Query on Receiver as2 adapter
Hi team,
i am working on idoc to As2 interface.
how to work with MDN s at receiver side AS2 adapter?
any differences between asynchronous MDN settings and Synchronous mdn settings at receiver as2 adapter.
if difference are there could you please let me know.what are the differences?
Regards
Sachin
Hi Experts,
any inputs please
Regards
Sachin
Similar Messages
-
Dynamic filename in receiver AS2 adapter in B2B Add-on
Hello Experts,
Can you please let me know how we can put dynamic filename in the receiver AS2 adapter for B2B Addon on SAP 7.4.
Thanks
SaurabhHi Ryan / Experts,
Let me explain you in more detail.
In the receiver AS2 Communication channel, if I keep the Filename field as blank as shown below, then in the Mendelson inbox folder, a file is generated with the name "ASJAVA_DX5" which is my business component name.
If I fill the filname field for example with "CONTRL", then in the Mendelson inbox folder, a file is generated with the name "CONTRL".
This is my requirement because, suppose i trigger this interface "first time", a file with static name (ASJAVA_DX5/CONTRL ) would be generated in the inbox folder. If I trigger this interface "second time", since the file already exists with same name, it is not overwritten and I cannot check the output of 2nd trigger . Contents are not overwritten.
To solve this problem + as a general requirement, I wish to have this name to be dynamic, atleast with date+timestamp.
Can you please help. -
Receiver AS2 Adapter : Empty Message Handling
Hello Experts ,
We are trying to work on following requirement .
File -> PI -> AS2 ( File) ( We are using Pranke to drop our message to the receiver system) (MDN ack too is in place )
There are times when none of the source records are valid and we have an empty payload post mapping.
In AS2 adapter we are using StrictXML2Plain.
Scenario works fine for all target messages which have data and a file is created at the receiver end. MDN ACK works fine too.
Problem is when we have empty target payloads , We get following error in communication Channel monitoring.
Information
SEEBURGER/AttribMapper: Finished succesfully, 1 properties set or deleted
Information
MP: processing local module localejbs/ModuleProcessorExitBean
Information
Message entered AF MP exit bean and will be passed to the JCA adapter now.
Information
SEEBURGER/AS2: Received order from system.
Error
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond # , SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond #
Error
MP: exception caught with cause javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond # , SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond #
Error
Adapter Framework caught exception: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond # , SEEBURGER AS2: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond #
Has anyone handled such situation ? Is there any workaround at the SAP end to handle this issue ?
Or is this to be handled at the Pranke end ?
Attaching the Seeburger AS2 monitor error as well for empty messages ,
State
Error on send, will be retried
Status Description
Could not deliver as2 message to partner: org.apache.commons.httpclient.NoHttpResponseException: The server as2gw.pranke.com failed to respond # null
Little urgent and your expertise is appreciated PI geeks
SayaleeHi,
here is the my requirment one source -> two target interfacess (0..1)
If u have 2 target interfaces,then this is not suffice..... u should make it as 0..unbounded both in operation mapping and message mapping.
But based on ur requirements posted above i guess u have only one inbound interface at a time based on some conditions....
But,
<messages>
<messages1>
based on condition first message type not created in mapping.
<messgaes2>
The error u r getting is because.... u want only one interface in target at a time....
Then u should not generate Message1 also in the target.
So avoid mapping to message1 if u want only message2.
If both message1 and message2 are created in target means... it is triggering for two interfaces.... so avoid one message1 or message2... based on some conditions u have..
Still nt solved do post...
Babu -
Hi,
Iam doing prototyping for File -AS2 adapter and ended up with below erros.
Error type: COMPONENT_ERROR >> Error date: 6/17/11 8:04 AM >> Description: AS2 Adapter failure Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.. com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:379) [6/17/11 8:04 AM]
and
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing..
The setting i have made during configation are :
1> Reciver Party with Agency,Schema and Name entered.
2>Identifiers for both Sender and reciver channel fileld with values seeburger and AS2ID.
3>Used Sender uses Virtual reciver in sender aggremnet.
4> Reciever CC have modules localejbs/Seeburger/solution/as2 and localejbs/ModuleProcessorExitBean in sequence.
Please provide solutions to overcome the issue.
