Error while data loading in real time cube

HI experts,
I have a problem. I am loading data from a flat file.The data is loading correctly till the DSO but when i am trying to load it into the cube it is giving an error.
The cube is a real time cube for PLANING. I have chnaged the status to allow data loading but still the DTP is giving an error.
It shows an error "error while extracting from DataStore" and some RSBK 224 ERROR and rsar 051 error.

What was the resolution to this issue. We rae having the same issue only with external system (not a flat file). We get the RSAR 051 with a return code of 238 error message, like it is not even getting to the rfc connection (DI_SOURCE). We have been facing this issue for a while and even opened up a message with SAP.

Similar Messages

Error while data loading

Hi Gurus,
I am getting error while data loading. At BI side when I check the error it says Background Job Cancelled and when I check in R3 side I got the following error
Job started
Step 001 started (program SBIE0001, variant &0000000065503, user ID R3REMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_11_V_ITM
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000683008                              *
abap/heap_area_total.......... 4000317440                              *
abap/heaplimit................ 40894464                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500352                                 *
ztta/roll_extension........... 3001024512                              *
4 LUWs confirmed and 4 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Please help me out what should I do.
Regards,
Mayank

Hi Mayank,
The log says it went to short dump due to temp space issue.as its the source system job ,check in the source system side for temp table space and also check at the BI side as well.
Check with your basis regarding the TEMP PSA table space - if its out of space ask them to increase the table space and try to repeat the load.
Check the below note
Note 796422 - DBIF_RSQL_SQL_ERROR during deletion of table BWFI_AEDAT
Regards
KP
Edited by: prashanthk on Jul 19, 2010 10:42 AM

Short Dump Error While Data load

Hi Experts,
Data load to an ODS in production server has been failed because of Short dump error. The error message shows " OBJECTS_OBJREF_NOT_ASSIGNED ".
Request you to please help me out with a solution ..
Regards,
Vijay

Hi Vijay,
follow the steps below (May Help you)
Goto Monitor screen>Status Tab> using the wizard or the menu path >Environment -> Short dump> In the warehouse
Select the Error and double click
Analyse the error from the message.
1.-->Go to Monitor
-->Transactional RFC
-->In the Warehouse
-->Execute
-->EDIT
-->Execute LUW
Refresh the Transactional RFC screen and go to the Data Target(s) which have failed and see the status of the Request-->Now it should be green.
2.In some cases the above process will not work (where the Bad requests still exists after the above procedure).
In that case we need to go to the Data Targets and need to delete the bad requests and do the update again
Regards,
BH

