Reading the Groupwise Field Definition

Hi,
I am trying to get a particular field definition (User defined) on the AddressBook.
IGWFieldDefinitionPtr pIGWFieldDefinitions;
HRESULT hrStatus = pIGWFieldDefinitions->Item(vFieldName, vFieldType, &pDIGWFieldDefinition);
The above statement returns the negative HRESULT in some cases.
But the Advanced tab of the AddressBookEntry shows the field.
Any reasons for this behavior?
Thanks.

Did you ever find a solution to this problem? I'm having the same problem...

Similar Messages

Groupwise Field Definitions for Address Book entry

Hi,
I am looking for Groupwise Field definitions i.e. Field Names associated with Address Book entry (Contact and Organization). I am using OAPI to access the Contact's field values and set the Contact's field values by Field Name. Is there any place which has the list of all the field Names associated with Contact and Organization Address Book entry.
Note: Field Definitions for Address Book entries that are in PAB.
I also look for the comparision of Field Names in Groupwise 7.0 and Groupwise 8.0.
Thanks,
Pranav

Why don't you iterate through all the field definitions of a given abook?
This will give you the list of all possible fields for an entry.
Markus
"pranov2001" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
>
> Hi,
>
> I am looking for Groupwise Field definitions i.e. Field Names
> associated with Address Book entry (Contact and Organization). I am
> using OAPI to access the Contact's field values and set the Contact's
> field values by Field Name. Is there any place which has the list of all
> the field Names associated with Contact and Organization Address Book
> entry.
> Note: Field Definitions for Address Book entries that are in PAB.
>
> I also look for the comparision of Field Names in Groupwise 7.0 and
> Groupwise 8.0.
>
> Thanks,
> Pranav
>
>
> --
> pranov2001
> ------------------------------------------------------------------------
> pranov2001's Profile: http://forums.novell.com/member.php?userid=82100
> View this thread: http://forums.novell.com/showthread.php?t=406199
>

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

HOW TO READ THE EDITABLE FIELD IN ALV

CAN ANYONE HELP ME IN READING THE EDITABLE FIELD IN ALV.
I AM DOING THE FOLLOWING.
BUT STILL THE EDITABLE FIELD IN NOT READ.
WHEN 'EXE' OR 'EXEC'.
LOOP AT I_RB1 INTO L_WA_STRU.
L_WA_STRU-LIFSK = L_WA_STRU-LIFSK1.
MODIFY I_RB1 FROM L_WA_STRU.
CLEAR L_WA_STRU.
ENDLOOP.
I_RB1 IS MY TABLE WHICH I PASSED IN TABLES OF REUSE_ALV_GRID_DISPLAY.LIFSK1 IS MY EDITABLE FIELD.
AND LIFSK IS THE FIELD WHERE THE DATA SHOULD GET TRANSFERRED WHEN I HIT EXECUTE BUTTON.

DATA: lt_display LIKE TABLE OF gt_display.
REFRESH lt_display.
CLEAR lt_display.
lt_display[] = gt_display[].
CLEAR ref_grid.
IF ref_grid IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
    CALL METHOD ref_grid->check_changed_data.
ENDIF.
IF lt_display[] NE gt_display[].
    gv_tosave = 'X'.
ENDIF.
Check this program. It will help you.
awrd points if helpful
Bhupal

How to read the "Name" field from document library in workflow?

Hi,
The task I'm trying to accomplish looks pertty simple: I need to read a value of the item's "Name" field inside the workflow. I try to do it using LookupSPListItem and GetDynamicValueProperties activities. I can get value of the "Title"
field, also I created custom field and can read it too.
But the "Name" field always comes empty.
I guess I need to use some tricky syntax or this field has some different "internal name"?
The workflow is designed in VS 2013.

Thank you. Looks correct, since when I enter this path (FileLeafRef) into GetDynamicValueProperties
and change Entity Type to list of documents it changes to Name
automatically.
But somehow it doesn't work too. (:
I also tried LinkFilenameNoMenu and LinkFilename
- same result.
EDIT: Solved. :)
Looks like FileLeafRef is not loaded by default by LookupSPListItem, so you have to pass this property name via
Properties collection. The bad news is that in this case other properties won't be loaded if you didn't add them to this collection.
Anyway, it works. :)

How to read the comment field of the Leave of absence Workflow.

