Photos dont set right after the up date on screen

after I dated 7.0.4 the screen photos do not fit the screen like they did before the up date...I tryed everything..they worked great before the up date for the ipad

I did run disc utility off the install disc and ran disk repair on both the volume and permissions before running the verbose mode. Do you think it would make sense that I still get that corrupt mDNSResponder.plist file? Just curious.
Unfortunately, the Disk Repair feature of the Disk Utility does not necessary "fix" corrupted .plist files ... so, yes, I would think that you could still have a corrupted mDNSResponder.plist file even after running it.
Do you have any idea what that mDNSResponder.plist file may be and if it could be related to setting file sharing or turning off my firewall, both of which I did right before this problem?
OS X uses the mDNSResponder process for both unicast DNS and Bonjour functions. Unicast DNS resolution is used to resolve hostnames like www.google.com. It would be related to file sharing as it would be necessary for local host name resolution.
To boot off a clone, power-down your Mac. Plug in the clone drive, and then, power-up the Mac again. Your Mac should find and boot off the bootable clone drive.

Similar Messages

So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date, is there a way to get it all back?

So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date,and it also kept the notes from after the backup. The "reset all settings" option clearly says no loss of data or media, so I don't understand why some stuff got deleted. My question is, is there a way to get it back?

If you still can find a recent backup listed in iTunes/Edit/Preferences/Devices, use this one to restore from.
If there are no recent backups listed, your data is gone. Only if you included the iTunes backup folder into your computer backup routine, you could be able to restore this folder and find one of your latest backups listed again.
iTunes: About iOS backups

My iMac will not boot up. It's stuck in the black screen right after the apple logo. I ow

I Own a brand new iMac 5k with retina display. It gets stuck in the black screen right after the apple logo And all of a sudden shuts down.

You can return a new Mac within 14 days of purchase.
A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare or take it to the Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
   Reset PRAM.   http://support.apple.com/kb/PH18761
Reset SMC.     http://support.apple.com/kb/HT3964
Choose the appropriate method.
   Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best.

Faces in Photos showed up blank after the upgrades

Faces in Photos showed up blank after the upgrades (no labeled faces at all) with the suggested faces mostly full of 100's of blank white circles. I used to have about 50 faces labeled with about 2500 photos. Now I have no labeled faces on top of page (completely blank) and only 9 face suggestions on the bottom. Photos also runs very slowly compared to iPhoto. I tried re-installing and re-upgrading and have gotten the same results. I'm using a Mac Pro (2009), OS 10.10.3, 2.66 GHz Quad-Core Intel Xeon, 16 GB 1066 MHz DDR3 ECC, 7 GB storage. Any help will be appreciated and even if I have to delete the Face's database and start all over, where do I find that database or file to delete?

1. Copy and paste is a very good way of moving chunks of text around, however, it's not really good for moving a Library containing many thousands of files. Drag and Drop is rather more reliable.
it comes up with a black circle and a "!" image.
2. The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I upgraded to the new IOS, but lost data and apps. When I try and restore the only backup I see is the one made AFTER the lost data. How can I access an older backup from the cloud?

I upgraded to the new IOS, but lost data and apps. When I try and restore the only backup I see is the one it made AFTER the lost data. How can I access an older backup from the cloud?

Why don't you talk to apple and find out if backup exists? That conversation with apple will stop your guessing.

Receiving Bill/Invoice 11 after the billing date

For the past few months I have been receiving my bill 10 to 11 days after the billing date listed in the invoice. This month we received the bill on 7/20/15 and the billing date listed on the invoice was 7/9/15. This leaves me with a very short window to pay the bill on time, especially when we are traveling and the bill arrives while we are away. Seems to me 7 days to respond is unreasonable. Is there some law or simple code that stipulates a reasonable time to pay? The billing date implies theres a 20 day allowance but when the bill only arrives in the mail 10 to 12 days after the billing date seems to me something is amiss. Its not like our state is another country. Even snail mail doesnt take 10 to 12 days to arrive. Is this a scheme to incentivise us to move to auto-pay? If I wanted to auto-pay I would have done it years ago. We only use comcast for our internet service and the way its been going not for much longer. There's plenty of competion out there. Is anyone else experiencing this problem?

