Receiving Bill/Invoice 11 after the billing date

For the past few months I have been receiving my bill 10 to 11 days after the billing date listed in the invoice.  This month we received the bill on 7/20/15 and the billing date listed on the invoice was 7/9/15.  This leaves me with a very short window to pay the bill on time, especially when we are traveling and the bill arrives while we are away.  Seems to me 7 days to respond is unreasonable.  Is there some law or simple code that stipulates a reasonable time to pay?  The billing date implies theres a 20 day allowance but when the bill only arrives in the mail 10 to 12 days after the billing date seems to me something is amiss.  Its not like our state is another country.  Even snail mail doesnt take 10 to 12 days to arrive.  Is this a scheme to incentivise us to move to auto-pay?  If I wanted to auto-pay I would have done it years ago.  We only use comcast for our internet service and the way its been going not for much longer.  There's plenty of competion out there.  Is anyone else experiencing this problem?   

Hello L2lute,
I'll be more than happy to address your concerns. I will send you a private message to discuss your account concerns further.
Thank You!

Similar Messages

  • Not to allow to save the billing document in the back date if FI period clo

    Can anybody help me please. My FI period for october is closed. But there are still some open delivery documents in billing due list for October. So now let say on 7th december if i will make the billing documents by giving the date 30.11.2007 logically as FI period is closed it will allow to save the billing document but will not pass to accounting.
    So this normaly happening in my industry endusers are creating the billing documents in the back date even after the period close so all the documents come into VFX3.
    So can any body help me? Can we have any check if the FI period is closed for a perticular months if we will try to make the billing documents in the closed period it will not allow to generate the billing document rather saving the documents and blocking for accounting.
    Reggards.
    Laxmikanta Das.
    09958119889.

    Dear laxmikanta
    I also not come across the situation what you said and hence dont have much idea about authorization group.
    However, on going through the F1 help, it says
    <b>Procedure</b>
        If only a limited set of users is to be able to post in a particular
        posting period, proceed as follows:
                 o   Add the posting period authorization (authorization object
            F_BKPF_BUP) to the authorizations of the selected users. Assign an
            authorization group (e.g. '0001').
                  o   Enter the account type '+' for the posting period variant to which
            the restriction is to apply. Enter the period(s) whose use is to be
            restricted in the first period, those which are available to all
            users in the second period, and the authorization group (e.g.
            '0001') in the last column.
    <b>Examples</b>
        A posting period can be successively restricted. If, e.g. 10 users have
        the posting period authorization with authorization group '0001', and 3
        of these 10 users also with authorization group '0002'.
        If the period is only to be accessible to the 10 selected users the
        authorization group '0001' is entered in the posting period variant.
        Access can later be restricted to the remaining 3 users by entering
        '0002'.
    From the above, I feel your requirement can be met.
    Thanks
    G. Lakshmipathi

  • Not allow to save the billing document in the back date if FI period closed

    Hi ,
    We have a requirment in which end user should not be able to create the billing document if the billing date lies in FI posting period which has been closed.
    As of now the users are being able to create the billing documents even if the Billing date lies in the closed posting period but the sccounting document does not gets generated.
    Now we want to block the billing document creation as well.
    Please provide some pointers to the above scenaio. Thanks..

    hello,
    Has your query been solved.
    if not , here is the solution.
    go to the program RV60AFZZ. This is the exit for billing.
    In that there is a form called
    FORM userexit_number_range USING us_range_intern.
    in the form you have to write the code.
    variables to pass for the function module.
    DATA: lv_buper  LIKE  t009b-poper,
            lv_gjahr  LIKE  t009b-bdatj.
    CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
          EXPORTING
            i_date               = syst-datum
            i_periv              = 'V3'
         IMPORTING
           e_buper              = lv_buper
           e_gjahr              = lv_gjahr
    in lv_buper you will get the last posting period which is open ie the posting period month.
    based on lv_buper you get , you can write your validations.
    You have to remember that the posting period which u get is based on the fiscal year.
    hope that helps.
    reward if useful.
    cheers,
    Ravi Kiran.

  • Automatic delivery after the billing

    Can anyone tell me if there is a standard way to make an automatic delivery after the billing process.
    as my cycle will be Sales order->billing->automatic delivery->PGI.
    Thanks in advance.

