Real probelms with 9.2 check the www Crisis looming if nt fixed!
I am a 30 years experienced user. I posted the earlier issues. You will have a crisis either today with ios4 or on Thursday with 9.2 I have installed both on xp32 and win7 ult64. hours to backup phone and in initial error on drivers on 2 unrelated machines.
I don't understand which instructions I have to make for oracle upgrade?
-- You have to follow all the instructions mentioned
(Just check for few if's for Cluster enabled, OID and OLAP databases. Perform these steps only if they apply)
Must I also make the 3. instruction? Connect to databse prior and drop?
-- Yes you should do
Must I also make the post install action for my database?
(startup migrate ...)
-- Yes. Do run catpatch.sql .
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
-- In this step make sure you do step 1
1: Java VM and XML DB Requirements
Otherwise catpatch.sql will fail.
Do 2 and 3 only if applicable
Chandar
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?
Similar Messages
-
hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance
Hi,
The quickest way to do this (tested with OS 10.8.2, MS Word 2011) is in one line:
tell application "Microsoft Word" to close every document whose name begins with "book"
The reason why your script doesn't work is that you aren't specifying to Word which document you want it to close.
So, changing one line ought to do it:
close document incrementvalue -- instead of "close document"
But... when you close a document, you change the document count. Document 2 becomes document 1, document 3 becomes document 2 etc. So eventually you'd get a message saying "The object you are trying to access doesn't exist".
Because of this, if you want to do it in a repeat loop, you have to work backwards:
tell application "Microsoft Word"
set doc_count to count documents
repeat with x from doc_count to 1 by -1
if name of document x begins with "book" then close document x
end repeat
end tell
Hope this helps. -
== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersMark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders -
It will not let me delete all this stuff...... OS 10.6.8 is now up and running and all software updated..... I used that file to dig out music and photos and such...... Took me 15 hours to do all this yesterday but al is working like new...... I just need to dump this old stuff now... thanks again
Read > http://support.apple.com/kb/ht1710 You are referring to Previous System folder, at the root level of your hard drive.
Just open a Finder window, select Go menu (on the menu bar) > Go to Folder, and type /. Then, move "Previous System" to Trash and empty Trash -
My father's MAc is still on Snow Lepoard. Ovewr the weekend his Mail sent out over 400 emails to contacts. We were unable to delete the messages. 1. Does anyone know what the problem is 2. If so how can we fix it.
PBThanks. Will di immediately. Do you think I need to change the address as well or should just the password be sufficient.
PB -
How to check the power supply? iMac G3 233
How to do it?
Can i just take the case with the mainboard out and "short" the pins Power on (pin 8) with GND and check the voltages on the connector that comes out of the monitor case?
I know that the pin 8 is the power from articles about imac>atx case conversion.And i know that you can power up a normal ATX power supply by shortening two pins, and want to know if i can do the same with iMAc power supply. I don't want to fry anything.Sounds like you have eliminated most of the possibilities, other than power supply board or motherboard. But it may also be the CPU daughter card that is faulty. I had one (233 MHz) that would run Mac OS 9 just fine, but it was unable to run Mac OS X reliably (crashes and freezes after a few minutes). I replaced it first with a 333 MHz G3 card off of eBay and later with a 467 MHz G4 card from the Fastmac booth at MacWorld San Francisco two years ago.
If you are comfortable disassembling the iMac to the point of removing the power supply board, you can layout the PS board and the carrier assembly (the thing you pull out with the motherboard, CPU card, and drives) on a table top. Then connect the power supply board to the carrier assembly, and connect the external power cord plug to the power supply board, and connect a keyboard with a power button to the carrier.
To measure the voltages, you can disconnect the 4-pin connector to the hard drive. If you turn it on using the power button on the keyboard, it will not start up with the hard drive not powered up (unless you use a bootable CD), but the system should be powered so that you can take your measurements.
Hope that works. Be careful with the exposed back end of the CRT. Keep any curious cats out of the room while you do this...
