Real time Text feature added

Real time text will allowed to look what user have typed. It was often used by deaf poeple and HOH people.. IT must be combined with video calls and voice calls. It called to total conversation.

Can you explain a little bit how this feature differs from VoiceOver support? How would it be used?

Similar Messages

Sndpeek. real-time audio visualization

Homepage:
http://soundlab.cs.princeton.edu/software/sndpeek/
Screens:
http://soundlab.cs.princeton.edu/images/sndpeek.jpg
http://soundlab.cs.princeton.edu/images/sndpeek6.jpg
http://soundlab.cs.princeton.edu/images/sndpeek2.jpg
http://soundlab.cs.princeton.edu/images/sndpeek3.jpg
sndpeek is just what it sounds (and looks) like:
* real-time 3D animated display/playback
* can use mic-input or wav/aiff/snd/raw/mat file (with playback)
* time-domain waveform
* FFT magnitude spectrum
* 3D waterfall plot
* lissajous! (interchannel correlation)
* rotatable and scalable display
* freeze frame! (for didactic purposes)
* real-time spectral feature extraction (centroid, rms, flux, rolloff)
* available on MacOS X, Linux, and Windows under GPL
* part of the sndtools distribution.
i have the intention to make the PKGBUILD, but it has no ./configure and its default is to install on /usr/local/
# Contributor: Your Name <[email protected]>
pkgname=sndpeek
pkgver=1.3
pkgrel=1
pkgdesc="real-time audio visualization "
url="http://soundlab.cs.princeton.edu/software/sndpeek/"
arch=('i686' 'x86_64')
license=('GPL')
depends=(libsndfile)
provides=(sndpeek)
source=(http://soundlab.cs.princeton.edu/software/sndpeek/files/$pkgname-$pkgver.tgz)
md5sums=('0ad03fa135bf819fb5971fde015526b4')
build() {
cd $srcdir/$pkgname-$pkgver
./configure --prefix=/usr
make || return 1
make DESTDIR=$pkgdir install || return 1

well changed the PKGBUILD a little... but still got errors...
# Contributor: Leandro Chescotta <[email protected]>
pkgname=sndpeek
pkgver=1.3
pkgrel=1
pkgdesc="real-time audio visualization"
arch=('i686' 'x86_64')
url="http://soundlab.cs.princeton.edu/software/sndpeek/"
license=('GPL')
depends=('libsndfile')
source=(http://soundlab.cs.princeton.edu/software/sndpeek/files/$pkgname-$pkgver.tgz)
md5sums=('0ad03fa135bf819fb5971fde015526b4')
build() {
cd $srcdir/$pkgname-$pkgver/src/sndpeek
./configure --prefix=/usr
make linux-alsa || return 1
make DESTDIR=$pkgdir install || return 1
output:
[aleyscha@aleyscha 51 sndpeek 22:15]$ makepkg -f
==> Making package: sndpeek 1.3-1 i686 (Fri May 15 22:15:45 ART 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found sndpeek-1.3.tgz in build dir
==> Validating source files with md5sums...
sndpeek-1.3.tgz ... Passed
==> Extracting Sources...
-> bsdtar -x -f sndpeek-1.3.tgz
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
PKGBUILD: line 16: ./configure: No such file or directory
make -f makefile.alsa
make[1]: Entering directory `/home/aleyscha/bin/arch_packages/sndpeek/src/sndpeek-1.3/src/sndpeek'
gcc -D__LINUX_ALSA__ -D__LITTLE_ENDIAN__ -I../marsyas/ -O3 -c chuck_fft.c
gcc -D__LINUX_ALSA__ -D__LITTLE_ENDIAN__ -I../marsyas/ -O3 -c RtAudio.cpp
RtAudio.cpp: In member function 'void RtApi::openStream(int, int, int, int, RtAudioFormat, int, int*, int)':
RtAudio.cpp:234: error: 'sprintf' was not declared in this scope
RtAudio.cpp:239: error: 'sprintf' was not declared in this scope
RtAudio.cpp:244: error: 'sprintf' was not declared in this scope
RtAudio.cpp:250: error: 'sprintf' was not declared in this scope
RtAudio.cpp:257: error: 'sprintf' was not declared in this scope
RtAudio.cpp:339: error: 'sprintf' was not declared in this scope
RtAudio.cpp:341: error: 'sprintf' was not declared in this scope
RtAudio.cpp: In member function 'RtAudioDeviceInfo RtApi::getDeviceInfo(int)':
RtAudio.cpp:355: error: 'sprintf' was not declared in this scope
make[1]: *** [RtAudio.o] Error 1
make[1]: Leaving directory `/home/aleyscha/bin/arch_packages/sndpeek/src/sndpeek-1.3/src/sndpeek'
make: [linux-alsa] Error 2 (ignored)
cp /usr/local/bin/; chmod 755 /usr/local/bin/
cp: missing destination file operand after `/usr/local/bin/'
Try `cp --help' for more information.
==> Tidying install...
-> Compressing man pages...
-> Stripping debugging symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: sndpeek 1.3-1 i686 (Fri May 15 22:15:50 ART 2009)
Press any key to continue...
[aleyscha@aleyscha 52 sndpeek 22:15]$

ORACLE 11G "real time apply" not work?????

