Recommended Modem to use with Airport Extreme

I currently have AT&T DSL. It is connected to AT&T's really crummy 2Wire 2701HG-B modem/router combo. I want to ditch the 2Wire and replace it with the Airport Extreme router, but I am told that I will also have to buy a modem to hook up to the router.
Any recommendations on a good modem that is compatable with AT&T DSL, and plays nice with the Airport extreme?

Best to check first with ATT for modems that are compatible with their service and will be supported in the event of connection difficulties.
http://www.att.com/equipment/
It looks like the Motorola 3360 might do what you need. 
I have the previous version model....a Motorola 2210.....that has worked just fine for 4+ years with my AirPort Extreme.

Similar Messages

  • What's the best ADSL modem to use with Airport Extreme?

    My current set up includes an 802.11n Airport Extreme (that I use in conjunction with my Apple TV and MacBook) connected to my Netgear DG834G wireless router (wifi is switched off). The Netgear router is connected by ethernet to 2 Macs, a Skype phone, and my laser printer.
    I want to upgrade my LAN to gigabit, and I'm not sure whether I would be better to use a Gigabit switch instead of connecting everything via the router, or whether I should buy a new router which supports gigabit?
    Also, I've just been reading about the DrayTek Vigor 100 ADSL2+ Ethernet Modem, and it suggests that it's better to have a separate modem rather than a router. All I know is that in the early days of broadband the USB modems connected to one computer were very unreliable, and that a router was far better.
    What is the best way to configure such options? When I first got my new Airport Extreme I found that both it and the router were 'competing' with each other. Is there anywhere to turn to so I can get a better understanding of how to configure these things.
    PS. I know my Airport Extreme doesn't have gigabit - but I've just ordered the newer version that does.
    Message was edited by: bilbo_baggins

    I use the Linksys ADSL2MUE - which I managed to buy for £12.
    I configured it in bridged mode - leaving the Apple Extreme do all the firewall and DHCP stuff.
    It's not pretty but does the job.

  • Modem for use with airport extreme?

    I know that the AirPort Time Capsules do not have a built in modem and I need an external one.
    I also have ADSL internet as opposed to Fibre so I need to find something suitable to sit between the Time Capsule and the interent. I realise that I could simply use the modem / router supplied by my ISP and switch off the wi-fi on that and just use the modem aspects, but this uses an additiional power source.
    My question is: Is there a suitable modem that will sit between the AirPort Time Capsule and an ADSL internet connection that does not need and additional power source?
    If not (and I suspect there isn't as I can't find one), then is there any benefit in having a independent modem only device over using the ISP supplied modem / router and switching the router aspects off?
    Thanks for any advice as I am having a real nightmare setting up my third party modem / router to work with an Apple network with some additional non-Apple devices and feel that going down the all Apple route of an AirPort would just make my life so much simple...

    PPPOA is the big issue..
    You cannot bridge to a modem running that authentication. There is no client that will work so the Apple has to be in bridge.. or some dicey double NAT setup.
    The Thomson/Technicolor offers a dhcp spoofing but it goes through the NAT and it also causes heaps of issues.. Thomson modem routers have the worst possible NAT called full cone. You must manually bind all UDP ports to the NAT to get access.. and even that is not workable for many functions.
    So you are quite right.. it is a mess.
    Hence my thought to switch to an Apple router as it automatically opens relevant ports and recognises Apple devices. I have no idea (at this stage) how to set up a router / modem or bridge or other device to sit between the Apple AirPort Time Capsule and the ADSL internet connection.
    Using the Apple router to open ports, is not going to help.. because you cannot bridge the modem.
    So where do you end up.
    The reason I am struggling with my Asus DSL-55n modem is that it is just too complex for me to get to grips with and there is little in the way of support documentation from Asus to assist me is overcoming the specific difficulties I have been having.
    What issues are they?
    I do not particularly like Asus modems.. they are generally poor firmware.. but have you loaded in the latest firmware.. check for updates because they have been improving.
    A solution might be the Draytek 120 modem.. it has a neat little trick where you do PPPoE to PPPoA on the modem.. there are a few that can do it but the only readily available now that I know of is the draytek.
    There is a mode in the Thomson called PPTP to PPPoA relay.. this also works very well but Apple do not support these more esoteric connections.. it is better used on a third party router.
    If it makes any difference at all, my ISP allocates me a static external IP address which I have paid for and is automatically pushed to whatever router I seem to use.
    It is only significant if the authentication method is IPOA .. where you use the IP as static on the router and have no authentication.. but static IP for PPPOA simply means your public IP doesn't change.. useful and helpful but not a solution to this problem.
    http://www.draytek.co.uk/products/vigor120.html
    Look at the setup for pppoa bridge.
    http://www.draytek.co.uk/support/kb_vigor100_setup.html