As this is prototyping, i have downloaded Free As2 client and trying to send files to that client from PI.Hi Dinesh,
make sure to also configure a report channel (refer to the sample chapter in the SEEBURGER AS2 documentation) in order to receive AS2 MDNs for your sent message. Additionally report channels are needed if the SEEBURGER specific TransmissionReports are requested.
Hope that helps
Greetings
-Sascha- -
Hi Experts,
I have got a special requirement, can you please suggest is this requirement is possible or not in SAP PI using seeburger AS2 adapter. We have a got probelm in Our GIS System in setting up AS2 profiles for one of our customer. So we thought of using Seeburger AS2 adapter for this requirement.
By using the Seeburger AS2 adapter I have to receive and Post EDI messages. I have to decrypt the Inbound message and need to stage on the PI Server, No need of message mapping and posting to receiver system. We have a process in GIS system to pick the file from PI Server and do the mapping and post the output data to ORD System.
For the outbound transactions like 855 and 856, GIS will generates the EDI 855 and 856 files on PI Server. Seeburger AS2 adapter need to encrypt this messages and send to partner's AS2 server.
Is the above requirement is feasilble in SAP PI using AS2 adapter?
Any other ideas on this is greatly appreciated
Thanks,
KishoreI have to decrypt the Inbound message and need to stage on the PI Server, No need of message mapping and posting to receiver system.
For inbound cases, you may use PI as the receiver system and use NFS protocol of File adapter to put the file on PI server. If you use decryption certificate at sender, you may perform the decryption very well.
Seeburger AS2 adapter need to encrypt this messages and send to partner's AS2 server.
This can again be done by the encryption certificate shared with the third party using receiver AS2 adapter.
Is the above requirement is feasilble in SAP PI using AS2 adapter?
Yes.
Regards,
Prateek -
Hi AS2 experts,
*When i tried sending an xml to partner system using AS2 adapter.. Mapping is succesfull and message is failing in receiver AS2 adapter.
1. I used the following parameters in AS2 Module.
ModuleName Module Key
localejbs/Seeburger/solution/as2 solutionid
localejbs/ModuleProcessorExitBean exit
ModuleKey ParameterName ParameterValue
exit JNDIName deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Iam getting the following error.
Success MP: Processing local module localejbs/Seeburger/solution/as2
Error : MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2.
Error : Exception caught by adapter framework: Object not found in lookup of as2.
Error : Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of as2.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
2. When i tried by removing Modulename "localejbs/Seeburger/solution/as2"
It is showing the below error like AS2ID is missing.. but its there in party configuration.
Error :
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..
Can anyone has idea what might be wrong.
Kindly suggest me asap.
Thank You.
Regards
Seema.Hi,
Plesae go through below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
and
Check with below configuration
Configuration for AS2 or simple file adapter.
We are using this module configuration for converting EDI D96A format to XML:
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic logAttID ConverterLog
bic mappingName See_E2X_ORDERS_UN_D96A
bic saveSourceMsg ORIGINAL_EDI
can someone please tell me the module configuration for reverse mapping at receiver end,i.e.,XML to EDI D96A
basically,I need mapping name for this.
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Sender AS2 adapter configuration:
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A which does the conversion of EDI-XML.
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
File receiver:
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_X2E_EDIFACT_ORDERS_UN_D93A
ONly the mapping program name changes from E2X to X2E. IN ur case it will be See_X2E_ORDERS_UN_D96A
Thanks
Swarup -
Seeburger AS2 Adapter - Dynamic Attributes
Dear all,
We have a scenario where, we are sending an IDOC from our SAP system via XI to one of our partner using AS2.
We have to manipulate the file name at the receiver end using the dynamic attributes of the AS2 communication channel.
As per the documentation and the following threads
Re: File to AS2 File Name? we have done the necessary configuration in the communication channel. The following activites are done
Selected the checkbox "Use dynamic attributes"
Under the Module tab
In Processing sequence added a new entry
Number 1
Module Name : localejbs/Seeburger/solution/as2
Module Type : Local enterprise bean
Module Key : "dynfile"
Under the Module Configuration added the following details
Module key : "dynfile"
Parameter Name : "http://seeburger.com/xi/AS2/dtAS2FileName"
Parameter Value : "DYNFILENAME"
However, I understand that this configuration is incomplete, as somewhere i need to pass the value to the variable "DYNFILENAME".
