Recommendations Requested For A L675D Laptop Repair Company

I was windering if any of you folks had ever sent your laptop in to a repair company and did you have a good experience?
I'm going to roll the dice and send mine somewhere but, I thought I'd ask for recommendations here first.
Thanks!
John

I don't have specific recommendations, but you can look for one here:
Locate a service provider
- Peter

Similar Messages

LENOVO S300 LAPTOP LCD PANEL MANUFACTURING DEFECT ISSUE-REQUEST FOR DOA AS LAPTOP IS JUST 6 DAYS OLD

Dear Lenovo service team,
This is to inform you that I have purchased a Lenovo laptop from Kolkata dealer called Balaji solutions ltd.Bill no E02PSI120xxxxx Date of purchase is 27/02/2013 @ 7.30 pm Model no Lenovo s300,Sr no: xxxxxxxx.
As it is a dos machine windows was not installed there after purchasing the laptop i have installed the software on 2.03.2013and i saw that a line wave is coming on my LCD screen.and i have called to customercare @ 180030029929 and one of your executive has told me that it is a issue of software not of the laptop,he suggest me to install the software once again .then i have installed the software once again but the same problem was there after that on 5/03/2012 i go to the dealer and told my problem and they said they cant change the laptop and suggested me to go to service centre today i go to service centre at DIGITAL CARE PVT LTD. and one of the engineer named Mr t has checked the laptop and told me" it is a problem of LCD panel and it is a manufacturing defect".The LCD have to change . The problem is a manufacturing defect then why should i repair it????.The laptop is just 6 days old and why i would take a repaired one?? Either you people replace the laptop from your end or make it a DOA that i can change it from dealer end or suggest the dealer to replace it. i have spend 30,700 rs for a new one and if it comes a manufacturing defect then you people are liable to replace it out.
Request you please solve this issue as soon as possible. I will not repair it as it has a manufacturing defect it if will use it for 6-7 month i will think to repair but i will not take a repair one as it is just 6 days old and it is a manufacturing fault.
Please reply soon for this issue or suggest the dealer to replace or make it a DOA from your end.
CASE ID: 42706xxxxx
SR.NO OF LENOVO S300: xxxxxxxx
DATE OF PURCHASE: 27/2/2013
BILL NO: E02PSI120xxxxx
DEALERS NAME: BALAJI SOLUTIONS LTD
Regards,
Sudipta kar
Moderator Note; s/n and information which should not be posted openly edited for member's own protection

Can you take a photo of the damage? Once before I saw an LCD that arrived truly internally cracked. The ink was in a perfect circle, writing off any user fault.
In the worst case situation, it might be worthwhile to call Lenovo and purchase a new screen. If you purchase one through them, you can get warranty support for the new screen. I realize that is a terrible alternative, as you should not have to invest more money, but it is the cheapest route to get a functioning LCD.
←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗
Tap that kudos button if I helped ^^
←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗

Better Certification Board recommendations (Request for comments)

Now for something completely differerent:
Jordan, I appreciate what you tried to do with the Solutions for Review thread but... The latest exchanges (and a few others) on this thread I feel demonstrate why the "Mega-Thread" has already outlived its usefulness. There a a lot of good tidbits and side discussions buried in this thread that would be much more searchable and cohesive if the posters started their own threads.
Perhaps some new board suggestions for effectivness could be floated in place of the "Sample Exam Solutions for Review"?
Tips on CLD Solutions for review:
Start a new thread - indicate there will be a CLD example for review in the subject line.
For follow-up discussions on critique points start a new thread with a link to the example and a subject about the point under discussion.
This should allow the frequent fliers on this board the chance to develop a useful body of theads where specific points related to Cert specific preparation and concepts can be gathered and easily cross linked by the heavy hitters (And who knows, easilly searched by the certification candidates)
As the board grows I would hate to lose some "gems" in the noise. If we get together now, to think about what this boards goals are we can maximize our return on investment in supporting certification.
All comments welcome. Jordan, please consider floating this discussion for maximum visibility.
Jeff