  • Which non apple modem/router work with airport extreme

    Hi
    My old modem needs replacing. It currently feeds into my airport extreme and an airport express extends the network to my office in the garage. Ideally I want an 'n' speed modem/router and use the airport extreme to extend the network in the garage, doing away with the airport express's slower speeds.
    Are there any non apple modem/routers that will work with the airport extreme to extend the network.
    Many thanks

    +Are there any non apple modem/routers that will work with the airport extreme to extend the network.+
    Not if you are planning to "extend" using wireless only.
    If you are planning to extend the network by connecting to your new modem/router using an ethernet connection, you have some configuration options to choose from in that case. Post back if you need more details about this.

  • ADSL2 gigabit modem to go with airport extreme?

    Just about to go back to using an Airport Extreme, but as I'm in the UK I need an ADSL modem for it. I usually just use the router that came with my O2 broadband and just switch off it's wifi. But ideally I'd like to find an ADSL2 gigabit modem. Tried googling, but all the ADSL2 modem's seem to be 10/100 ethernet, and I don't see the point in buying a gigabit ADSL2 wireless router. Any suggestions?

    chirhodesign wrote:
    Just about to go back to using an Airport Extreme, but as I'm in the UK I need an ADSL modem for it. I usually just use the router that came with my O2 broadband and just switch off it's wifi. But ideally I'd like to find an ADSL2 gigabit modem. Tried googling, but all the ADSL2 modem's seem to be 10/100 ethernet, and I don't see the point in buying a gigabit ADSL2 wireless router. Any suggestions?
    I'd think a 100 Mbps port would be faster than just about any ADSL data stream. Gigabit would be overkill. The usefulness of a gigabit router would presumably be in transferring data between devices on the LAN.

  • Recommendations for Comcast-approved modem to be used with AirPort Extreme?

    Any recommendations for modems that work well with Comcast and AirPort Extreme? If there are ones that work well or ones to avoid, I'd like to know.
    Here's Comcast's list of approved modems:
    http://mydeviceinfo.comcast.net/

    The motorola sb6120 is what I used with great success. It's a docsis 3.0 modem so it's capable of the latest high speeds that comcast can offer. Good luck!

  • Comcast Arris Modem/Router interfering with AirPort Extreme?

    Constantly getting knocked off the internet. Using an Arris Modem/Router  TG862G
    and an Apple Airport Router.
    3 feet separate each router.
    Am I getting knocked off the internet; because my AirPort Extreme  is "confusing" my Arris Modem? Could interference cause internet disconnections?
    Or is it likely something else?
    Thanks

    I had this same exact issue occur when I connected a printer to my Time Capsule, literally unplug everything from the router i.e. printer, computer, etc. etc. and wait a few minutes. Then re-plug all the peripherals (try different ports, except the LAN ) and see if that solves your wifi issue. If not, then unplug the router and just "give it a rest" then re-plug everything. If that doesn't work then defineitely try a hard reset or see if one of your connected devices is interfering with the network. In my case it was the printer that screwed up my connection and not the modem. I would also try switching LAN ports on the modem and see if that helps.
    Hope this helps!