we have a database original on ORACLE 10.2.0.4 and we upgrade it to 11.1.0.7.
after that we create standby database and tried to use "real time apply" feature.
Primary database can transfer log files to standby database and standby database also can apply logs. The problem is it can NOT work on "real time apply".
Ant ideal what wrong?
=== procedures ====== (standby database)
SQL> startup mount;
ORACLE instance started.
Total System Global Area 2087780352 bytes
Fixed Size 2161272 bytes
Variable Size 1795163528 bytes
Database Buffers 251658240 bytes
Redo Buffers 38797312 bytes
Database mounted.
SQL> alter database open read only;
Database altered.
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select PROTECTION_MODE, PROTECTION_LEVEL, DATABASE_ROLE, SWITCHOVER_STATUS, OPEN_MODE, GUARD_STATUS from v$database;
PROTECTION_MODE PROTECTION_LEVEL DATABASE_ROLE SWITCHOVER_STATUS
OPEN_MODE GUARD_S
MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE PHYSICAL STANDBY NOT ALLOWED
MOUNTED NONE
SQL> select process, status from v$managed_standby;
PROCESS STATUS
ARCH CONNECTED
ARCH CONNECTED
ARCH CONNECTED
ARCH CONNECTED
RFS IDLE
MRP0 APPLYING_LOG
6 rows selected.
========== Primary database init.ora file setup =====
### for DG use
db_unique_name = DBPMY
log_archive_config='dg_config=(DBPMY,DBSBY)'
log_archive_dest_1='LOCATION=/Archive/DBPMY/arch/arch MANDATORY'
log_archive_dest_2='service=DBSBY valid_for=(online_logfiles,primary_role) db_unique_name=DBSBY LGWR ASYNC=20480 OPTIONAL REOPEN=15 NET_TIMEOUT=30'
*.log_archive_format='DBPMY_%r_%t_%s.arc'
log_archive_dest_state_1 = enable
log_archive_dest_state_2 = enable

There are a couple of things to look at.
1. Real time apply requires standby redo logs on the standby database. On the standby database run this query:
SELECT * FROM v$logfile where type = 'STANDBY';
if you get 0 rows back you'll need to create standby logfiles
The general guideline is to size them exactly like your redo logs but add one additional standby log to ensure it doesn't cause a bottleneck.
2. Get the size of your logfiles:
SELECT GROUP#, BYTES FROM V$LOG;
3. For example if you have 3 redo logs that are 50 MB in size, create 4 standby redo logs 50 MB each and don't multiplex them.
ALTER DATABASE ADD STANDBY LOGFILE ('/Archive/DBSBY/onlinelog/slog1.rdo') SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE ('/Archive/DBSBY/onlinelog/slog2.rdo') SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE ('/Archive/DBSBY/onlinelog/slog3.rdo') SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE ('/Archive/DBSBY/onlinelog/slog4.rdo') SIZE 50M;
4. Cancel recovery on standby
recover managed standby database cancel;
5. Restart recovery using real time apply
recover managed standby database using current logfile disconnect;
6. To validate that real time is working you can check a few places.
-It will say in the database alert log on standby that it's using real time apply
OR
-Check primary
SELECT status, recovery_mode FROM v$archive_dest_status where dest_name = 'LOG_ARCHIVE_DEST_2';
If the recovery_mode is "MANAGED REAL TIME APPLY" then real time apply is working, if it's anything else then we'll need to check more things.
NOTE that if you are going to allow your current primary to switch roles and become a standby then you'll want to create standby redo logs on primary as well
Sometimes recovery gets "stuck" and simply resetting the destination parameters can resolve it:
alter system set log_archive_dest_2='service=DBSBY valid_for=(online_logfiles,primary_role) db_unique_name=DBSBY LGWR ASYNC=20480 OPTIONAL REOPEN=15 NET_TIMEOUT=30';
There are some other things we can check next but let's start with the easiest fixes first.

Error in Real Time Collaboration

Hi
We got an issue in our project.
When ever any user log's into Portal it is giving a message called
With title Real-Time Collaboration(You are logged to the same portal already. Real-time collaboration capabilities will not be available in the current portal session until you terminate the other session and then restart this one by refreshing the browser or logging on again.)
We are using EP6 SP13
And we are having 2000 Portal users every one is getting this error in portal.
And After restarting the Server we are not getting that error. And again after a month it again starts.
Thanking you in advance for help
From
Srikanth

Hi Srikanth,
We also faced the same error and it was because the same users have already logged into the portal once or more than once.
The capabilities of real time collaboration feature might not work if an user has made multiple login to the portal using same id.
Hope the issue should be same with you.
With regards
Deepa
Plz reward points for helpful answers.

InDesign auto-size frame feature not working in real time in InCopy why?

