Really weird Network errors with AD after create actions with IdM 5.5

I am struggling with the AD after actions.
Customers AD support insist that the Gateway is not installed on any domain controller or fileserver in the AD forrest. The customer would like the homeDirectory and share to be created on the fileserver at the same time as the account is created on the domain controller.
The GW service is started as the domain admin - logon account is test\Administrator not the default "localsystem"
I map the gateway's local drive Z: to c$ of the fileserver. net use from command prompt shows its status is OK.
I can net use and any other net command ok from command line. Commands like:
md z:\data\home
rmtshare \\fileserver\c:\data\home\....etc etc...
succeed even when driven from within the gateway C++ program. However, when the DOS command 'net use' is run by the gateway then when I examine the log, I see the response block:
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): <?xml version='1.0' encoding='UTF-16'?>
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): <Response>
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): <Result status='ok'>
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): <ResultItem type='ACTION_RC'>
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): <object class='String'>0</object> </ResultItem>
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): <ResultItem type='ACTION_STDOUT'>
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): <object class='String'>The command completed successfully.
Are you sure (Y/N)?processed dir: z:\data\home\stmgzea
processed dir: z:\data\home\stmgzea\data
</object> </ResultItem>
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): <ResultItem type='ACTION_STDERR'>
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): <object class='String'>System error 1222 has occurred.

The network is not present or not started.

System error 1222 has occurred.

The network is not present or not started.

</object> </ResultItem>
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): </Result>
04/07/2006 11.54.01.550000 [5824] (../../../../src/wps/agent/object/RequestHandler.cpp,66): </Response>
The net use command gives me error 1222 - no network present.
If anyone has successfully created remote directories and shares from the after action could you let me know what special WINS DNS permissions are needed.

Got that but still having problems with the customer test setup.
In our test AD environment we have 2 machines: the DC named anchor.dog.ad3.palm and a workstation named steam.dog.ad3.palm
The workstation has the gateway service and it runs under the account dog\Administrator the domain admin.
Ok. I can issue these commands via this <act> </act> block quite ok in our test environment.
set >> c:\capture.log
net use >> c:\capture.log
md F:\data\home\username\data
rmtshare.exe \\anchor.dog.ad3.palm\username$=c:\data\home\username /GRANT everyone:F
cacls F:\data\home\username /T /G dog\username:C builtin\administrators:F < c:\yes.txt
I can see things go aok at home. Where local disk Z: is mapped to \\anchor.dog.ad3.palm\c$
At customer they have a VMware setup for testing. The AD dc is one virtual machine and the GW is on a second virtual machine. domain there is test.local.
If I type the md and rmtshare and cacls in the GW dos command prompt window they succeed, but when run via the gateway the net use command shows Z: as Unavailable.
Has anyone met this problem before?
Its a messy situation here as the customer has outsourced their AD admin... these people insist on the GW not being on any DC. In their view since it works from command line there is no problem with the AD setup.

Similar Messages

Really weird quicktime error - showing stuff beneath it?

I'm getting a really weird quicktime error like something I've never seen before. It's been happening for a few weeks now I guess, but I don't recall quite when it began.
Basically, almost any video I open in it ends up splicing into fragments. The audio works fine, but the video shows part of the video, then part of the windows behind it, then the desktop, then the video, and cycling back again and splicing through.
I'm up to date on everything and I ran disk permissions and I can't figure out what's going on. It's definitely quicktime though - it's affecting my iTunes and my Finder video previews as well, across a whole range of codecs. It doesn't affect VLC or mPlayer.
Any idea what to do?

A&I reinstalls the OS over the existing OS (to the version on your install DVD that came with the MacBook) but leaves user files and installed applications intact. You should still do a clone on an external drive first though. Or at least backup all your data files.
After A&I you then use the downloadable combo updater for OSX and the latest QT for QT, and then after reboot repair permissions. You can then run Software Update for the other updates like iLife etc.
If your install DVD was for 10.4.X and you are not on 10.5 then don't use the original DVD use the 10.5 retail disk instead.

A network error occurred while trying to communicate with the server.

