Recommended Server Specifications for GIS system

Hi,
Is there any reason specific to GIS systems why a Dual quad-core CPU is preferable to a Single quad-core CPU?
Thanks, Ila

Hi,
If the vendor is Oracle, there is a middleware (Mapviewer) component to Spatial. I'm unable to find any documentation on OTN on whether Spatial/Mapviewer functionality specifically requires a dual cpu.
Do you know of any specific reasons?
Thanks, Ila

Similar Messages

Recommended server specifications for IOP 11.1.2.0 server?

In the iop_11120000_readme.pdf it references the following document:
"Information about system requirements for EPM System products is now available in a spreadsheet format in the Oracle Hyperion Enterprise Performance Management System Certification Matrix. System requirements are no longer part of the Oracle Hyperion Enterprise Performance Management System Installation Start Here."
However, the EPM System document references this page:
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
which contains an xls file for "oracle_hyperion_epm_system_certification_release_11.1.2.0.xls", which does not specifically mention IOP.
Can someone please direct me to suggested specifications for a dedicated IOP server running 11.1.2.0?
Thank you.
Donald

In our install guide we document the server and client configurations that are supported. The recommended spec would depend on the model and there are no specific sizing guidelines as of now. We do have some guidelines for calculating the block cache size and that is for computing memory size.

Content Server config for production system - oac0

Hi all
We are setting up content server for our ERP 2005 system, and I am wondering what best practice is for our scenario.
We have one content server (CST) for development and test systems on host A, and one content server (CSP) for production system on host B. The Archive link configuration in dev and test points to CST. When this is transported to production, it will point to the wrong content server and I will have to reconfigure the archivelink in production to point to the correct content server (CSP).
What is the best way to set up the production system to point to the content server CSP on host B? Should I define a new content repository in t-code oac0 in dev, and transport this to production? Should I define the new repository directly in production system??
Please advise.
Best Regards,
Thomas

Hello,
I had the same problem a few years ago with R/3 4.7.
I don't think there is a perfect solution but here is what I did :
In the DEV system, in OAC0, I created 2 content repositories, one for the test sytem and one for the production. I transported these 2 content repositories in the production system.
In the DEV system, in OAC3, I created temporary links from my business objects to my production content repository. I released the request order.
Then I deleted these links which are wrong in the DEV system. I transported the order in the R/3 production system where these links are right.
In the DEV system, in OAC3, I then created the links from my business objects to my TEST content repository. I released the second request order.
So my config is now OK in my test and my production system.
When we refresh the DEV system by a database copy from the production system. We just have to reimport the test request order to switch the links to be OK on the DEV system. We don't have to recreate the test content repository as it was defined als oi nthe production system.
I am not sure that this is clear but this works for us with no problems since 2002.
I hope this helps.
Olivier

Recommended Server requirement for MS SQL Server

Hi Guys,
Good day. Just have a questions for the tenured Server and DBA administrators.
I'm currently assigned to setup a new Server(HP Gen9) and used MS SQL 2012.
Just want to ask if what is your recommended RAM for Multiple Database in 1 SQL instance? 1 Database is 20 GB in file size, 4 others are 5 GB.
Also, is it okay that my design is only 1 SQL instance, than multiple SQL instance for each database
Thanks,
Trex

Depends on licensing and application requirement. If application demand segregation we can go-ahead with multiple instances.
"When multiple instances of the same SQL Server edition and language are installed on the same computer, a single copy of the license terms will apply to all instances of that edition and language"
http://msdn.microsoft.com/en-us/library/ms143522.aspx
Is this a migration? How does the current configuration looks like? Depending on the total memory on the server allocate memory to the database instance by setting min and max memory configuration.
You may need to leave some memory for the OS and hope this is Sql Server specific server and no other application reside on it.
Thanks,
-SreejitG

A sample server specification for Oracle RAC environment

Hi,
Our project has decided to change the single instance database to a RAC environment. Can any one provide a sample server specification to be analysed based on our project.
For example minimum processor/RAM....
Thanks

This is the simplest installation you can get, but if you want to do a fast response file based installation, there it is.

Server Specifications for Interactive Reports on V11

We are planning on installing Interactive Reports for Hyperion 11 on a Windows server.
Does anybody know where I could get the server spec or know what the recommended CPU, RAM and Storage requirements are for IR v11.x.

Welcome to the forums !
This forum is meant for issues related to Oracle documentation. Pl re-post in a more appropriate forum such as "Hyperion Query And Reporting" Hyperion Query and Reporting
HTH
Srini

SQL server licencing for PABX system

Hi All. I'm looking for some guidance on how to correctly licence a SQL server for use as part of a PABX system. The PABX system supports 14 end users with a similar number of devices. As such, can I licence this server on a CAL basis for either 14 users
or 14-odd devices or do I need to licence per core?
Basically, are the devices in this instance the 14 configured phones or do I need to count every person who phones in as a device or user as well?