We have just recently migrated from InCopy CS4 to CS6 to take advantage of the new features like the auto resize frame option, however it now seems that this feature is not working in real-time.
Basically the steps are needed to be complete before it auto-resizes the frame in InCopy, we use both layout and assignment based workflows:
1. From an ID document ('doc1'), exported a 'layer' to IC, certain frames are set to auto-size in height using the text frame options. So that editorial can review and make changes to text and the frame should resize according to the specifications set. IC stories are saved to a folder located in a content folder inside the top issue working folder.
2. Editorial opens the IC software, then opens the ID 'doc1'. Check’s out correct .icml file and makes edits to frame with auto resize.
3. Frame does not resize according to text frame set options and InCopy file does not respond in same fashion as InDesign.
4. Change only occurs when InCopy file is closed and updated in InDesign, which is frustrating as this feature would save huge amounts of time serving editorial requests.
Has anybody experienced this type of workflow problem? If anyone can provide mw with some pointers as to what can I do to get this to update in real time perhaps run a script? Update file in InCopy and refresh I will very much appreciate their assistance. I have run out of ideas.
Thanks!

We've had all sorts of problems with this feature as it should've worked straight out of the box but after some testing we have found that its something to do with the way you open the actual file in InCopy. Which is far from ideal and should have been UAT by Adobe before release.
This will not work consistently work if you open the designed .indd or .icma file in InCopy using the file open command within the application.
If you need this to work, the InCopy user has to open the .indd or .icma file by dragging and droping from OS windows explorer into InCopy, we use Windows 7 acrros all the teams. Check out .icml files add text changes to the set auto resized frames, this process will expand/collapse the frames to fit the content but as you have to use the drag and drop method to open the .indd and .icma file, 2 users cannot access the same time doc at the same time (a serious flaw in the programming architecture!) which stops people working in parallel. Save changes, check in .icml content and close .indd or .icma.
However the flaw comes in if you then open the .indd and .icma file in InCopy using the file open command within the application, before an InDesign user opens and saves the file (updates the design). The corrections added in the previous stage above, will not show the frames expanded/collapsed to take in the added text and instead show over matter???? The only way around this is to ask an InDesign user to open, update and save the design that way the InCopy user will see the same result no matter what file open method they use.
Another suggestion is to design the page to have some of the auto resize frames anchored within main body of text and that way the frames will expland/collapse when checking out and editing the content. However, this does cause issues with InDesign crashing etc. so we have tried to stop this method within the working group.
Have you experienced other more serious issues with InDesign crashing consistently when re-importing .icml files? See other forums here:
http://forums.adobe.com/thread/671820?start=80&tstart=0
http://forums.adobe.com/message/5045608#5045608
As far as we can see this is a major flaw in how the application(s) work, we have an enterprise agreement with Adobe and purchase a large volume of Adobe products globally but so far the technical support team are unable to find a solution to this and I'm not hopeful of any resolution soon even with the new release of Adobe CC.

Does not let me add text to my verizon website. This adding text feature works well on internet explorer. I can click on add text, the box opens up but I can not type in the box for some unknown reason. What can be done to correct this problem ...

does not let me add text to my verizon website. This adding text feature works well on internet explorer. I can click on add text, the box opens up but I can not type in the box for some unknown reason. What can be done to correct this problem ...

I didn't search before, but "you are not alone" (the thread [https://support.mozilla.com/en-US/questions/747424 In Verizon's Sitebuilder for webpages, I can not edit text boxes when using Firefox. I do not have this problem if I use Internet Explorer. Is there a setting I can change in Firefox to correct this problem?] has 18 votes for "I have this problem, too).
I can only guess about the reason... Firefox works with many websites' "rich text" editors, but ones that haven't been updated for five years may assume that Firefox is the old Netscape browser and use scripting techniques that don't work in Firefox.
If Verizon has a different "basic" or HTML editor that you can tolerate using, you could try that. It might not be subject to the same incompatibilities.
If I someday get a Verizon account, I will surely be looking into this further, but for now, it's hard to suggest anything else.

How do I monitor in real time my teen's text messages?

How do I monitor in real time my teen's text messages?

I have just started using TeenSafe.com. I like that it monitors even deleted messages but it only updates while phone is being recharged. And I haven't figured out yet if it picks up iMessages. I can get location in real time which is helpful.

Adding Real-time projects with login.

Our system is LDAP'd, and I was wondering if there was a way to configure it such that upon successful login, an entry is created in the projects file that has users name and will update their rules.

It sounds like I need to learn about charts and graphs. Any articles that I can read on how to understand the Labview way of doing it?
This what I understand about charts ... the time base is free running and when a data point is fed into it, it is printed on the chart display.
the free running time base can be referenced to the referenced real time clock of the system at time zero.
Attached is an example of using the real time clock to set the offset and using the choices in the property menu as I understand it.
Absolute and relative choices have no use from what I can see.
I still digesting the info provided by you and Ken on charts and graphs.
Is there a guide with more detail and setup (How to)info than the Help files provide?
I am still learning the vocabulary , that is slowing me down in the search for a solution.
In a nutshell,
I am reading downhole gauges (4-20mA) from a DGH module via RS485.
The readings are converted to pressure and temps and display on a strip chart.
One of the requirements is that gauge values on the chart need to be referenced to time not just a free running reference of tick marks.
thanks for everyone's help on this.
Attachments:
X time display.vi ‏19 KB

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
   1. Simple Report
   2. Block Report
   3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva

