Readonly Access to Solution Manager possible?

Hello experts,
at the moment we are using Solution Manager mainly for managing the
system landscape and projects/Business blueprint.
My question, which role needs to be assigned if we want to give a user
readonly access to projects (RMMAIN)?
In RMMAIN is it possible to give readonly access to one project and
change access to another project?
Is it possible to give full readonly permission to the Solution Manager?
Thanks a lot in advance for your help,
Manfred

Thanks for your help.especially the mentioning of the object S_PROJECT proved to be invaluable!
However, in the end some-else suggested to use the solution manager display role SAP_SOL_RO_COMP. This is a composite role holding all (or at least the most important) display roles regarding SOLMAN. I then just copied these single roles to my namespace and adjusted the S_PROJECT field according to my needs. Then I assigned these roles to the target user.
Thanks again for your help,
Best regards
Manfred

Similar Messages

Restricting Access in Solution Manager by Business Unit?

Hi Experts
We are currently in the process of upgrading our Solution Manager to 7.0 EHP 1. Business wants to restrict access in Solution Manager by business unit. Is this possible? Is it possible to create derived roles which restrict on buisness unit without having to custominze? If it is possible which object needs to be maintained? I'm already aware of restricting access by project using S_Project but this still allows users to view other projects. The requirement is that users only view projects for their business unit.
Please advise experts.

Hi There,
I dont see any reason why you cannot acheive your objective in SolMan, You should be able customize views per business under SPRO_ADMIN and derive required view with in PFCG role separated by business.
Yes, You can also do derived roles concept in Solman and restrict by Org Units.
Guys - Do you differ from my opinion?
-AJ
Edited by: AJ on May 19, 2010 3:47 PM

ABAP Access on Solution Manager

Hi,
Is that possible for ABAP Work Bench Access ( se38 and se80 ) on Solution Manager where i can develope RFC ( enable functional module ) interface on solution manager 4.0 and also want to develop web service for those interfaces so that those interfaces are consumed by third party system.is that Posssible ? else any other solution let me know? it will be very help full

you can use the ABAP stack of your SolMan as an ordinary ABAP Development System based on Netweaver
Nesimi

Autom. replication of EarlyWatch Alerts in 2nd Solution Manager possible?

Hi experts,
I just received a question from a customer whether it is possible to automatic replicate EarlyWatch Alerts generated for systems in SolMan A to SolMan B without having all satellite systems connected to SolMan B.
There are two reports available I know: BDL_GET_SESSION_DATA and BDL_GET_DATA_AND_CREATE_SESSIO
At least via the last report it is possible to read the session number in SolMan A and create a new session with this data in SolMan B. But it is not possible to assign the sessions to a solution or run it as daily job...
Do you know if there is such a functionality in SAP standard or do we need to build our own solution here?
Regards, Richard

Hello,
This is how you genrate an EWA for on Satellite system in two Solution Manager systems.
One will be created automatically via the Maintenance Package (providing you followed best practices) or periodic EarlyWatch of Solution Manager Task if you are not follwoing best practices.
Say we have Solution Manager A & B. In SDCCN in RFC Destinations, we define Solution Manager A as the Master.
So this will be where the EWA task created by the Maintenace Package task will be sent.
For the Solution Manager B you created a Earlywatch periodci task, only you make the RFC Destination the SM<SID>CLNT<NO#>_BACK (where the SID is the SID of Solman B) Yoy can refer to SAP NOTE 207223, which is the Note that explains how to send an EWA to SAP. Its the exactsame process, but the destination is changed to the second Solution Manager.
The data comes from the Satellite/managed system, but can be directed to different destinations.
But you can't send the data from Solution Manager A to Solution Manager B.
You can send the data to Solution Manager A & B and process the data on A and on B, or any other Solman system.
Regards,
Paul

How to access SAP Solution Manager from webDynpro Application.

Hi to all,
I have to retrieve some informations from SAP Solution Manager. and update some recordes there itself. How could i do it??
If anybody have codes related to it please send the same.
Please help its urgent.
Waiting for reply.
Thanks and Regards;
Pankaj Kumar.