    Hi
    Welcome to SCN Forum
    There is no standard way to make automatic delivery after the billing process.But you have to do some configurations firstly in VOV7  you have to change the billing relevance to Order related billing.In VOV8 also you have to check the box immediate delivery ,so that delivery document is created Then you run background job for billing as VF06. then you run a background job VL23..Please set the billing background job time before the delivery background job time
    NOTE : Kindly search in the forum before posting any thread
    Regards
    Srinath

  • I upgraded to the new IOS, but lost data and apps. When I try and restore the only backup I see is the one made AFTER the lost data. How can I access an older backup from the cloud?

    I upgraded to the new IOS, but lost data and apps. When I try and restore the only backup I see is the one it made AFTER the lost data. How can I access an older backup from the cloud?

    Why don't you talk to apple and find out if backup exists? That conversation with apple will stop your guessing.

  • So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date, is there a way to get it all back?

    So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date,and it also kept the notes from after the backup. The "reset all settings" option clearly says no loss of data or media, so I don't understand why some stuff got deleted. My question is, is there a way to get it back?

    If you still can find a recent backup listed in iTunes/Edit/Preferences/Devices, use this one to restore from.
    If there are no recent backups listed, your data is gone. Only if you included the iTunes backup folder into your computer backup routine, you could be able to restore this folder and find one of your latest backups listed again.
    iTunes: About iOS backups

  • Material availability date can not be after the delivery date

    Dear Experts,
    we are using the following scnario,
    1. Once the user creates the sales order, automatically system creates PO in the background.
    we have created Bapi program for creation of Background PO in SD User Exit.
    The following issue occurs in Prd, DS1, QS1 server, We have done Technical upgradation project, Now when we creates sales order automatically po created with error message of Material availablity date can not be after the delivery date. even sales order no also not updated in the PO.
    QAS server (without technical upgrade) i refered the same input parameter and used the same and create the sales order system generates PO automatically without error message.
    Does any one can through lights on this issue,
    Thanks and Best Regards,
    Muralidharan S

    Hi
    The dates are determined due to shipping and transportation scheduling settings. So check whether the shipping and transportation scheduling is being performed as per the cofiguration settings after Technical upgrade. Since the MAD date should not be after Delivery date but it seems that the dates are not determined properly.
    Also check the Transit  time, Loading time, Pick/Pack time and Lead time are retained as same as before the technical upgrade. Use the QAS server settings to validate the settings in other servers.
    Regards
    Rajkumar K

  • Extend End date after the end date has reached

    Hi gurus,
        We are using SRM5.0 on ECS with backend ECC5.0.
        We notice that after the end date of bid has reached even though there is a bid submitted by supplier , the purchaser still can extend the end date to a later date as long as he has not made the accept or reject choice.
        If it is the case, the purchaser can view the price after the end date reached and then extend the end date and maybe tell other supplier what the price the opponent has submitted. This is not allowed and should be penaltied.
        We just want to know how to avoid this in the term of system. Can we make the
    end date field unchangeable after the end date has reached? or any other solutions?
    Thank you in advance.
    Message was edited by:
            YE Wang

    Hi,
    As Teja and SAndeep mentioned,you can go for either the Approval or BADI approach.
    In case you are implementing the BADI,you can make the concerned fields grayed out so no changes are made but then this would mean that <b>no changes
    </b> can be done at all after the END date has been reached.
    In case of workflow,you can have you starting conditions in which you will compare the end date and the system date .If same,you can trigger  a Workflow for approval of any changes to be done further.So even if the changes are made,the chnages are approved by a higher authority.
    Another way would be to implement the "BBP_DOC_CHECK_BADI" to check whether the end date has been reached and then allow the user to do any changes.You can use the FM "BBP_PD_BID_GETDETAIL" to get the details of the BI and then check.In this case,you can additionally check for other parameters of the User like role,authorisation based on which he can make changes in exceptional cases.
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • I've an iMac with OS X 10.4.11. Sudden email problem: every received email has, after the header, 1 - 2 pages of technical data (e.g., Dkim-Signature, Domainkey-Signature, etc.) I don't know why this now happening, and I don't know how to get rid of it.

    I have an iMac using OS X 10.4.11. Beginning several days ago, all incoming emails have, after the usual email header and before the message appears, one to two pages of technical data (e.g., Dkim-Signature, Domainkey-Signature, Content-Transfer-Encoding, etc.). This is similar and more complex that the info one receives when an undeliverable email bounces back. I don't know where this stuff comes from, or how it came, and I don't know how to get rid of it. Any ideas? I'm something of a newbie to computers (um, what's a Tag?).