Capture all SQL statements and archive to file in real time

Want to Capture all SQL statements and archive to file in real time?
Oracle Session Manager is the tool just you need.
Get it at http://www.wangz.net
This tools monitor how connected sessions use database instance resources in real time. You can obtain an overview of session activity sorted by a statistic of your choosing. For any given session, you can then drill down for more detail. You can further customize the information you display by specifying manual or automatic data refresh, the rate of automatic refresh.
In addition to these useful monitoring capabilities, OSM allows you to send LAN pop-up message to users of Oracle sessions.
Features:
--Capture all SQL statement text and archive to files in real time
--Pinpoints problematic database sessions and displays detailed performance and resource consumption data.
--Dynamically list sessions holding locks and other sessions who are waiting for.
--Support to kill several selected sessions
--Send LAN pop-up message to users of Oracle sessions
--Gives hit/miss ratio for library cache,dictionary cache and buffer cache periodically,helps to tune memory
--Export necessary data into file
--Modify the dynamic system parameters on the fly
--Syntax highlight for SQL statements
--An overview of your current connected instance informaiton,such as Version, SGA,License,etc
--Find out object according to File Id and Block Id
Gudu Software
http://www.wangz.net

AnkitV wrote:
Hi All
I have 3 statements and I am writing some thing to a file using UTL_FILE.PUT_LINE after each statement is over. Each statement takes mentioned time to complete.
I am opening file in append mode.
statement1 (takes 2 mins)
UTL_FILE.PUT_LINE
statement2 (takes 5 mins)
UTL_FILE.PUT_LINE
statement3 (takes 10 mins)
UTL_FILE.PUT_LINE
I noticed that I am able to see contents written by UTL_FILE.PUT_LINE only after statement3 is over, not IMMEDIATELY after statement1 and statement2 are done ?
Can anybody tell me if this is correct behavior or am I missing something here ?Calling procedure must terminate before data is actually written to the file.
It is expected & correct behavior.

Abap-hr real time questions

hi friends
kindly send me ABAP-HR REAL TIME QUESTION to my mail [email protected]
Thanks&Regards
babasish

