Receiving DOCX files

When I receive a .docx file, either through email or as a download from a course management system, OS-X seems to decide to name the file with .docx.zip as the extension. If I simply remove the .zip ending, then Pages will open the file just fine. Is there any way I can convince OS-X to stop appending the .zip? It is annoying to have to rename the files each time.

Thanks for taking the time to try to help me with this.
My primary source for this file is from Blackboard. I've tried downloading it several ways. The normal click-to-download causes Safari to not only add the .zip, but to unzip it and turn it into a folder that I can't do a thing with. If I control-click on the file link, I can "download as" and actually see that the file name is .docx [exhibit A that this is NOT really a zip file]... but by the time it shows up in the download window, Safari has changed that to .docx.zip (if I then look at it in Finder and change the file name to .docx then Pages opens the file just fine [exhibit B, Pages won't open a real zip file, will it?]).
I don't really think that Blackboard is the culprit, though (although it is a "usual suspect"), because I have also emailed the .docx file (that opens just fine on my computer) to myself and it arrives with .docx.zip if I send it using Safari (to access webmail.nku.edu - a MicroSoft Outlook Web Access way into my university email account)... if I send it through the same email link using FireFox, it arrives as a .docx that opens just fine.
My guess is that in the hidden bits of Safari there is a table of "known" file extensions, which hasn't been updated to include .docx (or perhaps some other part of the file type information hidden in the files). This would also fit with a discussion on the Safari threads, blaming Yahoo Mail for similar problems with Safari.

Similar Messages

  • How to make a stationery out of .doc or .docx file?

    Hi,
    I stumbled upon a website that has some nice stationery, in .doc format. and since there few free pre made stationery available for Mail.app, at least to my knowledge, because I think I almost downloaded every free stationery available out there that could be easily found via Google. I decided to download some of these .doc stationeries and try to put them in Mail.app, but first I had to convert them into .html format. so here is what I've already tried and did not work:
    first I tried opening them in TextEdit, which supports .doc out of the box, only to find out that the pictures in the documents are gone to thin air. I tried saving it and then opening it with something else like Open Office, but the pictures were permanently gone.
    then I tried opening the original documents directly in Open Office, you guessed right If you said they will look screwed, and they were, and tried to save them as html, they were screwed even more.
    so I did a bit of research and found out that I could use Google Docs in order to convert the documents, I uploaded them into my Google docs and then tried to open them with it, but found it that Google docs can't handle the pictures (specially background pictures) either. as a result I did more searching to find a document converter and here is what I found:
    I found a few online service to convert these documents:
    http://www.freefileconvert.com/ was pretty good to convert the files into an .odt format. at first I thought yes I got the solution, now I can simply convert it to html using Open Office, but unfortunately, when I saved the document in html format and checked it in Safari to see how does it look, as If I would have done the same in MS Office with the original format, it looked pretty much screwed .
    So I continued to look and I found a few other online services one of them asked me to pay a fee, I skipped to the other one which was http://docx-converter.com/. unfortunately the website wasn't functioning properly I think, at least for me (maybe someone out there has succeeded using it, I don't know.) and it didn't send me anything.
    Finally I found http://www.zamzar.com/ that could convert .doc or .docx documents into html, or at least that is what it claims to do so, I tried it, and after I received the file via email, I found out it only contains a bmp image of the document's background. So much for the online conversion services!
    But I decided I would give it a last shot using MS Office online, so I opened up my old Windows Live mail and went into my Skydrive, I uploaded the documents and tried saving it as html, but there were no save as html (after all an online copy of MS Office should have some limitations, otherwise few people will be willing to buy a Desktop version) but this didn't made me disappointed, since I already knew, that Neither Office Word can make a clear conversion, so I tried something different, while I was in Safari looking at the document in online MS office, I saved the page as Web Archives, then I opened the file with TextEdit, and after deleting useless links and pictures, I finally managed to get a clear document with everything that supposed to be in it. At this point I only need to know how to make use of this document to create a stationery with this raw file which is in Web Archive format. any ideas?
    null