    That just sounds like the mail headers. Most people don't know (or care) about them so they're usually hidden.
    Check Mail -> Preferences -> Viewing -> Show header detail
    I'm guessing it's set to 'All'. Switch it to 'Default' or None as you prefer.

  • Create Third Party Invoice after the Inbound Delivery Creation

    Hello,
    We have a requirement in 3rd party order process, where create invoice with reference to 3rd party order/ items after the inbound delivery completion.
    Normally 3rd party invoice creation will be done after the MIRO transaction.
    For this, I have checked the Item category billing relevance & copy controls between OR & F2, TAS and I couldnt get any idea for this requirement.
    Please let me know if you have an Idea.
    Regards
    Suresh.

    dear friend,
    the following info would help:
    If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
    In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
    If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
    You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
    regards,

  • Payment Block removed or allow to make the payment after the due date

    Hi,
    Regarding Payment block, we have created one payment term with block indicator and assigned to some vendors. So each posting system will generate the entry with payment block, once the document crossed the due date (assume that 30days) system wants to allow to make the payment to the vendor without deleting or removing  the payment block. Is it possible.
    govind

    Hello,
    For this change, you need to develop a program and need to identify the age of 30 days invoices and remove payment block for those invoices. So 30 days aged invoices can clear.
    Logic: go to BSIK and find out ZFBDT of the document and deactivate the ZLSPR (Payment block).
    Or
    try to find out any functional module or user exit is available while clearing invoices. if available maintain the above logic.
    Regards,
    venkat

  • Cash discount calculated even after the due date in F110

    Hi Friends,
    Invoice and Credit memo is created with the reference to PO, but when the payment is made to the vendor through F110 the cash discount is calculated on the credit memo even though it has passed the due date.
    Let me know what else is remaining that has to be checked and corrected
    Regards
    Paddy

    Check the following configuration:  t-code FBZP -> All Company Codes -> double-click on the relevant company code to display the details. 
    In the "Cash discount and tolerances" section, I'm thinking that you'll find that the "Max.cash discount" check box is checked.  This check box tells F110 to always take the discount, even if the terms have expired.  If you uncheck the box, then F110 will only take the discount within terms.
    Regards,
    Shannon

  • Photos dont set right after the up date on screen

    after I dated 7.0.4 the screen photos do not fit the screen like they did before the up date...I tryed everything..they worked great before the up date for the ipad

    I did run disc utility off the install disc and ran disk repair on both the volume and permissions before running the verbose mode. Do you think it would make sense that I still get that corrupt mDNSResponder.plist file? Just curious.
    Unfortunately, the Disk Repair feature of the Disk Utility does not necessary "fix" corrupted .plist files ... so, yes, I would think that you could still have a corrupted mDNSResponder.plist file even after running it.
    Do you have any idea what that mDNSResponder.plist file may be and if it could be related to setting file sharing or turning off my firewall, both of which I did right before this problem?
    OS X uses the mDNSResponder process for both unicast DNS and Bonjour functions. Unicast DNS resolution is used to resolve hostnames like www.google.com. It would be related to file sharing as it would be necessary for local host name resolution.
    To boot off a clone, power-down your Mac. Plug in the clone drive, and then, power-up the Mac again. Your Mac should find and boot off the bootable clone drive.

  • HT4623 when i type anything out now after the up date it types slow and is unresponsive

    after the new update typing anything ( email, notes anything) my iphone is slow to type and will do 4 letters at a time stop type more letters it acts like it needs time to think what its doing

    The 4th generation iPod Touch can not be upgraded beyond 6.1.5.

  • I cancelled my creative cloud membership on the 29th of janurary but I've just been sent an invoice for the bill of this years payment. Luckily there isn't enough money in my bank account for it to go through. But why am I still being billed?

    I don't know why Im being billed for it when i spoke to the online service team he told me that i wouldn't be billed for this year and now they are trying to charge me for it. I'm a student and I don't have that kind of money to pay for it so I'm not keeping anything in my card account to make sure that it can't be taken out. How do I tell them again that I'm not paying for it anymore
    Seriously annoyed

    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -start here https://forums.adobe.com/thread/1703848
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    --and two links which may provide more details, if the above links don't help you
    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

Maybe you are looking for