Receiver AS2 Adapter issue.....Failed to get configuration from DATABASE. S
Hi,
Iam doing prototyping for File -AS2 adapter and ended up with below erros.
Error type: COMPONENT_ERROR >> Error date: 6/17/11 8:04 AM >> Description: AS2 Adapter failure Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.. com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:379) [6/17/11 8:04 AM]
and
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing..
The setting i have made during configation are :
1> Reciver Party with Agency,Schema and Name entered.
2>Identifiers for both Sender and reciver channel fileld with values seeburger and AS2ID.
3>Used Sender uses Virtual reciver in sender aggremnet.
4> Reciever CC have modules localejbs/Seeburger/solution/as2 and localejbs/ModuleProcessorExitBean in sequence.
Please provide solutions to overcome the issue.
As this is prototyping, i have downloaded Free As2 client and trying to send files to that client from PI.
Hi Dinesh,
make sure to also configure a report channel (refer to the sample chapter in the SEEBURGER AS2 documentation) in order to receive AS2 MDNs for your sent message. Additionally report channels are needed if the SEEBURGER specific TransmissionReports are requested.
Hope that helps
Greetings
-Sascha-
Similar Messages
-
Failed to get configuration from secure gateway. Contact your system administrator.
I have an ASA 5515 running 9.1(1).
One of my customers is attempting to connect with AnyConnect 3.1.02040 and after authenticating, he gets the message
Failed to get configuration from secure gateway. Contact your system administrator.
I have about 100 other customers who have not had this issue and can connect fine.
Since it appears to be localized to his PC, he's uninstalled and reinstall the client, but to no avail. He's using Windows 7 Pro.
On the ASA, while he is attempting to connect, I see this:
15:48:04|302014|<<<REMOTE IP>>>|51032|<<<ASA IP>>>|443|Teardown TCP connection 495403 for outside:<<<REMOTE IP>>>/51032 to identity:<<<ASA IP>>>/443 duration 0:00:00 bytes 8241 TCP Reset-I
14:48:04|725007|<<<REMOTE IP>>>|51032|||SSL session with client outside:<<<REMOTE IP>>>/51032 terminated.
14:48:04|113039|||||Group <GroupPolicy_AnyConnect> User <etpdeir> IP <<<<REMOTE IP>>>> AnyConnect parent session started.
14:48:04|734001|||||DAP: User etpdeir, Addr <<<REMOTE IP>>>, Connection AnyConnect: The following DAP records were selected for this connection: DfltAccessPolicy
14:48:04|113008|||||AAA transaction status ACCEPT : user = etpdeir
14:48:04|113019|||||Group = ibmdtsc, Username = etpdeir, IP = 124.128.162.43, Session disconnected. Session Type: AnyConnect-Parent, Duration: 0h:41m:41s, Bytes xmt: 885580, Bytes rcv: 1343, Reason: Connection Preempted
14:48:04|716002|||||Group <GroupPolicy_AnyConnect> User <etpdeir> IP <<<<REMOTE IP>>>> WebVPN session terminated: Connection Preempted.
14:48:04|113009|||||AAA retrieved default group policy (GroupPolicy_AnyConnect) for user = etpdeir
14:48:04|113004|||||AAA user authentication Successful : server = 172.29.128.126 : user = etpdeir
14:48:04|725002|<<<REMOTE IP>>>|51032|||Device completed SSL handshake with client outside:<<<REMOTE IP>>>/51032
14:48:03|725001|<<<REMOTE IP>>>|51032|||Starting SSL handshake with client outside:<<<REMOTE IP>>>/51032 for TLSv1 session.
15:48:03|302013|<<<REMOTE IP>>>|51032|<<<ASA IP>>>|443|Built inbound TCP connection 495403 for outside:<<<REMOTE IP>>>/51032 (<<<REMOTE IP>>>/51032) to identity:<<<ASA IP>>>/443 (<<<ASA IP>>>/443)
Any ideas?i had this problem. for me the cause had to do with internet explorer TLS settings.
in IE8 go to tools, internet options, advanced and under security I had to make sure Use TLS 1.0 was checked (only Use SSL 3.0 and Use TLS 1.1 were checked. I left them checked.). -
Dynamic filename in receiver AS2 adapter in B2B Add-on
Hello Experts,
Can you please let me know how we can put dynamic filename in the receiver AS2 adapter for B2B Addon on SAP 7.4.