Error while deploying project to Real Time Decision Server

Hi,
I followed the link : Creating an Inline Service - 11g Release 1 (11.1.1) to create an inline service.
I was able to develop this, but, while deployment through eclipse; I am facing the following error.
[2013-11-13T16:12:48.935+05:30] [bi_server1] [NOTIFICATION] [] [oracle.wsm.security.policy.scenario.util.ScenarioUtils] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 7863b382e4716382:-f0e14fc:14251056623:-8000-000000000000156d,0] [APP: OracleRTD#11.1.1] [J2EE_APP.name: OracleRTD_11.1.1] [J2EE_MODULE.name: ws] [WEBSERVICE.name: WorkbenchEndPointService] [WEBSERVICE_PORT.name: WorkbenchEndPointPort] [WSM_POLICY_NAME: oracle/wss_username_token_service_policy] Configuration property reference.priority value is null
[2013-11-13T16:12:48.935+05:30] [bi_server1] [NOTIFICATION] [] [oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 7863b382e4716382:-f0e14fc:14251056623:-8000-000000000000156d,0] [APP: OracleRTD#11.1.1] [J2EE_APP.name: OracleRTD_11.1.1] [J2EE_MODULE.name: ws] [WEBSERVICE.name: WorkbenchEndPointService] [WEBSERVICE_PORT.name: WorkbenchEndPointPort] [WSM_POLICY_NAME: oracle/wss_username_token_service_policy] Recipient Alias property not configured in the policy. Defaulting to encrypting with signers certificate.
[2013-11-13T16:13:09.410+05:30] [bi_server1] [ERROR] [RTD-10307] [oracle.rtd.logger] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 7863b382e4716382:-f0e14fc:14251056623:-8000-0000000000001571,0] [APP: OracleRTD#11.1.1] [J2EE_APP.name: OracleRTD_11.1.1] [J2EE_MODULE.name: ws] [WEBSERVICE.name: WorkbenchEndPointService] [WEBSERVICE_PORT.name: WorkbenchEndPointPort] Management Service error[[
java.lang.ExceptionInInitializerError
at com.sigmadynamics.sdo.access.impl.ObjectFactoryImpl.createSDApplicationType(ObjectFactoryImpl.java:1463)
at com.sigmadynamics.sdo.access.impl.ObjectFactoryImpl.create(ObjectFactoryImpl.java:140)
at org.eclipse.emf.ecore.xmi.impl.XMLHelperImpl.createObject(XMLHelperImpl.java:739)
at org.eclipse.emf.ecore.xmi.impl.XMLHandler.createObjectFromFactory(XMLHandler.java:1386)
at org.eclipse.emf.ecore.xmi.impl.XMLHandler.createObjectByType(XMLHandler.java:754)
at org.eclipse.emf.ecore.xmi.impl.XMLHandler.createTopObject(XMLHandler.java:779)
at org.eclipse.emf.ecore.xmi.impl.XMLHandler.processElement(XMLHandler.java:462)
at org.eclipse.emf.ecore.xmi.impl.XMLHandler.startElement(XMLHandler.java:449)
at org.eclipse.emf.ecore.xmi.impl.SAXWrapper.startElement(SAXWrapper.java:73)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501)
at com.sun.org.apache.xerces.internal.impl.dtd.XMLDTDValidator.startElement(XMLDTDValidator.java:767)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:1363)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$ContentDriver.scanRootElementHook(XMLDocumentScannerImpl.java:1315)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:3104)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(XMLDocumentScannerImpl.java:921)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:647)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:808)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205)
at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522)
at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:133)
at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:173)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
at org.eclipse.emf.ecore.xmi.impl.XMLLoadImpl.load(XMLLoadImpl.java:140)
at org.eclipse.emf.ecore.xmi.impl.XMLResourceImpl.doLoad(XMLResourceImpl.java:169)
at org.eclipse.emf.ecore.resource.impl.ResourceImpl.load(ResourceImpl.java:988)
at com.sigmadynamics.sdo.loading.Metadata.createSDOFrom(Metadata.java:249)
at com.sigmadynamics.sdo.loading.Metadata.createSDORoot(Metadata.java:159)
at com.sigmadynamics.sdo.loading.Metadata.getSDTypes(Metadata.java:322)
at com.sigmadynamics.sdo.loading.SDA.getAppName(SDA.java:417)
at com.sigmadynamics.workbench.commands.DeployAppCommand.internalExecute(DeployAppCommand.java:99)
at com.sigmadynamics.workbench.commands.DeployAppCommand.execute(DeployAppCommand.java:80)
at com.sigmadynamics.workbench.commands.WorkbenchExecutionContext.execute(WorkbenchExecutionContext.java:53)
at com.sigmadynamics.ws.workbench.server.WorkbenchEndPoint$DeploymentExecutionContext.execute(WorkbenchEndPoint.java:149)
at com.sigmadynamics.workbench.access.impl.WSParamImpl.doExecute(WSParamImpl.java:171)
at com.sigmadynamics.ws.workbench.server.WorkbenchEndPoint.deploy(WorkbenchEndPoint.java:87)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:370)
at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:202)
at oracle.j2ee.ws.server.jaxws.JAXWSRuntimeDelegate.processMessage(JAXWSRuntimeDelegate.java:477)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1187)
at oracle.j2ee.ws.server.WebServiceProcessor$1.run(WebServiceProcessor.java:1131)
at oracle.j2ee.ws.server.WebServiceProcessor$1.run(WebServiceProcessor.java:1129)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:74)
at oracle.security.jps.internal.jaas.AbstractSubjectSecurity$ActionExecutorWrapper.execute(AbstractSubjectSecurity.java:242)
at oracle.security.jps.internal.jaas.CascadeActionExecutor$SubjectPrivilegedExceptionAction.run(CascadeActionExecutor.java:83)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.security.Security.runAs(Security.java:61)
at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:51)
at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:56)
at oracle.security.jps.internal.jaas.AbstractSubjectSecurity$ActionExecutorWrapper.execute(AbstractSubjectSecurity.java:242)