Hello All,
I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
In console I'm seeing these errors when I try to access various services:
2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
"<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

Bug report: Naming a Bin after creating it with drag'n'drop

There seems to be a small bug when giving a newly created bin a name after creating it by drag'n'drop of several clips onto the "New Bin" icon.
To reproduce:
Select some clips in your project browser
Drag them onto the New Bin button
A new bin is created with the clips in it
- the bin name for it appears to be selected, and editable - just as if you had created a new empty bin by clicking the New Bin button
- type in a new name - it accepts the name fine, now press enter.
- your new name disappears, and *now* you are really in the mode to edit the bin name
- type your name again, and it works.
Work around:
When creating new bins by using drag'n'drop of clips onto the New Bin button, first press enter once to enter into the proper edit mode before giving the bin a new name.
(is there a better place to file bug reports?)
Version 6.0.1 (014 (MC: 264587))
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache (per core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MP51.007F.B03
SMC Version (system):          1.39f11
SMC Version (processor tray):          1.39f11
OS X 10.6.8

Er, just answered my question about bug reports by reading the "read this before posting" link above
But I'll leave this here for the work-around in case anyone else needs it.

Error using BAPI_PO_CREATE1 for creating PO with services

Hi,
I'm getting an error saying 'EnTER account assignment data for item' when I use BAPI_PO_CREATE1 and try to create POs with Service Items. I have filled all the required details, even then the system throws up this error message. Thanks for any help.
Regards,
Vijay

what have you passed to the table POACCOUNT? and POACCOUNTX?
Regards,
Ravi

Feedback after the error in SWEL after creating the PO

Hi!
After creating the PO, it says in SWEL.. "Feedback after error" . When I double clicked it, it said that the EVENT releasestepcreated, Import container contains errors (are any obligatory elements missing?)
What could be the possible error in this?
Thanks so much,
Paula

Hi Paula,
Please check your binding from event to workflow.
You might have missed to export the event parameters to WF.
Please check the same in SWDD-> start events.
Thanks and Regards,
Swaminathan

Error in ASKB after creating parallel & delta depreciation area

Hi All,
We have APC and depreciation values in Area 1 for an Asset. Now I have created parallel depreciation area 70 and delta depreciation area 90. area 70 posting to parallel ledger. As soon as I created area 90, the following values are showing in AW01N
01 - Dep Area
APC - $45000
Depreciation - 1500
70 - Depr Area
APC - Null
Depreciation - Null
90 - Dep Area
APC - $45000
Depreciation - 1500
So when I run ASKB it gives me an error saying 'Balancing field in Profit center in line item 001 not filled'. The ledger group it is trying to post is the non-leading ledger.
Can you please help.

Hi Murali & Vinod,
Thanks for your replies. The document splitting settings are fine. It was the issue corss-system depreciation are settings. The client had activated area 70 for an Asset in one company code, but did not have it in the transferred Asset in the other company code. It was an intercompany transfer. We fixed this activating area 70 and now it is ok.
Now the problem is after I run ASKB, and check ABST2, the reconciliation report shows a line item with
Account : 1XXXXXX (Accum. Depr A/c)
Ledger : 3G (non leading ledger)
Period : 999
2ndLCGL :example 1000
2ndLC in AA: 0
2ndLC Delta : 1000
3rdLCGL :example 1000
3rdLC in AA: 0
3rdLC Delta : 1000
Leading ledger postings reconcile properly. Non leading ledger APC values in all 3 currencies reconcile properly. Only for Depr A/c in non-leading ledger it is not posting to LC2 and LC3.
Any thoughts?
Regards
Panneer

Error message R8281 after creating generic datasource

Hi Guys,
I created a datasource, and when i go to RSA6 and run a check it gives me an error message: R8281 . Does anyone know how i can rectify this?
Thanks

Hi, this is what i got in the error Log: can anyone tell me how to resolve this please?
You tried to assign a DataSource to the application component NEW_HIER_ROOT. This application component is, however, not entered in the RODSAPPL table as an application component
System response
The DataSource is saved, but is not visible in BW under the node NODESNOTCONNECTED.
Procedure
You do not have the option yet to transfer the application component hierarchy from the Content.
You transfer the hierarchy with Business Content.