Thanks
SaurabhHi Ryan / Experts,
Let me explain you in more detail.
In the receiver AS2 Communication channel, if I keep the Filename field as blank as shown below, then in the Mendelson inbox folder, a file is generated with the name "ASJAVA_DX5" which is my business component name.
If I fill the filname field for example with "CONTRL", then in the Mendelson inbox folder, a file is generated with the name "CONTRL".
This is my requirement because, suppose i trigger this interface "first time", a file with static name (ASJAVA_DX5/CONTRL ) would be generated in the inbox folder. If I trigger this interface "second time", since the file already exists with same name, it is not overwritten and I cannot check the output of 2nd trigger . Contents are not overwritten.
To solve this problem + as a general requirement, I wish to have this name to be dynamic, atleast with date+timestamp.
Can you please help. -
Hi team,
i am working on idoc to As2 interface.
how to work with MDN s at receiver side AS2 adapter?
any differences between asynchronous MDN settings and Synchronous mdn settings at receiver as2 adapter.
if difference are there could you please let me know.what are the differences?
Regards
SachinHi Experts,
any inputs please
Regards
Sachin -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance -
Is It normal that my premium category 15" retina MBPs screen has ghosting issues, and I get declined from screen replacement?
I have purchased this hardware in Budapest for approximately 3000 usd. I was a bit shocked to see screen ghosting after a few days of use. The problem was getting worse but because I am a design consultant working mainly on my Mac I couldnt take a week off to leave It at an Apple service station.
Last week I was surprised to receive the information from the local Apple repair shop in Germany that my retina MBP that I bought 13 months ago was declined from screen replacement by Apple.
Considering the price of the product I find It unacceptable that I need to work on a defective product and see shadows every time I leave an Illustrator or InDesign window open for a short period of time.
Is there any way to resolve this issue? I wouldnt like to pay another 800 dollars just to replace a component on my defective Apple product.Contact Apple Support directly. In Germany the Expresslane or this number
0800 6645 451 will allow you to speak directly to someone from Apple. Explain your situation. Mind you, AppleCare and issues with Apple products like this have to occur without any user accidents or user installed parts to ensure that Apple will cover you. If there was a user accident or installed part, you may be turned down. If you have the original Apple parts, and did the installation yourself, replace it with the original parts very carefully following the directions on http://www.ifixit.com/ unless you can afford an authorized service provider to do it for you. Since we don't speak for Apple here, being end users like yourself, that's why I say "may", as I've seen Apple handle these things on a case by case basis. So hopefully you don't have any obvious damage that looks like it is user caused. Good luck! -
Failed to get schema from the dynamic feed (example.php).
Hi,
I've been trying to get the schema from an exported xml file
ex. example.php
(using Developer Toolbox).
But it keeps saying "
Failed to get schema from the dynamic feed (example.php)."
Any help?
Thanks
WaldHere's the file:
data.php, I can see it
correctly in the browser except of the style information that are
missing.
Code:
<?php require_once('../Connections/example.php'); ?>
<?php
// Load the XML classes
require_once('../includes/XMLExport/XMLExport.php');
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue)
: $theValue;
$theValue = function_exists("mysql_real_escape_string") ?
mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
mysql_select_db($database_example, $example);
$query_data = "SELECT * FROM example";
$data = mysql_query($query_data, $example) or
die(mysql_error());
$row_data = mysql_fetch_assoc($data);
$totalRows_data = mysql_num_rows($data);
// Begin XMLExport data
$xmlExportObj = new XMLExport();
$xmlExportObj->setRecordset($data);
$xmlExportObj->addColumn("Name", "Name");
$xmlExportObj->addColumn("Damage", "Damage");
$xmlExportObj->addColumn("Speed", "Speed");
$xmlExportObj->addColumn("Level", "Level");
$xmlExportObj->addColumn("Details", "Details");
$xmlExportObj->addColumn("Type", "Type");
$xmlExportObj->addColumn("Source", "Source");
$xmlExportObj->addColumn("Location", "Location");
$xmlExportObj->addColumn("Date", "Date");
$xmlExportObj->addColumn("Price", "Price");
$xmlExportObj->addColumn("Skill", "Skill");
$xmlExportObj->addColumn("Constitution", "Constitution");
$xmlExportObj->addColumn("Intelligence", "Intelligence");
$xmlExportObj->addColumn("Wisdom", "Wisdom");
$xmlExportObj->addColumn("Strength", "Strength");
$xmlExportObj->addColumn("Member", "Member");
$xmlExportObj->addColumn("Image", "Image");
$xmlExportObj->setMaxRecords("ALL");
$xmlExportObj->setDBEncoding("ISO-8859-1");
$xmlExportObj->setXMLEncoding("ISO-8859-1");
$xmlExportObj->setXMLFormat("NODES");
$xmlExportObj->setRootNode("Category");
$xmlExportObj->setRowNode("Type");
$xmlExportObj->Execute();
// End XMLExport data
?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>example</title>
<link href="css.css" rel="stylesheet" type="text/css"
/>
</head>
<body>
</body>
</html>
<?php
mysql_free_result($data);
?>
Thanks again -
Failed to get dispatch from IBrwsr2! PHTML is null!