at oracle.j2ee.ws.server.provider.GenericProviderPlatform.runAs(GenericProviderPlatform.java:458)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1149)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:581)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:235)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:195)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:487)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at java.lang.Package$1.run(Package.java:527)
at java.lang.Package.defineSystemPackage(Package.java:520)
at java.lang.Package.getSystemPackages(Package.java:511)
at java.lang.ClassLoader.getPackages(ClassLoader.java:1513)
at java.lang.ClassLoader.getPackages(ClassLoader.java:1511)
at java.lang.ClassLoader.getPackages(ClassLoader.java:1511)
at java.lang.ClassLoader.getPackages(ClassLoader.java:1511)
at java.lang.ClassLoader.getPackages(ClassLoader.java:1511)
at java.lang.Package.getPackages(Package.java:281)
at com.sigmadynamics.sdo.access.impl.SDApplicationTypeImpl.<clinit>(SDApplicationTypeImpl.java:1029)
at com.sigmadynamics.sdo.access.impl.ObjectFactoryImpl.createSDApplicationType(ObjectFactoryImpl.java:1463)
at com.sigmadynamics.sdo.access.impl.ObjectFactoryImpl.create(ObjectFactoryImpl.java:140)
at org.eclipse.emf.ecore.xmi.impl.XMLHelperImpl.createObject(XMLHelperImpl.java:739)
at org.eclipse.emf.ecore.xmi.impl.XMLHandler.createObjectFromFactory(XMLHandler.java:1386)
at org.eclipse.emf.ecore.xmi.impl.XMLHandler.createObjectByType(XMLHandler.java:754)
at org.eclipse.emf.ecore.xmi.impl.XMLHandler.createTopObject(XMLHandler.java:780)
at org.eclipse.emf.ecore.xmi.impl.XMLHandler.processElement(XMLHandler.java:462)
at org.eclipse.emf.ecore.xmi.impl.XMLHandler.startElement(XMLHandler.java:450)
at org.eclipse.emf.ecore.xmi.impl.SAXWrapper.startElement(SAXWrapper.java:74)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501)
at com.sun.org.apache.xerces.internal.impl.dtd.XMLDTDValidator.startElement(XMLDTDValidator.java:767)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:1363)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$ContentDriver.scanRootElementHook(XMLDocumentScannerImpl.java:1315)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:3104)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(XMLDocumentScannerImpl.java:921)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:647)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:808)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:121)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205)
at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:523)
at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:134)
at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:173)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:396)
at org.eclipse.emf.ecore.xmi.impl.XMLLoadImpl.load(XMLLoadImpl.java:140)
at org.eclipse.emf.ecore.xmi.impl.XMLResourceImpl.doLoad(XMLResourceImpl.java:169)
at org.eclipse.emf.ecore.resource.impl.ResourceImpl.load(ResourceImpl.java:988)
at com.sigmadynamics.sdo.loading.Metadata.createSDOFrom(Metadata.java:249)
at com.sigmadynamics.sdo.loading.Metadata.createSDORoot(Metadata.java:159)
at com.sigmadynamics.sdo.loading.Metadata.getSDTypes(Metadata.java:322)
at com.sigmadynamics.sdo.loading.SDA.getAppName(SDA.java:417)
at com.sigmadynamics.workbench.commands.DeployAppCommand.internalExecute(DeployAppCommand.java:99)
at com.sigmadynamics.workbench.commands.DeployAppCommand.execute(DeployAppCommand.java:80)
at com.sigmadynamics.workbench.commands.WorkbenchExecutionContext.execute(WorkbenchExecutionContext.java:53)
at com.sigmadynamics.ws.workbench.server.WorkbenchEndPoint$DeploymentExecutionContext.execute(WorkbenchEndPoint.java:149)
at com.sigmadynamics.workbench.access.impl.WSParamImpl.doExecute(WSParamImpl.java:171)
at com.sigmadynamics.ws.workbench.server.WorkbenchEndPoint.deploy(WorkbenchEndPoint.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:370)
at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:202)
at oracle.j2ee.ws.server.jaxws.JAXWSRuntimeDelegate.processMessage(JAXWSRuntimeDelegate.java:477)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1187)
at oracle.j2ee.ws.server.WebServiceProcessor$1.run(WebServiceProcessor.java:1131)
at oracle.j2ee.ws.server.WebServiceProcessor$1.run(WebServiceProcessor.java:1129)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:74)
at oracle.security.jps.internal.jaas.AbstractSubjectSecurity$ActionExecutorWrapper.execute(AbstractSubjectSecurity.java:242)
at oracle.security.jps.internal.jaas.CascadeActionExecutor$SubjectPrivilegedExceptionAction.run(CascadeActionExecutor.java:83)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.security.Security.runAs(Security.java:61)
at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:51)
at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:56)
at oracle.security.jps.internal.jaas.AbstractSubjectSecurity$ActionExecutorWrapper.execute(AbstractSubjectSecurity.java:242)
at oracle.j2ee.ws.server.provider.GenericProviderPlatform.runAs(GenericProviderPlatform.java:458)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1149)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:581)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:235)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:196)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:487)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
... 9 more
It would be great if any pointers can be provided to solve the same.
Thanks and Regards,
Vijay Inani