Hi
Logical database
A logical database is a special ABAP/4 program which combines the contents of certain database tables. Using logical databases facilitates the process of reading database tables.
HR Logical Database is PNP
Main Functions of the logical database PNP:
Standard Selection screen
Data Retrieval
Authorization check
To use logical database PNP in your program, specify in your program attributes.
Standard Selection Screen
Date selection
Date selection delimits the time period for which data is evaluated. GET PERNR retrieves all records of the relevant infotypes from the database. When you enter a date selection period, the PROVIDE loop retrieves the infotype records whose validity period overlaps with at least one day of this period.
Person selection
Person selection is the 'true' selection of choosing a group of employees for whom the report is to run.
Sorting Data
· The standard sort sequence lists personnel numbers in ascending order.
· SORT function allows you to sort the report data otherwise. All the sorting fields are from infotype 0001.
Report Class
· You can suppress input fields which are not used on the selection screen by assigning a report class to your program.
· If SAP standard delivered report classes do not satisfy your requirements, you can create your own report class through the IMG.
Data Retrieval from LDB
1. Create data structures for infotypes.
    INFOTYPES: 0001, "ORG ASSIGNMENT
                        0002, "PERSONAL DATA
                        0008. "BASIC PAY
2. Fill data structures with the infotype records.
    Start-of-selection.
         GET PERNR.
    End-0f-selection.
    Read Master Data
Infotype structures (after GET PERNR) are internal tables loaded with data.
The infotype records (selected within the period) are processed sequentially by the PROVIDE - ENDPROVIDE loop.
          GET PERNR.
             PROVIDE * FROM Pnnnn BETWEEN PN/BEGDA AND PN/ENDDA
                    If Pnnnn-XXXX = ' '. write:/ Pnnnn-XXXX. endif.
             ENDPROVIDE.
Period-Related Data
All infotype records are time stamped.
IT0006 (Address infotype)
01/01/1990   12/31/9999 present
          Which record to be read depends on the date selection period specified on the
          selection screen. PN/BEGDA PN/ENDDA.
Current Data
IT0006 Address - 01/01/1990 12/31/9999   present
RP-PROVIDE-FROM-LAST retrieves the record which is valid in the data selection period.
For example, pn/begda = '19990931'    pn/endda = '99991231'
IT0006 subtype 1 is resident address
RP-PROVIDE-FROM-LAST P0006 1 PN/BEGDA PN/ENDDA.
Process Infotypes
RMAC Modules - RMAC module as referred to Macro, is a special construct of ABAP/4 codes. Normally, the program code of these modules is stored in table 'TRMAC'. The table key combines the program code under a given name. It can also be defined in programs.The RMAC defined in the TRMAC can be used in all Reports. When an RMAC is changed, the report has to be regenerated manually to reflect the change.
Reading Infotypes - by using RMAC (macro) RP-READ-INFOTYPE
          REPORT ZHR00001.
          INFOTYPE: 0002.
          PARAMETERS: PERNR LIKE P0002-PERNR.
          RP-READ-INFOTYPE PERNR 0002 P0002 .
          PROVIDE * FROM P0002
              if ... then ...endif.
          ENDPROVIDE.
Changing Infotypes - by using RMAC (macro) RP-READ-INFOTYPE.
· Three steps are involved in changing infotypes:
1. Select the infotype records to be changed;
2. Make the required changes and store the records in an alternative table;
3. Save this table to the database;
The RP-UPDATE macro updates the database. The parameters of this macro are the OLD internal table containing the unchanged records and the NEW internal table containing the changed records. You cannot create or delete data. Only modification is possible.
INFOTYPES: Pnnnn NAME OLD,
Pnnnn NAME NEW.
GET PERNR.
    PROVIDE * FROM OLD
           WHERE .... = ... "Change old record
           *Save old record in alternate table
           NEW = OLD.
    ENDPROVIDE.
    RP-UPDATE OLD NEW. "Update changed record
Infotype with repeat structures
· How to identify repeat structures.
a. On infotype entry screen, data is entered in table form.
    IT0005, IT0008, IT0041, etc.
b. In the infotype structure, fields are grouped by the same name followed by sequence number.
    P0005-UARnn P0005-UANnn P0005-UBEnn
    P0005-UENnn P0005-UABnn
Repeat Structures
· Data is entered on the infotype screen in table format but stored on the database in a linear
structure.
· Each row of the table is stored in the same record on the database.
· When evaluating a repeat structure, you must define the starting point, the increment and the
work area which contains the complete field group definition.
Repeat Structures Evaluation (I)
· To evaluate the repeat structures
   a. Define work area.
       The work area is a field string. Its structure is identical to that of the field group.
   b. Use a DO LOOP to divide the repeat structure into segments and make it available for
       processing in the work area, one field group (block) at a time.
Repeat Structures Evaluation(II)
Define work area
DATA: BEGIN OF VACATION,
              UAR LIKE P0005-UAR01, "Leave type
              UAN LIKE P0005-UAN01, "Leave entitlement
              UBE LIKE P0005-UBE01, "Start date
              UEN LIKE P0005-UEN01, "End date
              UAB LIKE P0005-UAB01, "Leave accounted
           END OF VACATION.
GET PERNR.
     RP-PROVIDE-FROM-LAST P0005 SPACE PN/BEGDA PN/ENDDA.
     DO 6 TIMES VARYING VACATION
             FROM P0005-UAR01 "Starting point
                 NEXT P0005-UAR02. "Increment
             If p0005-xyz then ... endif.
      ENDDO.
Processing 'Time Data'.
· Dependence of time data on validity period
· Importing time data
· Processing time data using internal tables
Time Data and Validity Period
· Time data always applies to a specific validity period.
· The validity periods of different types of time data are not always the same as the date selection period specified in the selection screen.
Date selection period |----
|
Leave |----
|
· PROVIDE in this case is therefore not used for time infotypes.
Importing Time Data
· GET PERNR reads all time infotypes from the lowest to highest system data, not only those within the date selection period.
· To prevent memory overload, add MODE N to the infotype declaration. This prevents the logical database from importing all data into infotype tables at GET PERNR.
· Use macro RP-READ-ALL-TIME-ITY to fill infotype table.
INFOTYPES: 2001 MODE N.
GET PERNR.
    RP-READ-ALL-TIME-ITY PN/BEGDA PN/ENDDA.
    LOOP AT P0021.
         If P0021-XYZ = ' '. A=B. Endif.
    ENDLOOP.
Processing Time Data
· Once data is imported into infotype tables, you can use an internal table to process the interested data.
DATA: BEGIN OF ITAB OCCURS 0,
              BUKRS LIKE P0001-BUKRS, "COMPANY
              WERKS LIKE P0001-WERKS, "PERSONNEL AREA
              AWART LIKE P2001-AWART, "ABS./ATTEND. TYPE
              ASWTG LIKE P2001-ASWTG, "ABS./ATTEND. DAYS
           END OF ITAB.
GET PERNR.
RP-PROVIDE-FROM-LAST P0001 SAPCE PN/BEGDA PN/ENDDA.
CLEAR ITAB.
ITAB-BUKRS = P0001-BURKS. ITAB-WERKS = P0001-WERKS.
RP-READ-ALL-TIME-ITY PN/BEGDA PN/ENDDA.
LOOP AT P2001.
      ITAB-AWART = P2001-AWART. ITAB-ASWTG = P2001-ASWTG.
      COLLECT ITAB. (OR: APPEND ITAB.)
ENDLOOP.
Database Tables in HR
· Personnel Administration (PA) - master and time data infotype tables (transparent tables).
   PAnnnn: e.g. PA0001 for infotype 0001
· Personnel Development (PD) - Org Unit, Job, Position, etc. (transparent tables).
   HRPnnnn: e.g. HRP1000 for infotype 1000
· Time/Travel expense/Payroll/Applicant Tracking data/HR work areas/Documents (cluster
   PCLn: e.g. PCL2 for time/payroll results.
Cluster Table
· Cluster tables combine the data from several tables with identical (or almost identical) keys