Hello L2lute,
I'll be more than happy to address your concerns. I will send you a private message to discuss your account concerns further.
Thank You!

Material availability date can not be after the delivery date

Dear Experts,
we are using the following scnario,
1. Once the user creates the sales order, automatically system creates PO in the background.
we have created Bapi program for creation of Background PO in SD User Exit.
The following issue occurs in Prd, DS1, QS1 server, We have done Technical upgradation project, Now when we creates sales order automatically po created with error message of Material availablity date can not be after the delivery date. even sales order no also not updated in the PO.
QAS server (without technical upgrade) i refered the same input parameter and used the same and create the sales order system generates PO automatically without error message.
Does any one can through lights on this issue,
Thanks and Best Regards,
Muralidharan S

Hi
The dates are determined due to shipping and transportation scheduling settings. So check whether the shipping and transportation scheduling is being performed as per the cofiguration settings after Technical upgrade. Since the MAD date should not be after Delivery date but it seems that the dates are not determined properly.
Also check the Transit time, Loading time, Pick/Pack time and Lead time are retained as same as before the technical upgrade. Use the QAS server settings to validate the settings in other servers.
Regards
Rajkumar K

I paid my order right after the confirmation came in, but i don't get a confirmation that i paid, and i paid it about one and a half week ago, what can i do?

I paid my order right after the confirmation came in, but i don't get a confirmation that i paid, and i paid it about one and a half week ago, what can i do?

Download from Download CS5 products
Install then enter your serial number.

Extend End date after the end date has reached

Hi gurus,
    We are using SRM5.0 on ECS with backend ECC5.0.
    We notice that after the end date of bid has reached even though there is a bid submitted by supplier , the purchaser still can extend the end date to a later date as long as he has not made the accept or reject choice.
    If it is the case, the purchaser can view the price after the end date reached and then extend the end date and maybe tell other supplier what the price the opponent has submitted. This is not allowed and should be penaltied.
    We just want to know how to avoid this in the term of system. Can we make the
end date field unchangeable after the end date has reached? or any other solutions?
Thank you in advance.
Message was edited by:
        YE Wang

Hi,
As Teja and SAndeep mentioned,you can go for either the Approval or BADI approach.
In case you are implementing the BADI,you can make the concerned fields grayed out so no changes are made but then this would mean that <b>no changes
</b> can be done at all after the END date has been reached.
In case of workflow,you can have you starting conditions in which you will compare the end date and the system date .If same,you can trigger a Workflow for approval of any changes to be done further.So even if the changes are made,the chnages are approved by a higher authority.
Another way would be to implement the "BBP_DOC_CHECK_BADI" to check whether the end date has been reached and then allow the user to do any changes.You can use the FM "BBP_PD_BID_GETDETAIL" to get the details of the BI and then check.In this case,you can additionally check for other parameters of the User like role,authorisation based on which he can make changes in exceptional cases.
BR,
Disha.
<b>Pls reward points for useful answers.</b>

All I get is a grey screen with no drives when I hit option right after the chime.

I installed windows 7 on my MacBook Pro through bootcamp. Each OS boots up fine if direct it from the bootcamp control panel... however, if I use the option button right after the chime, all that shows up is a grey screen.
Info: I just installed windows 7 as said and am using vmware to run the bootcamp partition from within Mac OS... Not sure if this had/has an effect on it. Thanks!

Hi David,
You may want to post in the Boot Camp forum to see if this is normal:
https://discussions.apple.com/community/windows_software/boot_camp

So i was updating my white ipod touch 4th gen and i restarted the ipod while it was half way done. Then after it restarted it would crash right after the apple sign...it would turn white, red,purple,green...any ideas of how to fix it??

So i was updating my white ipod touch 4th gen and i restarted the ipod while it was half way done. Then after it restarted it would crash right after the apple sign...it would turn white, red,purple,green...any ideas of how to fix it??

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
When it says restore the iPid via recovery mode, try placing n recovery mode and restoring several times.

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

I have a dead thunder bug, right in the middle of my screen and it's dead!!