Also, this error is coming in Eclipse logs
javax.xml.ws.soap.SOAPFaultException: java.lang.ExceptionInInitializerError
at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:171)
at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:94)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:240)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:210)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:103)
at $Proxy32.deploy(Unknown Source)
at com.sigmadynamics.ws.workbench.client.WorkbenchServerClient.deploy(WorkbenchServerClient.java:50)
at com.sigmadynamics.studio.util.ServerConnectionData.deploy(ServerConnectionData.java:356)
at com.sigmadynamics.studio.util.DeployAction$DeployJob.run(DeployAction.java:187)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:76)

Error while data loading in BI

Hi gurus,
Our BI team is unable to load data from BI staging to BI Target.There is no data in BI Targets because of this Users can not test the BI reports. when they run it the header file status shows yellow instead of green.
Please help.
Regards,
Priyanshu Srivastava

The problem is that jobs logs cannot be written. for example for job
BIDTPR_6018_1 .
sm51
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event
sm21 F6 1 TemSe input/output to unopened file.
Can anybody tell how to resolve that.
Regards,
Priyanshu Srivastava

How to write data from query into Real time cube?

Hi All,
Can anyone explain me step by step how to write data into a real time cube from front end queries.
Thanks in advance

Hi
You can do this using Integrated Planning
You need to create a aggregation level on the Real Time infocube and can create Planning function/sequence, Variables if needed.
Then you can create query on this aggregation level and you can make the keyfigures Input ready in property pane and you can change the data and save it into cube.
Please find below help link which clearly explains step by step about Integrated Planning like creating input ready queries etc.,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Regards
Ravi

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Error in Unit conversion while data loading

Hi,
I have maintained DSO in Material (0MATERIAL) info object > Bex tab > Base unit of measure > ZDSO; Then loaded this ZDSO from std data source 0MAT_UNIT_ATTR so that all conversion factors into different units which are maintained in material master data in ECC would get loaded to this DSO.
Then I have created one Conversion type (ZCON) to read source unit from record and convert it to fixed unit "ST" with reference info object as 0MATERIAL. ST is customized UOM here.
I am using ZCON conversion type to convert Qty in base UOM to Qty in ST in Bex reports under conversion tab of key figure. Now as this is std functionally, conversion would automatically takes place using ZDSO (mentioned above) as source and target UOM are not from same dimension (Base UOM is EA and target UOM is ST).
If conversion factor to ST is not found in ZDSO then conversion to base UOM would happen automatically. Now this functionality is happening perfectly in Bex but its giving error if I use the same conversion type ZCON while data loads. Its giving error for those material for which ST conversion is not maintained. But when its not maintained by default it should convert it to base UOM, but its not converting and giving error in data loads.
Hope I am able to explain the issue.
Please help me on on this issue or any way around.
Thanks in advance.
Prafulla

Ganesh,
Can you please check out the Alpha Conversion Routine and also nodeid for that infoobject..
There might be some inconsistencies in the code..
Hope it helps
Gattu

Report on Real Time Cube and Master data

Dear Experts,
I am new to BI. I have created real time cube using some characteristics and top of that I built 3 reports with referring to Master data.
And in the 3 reports, I have used different characteristics for all the report expect one ( common in all the reports).
Now I have to create consolidated report using all the characteristics. I have build some sample reports but getting not assigned where there is no data.
How can I achieve this?
Thanks in advance,
Saravanan R

Hi suman,
Thanks for your reply .
I have attached the screen shot of the output. I have created the Infoset using info objects and real time cube, on top of that I have created query.
this is the problem am facing can please suggest on this .