into one physical record on the database.
. Data is written to a database in compressed form.
· Retrieval of data is very fast if the primary key is known.
· Cluster tables are defined in the data dictionary as transparent tables.
· External programs can NOT interpret the data in a cluster table.
· Special language elements EXPORT TO DATABASE, IMPORT TO DATABASE and DELETE
FROM DATABASE are used to process data in the cluster tables.
PCL1 - Database for HR work area;
PCL2 - Accounting Results (time, travel expense and payroll);
PCL3 - Applicant tracking data;
PCL4 - Documents, Payroll year-end Tax data
Database Tables PCLn
· PCLn database tables are divided into subareas known as data clusters.
· Data Clusters are identified by a two-character code. e.g RU for US payroll result, B2 for
time evaluation result...
· Each HR subarea has its own cluster.
· Each subarea has its own key.
Database Table PCL1
· The database table PCL1 contains the following data areas:
B1 time events/PDC
G1 group incentive wages
L1 individual incentive wages
PC personal calendar
TE travel expenses/payroll results
TS travel expenses/master data
TX infotype texts
ZI PDC interface -> cost account
Database Table PCL2
· The database table PCL2 contains the following data areas:
B2 time accounting results
CD cluster directory of the CD manager
PS generated schemas
PT texts for generated schemas
RX payroll accounting results/international
Rn payroll accounting results/country-specific ( n = HR country indicator )
ZL personal work schedule
Database Table PCL3
· The database table PCL3 contains the following data areas:
AP action log / time schedule
TY texts for applicant data infotypes
Data Management of PCLn
· The ABAP commands IMPORT and EXPORT are used for management of read/write to
database tables PCLn.
· A unique key has to be used when reading data from or writing data to the PCLn.
Field Name KEY Length Text
MANDT X 3 Client
RELID X 2 Relation ID (RU,B2..)
SRTFD X 40 Work Area Key
SRTF2 X 4 Sort key for dup. key
Cluster Definition
· The data definition of a work area for PCLn is specified in separate programs which comply
   with fixed naming conventions.
· They are defined as INCLUDE programs (RPCnxxy0). The following naming convention applies:
   n = 1 or 2 (PCL1 or PCL2)
   xx = Relation ID (e.g. RX)
   y = 0 for international clusters or country indicator (T500L) for different country cluster
Exporting Data (I)
· The EXPORT command causes one or more 'xy' KEY data objects to be written to cluster xy.
· The cluster definition is integrated with the INCLUDE statement.
REPORT ZHREXPRT.
TABLES: PCLn.
INCLUDE: RPCnxxy0. "Cluster definition
Fill cluster KEY
xy-key-field = .
Fill data object
Export record
EXPORT TABLE1 TO DATABASE PCLn(xy) ID xy-KEY.
   IF SY-SUBRC EQ 0.
       WRITE: / 'Update successful'.
   ENDIF.
Exporting Data (II)
. Export data using macro RP-EXP-Cn-xy.
· When data records are exported using macro, they are not written to the database but to a
main memory buffer.
· To save data, use the PREPARE_UPDATE routine with the USING parameter 'V'.
REPORT ZHREXPRT.
*Buffer definition
INCLUDE RPPPXD00. INCLUDE RPPPXM00. "Buffer management
DATA: BEGIN OF COMMON PART 'BUFFER'.
INCLUDE RPPPXD10.
DATA: END OF COMMON PART 'BUFFER'.
RP-EXP-Cn-xy.
IF SY-SUBRC EQ 0.
    PERFORM PREPARE_UPDATE USING 'V'..
ENDIF.
Importing Data (I)
· The IMPORT command causes data objects with the specified key values to be read from
   PCLn.
· If the import is successful, SY-SUBRC is 0; if not, it is 4.
REPORT RPIMPORT.
TABLES: PCLn.
INCLUDE RPCnxxy0. "Cluster definition
Fill cluster Key
Import record
IMPORT TABLE1 FROM DATABASE PCLn(xy) ID xy-KEY.
   IF SY-SUBRC EQ 0.
Display data object
   ENDIF.
Importing data (II)
· Import data using macro RP-IMP-Cn-xy.
· Check return code SY-SUBRC. If 0, it is successful. If 4, error.
· Need include buffer management routines RPPPXM00
REPORT RPIMPORT.
*Buffer definition
INCLUDE RPPPXD00.
DATA: BEGIN OF COMMON PART 'BUFFER'.
INCLUDE RPPPXD10.
DATA: END OF COMMON PART 'BUFFER'.
*import data to buffer
RP-IMP-Cn-xy.
*Buffer management routines
INCLUDE RPPPXM00.
Cluster Authorization
· Simple EXPORT/IMPORT statement does not check for cluster authorization.
· Use EXPORT/IMPORT via buffer, the buffer management routines check for cluster
authorization.
Payroll Results (I)
· Payroll results are stored in cluster Rn of PCL2 as field string and internal tables.
n - country identifier.
· Standard reports read the results from cluster Rn. Report RPCLSTRn lists all payroll results;
report RPCEDTn0 lists the results on a payroll form.
Payroll Results (II)
· The cluster definition of payroll results is stored in two INLCUDE reports:
include: rpc2rx09. "Definition Cluster Ru (I)
include: rpc2ruu0. "Definition Cluster Ru (II)
The first INCLUDE defines the country-independent part; The second INCLUDE defines the country-specific part (US).
· The cluster key is stored in the field string RX-KEY.
Payroll Results (III)
· All the field string and internal tables stored in PCL2 are defined in the ABAP/4 dictionary. This
allows you to use the same structures in different definitions and nonetheless maintain data
consistency.
· The structures for cluster definition comply with the name convention PCnnn. Unfortunately,
   'nnn' can be any set of alphanumeric characters.
*Key definition
DATA: BEGIN OF RX-KEY.
     INCLUDE STRUCTURE PC200.
DATA: END OF RX-KEY.
*Payroll directory
DATA: BEGIN OF RGDIR OCCURS 100.
     INCLUDE STRUCTURE PC261.
DATA: END OF RGDIR.
Payroll Cluster Directory
· To read payroll results, you need two keys: pernr and seqno
. You can get SEQNO by importing the cluster directory (CD) first.
REPORT ZHRIMPRT.
TABLES: PERNR, PCL1, PCL2.
INLCUDE: rpc2cd09. "definition cluster CD
PARAMETERS: PERSON LIKE PERNR-PERNR.
RP-INIT-BUFFER.
*Import cluster Directory
   CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
   CHECK SY-SUBRC = 0.
LOOP AT RGDIR.
   RX-KEY-PERNR = PERSON.
   UNPACK RGDIR-SEQNR TO RX-KEY-SEQNO.
   *Import data from PCL2
   RP-IMP-C2-RU.
   INLCUDE: RPPPXM00. "PCL1/PCL2 BUFFER HANDLING
Function Module (I)
CD_EVALUATION_PERIODS
· After importing the payroll directory, which record to read is up to the programmer.
· Each payroll result has a status.
'P' - previous result
'A' - current (actual) result
'O' - old result
· Function module CD_EVALUATION_PERIODS will restore the payroll result status for a period
   when that payroll is initially run. It also will select all the relevant periods to be evaluated.
Function Module (II)
CD_EVALUATION_PERIODS
call function 'CD_EVALUATION_PERIODS'
     exporting
          bonus_date = ref_periods-bondt
          inper_modif = pn-permo
          inper = ref_periods-inper
          pay_type = ref_periods-payty
          pay_ident = ref_periods-payid
     tables
          rgdir = rgdir
          evpdir = evp
          iabkrs = pnpabkrs
     exceptions
          no_record_found = 1.
Authorization Check
   Authorization for Persons
· In the authorization check for persons, the system determines whether the user has the
   authorizations required for the organizational features of the employees selected with
   GET PERNR.
· Employees for which the user has no authorization are skipped and appear in a list at the end
   of the report.
· Authorization object: 'HR: Master data'
Authorization for Data
· In the authorization check for data, the system determines whether the user is authorized to
read the infotypes specified in the report.
· If the authorization for a particular infotype is missing, the evaluation is terminated and an error
message is displayed.
Deactivating the Authorization Check
· In certain reports, it may be useful to deactivate the authorization check in order to improve
performance. (e.g. when running payroll)
· You can store this information in the object 'HR: Reporting'.
these are the main areas they ask q?