As per the thred Re: File to AS2 File Name?, Mr Srinivas Reddy mentioned 5 steps, however I am not clear about the step 3 & 4.
FYI : What I want to map as the file name is the Parter Profile in the EDIDC40 segment of the idoc and the date+time stamp
Many thanks for the help , in advance
Regards : Bobby Bal
Edited by: Bobby Bal on Sep 20, 2010 9:52 PMHi,
Use the below UDF in your mapping..
public String FileName(String a,Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://seeburger.com/xi/AS2","dtSubject");
conf.put(key, a);
As per your requirement, Use Concatenate function Idoc + Date + Time .
Pass the resultant value to the UDF and pass this to any unused Target node.
IDOC + Time+Date --> UDF --> Target node.
In your receiver AS2 adapter, Click on use dynamic attributes and Subject check boxes.
If you want to use other Dynamic attributes like dtAS2FileName, dtAS2ContentType ..
Simply replace the dtSubject with dtAS2FileName or dtAS2ContentType . No need to use any modules.
Thanks
Deepthi. -
Client Auth and SSL with Seeburger AS2 adapter
Hello All,
We are using the Seeburger AS2 adapter in our landscape and I am in the process of setting the same up and have made quite some progress in all my issues.
and I hope that you will be able to help me out.
1. Server SSL on Receiver AS2 adapter
I am sending a message from XI using the Receiver AS2 adapter to my AS2 test tool using Server SSL.
This is working perfectly fine. In my AS2 adapter I have selected HTTPS as the protocol and the message goes via SSL to the target test tool, is processed and the MDN comes back to XI perfectly.
The issue here is :
Irrespective of what is provided in the Server Certificate ( Keystore) , the message goes to my target test tool. I even left this field blank with no certificate entry and still the SSL connection was established and the message went to the target system.
Is there no validation that XI does here? I am lost what is the use of this entry Server Certificate if XI blindly accepts all SSL connections.
I am using a Decentral Adapter Engine with LoadBalancer.
2. Client Auth on Receiver AS2 Adapter
I tried to perform Client Authentication by proving my Server's private key in the AS2 adapter. The corresponding public key is loaded in my partner's Keystore.
XI error's with the error "SSL handshake failed - Bad Certificate" .
I am not sure why XI is erroring out here and I have a feeling that I have misunderstood the use of the fields in the AS2 adapter,
Server Certificate ( Keystore) and Private Key for Client Authentication.
Has anyone tried this? If further details are needed, I will be able to furnish the same.
Regards,
BhaveshHello Jens,
Thanks for your reply.
1. The Encryption and Signature part of the Interface is working absolutely fine and I use the same concept highlighted by you - The Sender always signs the message with his private key and encrypts with message with the partner's public key in the corresponding agreement.
2. Server SSL is also working perfectly fine, i.e, when XI initiates the connection the SSL connection is established to the partner.
3. Mutual Auth was the issue where I was getting the bad certificate issue.
To investigate further I moved the same setup to my Central Adapter Engine and all the issues I had described above seem to have vanished and things work exactly as I was expecting, ie.
The field : Server Certificate (Keystore) is used to provide the Target System's Server SSL's public Certificate.
The field : Private Key for Client Authentication is used where XI provides its own Server SSL's private key for Mutual / Client Authentication.
The problem seems to be with my Decentral Adapter engine and not my central adapter engine and so I guess,
1. I either have the incorrect certificates on my Decentral Adapter Engine.
2. I also have 2 instances of a Decentral Adapter Engine with a Webdispatcher and so maybe the 2 Visual Admin's of the 2 Decentral AE are inconsistent.
3. Maybe it was just a long day and I did something wrong
Will investigate further for the root cause but I am glad that my concepts remain intact and things do work as I expected them to work.
A blog on all this is on the cards sometime soon.
Cheers,
Bhavesh -
Seeburger AS2 Adapter - Cookie Control
Hello together,
on my current project I am facing this kind of problem during AS2 communication:
Our partner provides us a cookie containing a session ID. Using this cookie we are able to send messages to our partner. This cookie has no expiration date, because we should be able to send messages for an unknown amount of time, and if it had an expiration date, some messages would fail for no logical reason.
On the partner side, though, the sessionIDs are invalidated after 600 seconds of inactivity. This is done for security reasons, as it is considered that after this amount of inactivity, the connection must end.