Hi
See this help
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/6e8c42c398173be10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/4c/758c42d781d665e10000000a155106/frameset.htm
Kind Regards
Mukesh

Using saprouter in solution manager 4.0 environment with SMD

I am currently using Solution manager 3.2 (on SAP basis 6.20 technology). We have not used any Solution Manager functionality that necessitated using the internal ITS, thus all access to solution manager SAP has been through sapgui or RFC. Both these protocols can be routed through saprouter and we make use of this fact, having placed non-natting firewalls between both sapgui users ans SAP; and some ccmagents and SAP.
Now we want to move on to solution manager 4.0 with the JAVA stack and also run SMD. We need SMD because we have also begun using SAP Netweaver 04 Enterprise Portal (Java only SAPs) which we wish to monitor with SAP solution monitor. The portals are all on an internet facing eithernet segment outside the non-natting firewall protecting our ABAP SAPs (including Solution Monitor host).
Is it possible to route SDM agent connections to SDM through saprouter? If so, are there any examples?
What about sapwebdispatcher? Can it also be routed through saprouter? examples?
What about SLD? same questions...
What about Mercury Loadrunner?

No! No! I am not interested in using a saprouter between OSS and my http connection that is effectively http://myhost:5xx00/smd. I am wondering about the SMD agent connection to SMD server (and vise versa). The hosts I want to monitor cannot ping the solution monitor diagnostics machine, but ccmsping via saprouter is possible. Can the SMD agent talk to the SMD server via saprouter? Examples? Can the SMD server talk to the agent via saprouter (perhaps different saprouter)?
SMD agent ---> firewall1 --> intranet --> firewall2/saprouter --> SMD server
SMD server --> firewall2/saprouter --> firewall1/saprouter --> SMD agent

EP and Solution Manager Via Webdispatcher

Solution Manager Via Webdispatcher
Dear All,
We have installed the Webdispatcher 7.4 and did the SSL setup and maintained necessary parameters to access our Portal and ECC systems from internet and its working fine for indepedent Java and ABAP stack.
Now when we are trying to access the solution manager via webdispatcher using webgui, it opens but when its calling the webdynpros like solman_setup, the page is not openning. The same case is in our portal system also, when its calling the webdynpro of backend system its not openning.
During our analysis we found the urls are called from the local machine to the backend host (ABAP) directly and there is no where its communicating the webdispatcher.
Can you please guide me what kind up setup can be done to access the Portal and solution manager complete functionality via webdispatcher.
I have checked many posts on the forum and was totally confused on the solution approches. So trying to filter it down to do a proper setup which is feasible to our landscape and infra team.
FYI Our Solman is on 7.1 SPS10 and portal is on 7.4, OS windows
Looking forward for your valuable inputs
Thanks & Regards,
Satyabrat

Thanks Samuli,
I tried it..its working for solman but in my ECC (NW 7.31) its not working for web dynpros. Its going to hostname:8001 port and not redirecting to webdispatcher.
Pleae let me know if I am missing something.
Thanks & Regards,
Satyabrat

Error when trying to launch solution manager

Good morning all...
I am having trouble when I attempt to access the solution manager. When I am at the main screen for SM (the one with the horizontal display of the projects, early watch report number, system monitoring number, etc.), and double click any of the projects, early watch reports, system monitoring, etc. I get the following dump:
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Except.                CX_SY_REF_IS_INITIAL
Date and Time          06.10.2006 08:34:03
Short text
     Zugriff über 'NULL' Objektreferenz nicht möglich.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
      caught in
     procedure "SET_SESSION_BUFFER" "(METHOD)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     Es wurde versucht mit einer 'NULL' Objektreferenz (zeigt auf 'nichts')
     auf eine Komponente zuzugreifen.
     Eine Objektreferenz muß auf ein Objekt (eine Instanz einer Klasse)
     zeigen, bevor man sie zum Zugriff auf Komponenten nutzen kann.
     Entweder die Referenz wurde noch nie gesetzt, oder sie wurde mit
     einer CLEAR Anweisung auf 'NULL' gesetzt.
Missing RAISING Clause in Interface
     Program                                 CL_DSWP_CI_SESSION_DB=========CP
     Include                                 CL_DSWP_CI_SESSION_DB=========CM00A
     Row                                     1
     Module type                             (METHOD)
     Module Name                             SET_SESSION_BUFFER
I have searched OSS and SDN, but don't find anything related to this class.
Any help is appreciated!