I think that's a great idea - centralise the submissions and decentralise the critiques.
Another idea to improve the Certification Board might be to introduce subforums for each of the various types of certification (CLAD, CLD, CLA, etc.).
Certified LabVIEW Developer

Repair request for Delta load? Orders missing in Billing line Items

Hi
I am using BW 3.5; Some Orders are missing in BW for Billing line item reports (2LIS_13_VDITM) according to the users.
The report is based on Cube directly, ODS is not used. I planned to do a repair full request for this month's data so as to get the missing orders.
Could you please advice me on correct procedure to do that? Delta loads runs every day and todays delta is completed.
Thanks and BR
P.B

While it's usually recommended to execute setups during "quiet time", it's not required. Especially in this case. Since you're going to be restricting the setup to only extract a range of Billing Documents that are representative of the dates of data missing (or purely the identified missing documents), there is no need to wait for "quiet time" because you'll pick up the data either in your Full Repair extract or in the delta extract. Depending on how the target InfoProvider for this data is setup (cumulative v. non-cumulative), you may have to look out for duplicate data.
My recommendation would be to run your setup for only those documents that have been identified as missing. That way, you're limiting the amount of data that's required to be extracted to the setup table and then into BW, but also will remove any risk of duplicate data in your target InfoProviders.

What is the recommended virus software for my apple laptop?

What is the recomended virus protection software for my apple laptop?

OS X already includes everything it needs to protect itself from viruses and malware. Keep it updated with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgement, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

How to create request for extracting company code

Hi All,
Can any body guide me how to create a request for extraction of company code 0COMP_CODE_ATTR.
Actually i have created a request using transport conneciton but while moving this request to quality system i am getting following error.
DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
Mapping between data source 0COMP_CODE_TEXT and source system QLTCLNT440 is inconsistent
DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
Field KEY1 will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
Field TXTMD will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
Start of the after-import method for object type R3TR ISTS (Activation Mode)
Reference to transfer structure 0COMP_CODE_TEXT_BB not available. No activation possible.
Start of the after-import method for object type R3TR ISTS (Delete Mode)
Start of the after-import method for object type R3TR ISMP (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
The errors affect the following components:
BW-WHM (Warehouse Management)
Actually i have checked in Quality system 0COMP_CODE_TEXT is availble active. But i think we have to use 0COMP_CODE_ATTR data source...
Pls help,,,
Regards,
viren.

Hi Viren,
Glad that your problem is resolved.
Help.Sap.com is the best reference: http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Also check the "How-To" docs in https://www.sdn.sap.com/irj/sdn/developerareas/bi
Bye
Dinesh

TS4062 I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. Any other suggestions?

I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. My iTunes is version 11.0..3.42, iPhone is 6.1.4, and iPad 6.1.3. Any suggestions?

All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.

How to setup a variant to do full repair request for 0Material?

How to setup a variant to do full repair request for 0Material?
Thanks
York

Hi,
Do you mean to set up a varinat in process chain?
Regards
Srini

Usage of Company code field in the Change Request for Company

Hi,
Would like to know the usage of - Company code field in the UI for Change request for Company.
1. If a new Company is created, can i assign the company code directly in the UI, will the assignment also replicated to backend in this case?
2. In case of new Company creation, is it possible for multiple company code assignments?
3. Is it possible to to pick the existing Company from the F4 list in the CR and assign the company code in the CR? How about the replication work in this case?
Please share your comments, Thank you.

Thanks Sanjay.
Just to summarize and a bit more specific, here is my understanding:
1. (a). You have mentioned that we can assign new company code also - does this mean i can select            a company code which is not in the F4 list? In such case, how will be the assignment                   replicated? It should ideally create a company code in the backend before the assignment is           processed.
    (b). Usually, if a new company code is created in backend, i need to load that in to MDG tables                 such that it will be active in MDG F4 list, for Company assignments in the Change request.
2.      Understood
3.      In the Change request, if i pick existing company from F4 values and edit company related data,          it will be replicated accordingly.
         In the same CR, if i give some value in the company code data, the replication will result in one          more assignment added to the company, so as on date, SAP has given the option of only                    additional assignments to the existing assignments.