When we tried to connect after 10 minutes, using this cookie with the old sessionID, the response is an invalid SessionID or session expired.
Our partner suggested to delete the cookie after sending messages. But on the AS2 adapter configuration I see no option for cookie control.
Any ideas? Keep in mind that our partner would rarely change its setup.
With kind regards
Frank OpitzAm not sure but do AS2 adapters have a Cookie Option? Or are you talking about Http Keep Alive option?
Can you try to disable this option in the Receiver As2 adapter and give it a shot?
Regards
Bhavesh -
AS2 adapter-- Module tab configuration to call seeburger std mappings..!
Hi Experts,
Seeburger has been installed and i want to use AS2 adapter to make use the seeburger standard mappings.
When i opened the module tab, its been found that for
Sender AS2 adapter:
Module Name Module Key
localejbs/Seeburger/solution/as2 solutionid
localejbs/CallSapAdapter exit
Module configuration
_Modulekey ParameterName ParameterValue_
Solutionid Mappingname SEE_ORDERS_UN_...
can i use the above steps??
Is solutionid is enough to call the seeburger mapping?
or
do i need to use the Bic module to call the seeburger std mapping like below?
Module Name Module Key
localjbs/CallBicXIRaBean bic
Module configuration
Modulekey ParameterName Parameter Value
Bic Mappingname SEE_ORDERS_UN_...
Kindly let me know.
Regards
Krupa.HI,
For module configuration for As2 refer the below help.
Sender configuration:
AS2 identifier is the party identified which will be provided by the WAN network provider.
Under the party identifiere tab
Agency will be seeburger
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Refer the below thread which has the same discussion.
Re: Pls.. Help Needed.. Seeburger Mapping Names..!!
Thanks and Regrds,
Chirag -
AS2 Adapter EDI scenario - question
I am working on a EDI scenario, involving AS2 adapter.
Could anyone tell me any steps to be done on ABAP engine.
regHi Naveen,
follow the below steps:
1) First deploye the Std seeburger mapping provided by see burger on XI
2) If you are using the AS2 adapter then you have to install the AS2 server on XI server.
3) Once you install the std seeburger on SAP XI server you will see the AS2,X400,OFTPS,VAN adapter on XI ID.
5) You need to call the std mapping in the adapter module which does the conversion from EDI to XML and XML to EDI.
steps in IR and ID.
In IR:
You need to use the Standard XSD provided by Seeburger for different mesages like EDFACT ORDERS D96A etc in IR and other steps are similar which we do for the normal scenarios.
In ID:
This is the scenario for AS2
Seeburger has provided std mapping which need to be deployed on Xi server and will be used in XI adapter module tab for EDI-XML and XML-EDi conversion.
Example of mapping:
See_E2X_INVOIC_UN_D96A
See_E2X_INVOIC_UN_D99A
See_E2X_ORDERS_UN_D96A
See_E2X_OSTRPT_EAN_D96A.
1) After deploying mapping program.
We need to give the AS2ID in the party identifier tab,AS2ID that is entered here will be used for identifying the sender and receiver of the document.
1)The value of the Agency field must be Seeburger.
2)The value of the Schema field must be AS2ID.
Every partner is assigned the WAN no which is provided by the WAN service provider. That WAn no we need to configure in the party identifier tab
Configuration in adapter:
Under the party identifiere tab
Agency will be seeburger
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Sender AS2 adapter configuration:
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A which does the conversion of EDI-XML.
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
You can refer my thread reply:
Re: Pls.. Help Needed.. Seeburger Mapping Names..!!
Re: Seeburger AS2 adapter...
Re: AS2 Module tab.. Mapping Names for modified Standard Msg types ? ? BIC ??
AS2 adpater-- Configuration details for both SND and RCV.
AS2 Sender Adapter -- Need few details.
EDI-SEEberger-XI-IDOc-R/3
flow of the data from EDi to SAp r/3 using seeburger:
1) Data will be coming thorugh WAN or mailbox.
2) If its coming through WAN then every WAN provider will give the partner which is sending the data a partner number for indentification.
3) In your AS2 channel you need to configure the party and for that party you need to give the WAN number which is proivded for that partner. So it will run that configuration whenever that partner send the data.