In case you don't have the PDF of the tray-loader iMac tech manual, it is downloadable here.
http://www.baconeggs.co.uk/manuals/index.htm -
please help me it is a card of 25 dollars and i dont want it to go to waist i by mistake thought you used a frake email so i made one up i thought i was going to have a new one but then it said it was going to send a verifaction to my email so then i tried to use a real email and put in the code but it just kept on saying invalid code. check the code and try again. and i dont know what to do can u please please help me it was a gift and i really dont want it to go to waist please i need help
for #1
Frequently asked questions about Apple ID - Apple Support
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
for #2
Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy -
Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
How to check the checkbox of Adobe Installer with the Aplescript??
Hi All,
am trying to Install Adobe Flash Player thru stand alone Installer, I want to check the check box and need to click on Install button,
Whem am trying to get the entire contents of window thru UIElementInspector, am unable to get the contents of checkbox and Install buttons..
I just tried myself with the below script to click the checkbox, but did not succeed, error saying unable to get the checkbox.. Pls suggest how to check..
tell application "System Events"
tell process "Adobe Flash Player Install Manager"
set frontmost to true
click the checkbox "I have read and agree to the terms of the Flash Player License Agreement" of window "Adobe Flash Player 11.5 Installer."
end tell
end tell
Pls check the below link to view the image of the Adobe Flash Player Installer.
https://docs.google.com/document/d/1yzyBTrvi94QxjlEAlcbudOBpXiTGPEI2LA3D1iEo8Gw/ editI'm working on a similar script, but when I execute the script, I run into this error:
error "System Events got an error: Can’t make {563, 234} into type list." number -1700 from {563, 234} to list
Any ideas? Here's the background: I'm trying to click the search box on this page: http://www.alexa.com/siteinfo/payeasenet.com
Here's my UI Inspector results of said element:
<AXGroup>
<AXScrollArea: “”>
<AXWebArea: “”>
<AXGroup: “”>
<AXGroup: “”>
<AXTextField: “Enter a search query”>
Attributes:
AXRole: “AXTextField”
AXSubrole: “AXSearchField”
AXRoleDescription: “search text field”
AXChildren: “<array of size 0>”
AXHelp: “”
AXParent: “<AXGroup: “”>”
AXPosition: “x=550 y=212”
AXSize: “w=214 h=30”
AXTitle: “Enter a search query”
AXDescription: “”
AXValue (W): “”
AXFocused (W): “1”
AXEnabled: “1”
AXWindow: “<AXWindow: “Payeasenet.com Site Info”>”
AXSelectedTextMarkerRange (W): “(null)”
AXStartTextMarker: “<AXTextMarker 0x60800024af80 [0x7fff758b4eb0]>{length = 24, bytes = 0xbd040000000000006024c514010000000000000001000000}”
AXEndTextMarker: “<AXTextMarker 0x600000248a30 [0x7fff758b4eb0]>{length = 24, bytes = 0xbf0400000000000040420c17010000000100000001000000}”
AXVisited: “0”
AXLinkedUIElements: “(null)”
AXSelected: “0”
AXBlockQuoteLevel: “0”
AXTopLevelUIElement: “<AXWindow: “Payeasenet.com Site Info”>”
AXNumberOfCharacters: “0”
AXSelectedText (W): “”
AXSelectedTextRange (W): “pos=0 len=0”
AXVisibleCharacterRange (W): “pos=0 len=0”
AXInsertionPointLineNumber: “0”
AXTitleUIElement: “(null)”
AXAccessKey: “(null)”
AXRequired: “0”
AXInvalid: “false”
AXPlaceholderValue: “”
AXARIABusy: “0”
Actions:
AXPress - press
AXShowMenu - show menu
AXScrollToVisible - AXScrollToVisible -
first you tell me my question is too long then when I edit you tell me to fill in extra!!!
'''<u>AVG Free</u>'''<br />
*Firefox does not disable your security software, just the toolbar that it installs. Your security software is still working in the background to protect you.
*Keep up to date with what is happening with AVG by visiting their forums: http://forums.avg.com/us-en/avg-forums
*Have you updated to AVG 2012 Free Edition?
*Read the 2nd item on the following page first, then read the first item:
**http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=171860
'''<u>Posting a question of the Firefox Support forum</u>'''<br />
Some tips on post forum questions. Look at the 2 images below and the explanations of the fields in the Firefox Support forum "Ask a question" form. Click on the images, or right-click on them to open in a new tab, then click the image in the new tab to enlarge it for easier reading.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
How can i check the realtime ability of my program with LV 6.1?
