Recognising Airport but no internet connection

Hi - I have just got one of the older Airport Extreme units. I am getting connection between the airport and my computers but I cannot get on the internet. I just get an alert box saying there is no connection. Any ideas? I am using a Virgin modem. Is it something to do with the IP address?
thanks

I have the old airport admin utility, is it best to upgrade to the new airport utility?
Yes. The newer utility does support the earlier 802.11b/g AirPorts. You can download a copy for Tiger from here: AirPort Utility 5.4.1
Should I upgrade the firmware on the extreme too?
Yes.
Also this Extreme is the modem model - could that be causing a conflict? - as my connection is fibre optic I need to use the virgin modem and have the airport as just a router.
No. Just because your AirPort Extreme has the built-in modem shouldn't make any difference.

Similar Messages

  • MacBook Pro says connected via Airport but no internet connection at all.

    I have a strange problem. My MacBook pro 13" 2009 is no longer connecting to a wireless network it was previously able to get Internet through over wifi. I have not used the wifi here for quite a while 3-4 weeks so the recent update may have something to do with it, but this laptop has the most picky network cards out of all macs I have owned, refusing to connect to many routers. The strange thing was, it used to work on this one, and it's doesn't anymore while no settings have been changed. It works over Ethernet fine. My iPad and iPhone work perfectly on the same wireless. Even the windows laptop works on the network without a hitch.
    Looking in the settings, it does not even obtain an address for the router, so how could it possibly be connected to it? And it gives itself the weird ip address of 192.168.1.77? Also, I am using a WEP key, but as I said no settings have changed since I last successfully used it.

    The router is a Thomson TG585 a few months old not sure on firmware.

  • Airport network connected on full bars but "no internet connection" and missing lock icon!

    this is really frustrating!
    I'm using wireless in my house. when i click on my network it connects and it shows perfect connection which is full bars.
    on Network Preferences it says that i'm connected to the Airport but when i go to Safari it shows "You are not connected to the Internet" so i click on Network Diagnostic where the 3 network status on top has the green indicator but the ISP, Internet and Server show red and failed.
    I don't think there's anything wrong with my internet connection since I'm able to go online using my sister's computer and also on my iPhone.
    There's also usually a Lock icon/symbol next to my network's name but when i'm connected to my network the Lock icon seems to be missing but it still shows full bars connection. I really don't get how it's possible to be connected to a network, but no internet connection, while i can access the internet on other devices.
    Please help me out here. I've tried ways like going to library>preferences then put the system configuration into Trash, and going to Network Preferences and removing the Airport service and creating a new one.
    and one more thing. all mentioned above are when i clicked on Advanced on network preferences then i clicked on TCP/IP and changed the Configure IPv4 from Using DHCP to Manually. When i'm back to using DHCP there's an exclamation point over the airport icon on the top bar and it says no internet connection.

    Got my own question answered by a colleague.
    He had me create another "Location" in the network pane of System Preferences, then choose it and click Apply. I created a new location which I called 'Airport', chose it and clicked Apply and sure enough, an IP address showed up and all is well.
    Justin said it's a network bug in Leopard.

  • Airport Says It's Connected -- But No Internet Connection...

    This is driving me mad...
    We're using Airport to connect a 12" PowerBook G4 (10.4.11) to a WirelessLAN (the modem is an Arcor A300 WLAN -- a German make)
    We had been having no problems until it one day said "you are not connected to the internet".
    I've tried all the restarting the modem rigamarole, and the PB can connect via Ethernet. Opening Internet connect, Airport signal strength is 100%, it states that it's connected to the Arcor modem.
    Under System Preferences / Network it states "You are connected to the internet via Airport"
    Also, I can see the PowerBook mounted in My Mac Pro's Finder...so it must be connecting wirelessly to the Arcor box --- My Mac Pro is connected to the Arcor Box via Ethernet cable.
    Anyone got any ideas, suggestions as to what's going on?
    TIA,

    I am having a very similar problem with one of the iMacs here at our office on AirPort. We have four machines using an Airport Extreme, but only one has this issue--a full set of connection bars and access to everything else that is shared, but the internet connection keeps dropping every 15-20 minutes and won't reconnect. From the Airport icon we turn off the Airport, then connect again and it works fine for another 15 minutes until it quits again. I finally had to use a cable to hard-connect that computer to our network and now it works fine, so it can't be the computer itself.
    What to do? I'm afraid this problem will start with the other machines, as well. Can anyone assist?