PS CS6: stroke color picker preview in real time not working

re: NEW color picker stroke color not updating in real time (previewing).
Is it me or has the stroke color preview been removed in CS6 or is there a setting that needs to be changed to enable it?
The problem: When I create a shape layer, press enter and then chose a stroke color from the color picker, I select a color but it doesnt update the stroke color until I press enter. I'm sure it used to change in real time as you clicked on the color picker panel before accepting it.
Any sugestions or ideas as to whats going on or am I going mad?
Further update: This is when creating a shape but using the new stroke feature in the properties bar at the top (the one which gives you the new fancy options like having a dashed, transparent or gradiented stroke) and not the traditional method of adding it as an effect. This still shows a real time update, but the new method doesnt.

Curt Y wrote:
zarrdave wrote:
You're then moving the colour picker dialogue box to one side so you can see he shape created, and you've then tried clicking on different colours and the border color has changed after each click (but before you press OK)?
If thats working so the color changes in real time for you, then unfortunatley I've got a problem with my version.
Using Win7 CS6 extended, and following your instructions it works for me.
Border changes withn I click on color pallet with color picker.
Odd, same version/ O.S. here, thanks for that though Curt Y. Are you sure you're not clicking on the preset colours and actually using the color picker dialogue box.
I've been in a bit of a rush here at the office and appologise for not being clearer and posting a screencap earlier.
To clarify, its the Cyan dialogue box not the orange box I'm talking about (nice choice of colours I know ). The top right icon in the organge box with the colours in is how you get to it.

Is this possible in AS3????? AS3 commercial application with speech, avatar real-time animation and innovative GUI

Hi,
Check out this awesome AS3 application from Umanify:
http://www.icex.es/icex/cda/views_icexv3/asistenteVoz/asistenteVoz/0,6457,,00.html
You can drag&drop the GUI of the assistant on the web
page with the mouse...they are using transparent layers...and the
avatar animation is lipsync with the speech....even they can copy
and paste text from the web page and read it aloud with "lee"
button...
are those features possible in real-time with AS3??????
how???

Hi,
Check out this awesome AS3 application from Umanify:
http://www.icex.es/icex/cda/views_icexv3/asistenteVoz/asistenteVoz/0,6457,,00.html
You can drag&drop the GUI of the assistant on the web
page with the mouse...they are using transparent layers...and the
avatar animation is lipsync with the speech....even they can copy
and paste text from the web page and read it aloud with "lee"
button...
are those features possible in real-time with AS3??????
how???