Hi,
I have attached a custom Workflow template to the
Standard class "CL_HRASR00_WF_PROCESS_OBJECT" and event "TRIGGERED" for my Personal leave of absence approval.
During the Workflow step, once the approval goes to the final approval step and it is there in the Benifit Administrator's inbox (Portal) for approval, the Benift Admin is having an option of Withdrawing the process(Withdraw Process button). After filling the comments field, once he clicks this withdraw button the standard class "CL_HRASR00_WF_PROCESS_OBJECT" event "WITHDRAWN" gets triggered and it calls a separate workflow.
I need to capture this comment in the new Workflow but not able to do the same.
Can anyone let me know how can I do this. The event container does have any parameter to pass this value to the workflow container. And since the Step_Object GUID also changes I am unable to read it in the second workflow.
Looking for some real help as this has become critical for the project.
Thanks is andvace.

Hi All,
Thanks for your reply Trevor, but I guess you misunderstood my question. What I am not looking for is not the absence data. Basically I need to capture the comments put in by the Benifit administrator in the Leave of absence application form (Personal or Maternity/child care ), incase when he goes for withdrawing the Application submitted by the Employee.
To elaborate it functionality step by step...
1. An employee logs on to portal and submits a LOA application with a few mandatory field ( Commencing date,Returning Date, Reason).
This kicks of a Workflow say WF1 attached to
ABAP Class- CL_HRASR00_WF_PROCESS_OBJECT, Event- TRIGGERED.
2. Then after executing a few tasks to retrive data it goes to the Manager for approval. Once the manager appoves it goes to the Benifit Administrator.
3. The Benifit Administrator can approve the application or has an option of withdrawing it.
4. In case the Benifit Administrator goes for Withdrawal, after putting some comments in the form, it triggers the Event-WITHDRAWN of ABAP Class-CL_HRASR00_WF_PROCESS_OBJECT.
5. This event in turn starts a new Workflow WF2.
6. In this Workflow WF2 I need to pull in the comments put in by the Benifit Admin.
How can I pull this comment?

How to read the input field value into ABAP variable?

Hi All,
i need a read the value of an input field into an ABAP variable,and i am doing this in the following way
lstring = request->get_form_field('myFlag').
here 'myFlag' is the input field name,but this is not returning me any value into lstring.
I have gone through the SDN and tried to do this.
could you please help me out to resolve this issue.
Thanks in Advance,
Praveena

Dear Praveena
In which event are you putting this code. Place it in oninputprocessing event(Page with flow logic Model of coding). Then it will surely work.
Regards
Vijay.M

Populating-Reading the Event Field in CS4

The "IPTC Core" Schema for XMP version 1.1 released on July 2009, refers to the "Event" Field which was not included in the version 1.0 of the IPTC schema. This field is not avaialble in the annotations panel in bridge CS4 or in the metadata panels in PhotoShop. The annotations panel in Microsoft Expression Media include the Event Field even when the preferences are set to the nomenclature used by Adobe and refers to it as EVENT.
Questions:
Is there a way to populate the Event Field and to read annotations using CS4?
Is there an add in? Is the "Event" field refered by anohter name?
Would new versions of CS4 support it?
Thank you,
Alejandro R

Hi Jonathan,
Thanks for the suggestion.
My approach is like this.
First I'll create a ZProgram with the selection screen with the following fields.
Employee No
Employee Name
Mode of transport (By Road or By AIR)
Travel Order No
Grade
Destination Country
From Date
To Date
No of Days of travel
Authorized %
Based on the Above information we need to calculate the Total Amount(Travel Allowance Amount for the total trip as Advance)
to calculate the amount we have to construct a ztable which hold the eligible amount based on the employee grade and the country he is travelling.
Once the amount is calculated we have to click on a button that takes us to F-43 Screen. In the first screen we will input the required information and click on Fast Data Entry Button. This take us to the second screen where we have Amount Field from BSEG-WRBTR table. This field needs to be calculated from our selection screen inputs and automatically that value needs to be populated here.
Then we need to save the information and the document is posted if the said budget is available.
Hope my requirement is clear.
Please try to suggest me how I can go ahead in populating the amount field.
Thanks in Advance,
Regards,
Kumar

How to Read the Screen Fields after a Transaction ?