    I'm a total idiot! How did I overlook http://www.zamzar.com/ functions? I think I might have mistakenly chosen convert to BMP instead of html. I tried it and the result was very good.
    OK I finally found a good solution for this problem, so everyone out there that has the same problem, here is what I did:
    1. OK if you have some .doc and .docx file formats and you want to convert them into something like .html or .odt, without having to reedit the code or getting a screwed document, use http://www.freefileconvert.com/ in order to convert them into .odt so they would look as they do in MS office just go to the website and upload your documents then choose .odt, then click convert, after a few moments you will get a link to download your .odt files. you can use and play around with your document in Open Office, I have tested it and it's really good.
    2. Or if you want to convert them into .html with a clean code, and all the elements in it, simply go to http://www.zamzar.com/ and then ulpoad your documents, choose .html and enter your email address, you will have your .html files zipped and sent right in your inbox, then you could use Kompozer like me, or any other html editor, to make a template out of it. I tried it and the result was nice, now I have a bunch of nice html files that I can use to make templates and email stationery.

  • Cannot use Word2008 doc/docx file to Create PDF (single or multiple)

    Attempting to Create PDF from File >> Single file or Multiple File>> selection of MS-Word2008 .docx or 97-compatible .doc file will error out.
    Adobe has replicated the problem of receiving the same exact error message with Word2008(mac) doc/docx file as input for Acrobat Pro
    fessional 9 to Create PDF. Possible cause is the absence of PDFMaker for Ver9.
    No solution exists.
    Due to resident PDF functionalities of OSX Snow Leopard built into Preview and Print, Acrobat Professional 9 is
    a redundant product for all MacOSX Snow Leopard computers. Only useful functionaity of Acrobat is Create Portfolio and possibly Reduce File Size.
    The non-Universal Automator allows for the creation of PDF through PDF drop down menu available from Word>>Print Dialog which allows for Acrobat PDF option to choose Press/High-Quality/Smallest-File/Standard that can be modified through Distiller.
    Conclusion: Acrobat Professional 9 for MacOSX Snow Leopard as a stand-alone product is Obsolete - Dead on Arrival (DOA). Still useful when used in conjunction with bundled CS4 Suites.

    There is much Acrobat can do once the PDF create created.
    Go to Print Menu and save as Postscript file then drop on Acrobat.

  • Save a doc/docx file as dotx

    In C++/MFC using MS word controller (and not Open xml) how to Save a doc/docx file as dotx??
    I am opening the .doc/docxx file, and saving it as .dotx. It saves, but if tried to open when double clicking it, it is says something which means, incorrect file format. Is there a way around?
    STDMETHODIMP WordClass::OpenDocument2(BSTR templateFilepath, VARIANT_BOOL readOnly, VARIANT_BOOL visible)
        try
            // Make sure we have a valid MSWordApp object.
            if(m_pWordApp == NULL)
            // Make sure a document is not already open.
            if(m_pWordDoc != NULL)
            CComVariant varFilenameOpen(templateFilepath);
            m_pWordDoc = m_pWordApp->Documents->Add(&varFilenameOpen,
                                       &vtMissing,
                                        &vtMissing,
                                        &vtMissing);
            // Setup the event source sinks so that we will receive sink messages from MSWord.
            DocumentSink::DispEventAdvise(m_pWordDoc);
            if (readOnly == VARIANT_TRUE)
                CComVariant password((long)GetTickCount());
                password.ChangeType(VT_BSTR);
                m_pWordDoc->Protect(MSWORD::wdAllowOnlyComments,    //enum WdProtectionType
                                    &vtMissing,                      
     // NoReset.
                                    &password);                      
     // Password.
        catch(_com_error &err)
        return(S_OK);
    STDMETHODIMP CMSWordController::SaveDocumentAs(BSTR newDocumentFilename)
        try
            // Make sure we have a valid MSWordApp object.
            if(m_pWordApp == NULL)
            // Make sure a document is open.
            if(m_pWordDoc == NULL)
            // Wrap the arguments into Variants.
            CComVariant varFilename(newDocumentFilename);
            // Save the document.
            m_pWordDoc->SaveAs(    &varFilename,        // New Filename
                                &vtMissing,            // Document Format
                                &vtMissing,            // LockComments
                                &vtMissing,            // Password
                                &m_CovFalse,        // AddToRecentFiles
                                &vtMissing,            // WritePassword
                                &vtMissing,            // ReadOnlyRecommended
                                &vtMissing,            // EmbedTrueTypeFonts
                                &vtMissing,            // SaveNativePictureFormat
                                &vtMissing,            // SaveFormsData
                                &vtMissing);        // SaveAsAOCELetter
        catch(_com_error &err)
        return(S_OK);
    I called OpenDocument2(...) and then SaveDocumentAs(...).
            