Anyone figure out why this is happening? So frustrating: - (
Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758 -
Error while getting image from database in SUP using ios?
Hi All,
Im developing native iOS application using sup 2.1.3 . Im getting error While retrieving image from SUP database. Here i'm trying to get image from database and show in imageView.can any one help me how to fix this issue?
In database image datatype is 'LONG Binary' .
My table Schema:
CREATE TABLE dba.ImagesTable (
RowID INT NOT NULL,
ImageName VARCHAR(20) NOT NULL,
PhotoData LONG BINARY NOT NULL,
IN SYSTEM
ALTER TABLE dba.ImagesTable
ADD CONSTRAINT ASA137 PRIMARY KEY CLUSTERED (RowID)
ALTER TABLE dba.ImagesTable
ADD CONSTRAINT ASA138 UNIQUE NONCLUSTERED (RowID)
in Xcode:
[SUP107SUP107DB synchronize];
SUP107ImagesTable *imgTable =[[SUP107ImagesTable alloc]init];
SUP107ImagesTableList *list =[SUP107ImagesTable findAll];
SUP107ImagesTable * oneRecord =[list objectAtIndex:0];
NSLog(@"rowId:%d---imageName:%@---photoData:%@---photoLenght:%d",oneRecord.rowID,oneRecord.imageName,oneRecord.photoData,oneRecord.photoDataLength);
NSData *tempData =[[NSData alloc]init];
SUPBigBinary *responseBinaryData = (SUPBigBinary *)oneRecord.photoData.value;
@try {
[responseBinaryData openForWrite:[oneRecord.photoData length]];
[responseBinaryData write:tempData];
@catch (NSException *exception) {
NSLog(@"exception: %@",[exception description]);
UIImageView *imgView =[[UIImageView alloc] initWithFrame:CGRectMake(50,50,100,100)];
[self.window addSubview:imgView];
UIImage * tempImage =[UIImage imageWithData:tempData];
imgView.image = tempImage;
[responseBinaryData close];
Error Log:
2014-04-02 18:42:15.150 SUP102[2873:70b] rowId:1---imageName:Apple---photoData:SUPBigBinary: column=c pending=1 allow_pending_state=1 table=sup107_1_0_imagestable mbo=0x0 key=(null) ---photoLenght:90656
Printing description of responseBinaryData:
<OS_dispatch_data: data[0xc891b40] = { leaf, size = 90656, buf = 0x1213a000 }>
2014-04-02 18:42:33.304 SUP102[2873:70b] -[OS_dispatch_data openForWrite:]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.305 SUP102[2873:70b] exception: -[OS_dispatch_data openForWrite:]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.305 SUP102[2873:70b] -[OS_dispatch_data close]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.306 SUP102[2873:70b] [ERROR] [AppDelegate.m:497] NSInvalidArgumentException: -[OS_dispatch_data close]: unrecognized selector sent to instance 0xc891b40This thread talks about uploading image to SAP from a IOS device,Sending Image to SAP via iOS Native app (SUP 2.1.3)
Midhun VP -
Error:Failed to retrieve data from database [Vendor Code:3001]
Hello FOlks am trying to run a crystal report but when i try to run it somehow returns this error i.e [Error:Failed to retrieve data from database [Vendor Code:3001], I have no clue wats happening with this.Can anybody please throw some light on this.Am providing the sql behind this report for reference.
