Real time ERRORS

Hi
Can any body send me the real time errors, that you faced in production support, i will give you the full points to you, Plz forward to mail id [email protected], Iam waiting for your positive reply.
Regards
manikanta

Hi
check this
HI,
Errors in Extraction
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic ZCUSTSAL already deleted .
1)extraction job aborted in r3
2) request couldnt be activated because theres another request in the psa with a smaller sid
3) repeat of last delta not possible
4) datasource not replicated
5) datasource/transfer structure not active
to add few more
Refer following forum posts:
Extraction errors
Re: LIS extraction errorS
Errors occured during extraction
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Re: data loading errors
Business Intelligence Old Forum (Read Only Archive)
Check Siggi's weblog for error in any extraction
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Also...
Errors occured in the extraction
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
LO weblogs
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
Just to add few mores.
1) Idoc Or Trfc Error
2) Processing Is Overdue For Processed Idocs
3) Error At Source System Asking For Replication Of Datasources
4) Lock Not Set For Loading Master Data ( Text / Attribue / Hierarchy )
5) Data Error
6) Other Type Of Data Issue
7) Error While Loading Pc File From Desktop / Application Server
8) Job Failure At Source System
9) Error Asking For Initialization
10) Error Related To Activation
11) Transaction Job Failes Giving Message : No Sid Found For Certain Data Record
Hope it helps
regards
CK
ASING POINTS IF USEFULL

Similar Messages

Pls send me Real time SM21 and ST22 errors.at least 4

Hi,
       I am new guy in Basis .Pls send me SM21 and ST22 real time errors.I will give more reward points.
regards,
Jana

Hi janardan
Here I am sending the lists of some real time errors that i have encountered during my monitoring work:-
SM21
1) 06:14:20 DIA 001 010 ALEREMOTE         AB0 Run-time error "CALL_FUNCTION_SEND_ERROR"       occurred
2) 08:09:13 DIA 002 010 ASCHELVI     SA38 AB0 Run-time error "TIME_OUT" occurred
3) 05:45:03 BTC 003 000 SAPSYS            D01 Transaction Canceled BT 510 ( )
4) 10:32:55 DIA 003 010 WORKFLOW          H01 Enqueue of work item 000023517979 deleted by called   application.
ST22
1) 10.04.2008 11:34:17 sapbebr104 FFERNAND 010 C RAISE_EXCEPTION    1
2) 10.04.2008 12:47:23 sapbebr102 JIGOMEZ 010 C SYSTEM_CANCELED    4
3) 09.04.2008 12:48:13 sapbebr104 MLOLMEDO 010 C TIME_OUT    1
4) 01.04.2008 07:46:11 sapbebr042 BMARIQUE 010 C LOAD_PROGRAM_LOST    3
In SM21 u can look for messages like :
>Printer problems
>Signal 11
>Short dumps
>Time-outs
>Matchcode problems
>Aborted postings
>Runtime error analysis
ST22 is used for some abap dump analysis
Award points if found helpful.
Regards,
Abinash

TCP/IP Connecting with Real Time Controller

I have a host running Labview on a windows XP and a realtime embedded controller on a pxi chassis that acts as the server. When the realtime is started it automatically goes into listen mode and listens for a connection from the host. The host opens a connection. After a valid connection is open the Real-Time side goes into a TCP_Read and the host can then send commands that the real time processes and sends to the FPGA on the pxi-chassis.
Now the problem I'm having is how to handle the case when a TCP connection is lost. I can have the TCP_Read on the real-time error on a time out and then go into a listen mode but this isn't very logical because then the host will have to reconnect each time a time out occurs. So if I make the TCP_Read timeout be infinite and if the connection is lost (let's say I unplug the ethernet cable and re-plug it back in) then I cannot recover from this and the Real-time will need to be re-booted.
I've tried to send the Real-time into listen mode if the error code is other than a timeout error (code 56) and have it go back to TCP_read mode if it is a timeout error. But if the connection is lost by means of a physical way (such as me pulling the ethernet wire and plugging it back in) then the Real-Time never sees that the connection is invalid. The host on the other hand can detect it bc it will get an error when it's trying to write?
So my is:
Is there any way to prevent an infinite loop that needs a reboot and at the same time prevent the host from reconnecting every time there is a timeout?