Hi all,
I am working on the Transaction 'O4K_LICENSE'. After the transaction is run, it generates an Internal License number which is displayed on the screen. I tried using 'GET PARAMETER', but as the CALL TRANSACTION is called within a loop, the SAP Global memory is not getting refreshed and iam getting the same value for every loop for the Internal License Number.
Is there any function Module other than DYNP_VALUES_READ to get the screen field values? I tried using the above function module, but in vain and it is not getting any values.
Warm Regards,
Vijay.

Well .... let me explain this very clearly.
The table OIHL has a composite primary key which is the combination of "External License Number" and "Internal License Number". The latter is generated after running the O4K_LICENSE transaction.
Moreover, iam attaching every record with a record generated in the program. Now, the same User(ERNAM) can create records having the same External License Number.
For example:
If i created a record yesterday with an external License Number 123, then say an internal lic no of 3 is assigned to it.
If i Create another record today with the same external lic no of 123, and an internal no of say 20 is attached to it, then i donot have any criterion to select the one which i have created today, as it fetches both the records.
To add to the worst, there is no timestamp field also.
Message was edited by: Vijay Sai

Reading the required fields from a pdf document

Hi all,
My requirement is, How can i get the required field values from a scanned document which is in pdf format. Can anyone provide the idea how to approach this using Java.
thank u all .

function(){return A.apply(null,[this].concat($A(arguments)))}
Scribby182 wrote:
-How can I remove this function altogether? There is no significance to the image filenames and I'd rather not have to ensure they all match the document text.
I'm not aware of anyway to automatically remove them from the pdf file. You can manually remove each of them but it's always better to treat the source file than to treat the PDF file for changes.
To keep from seeing them without having to remove them all in Word, just use the "print method" to create the PDF file. Print to the Adobe PDF printer rather than using the Save as Adobe PDF feature.
Regards,
Joe

Read Data from the dynamic Field Symbol with key ?

Dear All,
I've 2 dynamic internal tables in the form of field symbols.
Now,I want to loop the item field symbol, read the header field symbol content and then move the corresponding into a final field symbol.
How to read the field symbol with key ?
When I'm trying to give the key clause in the paranthesis it's giving a syntax error.
Any clues ?
FYI .....
* Get the Dynamic Field and Value for the Date/Year and convert it into Year value
LOOP AT <fs_t_son> ASSIGNING <wa_son>.
    ASSIGN COMPONENT gwa_znrows_def-fieldname OF STRUCTURE <wa_son> TO <fs_year>.
    IF sy-subrc = 0.
      CLEAR gv_string.
      MOVE <fs_year> TO gv_string.
      CLEAR gv_year.
      gv_year = gv_string.
      <fs_year> = gv_year.
    ELSE.
* When the Date/year Field is not in the Table then -->
* Get the Dynamic Field and Value
      ASSIGN COMPONENT gwa_znrows_def-kfldname OF STRUCTURE <wa_rson> TO <fs_value>.
* Populate field for Dynamic Where condition
      CLEAR gv_value.
      CONCATENATE '''' <fs_value> '''' INTO gv_value.
      CONCATENATE gwa_znrows_def-kfldname '=' gv_value INTO gt_where SEPARATED BY space.
      APPEND gt_where.
      CLEAR gt_where.
      READ TABLE <fs_t_rson> ASSIGNING <wa_rson> ( gt_where ). "Key clause
    ENDIF. " if sy-subrc = 0. "Assign
ENDLOOP.
Thanks & regards,
Deepu.K

TYPES: BEGIN OF line,
         col1 TYPE c,
         col2 TYPE c,
       END OF line.
DATA: wa TYPE line,
      itab TYPE HASHED TABLE OF line WITH UNIQUE KEY col1,
      key(4) TYPE c VALUE 'COL1'.
FIELD-SYMBOLS <fs> TYPE ANY TABLE.
ASSIGN itab TO <fs>.
READ TABLE <fs> WITH TABLE KEY (key) = 'X' INTO wa.
The internal table itab is assigned to the generic field symbol <fs>, after which it is possible to address the table key of the field symbol dynamically. However, the static address
READ TABLE <fs> WITH TABLE KEY col1 = 'X' INTO wa.
is not possible syntactically, since the field symbol does not adopt the key of table itab until runtime. In the program, the type specification ANY TABLE only indicates that <fs> is a table. If the type had been ANY (or no type had been specified at all), even the specific internal table statement READ TABLE <fs> would not have been possible from a syntax point of view.