HT203164 playlist to cd burn failure. message stating unable to find cd burn program appears!? recently had HP pavilion laptop repaired for fan overheating prob & wonder if repair job erased cd program? HELP please!? am techno-challenged, old & not afflu

tried to burn playlist to CD but saw message stating unable to find CD burn program!? recently had repair company do replacement of cooling fan & need to know if this is the cause?? am OLD techo-challenged lover of music & am desperate for good free advice! PLEASE HELP! i only know enough about computer systems to be dangerous to myself and them!

i went to the HP site, read thru & viewed video instructions, went to device manager as well as HP assistant & followed all the instructions (hopefully?) but all i accomplished was killing some time as i waited for the next winter storm! am afraid to do their HP recovery disk that i made on my first HP day because i had to have geek squad make changes last year due to other connectivity issues & am hesitant to undo all their work i had paid for! hoped that HP assistant program would just discover prob on its' own! device manager took me to view of all components but nothing just simply says "this is your optical/cd drive program". am greatful for fact you tried to help, my friend, shows you have admirable and altruistic qualities!.computers have always been too unforgiving when it comes to my trying to enjoy them! too bad i don't know name of device that governs cd-drive. thank you for wanting to help me out.

HT1386 we are using same laptop with my wife for our 2 iphones and when sincronizing, she's getting my apps and is requested for my apple id and password when getting a new app on her device. How can i fix that issue?

we are using same laptop with my wife for our 2 iphones and when sincronizing, she's getting my apps and is requested for my apple id and password when getting a new app on her device. How can i fix that issue?

Each phone needs to set its own sync settings on the various tabs in iTunes. On the Apps tab, for example, uncheck the apps that you don't want on the phone being synced. This article may also be of interest: http://gigaom.com/apple/itunes-101-multiple-devices-one-itunes-account/.
You can change the Apple ID used for purchasing on her phone by going to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using her Apple ID. However, be aware that if she has any apps on her phone purchased with your Apple ID she will still be prompted to enter the password associated with this ID for all future updates of these apps. This is because apps are permanently tied to the Apple ID used to purchase them, regardless of the ID in Settings>Store.

Need Laptop Recommendation - best for Adobe Premiere Pro editing

I am in the process of looking for a new laptop and need recommendations based on how I will use the laptop. I produce video and mainly use the following programs: Adobe Photoshop, Adobe Premiere Pro CS2, Adobe Encore DVD. I also use other photo editing software such as AutoFX PGE7.0.
I currently have an HP Pavilion which is about 5 years old. This desktop has the following specs:
HP Pavilion PU131AV / a1050y, Windows XP MCE, SP3 32bit, Nvidia GeForce 6600, Intel Pentium 4 CPU, 3.20 GHz, 2GB of RAM
I believe that with a new laptop, I could create my videos more efficiently. If you have any input as to what I need in a laptop for my specific purposes, please let me know.
Thanks so much,
Angela

Harm,
Thank you for your response. I have yet to buy the new computer but will be doing so in the next couple of days. I read the links you provided, and another thread which discussed the performance of a laptop vs a desktop. I have changed my mind and will be purchasing a desktop. I need advice concerning this purchase, but will start a new discussion to do so.
Thanks so much,
Angela

Anyone know how long to wait for packaging following a repair request?

I've got a repair request pending - on the 9th - but so far nothing else has happened. Am I waiting for some packaging from Apple? if so, anyonee got an idea how long i need to wait, as two business days now gone. Email from apple below....
We have received your request for a replacement IPOD TOUCH. Your Repair ID is XXXXXXXXXXXXX.
Our initial diagnosis indicates that because your product replacement will likely be covered by the warranty, an AppleCare Protection Plan, or another Apple repair program, there should be no charge to you. If we have questions or concerns regarding the repair coverage, we will notify you.
Within two business days, you should receive the return instructions for the original and shipping materials for you to use. Please don't use any other package, because if the original is damaged in shipping as a result of improper packaging, it will not be eligible for service and will be returned to you unrepaired. Do not include any other items, such as headphones, as they will not be returned to you.

sounds like you are awaiting some sort of packaging which you can put your old ipod in so you can return it to apple.
since it's been two business days, might be worth emailing them to let them know.