  • Airport Express signal fine but no internet connection

    We have been using an Airport Express for wireless Internet access and recently are unable to connect to the Internet. We use a Comcast cable modem, through a Linksys router, to the Airport Express. We can connect by network cable to the router and access the Internet, but are unable to connect wirelessly. We are getting a signal from the Airport Express (the light is green), but no Internet connectivity. We have restarted and done a hard reset (holding the reset button while plugging the Airport Express in) of the Airport Express, but it did not seem to help. The hard reset did not result in resetting the settings, so perhaps there is another way to reset it or perhaps there is another problem.
    Has anyone had similar problems? 

    I tried power cycling the cable modem, downloading new firmware (why didn't Software Update tell me about this?), deleting the DNS servers, hard reset of AirPort Express, factory reset of AirPort Express, fiddling with AirPort Admin Utility, fiddling with AirPort Setup, all of the above in different order and different combinations, and it still would not work.
    Power cycling the cable modem was one of the first things I did, and that resulted in getting Internet connection through the cable modem onto the ethernet cable; just no Internet through AirPort. Finally, after a factory reset of the AirPort Express did not help, I decided to power cycle the cable modem again, even though I had already just confirmed again that I was getting the Internet through the ethernet cable. Once the cable modem finished the power cycle, it finally worked! I was back on the Internet via AirPort!
    I'm not exactly sure which solution fixed it for me, but I suspect that it didn't work at first because I did not power cycle the cable modem afterwards. In other words, if after changing AirPort settings you still are not connected to the Internet, try power cycling the cable modem. Do this every time for each change you make to the AirPort settings.
    The other thing I learned is that unplugging the cable modem from the wall power outlet or turning off the power strip will NOT power cycle the cable modem properly. Instead, you must remove the power cord from the cable modem. I tried all three of these methods and for whatever reason, the only time it worked was by removing the power cord.

  • Connected to network, but no internet connection

    Just returned from a one week trip to CA with my macBook. Prior to the trip everything regarding a connection to the internet worked fine... I have an Airport Extreme network set up at home. For the first five days of my trip, everything worked fine as well. Connected to several different open networks (offered by hotels and Bed & Breakfasts (B&Bs). Then suddenly I could not get an internet connection with any browser (Safari, Firefox, Flock). At one particular B&B it worked flawlessly one evening, then the next morning at the same B&B, no internet. Yet I was connected OK to the open network. Moved on to another city, a different hotel and network, same problem. I was connected to the network, but no internet connection. In Safari, the blue bar would get as far as the http:, then it would hang there. Now having returned home to my Airport Extreme network, everything seems to be working fine again in all browsers. Any idea what I may have encountered for those two days? I have another trip planned in the near future, and would hate to have this happen again.

    I'm sorry but I'm not posting to answer your problem but just to say that I have a very similar issue when connected to my home network through either wireless or ethernet- connection is erratic and pages hang despite showing an excellent signal strength. I have a divided drive and have windows installed on my Macbook. I have no problems on the windows side. My friends who have ipods and iphones have similar problems connecting to my home network. I have no problems connecting wirelessly to any other network that I've tried. This is a real shame as I want to use Mac software but end up in Windows all the time. Any light anyone can shed on this would be very welcome.

  • Airport Express lost internet connection

    Wireless modem reset by internet provider.
    Can connect to internet via ethernet connection between computer and modem.
    Can set up airport express, all computers see & connect to wireless network and green light on a/e.
    Connect airport express directly to moden, green light but no internet connection.
    rebooted modem, a/e, computer, reconfigured wireless network, still no internet.
    Week ago everything was fine, then amber blinking light on a/e for couple days and then lost connectivity.

    Suggest that you temporarily turn off wireless on your laptop and connect it to one of the ethernet ports on the Netgear router to see if you can get an internet connection that way. If you can, check the other ethernet ports on the Netgear to makes sure they are all operating.
    However, if you can't get an internet connection with the laptop connected directly to the Netgear, then the probable trouble spot points to the ethernet ports/switch on the Netgear.
    If everything checks OK in the first paragraph, then you know that the Netgear is functioning correctly and you can look elsewhere for the issue.
    Try a factory default reset on the AirPort Express again as follows:
    Power it down for a few minutes
    Hold in the reset button and keep holding the button in as you plug the AirPort Express back in to power
    Release the reset button after 10 seconds
    After reconfiguration of the AirPort Express, if you continue to receive the "no ethernet" message after a few tries, then it's likely that there has been an internal failure within the AirPort Express. This can sometimes occur on AirPort Express devices that are a couple of years old or older.
    If that's the case, I'm afraid the AirPort Express will need to be replaced.