Since the question is a license issue, you can call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist, and you can get more detail information from there. You can also visit
the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mplahome.mspx
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Server specifications for 1000 concurently connected users.

Dear all,
we want to prepare a server having windows server 2003 to install oracle database 10g. the same server will act as an application server as well.
we want to know how much size of the following we need if we have 1000 concurrently connected users;
1.RAM
2.Processor
Thank you.

the same server will act as an application server as well.
BAD Idea. Really very bad. IO patterns on an application server are completely different from a database server.
Disk will be a bottleneck.
And server will be Single Point of Failure,
And why Win2003 and not Win2008?
Sybrand Bakker
Senior Oracle DBA

Minimum server specification

Can someone point me to the minimum server specification for iPlanet metadirectory ver 5.1. I am running this on a Blade 100 and Netra T1 server, and need to know the specs if this is supported?

The minimum system configuration is mostly governed by the no. and size of entries it is suppose to flow. Pls. check the Hardware Sizing section of Sun ONE Directory Server Installation and Tuning Guide.
Kirit.

Best Application Server Specificatin for Application Environments

Hi Guys,
I am juz more than curious and excited to know about using an Application Server which would be best suited for development environ and other phases (Testing and Production). Anyone plz do lemme know how do I go about in giving app server specification for a web application's (as heavy as 1 lac hits / users) load management and performance optimization.
Hope I am clear with my query.....Please do help me out in answering my query...
Thanks in Advance
Kishore

Hi,
Since Sun App Server is a Sun Product it would be better if you go for it because of comaptibility. However I have worked with Tomcat also and didn't face any problem. Since you have told you are a newbie it would be better if you start on Tomcat a handling tomcat is much easier as compared to Sun App Server.
Regards,
Zebra8

Server 2012 R2 - The system failed to register host (A or AAAA) resource records (RRs) for network adapter

We seem to be having an issue recently after introducing new Windows Server 2012 R2 servers where they fail to register DNS correctly. The Windows Firewall is off and the servers are on the same VLAN with no firewalls between them.
When I do an ipconfig /registerdns or wait 24 hours for the system to try we get the following error:
The system failed to register host (A or AAAA) resource records (RRs) for network adapter
with settings:
Adapter Name : {4A0ECF05-193F-4BEA-AA46-BEC593BA752B}
Host Name : SRV-DATA
Primary Domain Suffix : internal.local
DNS server list :
192.168.0.50, 192.168.0.42
Sent update to server : <?>
IP Address(es) :
192.168.0.99
The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative
for this name does not support the DNS dynamic update protocol.
To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
On our DNS server we have set for the internal.local zone Secure Updates only so that looks good because it is Active Directory that should be handling this authentication to update the record I assume. Just to mention that when also doing an ipconfig /regsiterdns
the update fails within a few seconds.
Source: DNS Clients Events
Event ID: 8018
User: NETWORK SERVICE
This issue is only affecting Windows Server 2012 R2 clients and testing with Windows Server 2008 R2 clients works no issues. So is this a mis-configuration or a bug with Windows 2012 R2? I have checked all DNS settings on client / server which all look good
to me so reaching out now to see if anyone has any ideas?
Environment:
- Windows Server 2012 R2 Domain Controllers (Forest/Domain Levels 2012 R2)
- Windows Server 2012 R2 Client machines (Physical and Virtual)
- Windows Server 2008 R2 Client machines (Physical and Virtual)

The zone is configured as "Secure Only"
The PDC is the SOA for the zone
I dont have a packet capture from the DC, only the client.
The query you asked me to run is too long to paste in here, however this is the DNS zone it cannot update:
NotifyServers :
SecondaryServers : {10.2.0.3, 10.2.0.5}
AllowedDcForNsRecordsAutoCreation :
DistinguishedName : DC=internal.local,cn=MicrosoftDNS,DC=ForestDnsZones,DC=internal,DC=local
IsAutoCreated : False
IsDsIntegrated : True
IsPaused : False
IsReadOnly : False
IsReverseLookupZone : False
IsShutdown : False
ZoneName : internal.local
ZoneType : Primary
DirectoryPartitionName : ForestDnsZones.internal.local
DynamicUpdate : Secure
IsPluginEnabled : False
IsSigned : False
IsWinsEnabled : False
Notify : NoNotify
ReplicationScope : Forest
SecureSecondaries : TransferToSecureServers
ZoneFile :
PSComputerName :
CimClass : root/Microsoft/Windows/DNS:DnsServerPrimaryZone
CimInstanceProperties : {DistinguishedName, IsAutoCreated, IsDsIntegrated, IsPaused...}
CimSystemProperties : Microsoft.Management.Infrastructure.CimSystemProperties

What is posted availability specification for Windows server 2012? 2012R2?

I am trying to put together a high availability solution and I want to know what the availability 'claim' of the individual components would be. What is the availability specification for Windows server 2012 and Windows Server 2012R2?(for example 99.9%
availability for the O/S itself). This would be in a non clustered or Load Balanced state. Just a single server running the O/S.