Cable company's request for admin password?

Comcast is now offering phone service via cable modem in our area. Since I don't currently have a land line for phone and have relied on cell phone coverage for years, it seemed like a good idea to subscribe. Cable guy comes out, big new modem gets installed, and all seems well. Since I don't currently even own a phone other than a cell, he puts a splitter in the cable so both modems have service, telling me I can activate the new modem at my leisure.
So today, internet service gets interrupted and I'm directed to a Comcast homepage. Two options exist on the page: one for customers, and one for techs. So I click on the one for customers. Immediately a .dmg file begins to download. I'm a little amused that the host instantly knew that I needed a .dmg file as opposed to an .exe, but no matter. I move on and open the file. Lots of stuff goes on, and then I get the typical OSX dropdown asking for an admin password, as you would normally see when you install software. Therein lies the problem: there's nothing normal about this dropdown window. There's a little Comcast icon infused with the window, and I immediately get the impression that this install process on my hd isn't necessarily, entirely local. It seems to me that everything I'm doing at this moment is being shared with the host. And don't let me forget to add--the install process had already admonished me to disable any firewalls, which of course I didn't do.
If anyone has any experience with this and can assure me I'm just being paranoid, that would be great. I've already changed my admin password just to be safe. I just don't ever recall seeing any software specific icon associated with the OSX admin password request for an install, and being hardwired to the internet during this exercise just doesn't seem like a good idea!
-Mark

Just a little follow up on this thing...
I continue to have problems with the original modem; for a while now I've just used an air card for an internet connection, I was so disgusted with Comcast. Ever since I had installed (or started to install) their software, my airport wouldn't work. Today I downloaded an uninstaller and ran it, and whaddya know--my airport is back. I'm running on another network as we speak. I thought I had rid my hd of everything related to this Comcast software, but apparently not so until I ran the uninstaller.
Anyway, in the process the prompt window that I referred to in my original post came back up, and I thought I'd post a pic of it so you guys see what I was talking about:
Moral of the story is take care when you are prompted to install software from an internet provider.

