Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back o
Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back okay --- except I got error messages that my "registration for Photoshop (I use CS4 Extended) and Photo Mechanic are no longer working". I worked on Photoshop first, and tried (several times) to fix it with their online help suggestions. Nothing worked.
Is there a simpler way to "get my licenses/registrations back"??? I am also going to contact Camera Bits about the Photo Mechanic issues. Thanks
Same problem and for months now. I haven't been able to find a solution, but I suspect that's because I don't know exactly what's wrong.
Similar Messages
-
Why I'm losing space on my internal HD, after i started to use the Time Machine, and after deleting all my files i still dont have any space on my internal HD?
Why I'm losing space on my internal HD, after i started to use the Time Machine, and after deleting all my files i still dont have any space on my internal HD?
-
i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I have an iPhone 4 and received the 5 today. I have hundreds of pictures and apps on the 4. How do I get all the apps, photos, contacts, etc. onto my new phone?
Can't you just Sync it to the Computer you usually Sync to...?
That should reinstate your Information...
iPhone Syncing
http://www.apple.com/support/iphone/syncing/ -
I recently upgraded my macbook to mountain lion. Before doing so I used time machine to back up my entire laptop with an external hard drive.
When I got my computer back it was clean....all pics, music, documents, bookmarks etc. are gone. How do I get these files off the external hard drive and back onto my laptop with the new upgrade?I recently upgraded my macbook to mountain lion. Before doing so I used time machine to back up my entire laptop with an external hard drive.
When I got my computer back it was clean....all pics, music, documents, bookmarks etc. are gone. How do I get these files off the external hard drive and back onto my laptop with the new upgrade? -
Can someone help me see my pictures again in iphoto? 3 weeks ago while uploading a video from iphoto to Facebook, my events thumbnails all disappeared and were replaced by black squares - the event names and number of pics in each remain but when I click on the event, I only get squares where the pics should be - when I click those squares, I get a square with a triangle and an exclamation mark in middle.
Apple had emailed me about defective disks in iMacs so I took mine to the Apple Store and they replaced my HD then reinstalled from my backup via Time Machine - I still cannot see my pics! I tried to reinstall from an earlier Time Machine date - that copied everything and now my HD has double the amount of data but I still cannot see my pictures!
I would be thankful for any guidance on how to retrieve my pictures...
Thank you.iPhoto 6 and later: Rebuilding the iPhoto library
-
Hi
I have had my mac book pro for almost 6 months. Whilst using a 500 gb portable hard drive with time machine, I was surprised to get a message saying there wasn't enough disk space to complete a back up.
I brought another but started to look into why I had used so much space. In system information I had this view. Can anyone help me find where to clear this back up which is taking up so much of my hard drive.
Thank you
DanLocal Snapshots - About
Local Snapshots on Portable Macs -
Help!! What's going wrong here. I used to have iTunes installed on this computer but lost it when it crashed. I've tried re-installing it numerous times but I keep getting the same error message. "Error writing to file: C:\ProgramFiles\iTunes.Resources\es.lproj\iPadLicense.rtf. Verify that you have access to that directory." I know I have access to that directory because on a different computer I can sync my iPad and iPhone. What am I doing wrong? What do I need to go in and authorize or turn on? Any help greatly appreciated. Thank you.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
AVCHD footage, Timeline is yellow and will not render past a certain point ??
Hello,
I am using Cs5, and footage is from a Sony NXCAM, AVCHD, 1920x1080i. Anyway, all the footage is the same, about 60 minutes worth.
I have an good video card, the 3800 so I am able tyo use the Mercury engine. And I have started this project twice now from scratch, with the same results each time.
From the onset, the clips I put on the timeline create the 'yellow' bar, even though the settings I use match my footage exactly. (Strange)
Some of the transitions I use turn the yellow area to red, and it doesn't play back well unless I render the entire work area. All is well until about 12-15 minutes in, then when I ask the software to render the entire work area it no longer does. It just starts playiong the timeline like it already did it. But the small red and yellow portions are still there.
So why it won't render betond a certain point is very puzzing!
I took about 40 minutes of footage directly to Encore and was able to put the whole timeline, red parts and all on to a Blue Ray disc.
I then exported the mixed colored timeline to media encoder, I wanted to create a smaller SD file for DVD and 'encoder' only encoded the green area of the timeline, about 12 minutes.