    This is the code I am using...
    // Wrap the arguments into Variants.
    CComVariant varFilename(newDocumentFilename);
    // "C:\\abc.dotx" CComVariant varFormat(MSWORD::WdSaveFormat::wdFormatTemplate);
    // Save the document.
    m_pWordDoc->SaveAs2( &varFilename, // New Filename
    &varFormat, // Document Format
    &vtMissing, // LockComments
    &vtMissing, // Password
    &m_CovFalse, // AddToRecentFiles
    &vtMissing, // WritePassword
    &vtMissing, // ReadOnlyRecommended
    &vtMissing, // EmbedTrueTypeFonts
    &vtMissing, // SaveNativePictureFormat
    &vtMissing, // SaveFormsData
    &vtMissing, // SaveAsAOCELetter
    &vtMissing, // Encoding
    &vtMissing, // INsertLineBreaks
    &vtMissing, // AllowSubstitutions
    &vtMissing, // LineEnding
    &vtMissing, // AddBiDiMarks
    &vtMissing); // CompatibilityMode
    I am getting an exception, Incompatible File type and File extension.

  • Can someone help?  I am unable to open MS Word 2011 .docx files after installing LION OS.

    I recently had a hard drive failure on my iMac.  A new 1TB hard drive was installed along with OS X 10.6.8.  Since restoring files from Time Machine, I am unable to open .docx files using MS Word 2011.  I receive a 'convert file' dialog box.  I can open .doc files that were restored from Time Machine and any new files in .docx format.  I cannot open any .docx files restored from Time Machine.   Has anyone else ran into this problem and do you have a workaround or solution?
    thanks.

    Might look into NeoOffice...
    http://www.neooffice.org/
    Or Open Office...
    http://www.openoffice.org/download/index.html
    There are older versions for 10.4.11 available...
    http://www.neooffice.org/neojava/en/download.php#download
    http://download.openoffice.org/other.html

  • Why can't I read a .docx file?

    I have an iPad running iOS 5.0.1 and I just received an email with a .docx attached.  Whan I tap on it, it tries to open only to get a message that it can not read this kind of file.  It can however read a .doc.  What's up with that?

    Gar Benedick wrote:
    Asatoran,
    Thank you!  However, I am not using an app, I am using the latest version of Apple Mail and as I stated, I can read a .doc file that is sent to me, just not a .docx file.  If .docx started back in '07, why hasn't this been updated, or is it a Microsoft licensing thing?  Preview on my MBP can read .docx file, why not Mail?
    As Dave and Gilh said, you should be able to open DOCX.  (And I tested an XLSX as well) on iOS5.0.1, which I did on my iPad1.
    The file formats were introduced in Office2007, but it took a while for developers to update their apps to handle the Microsoft proprietary format.  And even now, they can't always open every document perfectly.  (i.e.: tables are not aligned properly.  Macros don't work.)
    So in addition to what Dave said about resetting your iPad, also try opening a different DOCX file.  Preferably a "simple" file.  (Just one or two words.)  No macros either.

  • Inability to open an docx file sent as an email attachment

    After receiving an email with a docx file attachment, I was unable to open it. The error message says, Adobe Reader cannot open ....docx either because it is not a supported file type or the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). This is a very important document and more may follow soon. Should I uninstall Adobe Reader, then try to open the document ansd save it to the computer before reinstalling Adobe?

    If it isn't found in Word, you must be doing File > Open wrong.
    I'm not asking you to choose it from the list of recent files, but to choose OPEN, then find the folder with the file in it, and select the file. If the file isn't shown, then it isn't a DOCX file at all.
    When I write File > Open, in Word this means Choose the Open command from the File tab menu . The File Open dialog box is then shown.

  • Microsoft Word won't open .docx files.

    I cannot get Microsoft Word to open .docx files.