SELECT "CLIENT"."CLIENT_NAME",
"RECOVERY"."AMOUNT",
"RECOVERY"."RECOVERY_TRANSACTION_INTERNAL",
"RECOVERY"."ALLOCATION_CHECK_AMOUNT",
"RECOVERY"."RECOVERY_DATE"
FROM "HRI1_OWNER"."CLIENT""CLIENT",
"HRI1_OWNER"."EVENT_CASE""EVENT_CASE",
"HRI1_OWNER"."SETTLEMENT""SETTLEMENT",
"HRI1_OWNER"."RECOVERY""RECOVERY"
WHERE "CLIENT"."CLIENT_ID" = "EVENT_CASE"."CLIENT_ID"
AND "EVENT_CASE"."EVENT_CASE_ID" = "SETTLEMENT"."EVENT_CASE_ID"
AND "SETTLEMENT"."SETTLEMENT_ID" = "RECOVERY"."SETTLEMENT_ID"
AND "CLIENT"."CLIENT_CODE" <> 'CLIENT 1'
AND "CLIENT"."MAJOR_CLIENT_ID" in
(Select major_client_id
from major_client
where major_client_code in ('LA', 'PFG'))
ORDER BY "CLIENT"."CLIENT_NAME"Edited by: user11961230 on Nov 12, 2009 6:57 AM@oradba:Hi Thanks for getting bak. Well i have ran the query using PL/SQL Developer tool and yes its mapping to ORA-03001:unimplemented feature. i dont know what the problem is.
@centinul: well i dont have any views in there.but still cudnt figure out why its throwing tht error
Thanks
Edited by: user11961230 on Nov 12, 2009 7:12 AM -
Failed to retrieve data from database?
I am a new user
When I try to Preview a document I am prompted to enter in database information.
I have tried a few times to connect to my server and
continuously keep getting the same error page
No matter what I enter in the two fields, this is what pops up.
"Failed to retrieve data from database"
" Details: ADO Error Code:0x
Source: Microsoft OLE DB Provider SQL server
Description: Invalid object name: ScratchWO.dbo.tblsyslistviewprint'.
SQL State:42502
Code:208"
When the OLE DB(ADO) page opens and asks for a server and a database, what is needed to stop the error from happening
If anyone has any information that would be great !SQL State:42502 means an user authorization error. Check the user and it's access to the target database.
-
Receiver AS2 Adapter : Empty Message Handling
Hello Experts ,
We are trying to work on following requirement .
File -> PI -> AS2 ( File) ( We are using Pranke to drop our message to the receiver system) (MDN ack too is in place )
There are times when none of the source records are valid and we have an empty payload post mapping.
In AS2 adapter we are using StrictXML2Plain.
Scenario works fine for all target messages which have data and a file is created at the receiver end. MDN ACK works fine too.
Problem is when we have empty target payloads , We get following error in communication Channel monitoring.
Information
SEEBURGER/AttribMapper: Finished succesfully, 1 properties set or deleted
Information
MP: processing local module localejbs/ModuleProcessorExitBean
Information
Message entered AF MP exit bean and will be passed to the JCA adapter now.
Information
SEEBURGER/AS2: Received order from system.
Error
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond # , SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond #
Error
MP: exception caught with cause javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond # , SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond #
Error
Adapter Framework caught exception: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond # , SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond #
Has anyone handled such situation ? Is there any workaround at the SAP end to handle this issue ?
Or is this to be handled at the Pranke end ?
Attaching the Seeburger AS2 monitor error as well for empty messages ,
State
Error on send, will be retried
Status Description
Could not deliver as2 message to partner: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond # null
Little urgent and your expertise is appreciated PI geeks
SayaleeHi,
here is the my requirment one source -> two target interfacess (0..1)
If u have 2 target interfaces,then this is not suffice..... u should make it as 0..unbounded both in operation mapping and message mapping.
But based on ur requirements posted above i guess u have only one inbound interface at a time based on some conditions....
But,
<messages>
<messages1>
based on condition first message type not created in mapping.
<messgaes2>
The error u r getting is because.... u want only one interface in target at a time....
Then u should not generate Message1 also in the target.
So avoid mapping to message1 if u want only message2.
If both message1 and message2 are created in target means... it is triggering for two interfaces.... so avoid one message1 or message2... based on some conditions u have..
Still nt solved do post...
Babu -
Receiver JMS adapter issue in PI 7.1
Hi All,
We are using JMS receiver adapter for one of our scenarios. I'm facing different type of issue in production system
Issues:
If the channel is functioning the messages are successfully delivering to end system. If there are NO messages for long time the channel is not sending any message to end system and messages are getting failed in PI.