4) In the adapter you have to give the mapping program name which does the conversion of EDI-XML and XML-EDI.
5) Once you XML is generated then it will be used in MM
6) At the receiver if its IDOC adapter then IDOC adapter will post the IDOC to R3 system.
Thnx
Chirag -
Dynamic Receiver file name in AS2 adapter
Hi Experts,
How to get dynamic receiver file name in AS2 adapter. We need receiver file name same as of sender file name.
We tried selecting dynamic attributes file name but we are getting followin error in CC.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Mandatory attribute dtAS2FileName is not present in XI message., Mandatory attribute dtAS2FileName is not present in XI message.
Thanks,
Harihi hari,
You can't do it manually. As both adapter are in different context.
You can go with UDF to slove ur problem.
Just extract the input file name using Dynamic configuration
Store that in some variable.
Use same name in the dynamic file name in AS2 receiver. Below code might be useful.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://seeburger.com/xi/common/dtAS2FileName", "DYNFILENAME");
conf.put(key,strfilename);
Thanks
Jai
Edited by: Jaideep Baid on Apr 9, 2010 9:16 AM -
Receiver AS2 Advantco Adapter Content type change
Hi All,
I am working on SFTP to As2(Advantco) scenario. We are sending the txt files to target.
As of now file is sent with content type application/xml. But target system is asking to change it to "application/octet-stream"
In the AS2 adapter guide, there is section 3.4.4.8. MIME Settings which talks about content type change.
Unfortunately i am not seeing that in the receiver channel.
does anyone know how to change the content type for AS2 channel?
Will standard adapter module work on third party adapter? like messageTransformBean
Thanks.This could be because of adapter metadata is not updated one?
>>> Yes. It's very much possible.
Will standard adapter module work on third party adapter? like messageTransformBean
>>> AFAIK - Advantco adapters does support MTB. -
AS2 adapter not visible in Receiver Communication Channel (Adapter Type)
Hi,
We wish to connect to our customer using AS2 adapter as the receiver communication channel.
We are unable to find the "AS2 adapter type in the in "adapter type" field. (Choose Adapter Metadata).
Our XI version is as following (NW04S_11_REL Service Pack 11).
Version
Service pack:
11
Release:
NW04S_11_REL
Is there add-on to be installed on XI or is there any activation required?
Thanks in Advance,
RehanSAP_BASIS
Release 700
Level 0011
Highest Support Package: SAPKB70011 -
Problem with CC Receiver with AS2 Adapter Seeburger
Hi,
I try to test the AS2 Adapter with Receiver channel y one server and Sender channel in second server, but in the Receiver channel, I have the error :
"MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2."
I find the error and I found the URL Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!! with the same problem, but I have the same configuration in the Party of the receiver and the Sender, the same AS2ID name, and try with the solution in the forum respect the Party name in the scenario of the Receiver, but don't work.
My scenario is send an IDOC from R/3 to a partner with the AS2 receiver channel.
Is my fisrt scenario with AS2 adapter. Somebody help me please with any example or with any idea about the solution to my problem?
Greetings,
HerveyI have resolved this problem, thanks.
Maybe you are looking for
-
I recently upated my itunes account to 10.6. I am using a relatively new PC running Windows 7. Previously Itunes had been working perfectly but since the update it freezes every time I try use Itunes. I have uninstalled and reinstalled Itunes but
-
I don't think this is a iDVD problem, but thought this forum is still the best place to look for some help. Just finished an iDVD project. I've got a slideshow built in Photo-to-Movie and iMovieHD, and am using iDVD '08 to encode & burn, along with t
-
Need to disable the Software Center or prevent it from being installed with the agent
Hi, I have done a client push out to all systems in my environment, including servers, in order to keep our systems patched. My server admin has requested that I remove the Software Center and only keep the agent. I would have thought I'd be able t
-
I don't think it exists on my S10.... at least I see NO options for a factory reinstall. But there is a folder for the system repair under program files. The computer came with the 160GB drive divided up into 3 partitions. C drive is 100GB, D drive i
-
Aftermarket Disk Utility for OS 10.4 TIGER
I am trying to find an aftermarket Disk Utility that will be compatable with TIGER 10.4.8. I have Norton but it does not work with OS 10.4, it did work with 10.2. Can someone respond with a Disk Utility that will work like Norton did? Defrag hard dri