  • AirPort Express (2nd) Internet Connection Speed

    Dear All
    First of all, I looked everywhere on the internet about this issue I’m having and couldn’t find any solution. To explain my issue let me tell you how and why I use AirPort Express shortly;
    My Purpose
    I have a wireless network and all my PCs are connected in one network. I have a Windows server and using it for general purposes and also as a file server. But if someone joins my network, they all are able to see my shared folders. They are able to read/write files (even delete them).
    So I decided to create 2 networks with AirPort Express (2nd Generation). I have a wireless network for internal use only (for me and my PCs) and one Guest network.
    Everything seems okay and there is nothing wrong.
    How I Installed AirPort Express (APE)
    I connected APE to my router (standard US Robotics DSL router) and my switch to APE. I used AirPort Utility on a Windows 8 PC and configured APE settings.
    Base Station status seems normal (have a green light as well) and works okay. I can use my internal network, my PCs are communication with each other (they are all on the same switch). Guest network also works okay and seems like there is nothing wrong.
    My router uses 192.168.2.xx IP range and APE is using its own 10.0.1.xx IP range. This makes APE to add an issue to Issues list as Double NAT.
    What is Wrong?
    I have internet connection and I can browse web pages and do that kind of things. But my internet connection is really slow and some times cannot display web pages. I have to refresh some pages a few times to display it. My ping increased 5-6 times over than normal.
    I thought the problem is the PC that I’m using but then realized that every PC has the same issue. I made a speed test and it showed 352ms ping to the nearest server to me which is really a high value.
    My connection is unstable. It’s not dropping but speed suffers. Here is a test result. In this test my ping was 31 ms but as you see speeds are suffering. My connection is supposed to be 8mbps (Down) and 1mbps (Up).
    What should I do to fix it? What is the point I’m missing? Could you please help me? Please let me know if you require further information.
    Thank you very much.
    Best Regards

    Dear All;
    I just disabled DHCP Server from my router and now it seems to be better. But I don't know if it's something that I shouldn't do or not. Have any ideas?
    This is the new result after disabling DHCP from my US Robotics router. There are still some minor issues (latency, slow downs etc.) but now seems to be better than before.
    PS: I still have that "Double NAT" notification under Issues section.
    Message was edited by: SakirSaka

  • New iMac running lion 10.7.2...partitioned drive for  windows xp pro ...successfully installed...up and running(duel boot) but no internet connection on windows side...need drivers?.....please help

    new imac running lion 10.7.2     partitioned HD for duel boot and successfully installed windows xp pro (sp2)....have internet through eithernet cable on the mac side but no internet connection on the windows side....need drivers????   please help

    I too am running xp spiii on my mac with lion. However I installed xp while running snow leopard then upgraded to lion and both are running fine. If you have the support disc that came with the imac all the relevant drivers are on there. The only other thing i would suggest is that you get spiii and upgrade to that.
    Hope that helps

  • Hi there can anyone help me out.  I have Apple TV and I am trying to connect wirelessly through a zyxel wireless hotspot gateway, I know a tad extreme but a friend had one free,  anyway I can find the router but no Internet connection?

    Hi there can anyone help me out.  I have Apple TV and I am trying to connect wirelessly through a zyxel wireless hotspot gateway, I know a tad extreme but a friend had one free,  anyway I can find the router but no Internet connection?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • Safari doesn't work ! Version 6.0.2 - but the internet connection is operational using Skype - what to do?

    Safari doesn't work ! Version 6.0.2 - but the internet connection is operational using Skype - what to do? runing 10.8.2
    Thanks for your support in advance.

    I don't know about Growl as I've never used it. But I'd remove anything that might involve your internet connection. To remove Growl: http://growl.info/documentation/growl-package-removal.php
    In my earlier post I asked do you have any Anti Virus software installed?
    Do you have access to another computer so you could download another browser, perhaps onto a USB stick and then install it on your Mac just to see if the problem is Safari specific:
    Google Chrome: https://www.google.com/intl/en_uk/chrome/browser/
    Firefox: http://www.mozilla.org/en-US/firefox/new/

  • I can not connect to iswifter, some times it is connected and some time it shows " UNABLE TO CONNECT TO SERVER PLEASE CHECK THE INTERNET" but my internet connection is good and other wbe site i can open without any problem. Please guide  me..