If i STOP and START the channel after few minutes channel able to deliver the messages.
I'm not not able to figure out where the issue is causing.
Please assist me to get ride of this issue.
Thanks in advance
- VRHello Rajesh and all,
Below is the error message i'm receiving. This issue is happens when there is no message flow for few hours and when a new message comes adapter channel in RWB through below error message.
Please assist with inputs
Message processing failed. Cause:com.sap.engine.interfaces.messaging.api.exception.MessagingException:Connector for ConnectionProfile of Channel:IN_JMS_xxxx
node:xxxx havingobject id:xxxxxxx encountered error:MQJMSxxx:an internal error has occured. Please contact your system administrator. Detail: com.ibm.mqservices.MQInternalException:MQJE001:
An MQException occurred:Completion Code 2,Reason 2195 MQJE046:Unsupported codeset:0 in sending to destination queue:///xxxxxx.QUEUE?targetClient=1, the message message:JMS Message class:jms_txt JMSType: null
JMSDeliveryMode:2 JMSExpiration:0 JMSPriority: 4 JMSMessageID: null JMSTimestamp: 0 -
Sharepoint server 2013 configuration issue - failed to create configuration database
Hi All,
I have installed the SharePoint server 2013. After installing the SharePoint products, the configuration stops at failure of creating configuration database.
Some system configuration & info:
- 1 Domain controller server run Active Directory services on Windows server 2008 R2 SP1 (PC1 with name DC.Brainfiniti.com)
- 1 Server which is used for installing Sharepoint server 2013 and MS SQL server 2008 R2 SP1 (PC2 with name App.Brainfiniti.com)
- All of PCs were satisfied the requirement of Sharepoint server 2013
- Firewall turned off & No antivirus tool was installed.
- During installing of Sharepoint, choose "Complete" option: Farm mode and use SQL Server instead of SQL Express.
- During configuration, created a new farm with a domain user account.
- Use domain account to log on and install, configure in Sharepoint & SQL server (PC2)
ATTEMPTS:
1. Tried install and set up all of steps with just 1 account - domain administrator.
2. Tried with separate domain account:
- SQL Service account use for:
+ Install SQL server 2008
+ Connect all SQL services
+ Admin for SQL server
- Setup account use for:
+ Member of local administrator group in PC2
+ Install Sharepoint
+ Run Configuration wizard
+ Was granted permission in SQL database: dbcreator, securityadmin, sysadmin and deselect serveradmin role.
+ Was choose for the database account in configuration database step
Also tried with SQL service account in this step.
3. Tried with Standalone mode for Sharepoint installing
4. Trie with domain name: Brainfiniti.local
5. Tried with some another solution from topic relate to database configuration in our community but not successful.
But all attempts are failed at this configuration database step :'(
Please correct me if I am going wrong by missing something or do I need to start/install some services.
Screenshot Attached
Sorry! Cannot add screenshot because my account is still not verified. Will add later.
LOG ENTRY:
01/23/2013 06:58:28 1 INF Entering function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
01/23/2013 06:58:28 1 INF Found a task by the name of adminvs in the task collection
01/23/2013 06:58:28 1 INF Entering function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:28 1 INF Entering function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Entering function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Trying to start service W3SVC and waiting 180 sec to do so
01/23/2013 06:58:28 1 INF service W3SVC is Running, nothing to do
01/23/2013 06:58:28 1 INF starting service W3SVC (it may already be started)
01/23/2013 06:58:28 1 INF Leaving function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Leaving function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Trying to see if port 40993 is free on machine APP. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF A SocketException was thrown with
SocketError ConnectionRefused
01/23/2013 06:58:30 1 INF Connect has been refused for port 40993, so we will consider this a free port
01/23/2013 06:58:30 1 INF Have not found a free port yet. Number of tries is 1. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF Adding port 40993 to the exclusion list so it is not chosen again during this run
01/23/2013 06:58:30 1 INF Leaving function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:30 1 INF Leaving function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
I just post a part of its logs which contain "error" string because it's too long.
According this log, there is a error in port connection but i've turned firewall off ???
Please help me with this mix up :'(
p/s: sorry for my English!
