    can any one Suggest some ideas
    Many Thanks & Regards
    Raj

    Hi Raju,
    All of first pls understand the concept of Task list and specification.
    If you need to inspection any material in very systematic manner, where you will have well segregated operations where the appropriate Work Centers will be bind and under that hierarchy MIC will be attached. The inspection will be governed by some inspection points. And according the the same Samples will be calculated. When you wanna go with all these functionality then you must have to use Task list (Inspection plan).
    And if you don't wish to have these functions then simply go with the material specification.
    Now it comes the actual query about task list usage.
    If there is a common inspection plan is supposed to be used for all the inspection types for your material then you can prepare only one inspection plan, put ant of the Usage to it it can be 05 or 03 universal. But what you have to do is,
    Go to SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Types Execute and set the Task list usage as the same it is set in the inspection plan for all those Inspection types for which that common inspection plan is supposed to be used.
    Note:- There is no any link between inspection lot creation and task list usage of inspection plan.
    Regards,
    Shyamal

  • Plant Maintenance - Linkage between Task List and Maintenance Plan

    Sir,
    In Plant Maintenance, I have an equipment for which there are 9 maintenance activities that have to be performed every year. Out of these 4 activities will be carried out every month. 1 activity will be carried out during the months of February, June and October. 5 activities will be carried out only in the month of December.
    I need to create Task List for all these activities and subsequently create Maintenance Plans for all these Task Lists.
    Can I group all the 4 activites which will be carried out every month into one single Task List, with separate operation nos and time against each activity?. I don't know whether it is correct or not.
    If I use the above method I can create 3 Task Lists for this particular equipment with same Group no and 3 Group Counters.
    How to create Maintenance Plan for the above scenario?.
    Eventhough, 4 activites are carried out every month and they have been grouped into a single Task List (Group counter 1) and if these activites are carried out on different dates within a month how can I create Maintenance Plan and subsequently create a Maintenance Order?.
    I need some help in this regard. A detailed reply will be helpful.
    Can anyone throw some light in this regard.
    Regards,
    R. Vijayakumar

    you need to create one task list with a maintenance strategy with packages and hierarchy to outline the work requirements i.e. some tasks to be carried out 3 monthly some 4 monthly etc, and also if common tasks appear in 3 monthly package vs 4 monthly package then to suppress the duplicating task
    you would then define a strategy based maintenance plan and run it to get the respective maintenance orders

  • Error while uploading the general maintenance task list with LSMW

    Hi friends,
    I am uploading the general maintenance task list with the help of Standard Batch/Direct input method in LSMW. I am using the internal number range for task list.
    First task list is getting created properly, but while creating second task list, system is giving the error as "external number range is not assigned for task list and task list with this group ID is already created in the system."
    This is because, on initial screen, system automatically takes the group ID of the task list that is created earlier.
    My question is
    1. How to get rid of the group number that is automatically gets populated in group field of initial screen, while creating the next task list?
    2. Is it possible to assign a common identifier in all structure (Header, Operation etc) for single task list, so that system can differentiate between two task lists?
    In Equipment task list, we can differentiate the task list with equipment id and group counter.
    Please note the following point before replying to my question.
    1. I don't want to upload the general maintenance task list with external number assignment.
    Thanks in advance for early reply.

    I have the same problem....
    Please can somebody help me?

  • [QM] How to create an inspection lot with task list assigned?

    Hello, everyone.
    I know, the similar questions have been asked plenty of times, but I am still unable to find a suitable receipe of the inspection lot creation. My goal is to create an inspection lot programmatically and be able to record its results using, e.g., BAPI_INSPOPER_RECORDRESULTS.
    Creating a lot does not appear to be a big problem. I just call the following FMs:
    QPL1_INITIALIZE
    QPL1_INSPECTION_LOT_CREATE
    QPL1_UPDATE_MEMORY
    QPL1_INSPECTION_LOTS_POSTING
    BAPI_TRANSACTION_COMMIT
    As a result, I have a new shiny inspectin lot, but it comes with statuses "CRTD" and "CHCR". I do specify PLNAL and PLNNR fields values for the QALS structure which is passed to QPL1_INSPECTION_LOT_CREATE, but that does not seem to have any effect. When I call BAPI_INSPOPER_RECORDRESULTS later (result values and inspection points come from another lot which is used as a template), it reports of beging unable to find characteristics for the inspection operations (error E026).
    Does anyone know which of the QPL1_INSPECTION_LOT_CREATE parameters affect task list assignment besides PLNAL and PLNR? Or maybe there is a special FM which associates a task list with an inspection lot?
    Thank you in advance.