A weird character becomes another one after saving it with RSKC!

When we load a master data from R3 to BW, get an invalid character error which shows the weird character is kind of like two vertical parallel bars (sorry I am unable to give it here since whenever I submit this question, it will become other characters which could confuse you guys), we run RSKC to input this weird character, when inputting it, it shows as it is, but after saving it, find it becomes ##. And the data load still fails.
Any solution?
Thanks
Message was edited by: Kevin Smith

hi Kevin,
check if helps
RSKC and # sign in the middle of a word
Permitted characters during BW data load
Load problem.......Special Chars..Urgent..

Really weird network problem... Please help!

This is really starting to tick me off, so I hope you can help me. This isn't exactly Archlinux related, but the problem persists on the whole network regardless of OS being used.
Ok, so I got my new D-Link 5-port switch home a few days ago. I wanted to hook up my laptop so it could access the internet.
I'll try to illustrate how the layout of the network is made up in my home:
Internet -------> Router -------> Switch -----------> My dad's computer
|
-----------> My switch -------------> My main desktop
|
-------------> My laptop
As you see, we split the internet between our 3 computers, where 2 of them are mine, and 1 is my dad's. The problem is, that we can't run more than 2 computers online. DHCP just won't function.
If I have both of my computers online, my dad can't connect to the internet. If my dad has his computer online, I can't connect with 1 of my computers. So we are constantly only able to be 2 on the internet. I see no logical explaination for why this is happening, because the internet is split on the first switch, to my dad and me, then from my own switch, I split my connection between my 2 computers.
Please help me, this is really giving me an edge. I REALLY hope you can help

SomeoneWithAPurpose wrote:IP-Address: 87.58.149.226
That confirms my suspicion.
I think I can explain the problem. Every computer that connects to a network needs an IP address. Normally you connect a router to the internet and the router gets a public IP address from the ISP's server. This is the address that people see when you connect to their sites. When you connect your computer to the router, the router gives you a different IP address. that only people on your LAN can see. The router can give several addresses because they are only used on the LAN, so you can connect multiple computers to it and each one can get a unique IP address. When you connect to the internet, your computers communicates with the router using private IP addresses on the LAN, then your router communicates with computers on the internet using public IP addresses.
In your case, your router is not configured to give out IP addresses. Instead, when you connect you are getting a public IP address directly from the ISP's server. Your ISP only has 2 public IP addresses that it can give you so that is why you cannot connect more than 2 computers at a time. You need to configure your router to act as a gateway between your LAN and the internet. To do this, you have to access the router's menu and set up a dhcp server (which gives out IP addresses on the LAN) along with a firewall and whatever else you need (your current setup makes your computer directly accessible from the internet which can be unsafe, especially when running Windows).
Oh damn.
I went downstairs to find out where the manuals for the router were... Turns out we don't have a router ...
All we have is 3 boxes; A internet phone adapter, a ethernet xDSL modem and a switch. Maybe this is why it's all ****ed up? Sorry for the misleading, but my dad always told me that we had a router. =\
Ah... yeah, that's a problem. What brand is the modem? Maybe it has some router functionality anyway.
Last edited by Xyne (2009-04-26 00:43:04)

Error inserting data after creating a trigger (caused by commit)

Hi,
I have registered a schema so that XML files are stored in a table XMLREADINGS. I create an AFTER INSERT tigger on this table. The trigger is very basic (inserting the system date into a test table). I discovered that it works fine so long as there is no COMMIT statement in the trigger (an implicit commit is carried out). However if I have a COMMIT then creation of the trigger is fine, but when I try to drop new XML files into the repository (using WebDav) I get a file copy error.
For this simple case the lack of an explicit COMMIT statement is okay, but I want to increase the logic of the trigger and I can imagine that there will be COMMIT and ROLLBACK statements required.
Has anyone experienced this before ?
regards
Stephen