Hi Joseph,
check out note 963354, it's a new one as of yesterday
Regards,
Pascal
PS: don't forget to assign points

Remote Function on Solution Manager

Hi,
i need a remote function to access the Solution Manager, from R3. Someone can help me?
Thanks!

Hi,
Please follow the SAP help link to have more clarity on connecting R/3 to solution manager.
http://help.sap.com/saphelp_sm40/helpdata/en/1a/b42441cd87a12be10000000a1550b0/content.htm
Best Regards,
Krishna

SRM based on Solution Manager content

I look at SRM architecture and there is no SM gets involved.
But why each SAP SRM document says that SRM is based on SM content?
How to access the Solution Manager to get the SRM process description -- as instructed by the SRM documents?
I appreciate your help on this.
Regards.

Hi,
Have you imported solution manager contents to your SAP Solution Manager Server?
Have you setup project in Solution Manager?
Please go to transactions SOLARADMIN, SOLAR01 nad SOLAR02.
Regards,
Masa

Accessing Solution Manager CHARM Via SAP CRM

Hi
Is it possible to accces charm of soultion manager via SAP CRM
If so how does it work and documentation are welcomed
Thanks in advance
R-K

option 1
> customise sap crm to cater for the external product in terms of what solution manager charm / service is currently doing for sap componet
. Create all the status for this products eg: transport is in Dev for product A, Transprot is in QA for product A or product is in Prod then test and close the call
> access solution manager from crm (NB: work center / service desk can be accessed through crm) the problem is WE NOT SURE OF CHARM
> also customise crm to cater for IT related issues like broken laptop or netowrk cable not working or IT related query,
Option 2
> intergrate the external product to solution manager o
> Customise CHARM / service desk to cater for this external product in solution manager the way it does for sap components / ibase

Error accessing transaction SOLMAN_WORKCENTER in SAP Solution Manager

I get the error below when I try to access workcenters in SAP solution Manager ehp1 via transaction SOLMAN_WORKCENTER
Error while processing your query
What has happened?
The URL call http://sol.test.com:8000/sap/bc/webdynpro/sap/ags_workcenter was terminated because of an error.
Note
The followin error text was processed in smc the systm: Syntax error in program CL_POWL_UTIL==================CP .
The error occurred on the application server sol_smc_00 and in the work process. 0
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_QUERIES of program CL_POWL_QUERY_API=============CP
Method: GET_WORKLISTS of program CL_CONTROL_CENTER_API_FOR_POWLCP
Method: IF_AGS_CONTROL_CENTER_API~GET_WORKLISTS of program CL_AGS_POWL_BASIC=============CP
Method: GET_WORK_LIST of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: IF_COMPONENTCONTROLLER~GET_WORK_LIST of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: HANDLEDEFAULT of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/0ALGK7P51EY0JCPIHVQ5==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
What can you do?
With the termination type RABAX_STATE you will find in the system smc in transaction ST22 more information on the cause of the termination.
With termination type ABORT_MESSAGE_STATE you will findon the application server sol_smc_00 in transaction SM21 more information on the cause of the termination.
With termination type ERROR_MESSAGE_STATE you can scan for further information in the trace file for the work process 0 in transaction ST11 on the application server. sol_smc_00 It is possible that an analysis of the trace files for the other work processes is necessary.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 001 -u: lolli -l: E -s: smc -i: sol_smc_00 -w: 0 -d: 20110415 -t: 165748 -v: RABAX_STATE -e: SYNTAX_ERROR -X: 00235AB4EF731EE099F78539B74CB1A5_00235AB4EF731EE099F78537687251A5_1 -x: 29BC67E0BACDF16BB1A500235AB4EF73
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
How do I resolve this error?