Thanks,
Hien HoangBelow is the logs entry with "ERR" marked line:
01/23/2013 07:03:17 9 INF Now joining to farm at server app.brainfiniti.com database SharePoint_Config
01/23/2013 07:04:12 9 ERR Task configdb has failed with an unknown exception
01/23/2013 07:04:12 9 ERR Exception: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not
be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 ERR An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception
information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Creating the OnTaskStop event for task configdb
01/23/2013 07:04:12 9 ERR Task configdb has failed
01/23/2013 07:04:12 9 INF friendlyMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 9 INF debugMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Firing the OnTaskStateChanged event for task configdb
01/23/2013 07:04:12 9 INF Entering function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName
for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName
is configuration database
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Received an TaskStateEventHandler event. task:configdb TaskBase.State:stopped
01/23/2013 07:04:12 9 INF Entering function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Incremented the number of tasks failed to 1
01/23/2013 07:04:12 9 INF Leaving function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Task configdb has stopped and failed. Total failed is now 1
01/23/2013 07:04:12 9 INF Leaving function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Invoking the UI thread with the task state chagne event
01/23/2013 07:04:12 1 INF Entering function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 1 INF Received an TaskStateEventHandler event. task:configdb
TaskBase.State:stopped TaskBase.TaskResultconfigdb
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 ERR Task configdb has stopped and failed. Total failed
is now 1
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
disconnect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter disconnect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
connect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter connect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
create
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter create in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
for language English (United States)
01/23/2013 07:04:12 1 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
is Failed to create the configuration database.
01/23/2013 07:04:12 1 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Updating the task label below the progress bar Failed to
create the configuration database.
01/23/2013 07:04:12 1 INF Entering function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Leaving function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Last message from task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Updating the task additional notification information below
the progress bar An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Leaving function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 9 INF Sleeping an extra 1 ms so things don't go too fast for the user for this
task
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background with our
trademarked image
01/23/2013 07:04:12 9 INF Leaving function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Leaving function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Leaving function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Leaving function TaskThread.ExecuteTask
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName for language English (United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName is configuration database
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Task configuration database failed, so stopping execution of the engine
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key disconnect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter disconnect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key connect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter connect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key create
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter create in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel for language English
(United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel is Failed to create the configuration
database.
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Failed to create the configuration database.
An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 4 INF Entering function TaskDriver.NotifyTaskSummary -
Hi experts
We have migrated from XI 3.0 to PI 7.1.
The corresponding AS2 seeburger is also upgraded to a compatible version.
But after that it seems the mapping is not working. I am getting the foollowing error while using AS2 adapter at receiver side.
Runtime exception during processing target field mapping /LIST/S_ISA/D_I05_2. The message is: Exception:[java.lang.NoClassDefFoundError: com/seeburger/functions/permstore/VariableFactory] in class
A function in map uses seeburger classes(VariableFactory)
Thanks and Regards
Dhanish JosephAs Anoop said check for property store values.
http://seeburger.com/xi/SeeFunctions provider.servlet.server ; http://localhost/50100 . check for this entry from property store from see front end.
make sure all other mapping variables and addressbook values imported properly.
Regards,
Maybe you are looking for
-
Trying to network my MacBook Pro to my desktop PC, getting error -36...
Title explains the problem. I can network wirelessly to my Dell laptop fine, but not the desktop. What's going on? Is there some particular setting on the XP desktop that I'm missing? I've got the firewall turned off, and have tried every input I can
-
Mount FAT32 USB flash storage in Solaris 10
Hi guys, girls, and undecided. I've just upgraded my Winblows XP laptop to dual-boot Solaris 10. I've been trying in vain to get a few things working, the most annoying of which is my USB flash storage disk. I've tried 'pkill -HUP vold', to no avail
-
Recommended hardware configuration when using Adobe Illustrator and Photoshop
Hello! I am an Illustrator who uses Adobe Illustrator and Photoshop most of the time. Today I am using Adobe CS5.5 suite and is thinking of getting the Adobe CC. As my computer today is abit old and "tired", I am unsure about what to focus on when up
-
How do i fix my photoshop cs2 for windows 7?
I got a new comp thats is running windows 7 and installed my photoshop cs2 software and at first everything seemed fine until i noticed some differences in the performance. When i try to draw witht he brush tool it is way to slow, for example i draw
-
IPod 2007 160GB Classic Stuck on Apple Logo Reboot?
Hello Hopefully somebody can help? I have a iPod 2007 160GB Classic which is stuck on the apple logo reboot? I have tried everything posted on the similar topic below without success although I'm a windows user and not mac:- https://discussions.apple