    I can not connect to iswifter, some times it is connected and some time it is not connected and getting message " UNABLE TO CONNECT TO SERVER , CHECK YOUR INTERNET" but my internet connection is ok and I can open other web site with out any problem.  Please guide me how to solve this issue.

    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
     Cheers, Tom

  • Why won't my airport express allow internet connection on TV blu ray? I have internet connection on iMac

    Why won't my Airport Express allow internet connection on my Blu Ray when there is internet connection on my IMac?

    I'm guessing you only have the modem/router supplied by your isp and the Airport Express.  Is the Airport Express connected to the modem/router with an ethernet cable?  If not, plug one end of the cable into an available port on the modem/router and the other end in to the WAN port, indicated with a dashed circle, on the Airport Express.
    Have a nice day.

  • Installed Snow Leopard OK, but when uploading the Mac os x Update Combined, it would not save. It said it could not connect to update server, but my internet connection is working?

    Installed Snow Leopard OK, but when uploading the Mac OS X Update Combined, it would not save. It said it could not connect to update server, but my internet connection is working. Any suggestions on fixing?

    Run software up date, write down the update name and version. Go to the Apple site and do a search for the updates one at a time and download them one at a time. Use an ethernet connection, sometimes software update "crushes large updates. I have experienced this before.  Hope it helps.  ATB

  • New iMac will connect to Airport but not Internet

    I've just bought an Intel iMac 2.94ghz, brought it home and tried to get it onto the internet.
    It sees my wireless network and connects just fine, with all bars full. But if I try to view a page in Safari, I get the 'You are not connect to the Inernet' page. I've tried restarting, turning wireless on and off, restarting my router, restarting, reseting and updating the firmware on my Airport Extreme, dumping AppleAirport kexts, disabling IPv6, renewing the DHCP lease (always comes back self-assigned) etc etc but nothing helps.
    Additional info:
    * my iPhone, MacBookPro and girlfriend's Windows laptop all still connect to the internet fine
    * my iMac can see and connect to the other computers on the network, and vice versa
    * my iMac cannot connect to my router, unless I manually assign my iMac an IP address
    * if I manually assign my iMac an IP address, I can see my router, but am still 'not connected to the internet'
    Has anyone got any ideas what could be wrong here, or should I be taking my iMac back to the Apple store?

    Bought my iMac in February and worked fine up until about a month ago. I have assigned a manual IP address outside the range of other devices in my network (e.g. 192.168.0.10) and this seems to do the trick (most of the time). The problem I had was the self assigned IP address wasn't in the usual range for my router so while I was connected to Airport and the internet I couldn't view any webpages. Had to do the same thing to my Macbook which I purchased about a month ago.
    The strange and very frustrating thing is sometimes it doesn't recognise my preferred network but then when it asks me to join a network, my network appears! When I try to connect and confirm password, connection times out. Whats that all about?
    The bottom line is the assigned IP solution doesn't always work but it seems a combination of issues rather than one. None of the other devices on my network (ReadyNas Duo, Xbox 360, PS3, Wii etc) have issue connecting to the router using DHCP but for some reason Airport has trouble dealing with this and assigning a correct IP or can't find the network all together.
    Only thing I can think is its some Airport update that has caused these intermittent issues and realy hope they fix it soon.
    So no update but just wanted to share my experiences in what seems a very wide scale issue...

Maybe you are looking for

  • Dreamweaver CS3 instead CS4 for optimization on older hardware . . .

    Dreamweaver CS3 instead CS4 for optimization on older hardware . . . I do design for print and every year more and more customers have asked me if I would design their web site after I have designed their brochures and other collateral. For the last

  • Remove Personal Domain Problem

    Hi. I had a personal domain setup and it was working fine. I recently removed the domain from my .Mac account. iWeb still thinks it is publishing to the domain, and shows the little green indicator light at the bottom with my domain. After it publish

  • Wireless sounblaster- wireless mu

    do i need a router or an access point. i currently have a wireless USB adapter but it cannot connect to the receiver. do i need a wireless router or access point and can i use these with an existing wired network.

  • OBIEE Cluster

    Hi Obiee Experts, Kindly help me plz....... I am going to implement OBIEE (10.1.3.4.1 version) Clustering (Active-Active) mode. I had refered oracle document but no luck, I have few query's can you please share me for inputs... · We need to install c

  • Asset Under Construction data upload

    Hi! I am doing Asset Data Transfer through AS91, how to upload Asset under construction data from legacy to SAP. can any one explain process along with accounting entries to be passed in FI? regs, ramesh