  • Best multifunction for use with Airport extreme/express??

    Thanks to all who can help me pick a reliable multifunction printer with fax to use for my home/business. I will wire it to the Airport Express and share it with my family thru my Airport Extreme Main base station upstairs. I am will to spend extra for features and reliablity.

    No multi-function printer will work (except possibly printing only) when connected to the USB port of the Airport Express.
    If you need to share a multi-function device ensure that you get one which already has it's own networkable wireless print server and is Mac compatible.
    Relevant thread
    Kevin Mc, "Recommendations for all-in-one printer w/AEBS" #53, 02:56pm Jun 30, 2005 CDT

  • Any recommended modem to connect to airport extreme?

    I'm looking for a "simple" modem hook up to my new airport extreme. I don't want to have to try and put my excisting westell 327w dsl router/modem into bridge mode. I'm not to sure if its possible or if I'll be able to do it successfully. Is there any modems that that are a easy setup with the airport extreme. Thanks for any help.

    Welcome to the discussions, CooteyBug!
    The only real reason to configure the modem as a simple "bridge" with the AirPort Extreme is if you need to be able to activate the Guest Network feature. Otherwise, the AirPort Extreme will work just fine in bridge mode to provide a dual band wireless network. If you don't need the wireless provided by the Westell gateway, you can turn it off, or perhaps use that as a Guest Network if you need that feature.
    If you decide that you need a simple modem, It's always a good idea to start with your service provider to see if they offer a "bridge only" device. Often, they will provide a modem at no charge in return for a commitment of a year or more of continued service. This way, you can be assured that the provider will support the product in case you have internet connection difficulties.
    If your provider does not offer a simple DSL modem, the Motorola AT&T 2210 should work with virtually any DSL service line. It will take a few minutes to configure the modem properly as a "bridge", but this is not difficult with the web based setup page(s) for the device.
    In turn, the AirPort Extreme will need to be configured to "Connect Using PPPoE" with the modem in bridge mode. This is easily accomplished with AirPort Utility, the setup application for the AirPort Extreme.
    Message was edited by: Bob Timmons

  • Recommended modem to work with airport network?

    I have Time Warner internet and need to get a modem to work with an Airport Express, Extreme and Time Capsule. Can anyone please recommend one?
    Thanks.

    We recommend a modem that is compatible with your Internet service and one that your Internet Service Provider (ISP) will support.
    We could recommend the "best" modem in the world, but it would be of little value if you have connection difficulties and then find out that your ISP does not support that modem.
    It might be a better stategy to check with your ISP first, to see what they offer....or....if they do not offer a modem, to see if they have a list of compatible models that they will support.
    Often, the ISP will provide you with a modem free of charge of you commit to year or more of service.
    If you cannot decide among compatible models, then post back a list of what your ISP is offering.....to see if other users will respond with some opinions.

  • Will I be able to use my Airport Extreme model A1143 with Xfinity's ARRIS model TG862G/CT wireless modem? If so, how? I want to keep my airport network setting if possible.

    Comcast has been hounding me to upgrade to their newer modem in order to obtain maximum bandwidth with changes they've made. They sent me an ARRIS Wi-Fi modem (model TG862G/CT). I was not expecting the modem to have wireless and would prefer using my Airport Extreme (model A1143). I have not attempted to connect the new ARRIS yet. Should I send the ARRIS back or is there an easy way to make use of it while keeping my Airport Extreme fully functional?