    Hi Samuel,
    You can get create an Agent as a Task by using the following steps:
    1. Go to Customizing --> EHS --> Industrial Hygiene & safety --> Risk Assessment --> Specify Agent Types
    2. Click on "TASK' Agent type and click on Details icon (CtrlShiftF2)
    3. In the "Only EHS-IHS" drop down, Select "No"
    4. Save the entry
    5. Now try creating an Agent [CBIH92] and you can create an Agent as a Task.
    Hope it Helps,
    Raghu

  • Tasks List not sending email to AD Groups

    Hello,
    I have several Tasks list on my farm and all behave the same way.
    If I assign a task to an individual person, he will receive email notification.
    However, if I assign it to an Active Directory group, no email notification is sent. The AD group does have an email address associated. Using outlook it can receive email.
    The email notifications for the task list is enabled. If I check the SharePoint logs, I don't see that SharePoint is trying to send mail to the group's email. If I assign the task to a single person, he receives the mail and I can see in the logs that the
    email has been sent.
    I have no idea where to continue the troubleshooting.

    Try the following:
    Verify that the group is an AD security group (not a distribution list) and double check that the AD group is email-enabled.
    Check that the group had been explicitly added to a SharePoint group (such as the default Viewers group) with at least read permission to the site and to the list on which the alert was created.
    Verify that the SharePoint group’s membership is set to “Visible to everyone.” (People and Groups>SharePointGroupInQuestion > Settings>Group Settings)
    Would also be worth checking on the Exchange server to see if there any 'Message Delivery Restrictions' for the AD group:
    Exchange Management Console -> Recipient Configuration
    Right-click on the problem group and choose properties.
    On the Mail Flow Settings tab, double click on Message Delivery Restrictions.
    Uncheck the check box “Require that all senders are authenticated”

  • Task List for RCA

    Hi Experts: I stuck into some issues while installation of the SolMan and configuring the RCA.
    I like to start fresh with the installation- We are installing SolMan EHP SP 20 and Oracle- I am using the instalaltion guide in the service market place. But I am looking for step by step task list in sequence. And any lesson learnt while implementing will be help.
    Can you pls provide me with Steps for Installation and Configuration of RCA functionality- which includes all the Java and ABAP stack monitoring which includes- Trace, Workload, DB Cokpit, Host Analysis etc . We plan to install the Willy and BMC Appsight.
    Appreciate your help.
    Regards
    Bob C

    Bob,
    Here is my experience in config RCA.
    Read all documents from [http://service.sap.com/diagnostics]
    Install Solman with latest SPs available.
    Finish basic post install activities as per installation guide.
    Run T-Code "SOLMAN_SETUP" and go through each step.
    Install Wily Introscope Enterprise Manager.
    Assign proper security roles to RCA Work center
    deploy Introscope Agents.
    create Autoprobe
    Configure E2E RCA scenerio
    - Digesh

  • Workspace 11.1.1.3 can't open Task-list in Basic mode

    Hi,
    I'm using EPM 11.1.1.3 on Weblogic 9.23, MS SQL, Win2003R2 EE
    User's task list has been created and successfully opened by user in Planning and Workspace (Advanced mode).
    He'd like to open this task list in Workspace (Basic mode).
    Workspace get error "There a communication error while loading tree data".
    Workspace's and Planning's logs has no information about this exception.
    What's a problem? Pls help me!

    Hi,
    I would try going direct to planning and see if you get this error, it should hopefully produce something in the log if you go directly.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Significance of configurable task list

    Please explain the significance configurable task list and how this is done in the system?