    Since it's happening in Guest, it's possible the keyboard plist is also affecting Guest, but normally plist files are only for a specific user. However since this is hardware, I'm not sure.
    Let's try some general troubleshooting steps:
    Boot into the Recovery Drive by holding down Command R when restarting.
    Run Repair Drive and Repair Permissions using Disk Utility in Recovery.
    See steps here to reset YOUR permissions while in Recovery drive.**
    Restart
    Download and run the combo updater to refresh your OS X files.
    OS X Mavericks 10.9.4 Update (Combo)
    http://support.apple.com/kb/DL1755
    If you still see the problem after this, download EtreCheck and paste results here for help troubleshooting.
    http://www.etresoft.com/etrecheck
    **(Fair disclosure: NeedHelp4Mac is my site. I may receive some form of compensation, financial or otherwise, from my recommendation or link.)

  • Unable to download a docx file

    will this PDF sofware download a Docx file?

    Hi Charles,
    ExportPDF will take PDF's and convert them to various files depending on the level of service you have purchased.
    Are you receiving a specific error message while attempting the conversion?
    Let me know how I can assist!
    Looking forward to hearing back from you.
    Regards, Stacy

  • Converting .docx files from Ipad air to .doc files on imac

    I have an imac running 10.6.8 with Word:Mac v.X.  I have been operating the XML converter to change docx files to doc files with no problems,--until now.  I received a docx file created on an ipad.  I put it through the converter but when I opened it, it looked like a picture file and most of the document was missing.  I have tried various methods, including itunes, but the results are the same.  The only way I have found successful is to send the document to my husband's newer word and have him save it as a doc file and send it back to me.  Sending it back as a docx was not successful. Are there any simpler ways to convert these kinds of docx files?  Or is my system becoming a dinosaur?  Thanks.
    iMac (20-inch Early 2008), Mac OS X (10.6.8), Word:Mac version X

    Word version X is extremely old. You're going to find yourself making these kind of elaborate workarounds just to get files to open with it. I would strongly recommend that you upgrade to a newer Word (ie, the 2011 version) - that is, if you MUST use Word. If you just want an application that will work with (open and write) Word files, try LibreOffice, which is free.
    Matt

  • Problem with .docx files and Office 2004

    After the upgrade to Snow Leopard, I now am receiving a message "There is not enough memory or disk space to convert." when I try to open a Office 2007/2008 docx file. The error does not happen on all docx files, but only on files over 100kb. The same files that do not work now, all worked prior to upgrading to Snow Leopard. I am using a fully patched Office 2004 (11.5) in addition to the open XML compatibility software 1.1.1 from Microsoft. I have removed all error and duplicate fonts and repaired disk permissions.
    I have looked on both Apple and Microsoft for an answer, but nothing except Microsoft claiming Office 2008 will work seamlessly with Snow Leopard.

    I just came across this problem too. Very frustrating. I just got this new MacBook Pro last week (so I'm using Snow Leopard too). I installed Office 2004, updated it to 11.5, and installed the open XML conversion software, but no dice. I absolutely should have plenty of memory and disk space to do any docx conversion.
    Also, I'm only trying to convert a 20KB docx file, so large file size isn't an issue here. And my copy of Office 2004 is totally legit, in case that's a question.
    I really need to be able to open docx files for work, so this is a real problem for me. Help me, Apple-wan Kenobi!
    Message was edited by: juliamontgomery

  • Corrupted .docx file. Word 2007. Can't open the document. Tags mismatch. Help?