Hi SJeane,
I apologize for taking so long to respond, but I wanted to test this on my end. In doing so, I realized that using the RT Reboot Controller.vi after the connection is lost does not work because the message to reboot cannot be relayed to the target without communication! Thus, to solve this problem, we have to approach it a different way. You mentioned that you tried programmatically clearing errors, but did you try to reestablish connection after clearing the errors? I tested this on my end with a FieldPoint controller, and the attached VIs resumed operation even after unplugging/replugging the Ethernet cable (no reboot). Will this solution work for you?
Peter K.
National Instruments
Attachments:
Reestablish.zip ‏39 KB

Hypervisor: Create Standalone Real-Time Application (Error at deploying: File not found)

Hello,
I am using Hypservisor. With "Build Specifications" in the project explore I want to create a standalone real-time application.
In my first try I only want to print some texts onto the real-time console (HyperTerminal) using the function "RT Debug String.vi". I built the real-time application successfully and got the rtexe-file locally on the windows system. But as I tried to deploy the application to the target system, I got the error: "File not found". Please check the attached file "error.txt" for details.
I don't understand which file is not found. Or I used "\" as path separators. Is it wrong? I'd appreciate if you'd have any idea of the problem. Thank you very much.
Regards,
Scarletice
Solved!
Go to Solution.
Attachments:
ERROR.txt ‏1 KB
builds.zip ‏153 KB

Hello Casey,
Thank you very much for your reply and your interest in our project. We are using Real-Time Hypervisor for the setup of our test stand. We use the Windows system to show the GUI and the Real-Time system for the real-time machine control and online data storage. We use shared variables and shared memory for the data exchange between the two systems.
The system works generally quite fine now. But we still have to face new problems at each step forwards. I'm sure, I'll have more questions. I'd appreciate your advices. Thanks sincerely.
Best regards,
Scarletice

More than 1 ms MOMO digital IO 7358 in LabView Real-Time 8.5, error downloading EPOS dll file into RT

Hi all,
I have several problems here, I tried to google but still I could not solve the problem.
Here are my questions:
1. I tried to download an example program of EPOS which require to download a DLL file into the RT, but it failed, here's the error (I attached the picture) 01/02/2008 13:29:50.511 [error] LabVIEW:
Failed to load shared library EposCmd.dll:_VCS_GetProtocolStackName@16:C on RT target device.
From the NI.com forum,
I found a similar problem and it said by installing Network Variable Engine and Variable Client Support into the LV-RT, and I did, but still failed. Any one can help me about this?
2. I posted a question also in lavag, I think this section is more appropriate. "I
am trying to use the digital IO of the motion controller of 7358, but then I realized the delay is more that 1 ms (I checked using the oscilloscope), I attached the code (MOMO = Must On Must Off). Is this real, I mean the hardware delay between on-off is as big as this? Anyone knows the solution for this?"
Note: I am using LV-RT 8.5, PXI-7358 Motion Controller, EPOS 70/10
Thank you for any help
Message Edited by bono02 on 01-02-2008 05:47 AM
Attachments:
maxon-rt3.JPG ‏120 KB
momo1.JPG ‏55 KB

Hello bono,
1. From what I have seen, this error is usually caused by one of two things. The first is the Shared Variable software components not being installed, which is covered in this Knowledgebase. The other is due to a corruption of the ni-rt.ini file on the Real-Time controller. You can follow the steps layed out in this Knowledgebase, which gives three possible remedies. You could also try reinstalling the software (firmware) or create a PXI Uninstall disk from Measurement & Automation Explorer by selecting Tools»Remote Systems»RT PXI Disk Utilities»Create PXI Uninstall Disk. Boot the PXI Controller from the PXI Uninstall Disk, which will erase the ni-rt.ini and ph_exec.exe on the target. However, you will need to reconfigure the controller after doing this.
2. Due to the nature of the digital I/O on motion controllers, it is not surprising that you are seeing around a 1ms delay. It deals with the fact that it must update the motion controller with the new value on each control loop. This Knowledgebase gives a little more clarification regarding the 7350 specs.
Carlton
CLD

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error while data loading in real time cube

HI experts,
I have a problem. I am loading data from a flat file.The data is loading correctly till the DSO but when i am trying to load it into the cube it is giving an error.
The cube is a real time cube for PLANING. I have chnaged the status to allow data loading but still the DTP is giving an error.
It shows an error "error while extracting from DataStore" and some RSBK 224 ERROR and rsar 051 error.

What was the resolution to this issue. We rae having the same issue only with external system (not a flat file). We get the RSAR 051 with a return code of 238 error message, like it is not even getting to the rfc connection (DI_SOURCE). We have been facing this issue for a while and even opened up a message with SAP.