    For Ex.  Pulsar  servicing center
    Pulsar 135 and 150  are coming for maintenance
    Operations to be done
    Lube oil flushing  - common for 135 & 150
    Piston 135 replacement - only for 135
    Piston 150 replacement - only for 150
    We can input 135 or 150 in the order to select the operations related to 135 or 150
    If you select 135, Lube oil flushing & Piston 135 replacement wiill appear in the order operations
    This is the configurable task list.
    For this
    Create Equipment  IE01
    Create class characteristics with class type 300 CL04 & CT01
    Create dependency Cu01
    Create General task list and assign dependency for operations IA05
    Create configuration profile for general task list CU41
    Create order and select the task list

  • New DMS document attachment to order header - can it also be done to a task list?

    With business function LOG_EAM_CI_6, you can now attach DMS documents to the order header or operation level in the 'Additional Data' tab.
    Since a lot of clients use documents to list complex preventive maintenance instructions, is it also possible to attach a DMS document to a task list header (or operation) and have it show up in the new 'Additional Data' screen area of the resulting order (using a maintenance item/plan to generate the order)?  Or do we still have to use the task list operation PRT functionality and have it show up in the order's operation PRT?

    Hi Arthur,
    I have configured Task list as per the SAP note 1821916  & activated DOC_TL_GUI. This allowed me to attach documents to the Operation &/or Header of the Task Lists. The problem I am facing is when I assign the task list to the work order the documents are not transferred . You have stated that they have transferred to the work order so I am wondering if there is something I missed.
    Arthur Balajthy wrote:
    And I checked that by adding documents to a task list header or operation, the work order generated from a maintenance plan/item referencing that task list does have those documents attached also.
    I haven't tried from a Plan but will do that now.
    I assumed if they were attached to the Task List Operation they would transfer to the Work Order like everything else on the Task List
    Thanks in advance

  • User defined fields in task list

    What is the significance of adding user defined fields in task list operation?

    Dear Maniaba
    We have used user fields in task list to capture quantity in terms of nos & its weight for each operation. This we used as a work around to capture the repair jobs quantity & tonnage. While mapping repair of a particular machine with out any reference to material(that is we have not created them as serialised material as in the case of refurbishment) we have created task list for its repair and user wanted to capture the quantity of repair (say how many & also its weight) so we have maintained the tonnage per 1 no in these fields. later when order is being created user selects the task list & changes the quantity field then we have developed report where we calculate the total tonnage of that job & also no of items repaired.
    Regards
    S P Behera

  • Equipment Task List

    Hi PM Experts,
    I have a general doubt in PM task list.
    When I open a Equipment task list with transaction IA03, and go to the components assigned to an operation.
    There i can see  a field "Holder" ... can someone please explain to me what is this "Holder" field.
    Actually when i copy this routing to create another counter, the "Holder" is not getting copied.
    Please Help.
    Thanks,
    Rohit

    Hi,
    There i can see a field "Holder"
    I'm not aware of that field. Maybe it is a custom field or belongs to some IS-functionality. What is the field name (F1 - Technical information)  ?
    -Paul

  • Task list in hyperion planning dataforms 11.1.2 version

    Hi,
    I created a task list using administrator account and assigned these task list to user1. I mention a due date and alerts also. Here user1 have appropriate roles to access the dataform and to finish the task also.
    Now the issue is, when user1 finished and put the status as completed. But in admin user, those tasks status is showing as Incomplete.
    How admin will get that updated status as completed in task list.
    Regards,
    Madhu

    Hi David Mendele,
    Thanks for the reply.
    ya as u said i looked into report. but there also am getting status as incomplete using admin user.
    First of all i will explain u clearly about this issue.
    using admin account i created two task lists and assigned these tasks to user1. for example salary account and salary details ok.
    Now i login as user1 and put those task lists status as completed ok.
    Then now i login as admin and checked out those Task lists. In this scenario, am not getting those task lists(*salary account* and salary details) status as completed.
    It is still showing that status as Incomplete only which is already finished by user1 ok.
    Now, how can i get those assigned task lists status as completed automatically using admin user.
    I hope u understand about the issue.
    Regards,
    Madhu
    Edited by: 895234 on Nov 30, 2011 8:01 AM

Maybe you are looking for