Hi, i did use a PXI-6053E daq card with Labview RT 6.0.3, after upgrading to
LV 6.1 the single scan vi in my control loop displays no error, if i put too
much stuff in the loop. i check data remaining, everything exactly as in
the example i attached. With Labview 6.0.3 i did use the opcode "read
oldest" all the time and got a "1" at data remaining output if runnig too
slow. How can i check the realtime ability of my Program with LV 6.1? The
attached example is running with 35kHz and green RT-LED, even if i put a
"wait 1 ms" in the loop.
Thx4help.
Joerg
[Attachment Optimized HW Timed Loop.llb, see below]
Attachments:
Optimized_HW_Timed_Loop.llb 242 KBYou should still be able to use the data remaining output of AI SingleScan to indicate that you are maintaining real-time as you did in LabVIEW 6.0.3. If this is not working properly for you, you might try wiping out the ni-rt folder on the RT system and re-installing the RT software on it through MAX on your host computer. Check the versions you have. If you are still seeing data remaining = 0 even when you are running your loop significantly slower than your scan rate, you might want to contact the LabVIEW RT group at National Instruments for additional assistance.
-
I just bought this movie "Godzilla 2014" but it won't show in my Movie Library. I closed my Itunes and put it back on again but still won't show up. I checked my purchased list and it shows that I recently bought the movie but when I checked the itunes store it wants to buy the movie again. Please help me with this right away Apple.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
I have an apple iphone 4gs... It is synced with my outlook exchange in the office. If I do a search for emails that also checks the server then all of a sudden I end up with various amounts unread email with the inbox saying "Inbox 71" ..which is not true. The only way to make the inbox on the iphone back to 0 is to delete the account then re install it.
Anyone have any ideasWe need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.
-
Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?
Was your Bootcamp info.plist manipulated to change any options?
-
Tried purchasing music from the iTunes Store. When the window popped up I put in my apple id and password. Then I was directed to a 'Terms and Conditions' page. I checked the box next to the 'Yes I agree to these terms and conditions' - then clicked the 'accept' button next page read 'Your Session has timed out. Try again.' with a 'Done' button to click on. Oh the same thing happens when i try to download free iTunes. Yes I have tried & tried it again I even logged off and singed back in-- no joy
After accessing my iTunes account I was not able to change anything like my credit card number when I tried and was sent right to the 'Your session has timed out. Try again.'
The last time I purchased any anything was on September 25th 2011 and the 'terms & conditions' page was last updated on October 12, 2011
Does anyone have an idea to what is going on with my iTunes version 9.2.1 (5) and I can not upgrade to a higher version my iMac does not have the intel processor chip.Thank you for your time and help with this matter. You are greatly appreciatedI am having the same problem also! I posted on here about it, but no one has responded with ideas. I called technical support and e-mailed them, the only suggestions they gave was for the to turn off my firewall. But I didn't change anything, so it shouldn't suddenly stop working. Maybe this is just an iTunes issue? But it doesn't even recognize my account anymore, and I cannot log in now.
If you happen to get an answer, will you please let me know what works for you?
Thanks!
Maybe you are looking for
-
I have searched all the ways I know about this. I have FF V28 on my PC. I downloaded FF v 28.0.1 and I cannot get the 3 bar / dot menu on my Note 10.1-2014 tablet. All your support notes describe the possibility of using my Home button, main button a
-
1.4.2_02 repaint issues
Hi. I have a swing app that is having repaint issues on 1.4.2_02. Things like table rows being added are not always showing unless a repaint is forced by dragging the window round. It all works perfectly well in 1.4.2_01. Anyone experiencing similar
-
Until yesterday mac mini wifi used to work fine. Ping works OK, it is only when a browser is used that the page does not load. TraceRoute shows only first 2 entries and then after a long pause it bursts out upto 8 entries and then it prints Three sta
-
Hey Everyone, I am actually plugging in a value (the name of the app) into the Header Text field for the page. I cannot figure out how to change the font size. I have tried everything I can think of in html, mainly setting it to H1. Is there a way to
-
Anyone know how to get the templates for illustrator?
Anyone know how to get the templates for illustrator?