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

Need your help !!! -- Authorization error for Real-Time Bex query

Dear experts:
I have a Bex query built on a multiprovider, this multiprovider is consist of one standard cube and one real-time cube(virtual provider). When I run this query, I can retrive the data and no error occured, but when others execute this query, they will get the error message below:
Operation Generate a Request could not be carried out for DTP DTP_D7JVT8DGBQWPWL13VIUITNODG
You do not have authorization for the data transfer process
Errors occurred during parallel processing of query 2, RC: 3
Error while reading data; navigation is possible
Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
I used tcode rsecadmin to track the authorization, when I execute as user XXX, I can get the same error above, but when I go to "Display Log", no error showed there.
Did anybody meet the same error before? How to resolve that?
Any post would be appreciated and thank you all in advance!
Tim

I think there is some missing authorization,here
the user has no access to execute the DTP.
You can analyse it in rsecadmin or also see
which object you are getting in su53.
Thanks,
Saveen

Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

Hello
I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
message arose on my iPC:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an
older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
database to the real-time system. ========================= NI VeriStand: NI VeriStand
Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
Definition file... • Connection with target Controller has been lost.
The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
almost the same. The only differences are:
1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
1. LabVIEW Real-Time 11.0.1
2. NI-488.2 RT 3.0.0
3. NI_CAN 2.7.3
Unfortunately the above stated problem still arose.
What can I do to fix this problem?
I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
There it is written to deploy the dbc file againt.
If this is a good hint, so how do I deploy a dbc file?
I would feel very pleased if somebody could help me! :-)
Best regards
Lukas Nowak

Hi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan

Error building source distribution of a project containing real-time utility VIs

I'm using Labview 8.0.
When building the source distribution of a project I get the following message:
An error occurred while building the following file:
C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\real-time\rtutility.llb\FPC pad/strip string to size.vi
I'm using "RT reboot controller.vi" and "RT ping controllers.vi" in the project.
Anyone can tell me how to solve the problem?
Is it correct that the filename of a VI contains the character "/"? (FPC pad/strip string to size.vi)

Hi!
You fall in a LabView library error..sorry.
As you have imagined the problem is the slash in the filename and to solve you have to remove it. Go to ..\National Instruments\LabVIEW 8.0\vi.lib\real-time\rtutility.llb and rename the file.
Let me know if this solve.
Ciao
Clara
AE Manager
NI Italy

X121e randomly wake up from suspended status and real time clock error

Hi all
Previously I considered my x121e suffer from overheating issue and causes real time clock error (RTC). However, after more testing and investigation, I believe the problem is related to other hardware issues and I like to hear people opinion before sending the laptop back to Lenovo.
The machine goes into suspend status either pressing the power button or closing the lid from Windows7 (clean install) without problem. However, it would wake up itself randomly, "beep" twice and screen shows RTC and CMOS checksum error. This happen more often when I am holding the machine (i.e. some movement/vibration). I wonder:
- Is it the RTC battery problem, cause the RTC to wake up the machine?
- Other hardware failure?
The laptop has a clean OS installed/recovered. Latest 1.16 Bios installed. No USB or memory card attached. Ram replaced and not the cause.
Please advise
Howard

Hello,
I am unsure; you would have to contact Lenovo directly and find out how they handle this situation. They may want the ThinkPad X121e back so they can run thorough diagnostics on it, just in case the problem is something else. That way it gets fixed the first time.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Error 53 PID Autotune with Real-time fieldpoint control

Hi!
I cannot perform the autotuning PID parameters in fieldpoint cFP-2000 (Real-time control).
It gives me the error 53 as you see in the attachment file. It seems to be because of the autotune wizard vi...???
How can i solve this problem?
Thanks for your help!
Nunix
Portugal
Attachments:
error 53.bmp ‏166 KB

Hello,
LabVIEW RT does not currently support the autotuning feature, because the procedure invokes a wizard that requires user interaction. LabVIEW RT does not support this type of user interface. This wizard is tightly integrated with the PID function itself and would require significant redesign to work in LabVIEW RT.
It is the autotuning VI itself that is not compatible with LabVIEW RT. You can use the "PID Autotuning.vi" as long as you are not targeted to your RT engine. Run your VI in development mode with the "PID Autotuning.vi" in your code. After you receive your tuned gain settings, replace the autotuning vi with the normal "PID.vi" and use your tuned gains for the inputs. You can now target to your RT engine with tuned gains.
Hope it s help.
Isabelle
Ingénieur d'applications
National Instruments France

Error: 0271: Real Time Clock Error - Check Date and Time settings.

Hello all,
I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
Any advice would be appreciated.

Thanks to everyone for the help. Just want to close this out. I had a IBM/Lenovo technician here today and he replaced the CMOS battery. Upon the change, the computer is fine being reconnected to the dock (the three times I tried it). So it has been resolved with the battery. Surprised by the incompatibility claim because I am not having issues now. Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
Thanks!

Real time ERRORS

Similar Messages

Maybe you are looking for