Real Time Communication

HI Gurus,
Can any one tell me what is REAL TIME COMMUNICATION.
Also I request information / details on RTCIS.
Regards
Ajoy

Hi Ajoy,
1.1 Application Scenarios for Real Time Communications
There are two classes of applications: client and server. Client class applications have one real-time client per computer, such as the traditional instant messenger (IM) application. Server class applications typically act on behalf of multiple users or communicate with many hundreds of users simultaneously. Server class applications are often based around intelligent applications that interact with users. These applications can be divided into two categories: notification Apps that send information to a client and interactive Apps that accept and respond to a client. A third type of server class applications, Web-based clients, interacts with users through a Web server.
1.2 Notification Applications
Notification Apps are real-time applications that send information to multiple clients from a centralized server (see Figure 1). The one-way transmission means that clients cannot communicate directly with the notification App. Instead, clients must choose which events they wish to receive by using some other technique, such as a Web application.
One example of a notification App is an application that notifies all of the users of a particular e-mail server that the server is about to go offline. Another useful notification App would send alerts in cases of severe weather.
1.3 Interactive Apps
Interactive Apps are applications that allow multiple clients to communicate with a central server in real-time, as Figure 2 shows. They are different from notification bots in that interactive bots support two-way communications with a client. Using this approach, you can build an application that interacts with users in real-time. Within this scenario, there are two main sub-scenarios. The first provides a user with information and waits for the user to respond, such as an application that notifies users about changes in stock prices and then gives the user the option to buy or sell. The second waits for the user to request a session with the App and then responds to requests that the user supplies, such as a calendar application that allows a user to schedule meetings and other events while receiving reminders just prior to the meeting or event.
1.4 Web-Based Clients
Web-based clients provide the same basic functionality as the traditional IM client through a Web interface, thus allowing the widest possible audience to use the application, as Figure 3 illustrates. It also has the side effect of eliminating the need for a user to download local software, which reduces user concerns about the download containing a potential virus. These types of clients are useful to organizations that wish to provide a Web-based front end to their internal IM system. For example, a company might wish to use a Web-based IM client to connect customers with a support group. Doing so maximizes the number of customers that can connect with the support group.
Real Time Communications Data Flow
It's critical that organizations planning large deployments of real-time communications applications ensure that those applications can scale to meet the desired goals. The RTC Client API is very efficient for client class applications for which each client runs on its own computer. To build a scalable RTC Client API application that services multiple clients with a single computer, you need to ensure that the application is scalable when you design it.
The Real-time Communications (RTC) Client API is a set of COM interfaces and methods designed to create PC-PC, PC-phone, phone-phone audio/video calls, or text-only Instant Messaging (IM) sessions over the Internet. Application sharing and whiteboard (An application that displays a window for two users to exchange information) can also be added to PC-PC sessions. Presence information is used to track the location of buddies (or contacts) for communication purposes. This information is available through the RTC Client API on a SIP registrar server.
The RTC Client API:
1.Supports multiparty phone-phone calls
2.Uses SIP-based signaling and presence communications
3.Integrates with the Microsoft Office RTC proxy and registrar server
4.Supports provisioning with ITSPs or third-party corporate-deployed servers
5.Integrates signals over IP and PSTN networks
I hope this will be useful for you.
Thanks,
Swamy Kunche

11gR2 Real Time Apply / open read only

Hi,
I have a single instance primary database with a physical standby. The release is 11.2.0.1.0.
Max Availability mode
LGWR SYNC transport
Data Guard Broker configuration enabled
Both the primary and standby database are registered with the Grid Infrastructure (Standalone installation on each server, no cluster)
When I stop and start the standby database it seems to default to open read only using Managed Real Time Recovery.
SQL> SELECT DEST_ID, RECOVERY_MODE FROM V$ARCHIVE_DEST_STATUS
2> WHERE DEST_ID=2;
DEST_ID RECOVERY_MODE
2 MANAGED REAL TIME APPLY
I do not want to Active Data Guard on this particular database. So I removed and added the database again using srvctl this time supplying the -s mount flag. Now when I stop/start the standby it opens in mount mode and MANAGED recovery which is OK.
My question is why did the standby automatically get opened in read only. Is the a change in behaviour introduced along with Active Data Guard? Is the default behaviour for a database registered with Grid Infrastructure to simply start the database in open mode and becuase this is 11.2 standby this means open read only?
Thanks

Dear user234564,
This has been introduced in Oracle Database 11g Data Guard New Features and it is called the Active Data Guard. With the new release you can open the physical standby database in read only mode and the real time apply will continue as it is on the mount stage. This ability has not been granted on 10g. So i think it could be the normal behaviour.
11g physical standby database will be opened and the MRP process will still apply the archivelogs to the standby database. You can simply have it tested.
Please refer;
http://download.oracle.com/docs/cd/E11882_01/server.112/e10700/manage_ps.htm#CHDGJEFF
Let me give you a quick hint but it is off topic;
The number of standby databases that a primary database can support is increased from 9 to 30 in this release.
The capability to create 30 standby databases, combined with the functionality of the Oracle Active Data Guard option, allows the creation of reader farms that can be used to offload large scale read-only workloads from a production database.Hope That Helps.
Ogan

Real time Text feature added

Similar Messages

Maybe you are looking for