    Thanks, I will look up "bridge mode" after I log off here. In the mean time, what if I were to simply buy the newest AE—will I still be able to use "bridge mode"? I imagine Comcast would prefer that I use their equipment and will eventually leave me no choice, but until that happens I would prefer to use Apple's AE. What is your expert take on this?
    Any AE will be able to do bridge. There is actually very little difference between your ancient AE and the latest AE in terms of functionality.. Apple is minimalist.. so change can be avoided.. no need to add functions that were always missing.
    I was thinking the printers are USB?? Is that incorrect.. are they wireless or ethernet? Any native network printer can be simply connected to any router.. it will perhaps be slightly easier in an Apple environment to use them on an apple router but the difference should not be huge..
    USB on the other hand is tricky.. you will need to use some router that allows print serving from USB.. that still works fine whether the AE is bridged or in router mode.
    Netflix is no problem either.. (assuming you are not trying to bust a geo-block).. the actual netflix login is stored in the TV.. the only security info on the AE is the wireless connection and that can be swapped to any wireless router. No biggie.. geoblocking is a biggie.. tell me if that is the case.
    It is really up to you.
    1. Do nothing.. let Comcast squark all they like.. they are still providing you a service you can use. They are not going to cut you off if you still keep paying the bills.
    2. Change the modem for the new one they sent.. this involves a lot of network modification .. but in view of the age of the current devices.. will have to happen in the near future regardless.
    3. Return the modem router and request a pure modem.. to give you as little network impact as possible. You will simply change old modem for new one. However at some point the Gen1 or 2 AE will die.. and the rest of the network will need updating.. you are putting off d-day. Modern wireless routers have come a long way since Gen1 or 2 AE.
    Take your pick.. Bob says 3. I say 2 or 3. It makes little difference as at some point the network needs a refresh.

  • Can i use my airport extreme as a modem with comcast

    can i use my airport extreme as a modem with comcast cable

    No, since there is no modem on board an AirPort Extreme, so you will need to use an outboard modem if you want the AirPort Extreme to have Internet access.

  • What is the best dsl modem to use with the Airport Extreme for AT

    I'm looking for the best dsl modem to use with AT&T service. I'm not really interested in their equipment. I have the newest model of the AE.
    Thanks

    I'm looking for the best dsl modem to use with AT&T service
    I have no idea if the Motorola 2210 is the "best" device to use, but it has been flawless in 5+ years of operation.
    I believe that there is a new version of the is product, now called the 3360. I normally switch modems after about 5 years of use and will use the 3360 in the near future.
    This support article from AT&T provides some valuable information about how to configure a router using a modem:
    http://www.att.com/esupport/article.jsp?sid=KB401764&cv=801,902&title=Connecting +a+non-AT%26T+provided+router+to+your+AT%26T+Internet+connection#fbid=psQd4wvHtu P

  • Is anyone successfully using Netgear WN3000RP with Airport Extreme?

    Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
    Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
    I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
    I'm using Airport Utility version 6.1.
    Can someone out there can let me know if they got this device working with their Airport Extreme?
    Also, what are my other options to extend my range?

    I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
    1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
    2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
    3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
    4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
    5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
    A Visual Representation would be
    ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
    In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
    An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
    Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

  • What's the best Gigabit Ethernet ADSL2  modem to use with the new Apple Extreme router?

    I Have upgraded to the new Apple Airport Extreme & need to update my old ADSL modem as it only has 10/100 ethernet. I don't want to spend a great deal as I will hopefully be upgrading to fibre later in the year. I find it strange that Apple have never sold them through the Apple Store.
    Thanks in advance.

    It would make no sense to recommend a modem that your Internet Service Provider (ISP) does not support, so your first task is to contact your ISP for a list of "approved" modems for use with their service.
    Once we have the list, it will be easy to eliminate the non-Gigabit models, since most, if not all, will be not be Gigabit rated.
    After all, the fastest speed that any ADSL provider might be able to deliver is maybe 30-40 Mbps.  Don't think that you will need 1,000 Mbps capability in a modem for that type of connection.
    Kind of like having a car that can go 1,000 miles per hour, but the streets are narrow, crooked, and won't allow much over 25 miles per hour.

Maybe you are looking for