    The Office Open XML file *.docx cannot be opened because there are problems with the contents.
    Details: The name at the end tag of the element must match the element type in the start tag.
    Location: Part: /word/document.xml, Line: 2, Column: 3487212
    Hmm, I guess I should give some background info and what I've tried so far, right?
    The document is in word 2007, Windows 7. Last night, I was in a hurry, and got a lot of things open. I was opening the document to do a few quick spontaneous revisions, but it was so laggy and I was late for an appointment, so I was feeling panicky
    and frustrated. In hindsight, it probably wasn't the best option to just force shut the PC down cause word stopped responding in the middle of opening the document. Still, while I'm no Sherlock, I knew stopping it while it's in the middle of saving the document
    would bebad, I didn't think stopping it while opening the document (and not really modifying the document at all, at least that was what I thought before), could have drastic consequences! The document's quite
    large, a few hundred words, and about 500 or so pages. It's this really big project I was doing at work, for months now really, and because it's somewhat business confidential in nature, I can't exactly share it freely, or I would've uploaded a copy, sorry.
    Anyway, I woke up this morning and opened it, and the error came up. By the way, the document was saved in a 2TB external hard with a few disk errors in the past, if that helps, even if I'm pretty much sure its not a problem with the hard. The error
    came up... and yeah. I first made a copy, which I've been trying everything on, in case I do end up making things worse. I have no previous versions of it, just a relatively very old backup. Anything less than 80% recovery would set me back weeks with a wage
    cut. The good news is that I was able to open the document in WordPad, managing to recover the first 287 pages (131,543 words), with no errors or data loss, and saved it in a separate file. Apparently, according to information I obtained later, MSWord tends
    to not open at all when it encounters an error, but Wordpad tends to stop reading the rest of the code once it encounters an error. So, naturally, I assumed (so correct me if I'm wrong), that behind a few sentences I might lose due to the error, the rest could
    also be salvageable. I then looked up the problem all over the internet. Read a microsoft article on troubleshooting/recovering corrupted documents (Open & Repair, Draft Mode, Creating Link, Recover text from any file converter, etc). No dice.
    I first saw a similar question on answers.microsoft, and tried to use Tony Jollan's Rebuilder, macros enabled and all. Sadly, no luck.
    I managed to make my first breakthrough when I found out that .docx was just a .zip file, and could be renamed as such, with the document.xml extracted and manually fixed using an XML editor (not that I knew how to do that, but I was desperate and
    willing to learn). So, made another copy, changed extensions, and tried to specifically extract the document.xml. I believe that it is the main body text, right? That is the only thing really necessary for me, since everything I've done so far is entirely
    spartan, with no fancy fonts, formatting, header/footer/notes, media objects, formulas, tables, bullet points, numbered lists, etc. All pure sans-serif text, with some Japanese Kanji thrown in. 500 pages of pure text.
    I then hit a snag, when WinRAR encountered an error on extracting document.xml, stating that "CRC failed in word\document.xml. The file is corrupt". So I tried to fix this using several ZIP repair programs and stuff. Nothing worked. At
    least not so far. Managed to extract an incomplete version of document.xml using WinRAR's 'Keep Broken Files' option when extracting. The extracted
    document.xml came up to 3.31 MB while the original in archive is 7.53 MB. Viewed it in the Windows XML Editor which opened up the text in Internet Explorer, a jumble of text with no line breaks or paragraphs. Still, it actually extracted a few pages less than
    the open-using-Wordpad method tried earlier. So trying to fix the archive again...
    So I decided to give up the manual route for the meantime and focus on readymade solutions. I came across yet another microsoft article, but this one was at least more relevant than the last. It had this auto FixMe thing. I ran it, didn't
    work. Apparently, as I found out later, "This fix will work for one specific tag error where there are equations and graphics in the same paragraph AND Office 2010 SP1 has not been applied."
    Tried several (read: dozens) corrupt Word recovery software, from freeware to pro trials, to varying degrees of effect, although unsuccessful
    in goal. Some failed to read it, saying it was too corrupted for them to handle, the best managed to recover about three-pages-worth less data compared to the Wordpad method. So yeah, anybody with a similar problem, always open it with wordpad first and recover
    what you can. That doesn't mean I'm giving up though.
    So here I am, tearing my hair out in frustration. Whew, I feel like I told you guys my life story. I guess worst case scenario, I report this to my boss, so I personally or from the company, I/we'll hire a team of professionals to deal with it.
    But that's not an ideal scenario. It's gonna be out of my salary either way (the company has a firm policy of 'You reap what you sow'), along with a wage cut for making such an amateurish mistake even with continuous reminders to back it up every two sentences,
    so I'd rather avoid that.
    I'm currently looking to see whether there's a way to recover a previous version of an overwritten document somehow using a third-party software or something. (I didn't have Windows Backup enabled, so no previous version on Windows). So far, no
    autosaved documents on MSWord AutoRecover, even though I have it enabled set to every 3 mins (or maybe I'm just not seeing it since I'm trying to look for it manually?). Or are the temporary files wiped on shutdown? I don't have 'Always save backup copy' option
    enabled on word either.
    So yeah, an auto fix, or a lengthy answer detailing what exactly I should do (from the very very basics), or a link to a site with such info, would be much appreciated. Seriously :D
    Please. Thanks for at least making an effort :)