I have a dead thunder bug, right in the middle of my screen and it's dead!! It's so annoying - what can I do? How the **** did it get in there.

Uhm. It crawled in there? Strange.
If your laptop is still under warranty then bring it to an apple store. This way they will take it apart for you and you wont be voiding your warranty.
If it's not under warranty, you could bring/call a apple store and see if they will do it for free.

How do I set all photos in a project to the same date (rather than simply time-shifting)?

I have a bunch of old scanned photos in Aperture (current version - 3.5.1), and am trying to tidy up the metadata, especially the dates.
This is turning out to be quite a task, as the date gaps between scans are all over the place. For example, in one project I might have photos scanned between 2004 and 2007 that all took place on one day in 1999.
This means the native "adjust date and time" function in the metadata menu doesn't work, as it is a little too clever in its timeshifting. If I highliht the whole project and change it all to 1 June 1999, the 2004 shots get changed to that date but the 2007 scans are dated 2002, with Aperture "cleverly" preserving the inaccurate three year gap in the original scans' metadata.
This is making the process of fixing my data far more arduous than it needs to be.
I feel like my situation can't be that unusual, and their must be a way to override this behaviour. I'm not fussy about preserving logical time gaps between shots but I'd like them to have the right year and month (so a "dumb" solution that gave them all idntical date and times would be fine).
Can anayone help? Thanks in advance!

What is your Aperture version?
If it is compatible with iPhoto, open the Aperture library in iPhoto and use iPhoto's Batch Change to adjust the date of your scans: (File > Open Library in iPhoto)
In iPhoto select the photos in the event and go to the main menu bar:
Photos > Batch Change > Set Date:
Select the initial date and time of your photos and a very small gap, e.g. 1 second. All photos will set to the same date, stepped by one second to preserve their time order.
Afterwards switch back to Aperture using "File > Open Library in Aperture).
this works very well with Aperture 3.5.1 and iPhoto 9.5.1.
-- Léonie

Blue Screen right after the start up logo

Hi. My first post - I've looked at other blue screen posts on here, but mines I think might be simplier to identify compared to other ones I seen involving flickering off the apple menus etc. (fingers crossed)
Last night I was archiving a lot of mpegs (and other video files archiving through winzip) to save room so that I'd enough room to allow the use of my new Lacie DVD rewriter (as it needs a lot of free space to use) after half an hour of archiving, I decided to watch a DVD instead and was watching on the DVD Player, once I got pretty tired, turned it off via the power instead of actually exiting the DVD player then going to "shut down" (lazyness on my part).....
This afternoon I go to turn on my Mac - I get the "Mac OX" start up with the blue progress bar at the start - no problems there, everything seems to be OK... Then after the Mac start up logo has gone, the whole screen is blue... I can still move around the mouse etc.... I have tried a restart with the command R+P etc... and tried to hold down the "C" button while having the instalation disc in after a restart to use one of the utility check things on the disc but it doesn't seem to even launch the disc.. It just starts as normal with the mac loading logo thing,, then straight onto the blue screen.... I have a lot of CD lists, and a lot of crucial info I need so replacing it isn't really an option although it would be no trouble if I didnt have anything needed on there.. Any help is greatly appreciated

I solved the problem yesterday (well a friend of mine did)
1) He started up the Mac Mini WITHOUT the install disc in, and as the Mac OX launch screen came up - he inserted the disc then
2) This allowed the reader to read it at this point (which is more ideal and suited) rather than the start of the power up..
3) You will hear the reader reading the disc, making noise etc. by then you push the "C" button, and the options came up for picking a language, once I did it went on to the usual utilys on the disc 1 installation disc
4) Unfortunatly I re-installed the whole lot (whcih took around 20 mins to complete) which earesed all the data
5) Good thing though was it worked after it, all fresh, and saved me a very high charge of 95.0GBP to fix it, and possibly more for any kind of data retrieval I wished to have saved
ps) it might also work by pushing the "C" without the disc. But the way I was doing it before was that I put the disc in, switched it off, and restarted with having the disc in right away to think it was the more precise way to perform what was needed, however it was not

Photos dont set right after the up date on screen

Similar Messages

Maybe you are looking for