BI 7 real-time cube load behavior changed after transport

Dears,
After I transported real-time cube from DEV to QA system, I found that all the real-time cube load behavior changed from 'can be loaded, planning not allowed' to 'can be planned, load not allowed'. What happened? Or I'm enpackaging this type cube with wrong step? Any suggestions are appreciated.
Best regards,
Gerald

Hi,
I think note 984803 can be usefull for you.
The link is https://websmp207.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=984803&_NLANG=E
Rgs
Antonino

Error While doing aggregate operaion in ASO cube using MaxL

Hi,
when I try to run a Maxl script against an ASO application to aggeragate the cube. I end up with an error msg as shown below.
ERROR - 1270102 - Merge and view build operations cannot be performed while data load buffers exist.
Maxl I used "execute aggregate process on database app_name.db_name stopping when total_size exceeds 1.5"
Please guide me on what caused this issue.
Thanks
Sathish

Is it working now?
If not maybe you have other buffers that still exist, you can also destroy buffers e.g. alter database ASOSamp.Sample destroy load_buffer with buffer_id 1;
Also restarting the database should clear the buffers, try restarting and then aggregating to see if it was a buffer issue.
Cheers
John
http://john-goodwin.blogspot.com/

Using Non cumulative key figure in Real time cube

Hi gurus,
I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
Thanks in advance
Regards,
Ravikanth

Hi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee.

Impact of real time cube on query performance and OLAP cache

Hi:
We have actual and plan cubes both setup as real time cubes (only plan cube is being planned against, not actual cube) and both cubes are compressed once a day.
We are planning on implementing BIA accelerator and have questions related to query performance optimization:
1/ Is there are any query performance benefits in changing the actual cube to be a basic cube (using program SAP_CONVERT_NORMAL_TRANS) if the F table is fully compressed
2/ Can OLAP cache be leveraged for the queries run against the real time cubes e.g. actual cubes
3/ What is the impact on BIA of having the actual cube as real time (whetehr or not there is data being loaded/planned during the day in that cube)
Thank you in advance,
Catherine

1) Is there are any query performance benefits in changing the actual cube to be a basic cube (using program SAP_CONVERT_NORMAL_TRANS) if the F table is fully compressed
From the performance point of view, tha actual cubes i.e std cubes are relatively better.
2) Yes OLAP cache can be leveraged for bringing up the plan query but all the calculations are done in the planning buffer.
3) Not sure.

Common errors in Data Loading

Can anybody tell me what are the common error we come across in BW/BI for following:-
1] Data Loading in Infocube/ODS/DSO
2] Aggregates
3] PSA
4] DTP
5] Transformations
Thanks in advance

Hi,
Here are the list of common issues we face while data loading in to BW:
Data Loading in Infocube/ODS/DSO:
1) Missing SID issue or missing master data
2) Data load cancelled becasue of various exceptions. Eg: Message Type 'x', DBIF SQL Error,
3) Data records found in duplicate
4) Alpha Confirming Vaue error
5) Invalid time interval
6) Time overlap error
7) Job Cancelled in source system
8) RFC Connection Error
9) Data Source Replication error
10) Data load locked by active change run
11) Attributes to target by user 'xyz'
12) Job cancelled as the previous load is still running
13) Target locked by a change run
(Some times data loads dont fail but run for long time then usual with out any progess, because of struck tRFCs in source sytem, source sytem performance is poor and the job is in release state for long time, etc...)
Aggregate Rollups:
1) Nofilled aaggregates available, rollup not possible
2) Rollup locked by active change run
3) Job cancelled because of various exceptions
PSA Updations:
1) Job cancelled because of various exception
2) Missing SID value
ODS Activaitons:
1) Request to be activate shoud be green - (Loading of data in to ODS in still going on)
2) Key exists in duplicate
3) Job cancelled because of various exceptions (Short Dumps)
Attribue Change Run:
1) Locked by a rollup
2) Job cancelled because of various exceptions
3) Locked by another change run
Hope it helps....
Cheers,
Habeeb

Changes to Real-time cube through input-field entry

Hello,
I have created query on Real-time cube (which has some data ) and enabled input-entry field for one of the key figures.
2).Created a "Push-button" to save the changes made in query.
Issue : changes are not saved at cube level , when i press "Push" button.
For Push button Properties, I used "Planning -specific Command" --> "Save"
Pls. let me know possible reasons and solution to the problem.
Thanks
CP

Hi,
Check at first that you dont have a lock data issue (TCODE SM12).
If you are using WAD or Query Analyzer, please double check the following:
1) Your input-ready query must be created based on the aggregation level but not direct to the real-time infocube.
2) In the Query Analyzer look into the query properties and check that Change Mode is marked on and the key figure properties on the PLANNING tabstrip check that you have at least one method for ready-input.
3) In WAD Data Provider is linked to your input-ready query.
4) Check your Analyzer web item looking for data binding to Data Provider just mentioned.
5) Add a couple of push-buttons with SAVE_DATA command and RESET_DATA also.
Please check step by step and try again.
Hope this helps.

Error while data loading in real time cube

Similar Messages

Maybe you are looking for