Hi Mateus,
Thanks for your keen interest in assisting.
This is an excerpt from ST22....even though i am not an ABAP person.
Error in the ABAP Application Program
The current ABAP program "CL_POWL_QUERY_API===========CP" had to be terminated becuase it has come accross a statement that
unfortunately cannot be executed.
The following syntax error occured in program
"CL_POWL_UTIL===========CP" in include
"CL_POWL_UTIL===========CM007" IN
line 48:
"Incorrect logical expression: ")" without preceding "("."
The include has been created and last changed by:
Created by "SAP"
Last changed by: "BODE"
Error in the ABAP Application Program
The currect ABAP Program "CL_POWL_QUERY_API=============CP" had to be terminated becuase it has come accross
a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_POWL_UTIL===========CP".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look at and manag termination messages.
and you can also keep them for a long time.
When i clicked on the ABAP Editor in ST22, I have the code below
method GET_QUERIES.
data: ls_authorities type powl_authorities_sty,
        lt_vistypes type powl_type_tty,
        lt_visqueries type powl_query_tty,
        ls_api_query type powl_query_asty.
field-symbols: <fs_query> type powl_query_sty.
cl_powl_util=>do_authority_checks_for_user(
    exporting
     i_applid = i_applid
     i_user   = i_user
    changing
     c_authorities = ls_authorities
lt_vistypes = cl_powl_type_accessor=>get_visible_types(
      i_applid = i_applid
      i_langu = sy-langu
      i_username = i_user
lt_visqueries = cl_powl_query_accessor=>get_visible_queries(
     i_applid = i_applid
     i_authorities = ls_authorities
     i_langu = sy-langu
     i_username = i_user
     i_vistypes = lt_vistypes
loop at lt_visqueries assigning <fs_query>.
    move-corresponding <fs_query> to ls_api_query.
    insert ls_api_query into table result.
endloop.
endmethod.
The cursor is on this line containing the statement below
"cl_powl_util=>do_authority_checks_for_user("

Solution Manager 4.0/When accessing services as ex. showing graphic in Proj

Hi,
We have just upgraded from Solution Manager 3.1 to 4.0. When accessing services as ex. showing graphic in Projects, tab graphics shows: " Service cannot be reached.
What has happened?
URL http://dnismpa.danisco.com:1080/sap/bc/solman/defaultUser/graphic/solmangraphic.htm call was terminated because the corresponding service is not available.".
Services activated as told in IMG/Activate Solution Manager Services. Service user created as in IMG/Create Service User for HTTP access. Alias created as in IMG/Create Alias for Business Server Pages and Create Alias for Document Manager Service.
Please, can anybody advise on this issue. Thanks in advance.
Med venlig hilsen / Best regards
Hanne Münther
Danisco IT/SAP-Basis
Danisco A/S

Hello,
Same problem here. Did you find a solution to your problem ?
Regards.

Solution Manager 4.0 Title says "SAP Easy Access CRM"

Hi,
We installed Solution Manager 4.0 on Solaris/Oracle.
Solution Manager 4.0 Title in Easy Access page says "SAP Easy Access
Customer Relationship Management"
I want to change the title. So I created a customer message with SAP. They gave following steps. I followed these steps. It just displays the title. I don't see any option to edit the existing title.
Did you come across this situation?. If so, can you please shed some light?. Thank you very much for your time.
Steps
The menue which is displayed as initial menue can be defined in the IMG
(transaction SPRO) under the following path:
SAP Solution Manager Implementation Guide
- SAP Customizing Einführungsleitfaden
- SAP NetWeaver
- Application Server
- System administration
- Definition on initial menu
Please change this to: AI_SOLAR -SAP Solution Manager

What was the solution?
Hamed

How to access introscope enetrprise manager in solution manager

Hello All,
I have installed Introscope enterprise manager on Solution manager system in windows successfully
Now when I am executing introscope enetrprise manager,just a command prompt opens and nothing happens.
Any ideas?
Also How can I access introscope enetrprise manager?are there any different ways to do it?
Rohit

Hi Rohit,
If your Enterprise Manager is setup and running. You can access it via wily webview or Workstation.
These are the standard GUIs avaialble for accessing data in EM.
1) Webview is a webbased tool, and you can access it through browser - http://<hostname>:8081/webview
2) Workstation- you have to install this in your PC and connect it to EM, Its more powerful tool than webview and you need to hava pre-requisite java version installed.
but, by which mehtod you are trying to open EM??.. EM contains only logs.
When you say setup is complete, is the EM's services running?..
Also, while performing the Basic Configuration- You have to map the EM data to solution manager and perform the Diagnostics setup step. Then you can launch the webview from workcenter -Root cause Analysis.
Hope this helps.
Thanks,
Jagan
Edited by: jagadheeshan govindasamy on Sep 4, 2009 5:18 PM

Readonly Access to Solution Manager possible?

Similar Messages

Maybe you are looking for