    When a Word document file is corrupted, then you can try several methods to recover it:
    1. First of all, you can try the recovery function integrated with Microsoft Word, as follows:
    1) On the File menu, click Open.
    2) In the Look in list, click the drive, folder, or Internet location that contains the file that you want to open.
    3) In the folder list, locate and open the folder that contains the file.
    4) Select the file that you want to recover.
    5) Click the arrow next to the Open button, and then click Open and Repair.
    You may find more information about this at:
    http://office.microsoft.com/en-us/word-help/recover-the-text-from-a-damaged-document-HP005189610.aspx (for Word 2003)
    http://support.microsoft.com/kb/893672/en-us (for Word 2007/2010/2013)
    2. If you have multiple corrupt Word documents, then you can use the VBA macro provided in article
    http://support.microsoft.com/kb/893672/en-us so that all the files will be opened in "Open and Repair" option automatically.
    3. There are also free tools from third-parties that can open and read Microsoft Word documents, for example,
    3.1 OpenOffice at http://www.openoffice.org. This is a very famous open source project that is designed to support Office file formats, including Word documents. The software can run under Windows.
    3.2 LibreOffice at http://www.LibreOffice.org. Another free office suite.
    3.3 AbiWord at http://www.abisource.com. This is a cross-platform tool that works under Unix and Windows.
    3.4 Google Drive at https://drive.google.com/ also support to load Word document files.
    Sometimes when Word fails to open your document, these tools may be able to open it successfully. If that is the case, then after the document is opened, you can just save it as a new document which will be error-free.
    4. For docx files, they are actually a group of files compressed in Zip file format. Therefore, sometimes, if the corruption is only caused by the Zip file, then you can use Zip repair tools such as WinRAR at
    http://www.rarlab.com to repair the file, as follows:
    4.1 Assuming the corrupt document is a.docx, then you need to rename it to a.zip
    4.2 Start WinRAR, go to "Tools > Repair Archive" to repair a.zip and generated a fixed file a_fixed.zip.
    4.3 Rename a_fixed.zip back to a_fixed.doc
    4.4 Using Word to open a_fixed.doc.
    There may still be some warnings when opening the fixed file in Word, just let ignore it and Word will try to open and repair the fixed file. If the file can be opened successfully, then you can just save the contents into another error-free file.
    5. If all above methods does not work, then you may try third-party tools such as DataNumen Word Repair at
    http://www.datanumen.com/word-repair/
    I have used it to repair some word documents successfully. It provides a free demo version so that you can try to see if the data you want can be recovered or not.
    Good luck!

  • I have converted my pdf files to docx files using the Adobe Export PDF but when I drag my converted files to Word there is no text, just blank pages.

    I am really new to Adobe and Creative Cloud and its logic so I hope someone can help me understand it.  My objective is to get my scanned PDF docs converted to text document files so I can open and edit in Word.
    I have scanned my documents into a pdf format. I then dropped the pdf file into my Adobe Export from PDF. It exported and converted them to docx files just fine. When I click on the created docx file I have the correct number of pages but they are completely blank. I don't have any converted text. Am I missing a step?  I have also dropped these files into my Word with the same result. 

    Are you still experiencing a problem with Adobe Send?  We inadvertently introduced a problem earlier today (now fixed), but you reported your issue was last night.
    Anyway, can you check again?

  • Doc or docx file stop upload at 100% but never complete

    My PC is Windows XP using Firefox2.0.0.7
    today I start to try adobe share
    I try to upload a png file is ok
    then i try to upload a docx file.....
    the file upload normally at start...
    however, when it reach 100% the upload will not complete even
    i wait for over 5mins
    then i try upoload a doc but it is the same
    what's the matter??
    thank you very much

    And then i try to upload with IE
    it can complete normally......
    then i try to restart the Firefox and try again
    then.... it can also complete normally.....
    may be it is my network problem??
    but i not sure@@

  • In converting a .docx file to .pdf the the Word functionality of linking screen tips to hyperlinks is lost. Why?  How can screen tips be saved in pdf if at all?

    In converting a .docx file to .pdf the the Word functionality of linking screen tips to hyperlinks is lost. Why?  How can screen tips be saved in pdf if at all?

    Thanks for replying. I am converting from MS Office Word document to Adobe Acrobat Document and opening with Reader XI - sorry my mistake.
    I now notice another problem. On trying to open a specific hyperlink in the pdf version I get the message  'Acrobat does not allow connection to: www.biblegateway.com'.  Why would there be a restriction? 

Maybe you are looking for