Anyway, I cannot get the timeline to render after about 12-15 minutes of footage. The time was slightly different on both projects.
Any help would be appreciated!When Timeline will only Render a certain section, it is often that the WAB (Work Area Bar) has become set to less than the full Timeline. If that is the case, click the \ (Backslash key), and then Dbl-click the little block in the middle of the WAB to reset to the full Timeline.
Good luck,
Hunt -
My iphone 4 says disabled and "connect to iTunes", i dont know if i want to reset it. If i take it in to the Apple store, will they have to reset my iphone indefinetley??
Please turn off your caps lock.
All caps indicates shouting, is considered rude and is difficult to read. Many will not read such posts.
If you are unable to restore your iphone then try this:
iOS: Unable to update or restore -
It seems mandatory to answer some questions about using mozilla firefox to start usin gfirefox and to chose a "gift" i.e.. an ipad to go to mesterquiz and subscribe to a service of 150kr/week
How do I get around this?Firefox costs nothing to use, and there are no "gifts" involved. Sounds like you may have signed up for something not related to Mozilla.
-
how do I view the photos ? I backed up with iPhoto closed as recommended but when I enter the Time Machine and click on iPhoto library it calculates there is 11gb in there so files must be present but when i click on open with iPhoto nothing happens ? any help welcome please !!??
The external hard drive must connect to your Mac using a USB or FireWire connection.
Note that the hard drive must be formatted in Mac OS Extended (Journaled) to work correctly with the iPhoto Library and be backed up to the Time Capsule and with the backups of your Mac.
We are really talking about iPhoto uses here, so you should post in the iPhoto Support area for more details about this. The link is just below.
iPhoto for Mac -
All itunes data gone...can I reload from Time Machine and external HD
Okay, so maybe I was the stupid one and deleted all of my ITunes library....don't yell, I just wanted to free up some HD space...
Fortunately I use Time Machine and an external HD to back everything up..can I reload my Itunes library from Time Machine and the external HD..can anyone walk me through the process?docutale1 wrote:
Hi there,
I've done some searching and i haven't been able to find the answer to this problem. I am wondering if someone can help me with this.
My HD was faulty so i had it replaced. my complete 300gb music library was backed up on an external HD. The iTunes program was running on my local HD. So i ran the local iTunes off of my ext. HD.
Now that i have a new HD and i restored everything from Time Machine,
Did you restore the entire disk from Time Machine?
Boot from your System install DVD then Restore from backup and select the Time Machine drive?
See this -> http://web.me.com/pondini/Time_Machine/14.html -
Dispatcher yellow,J2EE status info unavailable,Could not get file from DB
Hello Experts,
I have successfully installed a ECC 6.0 server-ABAP +JAVA system (DB2 v9.5 FP4 windows server 2008-x64 bit).
Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
I already tried Notes 784568 and 997510
Relevant logs:-
jvm_bootstrap.out
=================================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
Attempt to fully materialize lob data that is too large for the JVM.
Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
==============================================================================================
dev_jcontrol
=============================================================================================
Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c 913]
[Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c 1749]
[Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 273]
[Thr 4360] JControlCloseProgram: started (exitcode = -1)
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
=================================================================================================
log_bootstrap_ID0140026.0
==========================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
============================================================================================
Eagerly looking forward to a solution from you experts..
Thanks,
RakeshHi,
I am facing the same related problem with ECC 6.0.
My dispatcher started it is showing yellow- dialog queue standstill, J2EE status info unavailable
after some time dispatcher has stopped.