I've just discovered that you aren't supposed to use commit or rollback in triggers anyway!
A possible solution (found on this forum) is to declare the trigger as a autonomous transaction:
If you are using Oracle 8i, you can use an autonomous transaction:
CREATE OR REPLACE TRIGGER trg
DECLARE
Pragma Autonomous_Transaction
BEGIN
I'll give that a try

Facing Problem With DLL After creating Installer

Hi
I Have Developed to Test The CAN Hardware.
I am Using third party USB to CAN device (Phytec PCAN)
To communicate with PCAN device I have Used PCAN_USB.DLL
I have Tested My Code with the hardware. It Works Fine.
Then I Have Created EXE and Installer. and Install on the other system (
LabVIEW is not installed on that system). But it is not communication with the
Hardware.
If I run the EXE on the system (where LabVIEW is installed) then EXE is
communicating with the hardware.
Please guide me for the same. LabVIEW version - LabVIEW 2009
Please treats this on urgent Basis
Regards
Prabhakant Patil
Regards
Prabhakant Patil

Hi Prabhakant Patil,
How are the errors handled in your application ?
I think this should be the first thing to have a look at. Just add to your VI an error indicator and you'll see what's happenning to your application.
Regards,
Da Helmut

Error using BAPI_PO_CREATE1 to create po with ref to PR

Hi all,
I am using FM BAPI_PO_CREATE1 to create a PO wrt PR. but while executing getting an error.
No instance of object type PurchaseOrder has been created. External reference:
Purchase order still contains faulty items
Purchase requisition 10002040, item 00010, does not exist
Purchase requisition 10002040, item 00010, does not exist.
Any suggestions to solve this problem.
Thanks in advance,
Neela

Hi ,
i got the error message that 'Please maintain services sor limits' message se 029.I'm using bapi (BAPI_PO_CREATE1) and pass preq_no and preq_item in poitem structure.can u help me in this issue?

PO nuber is not coming after creating Po with refrence

Hi Abaper,
First I create Contract from VA41 Tcode, I pass external PO number. That I am getting in table VBKD-BSTKD. After I create order against that contract, Now I am giving contract no it display all records accept PO number. I want to use exit/ enhancement to get PO number.
How I will resolve this issue.
Regards,

For contract you need to make contract release order from ME31K...
Regards
Priyanka.P

Ls shows ??.html after creating file with arabic name using java applicatio

Hi,
I have a java application which is taking attachments and saving to the file system. when somebody attaches any file with the file name in arabic, the ls command shows ??.html , ????.html etc. The application is also not able to find the file later, cos it expects the arabic named file. How can I accomplish this task (" how can i rename a text file with an arabic name")
Any help would be highly appreciated
Many thanks in advance
Ushas Symon

I found a sample class that also uses HttpServlet and it won't work on my computer Either:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
public class Circle extends HttpServlet
    public void doGet( HttpServletRequest request,
                        HttpServletResponse response)
                            throws ServletException, IOException
        response.setContentType("text/html");
        PrintWriter out = response.getWriter();
        out.println( "<BODY><H1 ALIGN=CENTER> Circle Info </H1>\n");
        try
            String sdiam = request.getParameter("diameter");
            double diam = Double.parseDouble(sdiam);
            out.println("<BR><H3>Diam:</H3>" + diam +
            "<BR><H3>Area:</H3>" + diam/2.0 * diam/2.0 * 3.14159 +
            "<BR><H3>Perimeter:</H3>" + 2.0 * diam/2.0 * 3.14159);
        catch ( NumberFormatException e )
            out.println("Please enter a valid number");
        out.println("</BODY></HTML>");
}As for IE I tried setting all of my security to the lowest settings I have but it didn't work. I just noticed though that the IE explorer bar at the bottom states :
Exception null.
When the applet is first started. Not sure what to make of that.
I don't think it's a dependancy error because when I make a reference to something that the compiler can't find I get a different error. Or if I miss importing something it just refuses to compile.
I'm wondering if there's something wrong with my Java or the Servlet classes?
Thanks
Ga'an djin

Really weird Network errors with AD after create actions with IdM 5.5

Similar Messages

Maybe you are looking for