Realtime video stream on the cell Phone

Hi,
I have to develop a prototype to show a cell phone handling a CCTV feed
1. I am trying to figure out how easy or difficult it isn The cell phone should be able to display real-time feed coming from a CCTV and provide the cell phone user the ability to record, stop, and rewind it.
2. Any idea how long the prototype should take.Aany crude demo will do.
3. What components of J2ME should I use (CDC,CLDC ...?..sorry I am new to this).
4. Is there any sample code that can help me in doing it quickly ?
Thanks in advance
QM

What is the video converted from? And what format is it converted to?
Premiere Elements is technically not a conversion program. It's a video editor. But if you can tell us what type of camcorder your original video came from and what specs you output, that would be helpful.
It also might help to know which version of Premiere Elements you're using.

Similar Messages

  • How  do the dynamic state to record image in the cell-phone?

    Excuse me.How do the dynamic state to record image in the cell-phone?Or whether it has the feasibility or not?..Somebody can give me some opinions and data,please.
    Thanks.

    I don't understand very well what you want, but to record and image (get and snapshot) you have to create an Player, realize the player, start it and then get the snapshot. ex:
                player = Manager.createPlayer("capture://video");
                player.realize();           
                VideoControl videoControl = (VideoControl) player.getControl("VideoControl");
                player.start();
                byte[] data = videoControl.getSnapshot(null);
                Image image = Image.createImage(data, 0, data.length);To find out if a device can record images you can use this:
                boolean mmapiAvailable = System.getProperty("microedition.media.version") != null;
                boolean canGetSnapshots = System.getProperty("supports.video.capture") != null;Hope that answer your question.

  • Is there any app that allows me to control the cell phone from the computer with the mouse?

    Is there any app that allows me to control the cell phone from the computer with the mouse?

    No this is not possible.
    But you could use the iPhone Simulator of Xcode if you have access to an Mac. Like the name explains, it simulates an iPhone on an Mac, but you cannot use all standard apps

  • Does Premier Elements allow me to record video streaming from the internet?

    Does Premier Elements allow me to record video streaming from the internet?  If so which version and how?

    kc42k
    Although Premiere Elements is not going to record streaming video from the Internet but there are other programs that can, you should consider the terms of service for the web site that is the source for the streaming video.
    Online, there are very comprehensive articles on numerous programs that will do the recording.
    But, even those articles point out that many of the Internet web sites that you target for their videos have terms of service that would legally prohibit the recording of streaming video from the named web sites, one example, YouTube, if no download button and depending on the terms of service.
    Please consider. Any questions about the above, I can point you to the appropriate documentation on the matter.
    Thank you.
    ATR

  • My iphone was working normally ando today...it turned off and....i'm trying to turn on...buy is not working...and the cell phone is hot hot hot...someone can help me please??

    when i plug the cell phone in my computer...the computer doesn't aceppet the cell phone..so...i can't restore my iphone...
    i press both bottons...and...is not working....

    The recovery mode sound like your best option and unfortunatly everything will be lost unless you did a back up of your device recently make sure you have a computer running itunes 11.1.1 plug in the usb to the computer and after that power your device off by holding the sleep/ wake button until it says slide to power off and then slide to power off after that press and hold the home button while holding the home button connect your device to the computer continue to hold the home button until connect to itunes shows on the phone. on the computer it will say itunes has reconized a device in recovery mode just click through the menu to get your device to back to new

  • What a long way the cell phone has come

    after reading a few of the topics and issues, and believe me i've had my issues as well. i think we should take a few minutes to realize how far the cell phone has come. i know i should be one to talk, i've put in a few comments myself. however sitting here playing with the new toy, i remember when all cell phones did was send and receive calls. now with the iphone we could do so many things that we asked. so with that being said, yes there are a few details that need to be worked on...but while we sit impatiently till then we should all remember how much the cell phone has progressed.

    Hea hea!
    Shoot man, in 1992 I paid $400 bucks for a huge brick that worked "sometimes" and .40/minute no matter when I made a call.
    To complain about the iPhone is just silly.

  • Why are the Cell Phone numbers that show up on my statement not the numbers I am Texting to?

    This has to do with texting only.  Lately I have noticed that a lot of the cell phone numbers we are texting to and from do not show up on the statement.  What shows up is a series of random numbers.  Why is this happening??? 