Please check my below trace file for dispatcher:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 03
sid DEV
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 114
intno 20050900
make: multithreaded, Unicode, optimized
pid 13108
Fri Nov 27 02:31:55 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 114 successfully loaded
shared lib "dw_xtc.dll" version 114 successfully loaded
shared lib "dw_stl.dll" version 114 successfully loaded
shared lib "dw_gui.dll" version 114 successfully loaded
shared lib "dw_mdm.dll" version 114 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
Fri Nov 27 02:31:59 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapdev_DEV_03 <
DpShMCreate: sizeof(wp_adm) 15800 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 08290040, size: 4889440)
DpShMCreate: allocated sys_adm at 08290040
DpShMCreate: allocated wp_adm at 08292090
DpShMCreate: allocated tm_adm_list at 08295E48
DpShMCreate: allocated tm_adm at 08295E78
DpShMCreate: allocated wp_ca_adm at 0869F2B8
DpShMCreate: allocated appc_ca_adm at 086A5078
DpShMCreate: allocated comm_adm at 086A6FB8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 08727E78
DpShMCreate: allocated gw_adm at 08727EB8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 08727EE8
DpShMCreate: allocated wall_adm at 08727EF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Nov 27 02:32:00 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 13356
argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2919
argv[5] = -DSAPSYSTEM=03
argv[6] = -DSAPSYSTEMNAME=DEV
argv[7] = -DSAPMYNAME=sapdev_DEV_03
argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >sapdev_DEV_03 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Nov 27 02:32:01 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 114
Release check o.K.
Fri Nov 27 02:32:05 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Nov 27 02:32:40 2009
ERROR => W0 (pid 13364) died [dpxxdisp.c 14441]
ERROR => W1 (pid 13372) died [dpxxdisp.c 14441]
ERROR => W2 (pid 13380) died [dpxxdisp.c 14441]
ERROR => W3 (pid 13388) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 13396) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 13404) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 13412) died [dpxxdisp.c 14441]
ERROR => W7 (pid 13420) died [dpxxdisp.c 14441]
ERROR => W8 (pid 13428) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W9 (pid 13436) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W10 (pid 13444) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:50 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Nov 26 21:02:50 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 13364 Ended no 1 0 0
1 DIA 13372 Ended no 1 0 0
2 DIA 13380 Ended no 1 0 0
3 DIA 13388 Ended no 1 0 0
4 UPD 13396 Ended no 1 0 0
5 ENQ 13404 Ended no 1 0 0
6 BTC 13412 Ended no 1 0 0
7 BTC 13420 Ended no 1 0 0
8 BTC 13428 Ended no 1 0 0
9 SPO 13436 Ended no 1 0 0
10 UP2 13444 Ended no 1 0 0
Dispatcher Queue Statistics Thu Nov 26 21:02:50 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu Nov 26 21:02:50 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Nov 26 21:02:50 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:55 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapdev_DEV_03 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (13340) (SOFT_KILL)
Stop icman
killing process (13348) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:13340 HANDLE:1564)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:56 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:13340 HANDLE:1564)
wait for end of icman
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:57 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:58 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:59 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Please help me to start my SAP MMC.
Thanks -
How can I do the recovery of my mac mini with my western digital password protected hard disk (it's my timemachine) when I do the process of recovery everything goes well until I have to choose the date of a previous saving from which I can do the recovery nothing appears.
In the sidebar of a Finder window, select the icon representing your startup volume ("Macintosh HD," unless you gave it a different name.) At the top level of the volume are folders with these names, among others:
Applications
Library
System
Enter Time Machine and select the most recent snapshot, which is behind the frontmost window. Are those folders present in the snapshot?
Maybe you are looking for
-
Problem while configuring webutil on oracle application server 10g(9.0.4)
hi, I have configured webutil with oracle application server 10g(9.0.4).JInitiator 1.3.1.17 is installed. I did everything according to webutil manual.Then i developed a form using developer suit 10g (9.0.4). and successfully compiled and attached we
-
Dump on execution of RFC HRXSS_PER_READ_P0006_US in ECC
Hi I am just trying to execute one of FM that is used in case of country specific self service application. But I get following dump in the backend. Strangely standard wd java also calls this FM without any dump. I also did check though extenal debu
-
Reader XI has the print button off the screen when on 800x600 resolution
Reader XI has the print button off the screen when on 800x600 resolution as well, how to fix without changing resolution? A user needs the resolution set to that for her eyes. I see that this was an issue in Reader X and update 10.1.3 resolved it.
-
Unable to view planned order from exceptional summary window
Hello All, I have ran ASCP plan and it details out the exceptions and recommendations, but I am unable to view planned order from exceptional summary window>recommendations>cilck discrete jobs, no planned orders visible. This issue also shows up for
-
I have an iMac 2.1 GHz powerpc G5, 1 GB DDR2 SDRAM, Mac OS X v 10.4.11. I cannot add a printer. When I press the + button it does absolutely nothing. I've read support options to RESET the printer, but that did nothing, too. Please help me be able