Infopath Time Off Request For on Sharepoint Coding in C#

So I have created a Time Off Request form to put up on our internal company intranet sharepoint site.
I am trying to get this form to do several things.
First of all, after the user fills out the form they can click the submit button and it will email it to their manager. That part is working fine.
The other button is the one that I am having trouble with.
Once the Manager receives the request I want them to be able to click a 2nd "approve" button and make the following happen:
A calendar entry is automatically created in the managers calendar for the day/days requested off. It needs to be created as an All Day Event and Marked Private.
An appointment invitation needs to be sent to the requester so they can accept and the day/days will be added to their calendar as well.
An email needs to be sent to the Requester telling them their request has been approved.
Here is the code I have so far. It is in C#
using Microsoft.Office.InfoPath;
using System;
using System.Windows.Forms;
using System.Xml;
using System.Xml.XPath;
using mshtml;
using Outlook = Microsoft.Office.Interop.Outlook;
using System.Reflection;
using System.Net;
using System.Net.Mail;
namespace ITTimeOffRequest
public partial class FormCode
public void InternalStartup()
((ButtonEvent)EventManager.ControlEvents["CTRL10_2"]).Clicked += new ClickedEventHandler(CTRL10_2_Clicked);
public void CTRL10_2_Clicked(object sender, ClickedEventArgs e)
// Get a reference to the Main datasource
XPathNavigator root = MainDataSource.CreateNavigator();
// Create an Outlook application
Outlook.Application outlookApp = new Outlook.Application();
// Get NameSpace and Logon
Outlook.NameSpace outlookNS = outlookApp.GetNamespace("mapi");
outlookNS.Logon("arochelle", Missing.Value, false, true);
// Create a new AppointmentItem
Outlook.AppointmentItem appointmentItem =
(Outlook.AppointmentItem)outlookApp.CreateItem(Microsoft.Office.Interop.Outlook.OlItemType.olAppointmentItem);
appointmentItem.Sensitivity = Microsoft.Office.Interop.Outlook.OlSensitivity.olPrivate;
appointmentItem.AllDayEvent = true;
appointmentItem.ReminderSet = true;
appointmentItem.ReminderMinutesBeforeStart = 5;
appointmentItem.BusyStatus = Outlook.OlBusyStatus.olBusy;
appointmentItem.IsOnlineMeeting = false;
appointmentItem.OptionalAttendees = root.SelectSingleNode("//my:field2", NamespaceManager).Value;
appointmentItem.Subject = ("Time Off Request");
appointmentItem.Body = ("Date of request") + root.SelectSingleNode("//my:field4", NamespaceManager).Value;
appointmentItem.Location = root.SelectSingleNode("//my:field13", NamespaceManager).Value;
//appointmentItem.Start.Day.ToString = root.SelectSingleNode("//my:field10", NamespaceManager).Value;
//appointmentItem.End.Day.ToString = root.SelectSingleNode("//my:field10", NamespaceManager).Value;
//appointmentItem.Start = DateTimePicker.("//my:field10");
//appointmentItem.End = DateTimePicker("//my:field10");
appointmentItem.Start = DateTime.Parse("//my:field10");
// Save to Calendar
appointmentItem.Save();
// Logoff
outlookNS.Logoff();
// Clean up
appointmentItem = null;
outlookNS = null;
outlookApp = null;
// Send Email Confirmation.
SmtpClient client = new SmtpClient();
client.Port = 25;
client.Host = "sw-exchange";
client.EnableSsl = false;
client.Timeout = 10000;
client.DeliveryMethod = SmtpDeliveryMethod.Network;
client.UseDefaultCredentials = false;
MailMessage mm = new MailMessage("<manager email address here", "//my:field2", "Your Time Off Has Been
Approved", "Your Time Off Has Been Approved");
mm.DeliveryNotificationOptions = DeliveryNotificationOptions.OnFailure;
client.Send(mm);
Obviously i'm trying to get the code to pull in a lot of the information from the fields people have filled on on the form. For example in the send email confirmation section Field 2 is the choose emplayee email drop down box on the form. CTRL10_2
is the approve button. Field 10 is the day requested off. The form has five lines to request days off on it and each line has a date picker to choose the day. A text field for number of hours requested off, a Time field for Start Time, a
Time field for End Time and a Drop down box to pick Sick Leave or Annual Leave.
I'm having a problem with creating the appointment on the appropriate day in the managers calendar and then sending the appointment request to the requester. That is where the code errors out. This is only the coding for the first line of time
off requests as well, i'm not sure how to change the code so that it will include all 5 request lines unless I have to use some kind of Matrix or something.
I'm trying to get the appointmentitem.start and .end to pull from the date(s) that have been requested off but what happens so far is that when the approve button is clicked it just crates a private all day calendar entry for the current day on the managers
calendar and doesn't generate the appointment request for the requester or send the confirmation email.
Any help would be greatly greatly appreciated.

for the electronic form:
since you're on Standard edition, I wouldn't recommend InfoPath... I'd start with standard SharePoint list (using attachments for scanned images)... if it needs to be customized, I'd use web dev approaches (HTML+JavaScript), since we've found this approach
to be VERY upgradable.
For the process:
Assuming the process is LINEAR, I'd use SharePoint Designer with an approval process activity and a task activity (for AP). If the process is NOT linear, I'd look into a third party component like Nintex or K2 (you may find some people who say "just build
it with Visual Studio"... don't. You'll regret it later, and the business will too).
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Recommendations Requested For A L675D Laptop Repair Company

Similar Messages

Maybe you are looking for