    Re Text messaging.  I have noticed that a lot of the phone numbers are not phone numbers but just a random set of numbers.  0000265060, 0032665115, 0000032665, 0032665114.  These are people my son is texting to and receiving texts from.  Does this mean the person has a blocked phone number???

  • How can I change the active Midlet using the '*' cell phone button

    Hello
    I've got a problem trying to do that in J2ME MIDP:
    'I have different class extending Midlet that I want to display one after the other. The change may be done when I click the '*' button of my cell phone'
    For the moment I've created a main class that extend Canvas and which contain a vector of objects extending Midlet.
    I'm able to change the objet which I want to display, but not to display it....
    Is it possible to do that?
    Do you have any idea of how to deal with that?
    Thanks a lot...

    Hello
    Thx for your answer .. but I shouldn't have explain correctly my problem because I don't think this answer it .. sorry
    I need an interaction between a Midlet class and a Canvas class.
    In fact I have several forms, and I need to allow my Canvas class to change the form displayed when a button is pressed.
    But If I have a form in a Midlet , I can display it but can't catch the click on a button.
    And if my Canvas is displayed I don't know how to display the form I want to.
    So is it possible to do that... and if so, how?
    Thank you very much...
    Al161084
    Message was edited by:
    al161084.1

  • Photo Album app and Video viewing crashes the whole phone

    Hi.
    Not sure whether there is already another forum for this? 
    I am running android 4.3.
    I have found that when I go into my photo album and scroll right the way down to the bottom of the page, the pictures stop showing a thumbnail and instead all I am shown are blacked out squares.  When I then scroll to the top of the page the thumbnails that were previously there then turn black too.  This then has the effect of crashing the whole phone.  What I mean by this is that it becomes unresponsive, the back and home buttons do not work and I am then shown a barrage of "Album is not working" or "Google+ is not working" or "system is not working" messages..
    This is also the case when I am attempting to view videos.  The phone will play some videos but then all of a sudden it will begin to become unresponsive in the same way as I have mentioned before. 
    When the phone has become unresponsive, the screen times out and I am unable to access my phone again for a good few minutes. When I can eventually access the phone, I have found the same sort of messages and unresponsiveness will occur again when I enter these apps or try to view videos through the movies app or another video viewing app and I am forced to restart the phone. 
    The issue with album app occurs every time I try to access the photos at the very bottom of the page.   The issue with the videos appears to be more temperamental and will occur every so often and through either the movies app or when viewing videos through alternate sources such as facebook.
    I have only recently bought the Z1 and I have to say I am incredibly disappointed by the device so far! 
    Can anyone offer any sort of guidance or tips on what I should do?
    Thanks!
    Gurpal

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    Sounds like there could be a problem with the indexation of your media files. So I suggest that you try to clear data for the media storage application.
    Settings > App's > All > Media storage > Clear data.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Cant sent text because it says the cell phone number is not an ios5

    when i try to send a text message from my ipad, it won't accept a cell phone number as a recipient, says it is not registered with iMessage.

    "Demo" provided the following in a previous post...
    It means exactly what it says. That user has not registered and setup Messages on his or her device yet so you can not message with them. They have to set it up first before you can reach them. It does not happen automatically just because you are sending them a message.
    Messages only works with other iOS devices - not Android phones - so the person that you want to Message with must have an iPod Touch, iPad, iPhone or a Mac running Mountain Lion.

  • Video streaming on the Internet

    I want to do a live broadcast video to Internet using Flash
    Media Encoder and Flash Media Server 2, but I have a few knowledge
    about Flash technology (I can do it very quickly with Windows Media
    Services).
    I use the encoder to pass the video to the server, but I have
    many doubts about how to create an application in FMS. What I only
    do is just to create a subdirectory in the applications directory,
    with no content, no files. That was enough to get the encoder to
    work with no errors. In the FMS management console I see a client
    connected (the encoder). But I have no idea about how any client
    can connect to the FMS to see the live streaming.
    Do I have to build a swf file using Flash Pro 8 (for example)
    to capture de real time streaming so the client connect to that swf
    file?
    Any idea?

    Java and flash are not supported, and probably never will be (http://www.apple.com/hotnews/thoughts-on-flash/). Some browser apps such as Skyfire, iSwifter and Puffin 'support' flash, but they don't work on all sites judging by their reviews. You could check to see if the sites that you are interested in have their own apps in the iTunes App Store.