Hi,
SLA requirements determine how components such as storage, clustering, and backup and recovery factor into your organization.The term high availability is meaningless until you define how to measure it. IT shops measure high availability as the percentage of
time that systems are available, but the provider and consumer of high-availability services must agree on what constitutes availability and how the time is measured.
The related KB:
Service Level Agreement Review
http://technet.microsoft.com/en-us/library/cc546625.aspx
High-Availability System Architecture
http://technet.microsoft.com/en-us/library/cc750543.aspx
Service Level Agreement Review
http://technet.microsoft.com/en-us/library/cc546625.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Best Practices for Packaging and Deploying Server-Specific Configurations

We have some server-specific properties that vary for each server. We'd
like to have these properties collected together in their own properties
file (either .properties or .xml is fine).
What is the best-practices way to package and deploy an application (as an
ear file), where each server needs some specific properties?
We'd kind of like to have the server-specific properties file be stored
external to the ear on the server itself, so that the production folks can
configure each server's properties at the server. But it appears that an
application can't access a file external to the ear, or at least we can't
figure out the magic to do it. If there is a way to do this, please let me
know how.
Or do we have to build a unique ear for each server? This is possible, of
course, but we'd prefer to build one deployment package (ear), and then
ship that off to each server that is already configured for its specific
environment. We have some audit requirements where we need to ensure that
an ear that has been tested by QA is the very same ear that has been
deployed, but if we have to build one for each server, this is not
possible.
Any help or pointers would be most appreciated. If this is an old issue,
my apologies, would you please point me to any previous material to read?
I didn't see anything after searching through this group's archives.
Thanks much in advance,
Paul
Paul Hodgetts -- Principal Consultant
Agile Logic -- www.agilelogic.com
Consulting, Coaching, Training -- On-Site & Out-Sourced Development
Java, J2EE, C++, OOA/D -- Agile Methods/XP/Scrum, Use Cases, UI/IA

The one draw back to this is you have to go all the way back to ant and the
build system to make changes. You really want these env variables to be
late binding.
cheers
mbg
"Sai S Prasad" <[email protected]> wrote in message
news:[email protected]...
>
Paul,
I have a similar situation in our project and I don't create ear filesspecific
to the environment. I do the following:
1) Create .properties file for every environment with the same attributename
but different values in it. For example, I have phoneix.properties.NT,phoenix.properties.DEV,
phoenix.properties.QA, phoenix.properties.PROD.
2) Use Ant to compile, package and deploy the ear file
I have a .bat file in NT and .sh for Solaris that in turn calls theant.bat or
ant.sh respectively. For the wrapper batch file or shell script, you canpass
the name of the environment. The wrapper batch file will copy theappropriate
properties file to "phonenix.properties". In the ant build.xml, I alwaysrefer
to phonenix.properties which is available all the time depending on theenvironment.
>
It works great and I can't think of any other flexible way. Hope thathelps.
>
Paul Hodgetts <[email protected]> wrote:
We have some server-specific properties that vary for each server. We'd
like to have these properties collected together in their own properties
file (either .properties or .xml is fine).
What is the best-practices way to package and deploy an application (as
an
ear file), where each server needs some specific properties?
We'd kind of like to have the server-specific properties file be stored
external to the ear on the server itself, so that the production folks
can
configure each server's properties at the server. But it appears that
an
application can't access a file external to the ear, or at least we can't
figure out the magic to do it. If there is a way to do this, please
let me
know how.
Or do we have to build a unique ear for each server? This is possible,
of
course, but we'd prefer to build one deployment package (ear), and then
ship that off to each server that is already configured for its specific
environment. We have some audit requirements where we need to ensure
that
an ear that has been tested by QA is the very same ear that has been
deployed, but if we have to build one for each server, this is not
possible.
Any help or pointers would be most appreciated. If this is an old issue,
my apologies, would you please point me to any previous material to read?
I didn't see anything after searching through this group's archives.
Thanks much in advance,
Paul
Paul Hodgetts -- Principal Consultant
Agile Logic -- www.agilelogic.com
Consulting, Coaching, Training -- On-Site & Out-Sourced Development
Java, J2EE, C++, OOA/D -- Agile Methods/XP/Scrum, Use Cases, UI/IA

What are the recommended technical specifications to setup the Adobe Update Server?

I am looking to setup the Adobe Update Server for all our Creative Cloud users. I would just like to confirm what the recommended technical specifications are if we were to build the server in a VM.

Thanks for the response Ralph but I am looking for a more personal experience someone may have managing 200+ Macs via the OS X server and what their specs are.

Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)

Hi
In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
There is only one Job Server and the destinations are enabled in it
There is no Job server for Crystal Reports Job Server
Do i need to create it and how.

Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.

Recommended Server Specifications for GIS system

Similar Messages

Maybe you are looking for