Creating table / field definition

HEllo,
I am trying to create a table using Microsoft Access Driver with the following field definitions:
createStatement =
"CREATE TABLE Employee(SSN VARCHAR(9)PRIMARY KEY, "
+ "FirstName VARCHAR(15), LastName VARCHAR(15), "
+ "MiddleInitial CHAR, BirthDATE DATE, SALARY DECIMAL(10,2), "
+ "DNO int)";
Unfortuately I am getting error when I compile. (CREATE TABLE Employee(SSN VARCHAR(9)PRIMARY KEY, FirstName VARCHAR(15), LastName VARCHAR(15), MiddleInitial CHAR, BirthDATE DATE, SALARY DECIMAL(10,2), DNO int)
java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in field definition.
Cannot figure out what could be wrong in my code....
If somebody could glance at it and have any suggestions, please

thanks for the advise, but my ORACLE book is oriented
to create tables with SQL....
Anyway still looking for the solution of "mistery"
of my "syntax error field definition"If you're suggesting that the SQL that Oracle recognizes and the SQL Access recognizes are the same, I think you're mistaken. I would follow DrClap's advice (this is just generally a good thing to do) and look for Access-specific documentation.

How do we read the values in a tiled view,in the submitted form ?

Hi,
I have a form, which is having a tiled view. Each row in the tiled
view has a check box. I have to read these check box selections, once
the page is submitted. Is there any built in mechanism in JATO to do
this ?
One way I know is to maintain a hidden field in the form and have a
javascript handler to create a string to reflect the check box
selectios and set that string as hidden field value, before submitting
the form. On the serverside read the hidden field's value and parse
that string to get the selections.
Are there any other options?
Thanks in Advance,
syam.

While a front panel variable is inside a loop, it's not available to other loops.
I want to access the value of the variable in many loops.
And I want to write to a front panel variable in many loops, too.

Read only custom field for particular user

Hi,
I have requirement to few enterprise custom field should be edited by only top management,Project manager and team member can only read the same field.
Like i have one custom enterprise baseline finish date,which need to update by only IT GM,and other staff can see only as read mode.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hasan,
You have few options, based on the route you want to take"
1) You could control the "Visbility" of the fields, via using a feature like
Target Audiences .
However,this may not control the same custom field on the page based on user permissions.
2) Use JavaScript: https://badalratra.wordpress.com/2013/05/04/how-to-disable-pdp-custom-fields-using-javascript/
3) Jquery: http://epmainc.com/blog/locking-custom-fields-pdp-project-server-2013-using-jquery
4) Customization: https://epmxperts.wordpress.com/2014/01/20/secure-pdp-pages-as-per-project-server-security/
5) You could look into a third part product, by Fluent Pro: https://help.fluentpro.com/pdp_manager/start
I realize these may not be exactly what you need, but with some effort, I am sure you could modify the code and reuse.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

[Application Update Error] - The element 'Field' in namespace 'urn:deployment-manifest-schema' cannot contain text.

Hello,
I developed a custom SharePoint 2013 Application (SharePoint hosted) and everything works fine. If I tried to update the application and I ran into the following error:
The element 'Field' in namespace 'urn:deployment-manifest-schema' cannot contain text. List
of possible elements expected: any element in namespace '##any'.
If I redeploy the application (without update, just a new instance) everything works fine. Only the update scenario throws the exception above.
I tried different things to solve that issue:
I recreated the feature
I checked all the custom field definitions, content types and lists inside the app.
I tried different O365 tenants and a SharePoint 2013 On Premise Development Server (Same problem on all systems)
Can anybody give me a tip to solve that problem?
Thanks in advance

Hi,
According to your description, when you try to update your SharePoint Hosted App, an error occurs.
To narrow down the issue, I would suggest you create a simple app without other components in it, deploy it and then update it to see if this error will still occur.
Once you get a workable app without the update issue, then you can add other customizations one after one in this app and perform the update. By doing this, it would
be easier to find out the root cause.
Anyway, you can take a look at the link below about updating app for more information:
http://msdn.microsoft.com/en-us/library/office/dn265910(v=office.15).aspx
Feel free to reply if there any progress.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Reading the Groupwise Field Definition

Similar Messages

Maybe you are looking for