  • On my iPhone 4s my texts are coming up with the cell phone

    Just recently, when someone sends me a text, my iPhone 4s has recently began showing cell phone #'s instead of their names. Why?
    There are no names recorded in my contact list also.

    Try ctrl+opt+cmd+8 for a start.
    (⌃⌥⌘ 8)
    That toggles colour inversion on and off. (for the visually impaired)

  • How to list video files from the mobile phone?

    i need to list all video files from the mobile hone. can any one help me?

    Filter for Metadata > File Type > Video and then select them and press delete.  Then pick from catalog or disk.

  • Removing a Video Stream From The Stage

    what I have:
    main.swf 1 frame
    btns load various external.swfs
    I have 3
    one swf (commercial.swf)has a slideshow inside using the SlideShowPro component Not the flv player
    problem: stream remains after swf is swapped out with new.
    AS code  main timeline
    var Xpos:Number = 0;
    var Ypos:Number = 0;
    var swf:MovieClip;
    var loader:Loader = new Loader();
    var defaultSWF:URLRequest = new URLRequest("swfs/home.swf");
    loader.load(defaultSWF);
    loader.x = Xpos;
    loader.y = Ypos;
    addChild(loader);
    // Btns Universal function
    function btnClick(event:MouseEvent):void {
        removeChild(loader);
        var newSWFRequest:URLRequest = new URLRequest("swfs/" + event.target.name + ".swf");
        loader.load(newSWFRequest);
        loader.x = Xpos;
        loader.y = Ypos;
        addChild(loader);
    // Btn listeners
    home.addEventListener(MouseEvent.CLICK, btnClick);
    bio.addEventListener(MouseEvent.CLICK, btnClick);
    commercial.addEventListener(MouseEvent.CLICK, btnClick);
    NOW
    home and bio.swf's have _mc's inside
    the commercial.swf has the slideshow pro component inside
    once commercial.swf is on stage after another btn is clicked the audio remains.
    slide show pro is being used not an .flvPlayer
    I need to know where the code to stop the stream goes in the main.swf or the swf with the slideshow component?

    I did get somewhere, I have a few different main.swfs I used as I was experimenting. I have one that uses  UI loaders to load all the static (no videos inside) swfs to the main timeline those work fine
    Also in that main.swf I have one loader being called by the loader class which also works. But I still had the stream remaining problem. I was able to add another set of event listeners that call the "unload and stop" method on the same buttons for my main navigation that call the gotoandstops to frames and they now unload the commercial.swf (which is the only swf I have using the slideshow pro component AND stop the stream as well.
    Here's what I have
    in main.swf
    gotoAndStop("home");
    btn_home.addEventListener(MouseEvent.CLICK, btn_home_click);
    function btn_home_click(evt:MouseEvent):void {
        gotoAndPlay("home")
    btn_bio.addEventListener(MouseEvent.CLICK, btn_bio_click);
    function btn_bio_click(evt:MouseEvent):void {
        gotoAndPlay("bio")
    btn_commercial.addEventListener(MouseEvent.CLICK, btn_commercial_click);
    function btn_commercial_click(evt:MouseEvent):void {
        gotoAndStop(12)
    // event listeners for unloads
    btn_home.addEventListener("click",afterClick);
    btn_bio.addEventListener("click",afterClick);
    function afterClick(e:MouseEvent):void {
        ldr.unloadAndStop();
    as layer of frame 12 only loader class
    var ldr:Loader = new Loader();
    var url:String = "commercial.swf";
    var urlReq:URLRequest = new URLRequest(url);
    ldr.load(urlReq);
    addChild(ldr);
    this method will unload and stop commercial.swf when the home_btn or bio_btn buttons are clickedI did not try this using the UI Loader
    So I now will either need to use just the loader class to call all the swfs (like a variable) what I had used before and have the afterclick function in the home and bio in all the buttons (which I will add later)
    I hope this helps as there has to be a solution.
    thanks again for all your help by the way.
    rd

  • Having the same problem with my music videos streaming from the icloud.  Used to work fine.  Music streams OK

    My apple TV no longer will stream the music videos, especially when in shuffle mode.  Music is fine.  Music Videos from the computer library work just fine.
    All was well until about 3 weeks ago
    Appears from reading the different communites the problem is widespread
    Anyone found a solution
    I even purchased another Apple TV thinking the original may have been defective

    Welcome to the Apple Community.
    I believe you can only wait for Apple to resolve this issue.

Maybe you are looking for