Record a speech signal and save as a wav file?

Dear All:
I'd like to record a speech signal using one microphone and write/save as a .wav file. Can anyone help me on this issue.
I'm using 6024E PCI NI-DAQ 7.0.
Thank you
regards,
Jeffrey

Jeffrey,
Below is a link to a knowledge base that discusses the specifics in creating a .wav file and even includes an example of how to accomplish this with your daq board. Also, if you have a sound card, you can use the LabVIEW sound VI's to acquire a microphone signal through your sound card. Attached is the installer for the sound VI's for LabVIEW.
Wave File Creation
Attachments:
Sound_VIs_Installer_-_Win32.zip ‏2130 KB

Similar Messages

I need to capture streaming audio and save to a wav file

I need to be able to capture an audio stream delivered via ethernet using UDP protocol and then save to a wav file.
I currently can capture the data stream but do not know how to format the data to save it to a file. Our format is 16KS/s, 16bit, PCM, no compression.

Did you do the thing about searching in the example database. Let us use that as base for discussion. Those who put in some effort will be rewarded. Also check out the AU file format http://en.wikipedia.org/wiki/Au_file_format As it is big-endian http://en.wikipedia.org/wiki/Big-endian the numbers can be stored as is in Labview. Must players,matlab, etc can use the AU file format.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Open all pages in a PDF and save them as sequential files

I'm trying to make a script that will open all pages in a multi-page PDF and save them as sequential files, but I have had no luck with the simple script in the "Adobe Ilustrator CS5 Reference: JavaScript".
there example to open a PDF to a designated page does not work for me in Illustrator CS 5.
// Opens a PDF file with specified options
var pdfOptions = app.preferences.PDFFileOptions;
pdfOptions.pDFCropToBox = PDFBoxType.PDFBOUNDINGBOX;
pdfOptions.pageToOpen = 2;
// Open a file using these preferences
var fileRef = filePath;
if (fileRef != null) {
var docRef = open(fileRef, DocumentColorSpace.RGB);
if anyone can get me on the right path it would be appreciated.

Hi DuanesSFK,
you can open a PDF page on this way (tested with CS3 and 5):
//OpenPDFpage2.jsx
var uILevel = userInteractionLevel;
app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
// Opens a PDF file with specified options
var pdfOptions = app.preferences.PDFFileOptions;
pdfOptions.pDFCropToBox = PDFBoxType.PDFBOUNDINGBOX;
pdfOptions.pageToOpen = 2;
// Open a file using these preferences
//var fileRef = filePath;
var fileRef = File("~/Desktop/YourOwn.pdf");
if (fileRef != null) {
var docRef = open(fileRef, DocumentColorSpace.RGB);
app.userInteractionLevel = uILevel;
To open all pages you have to loop through all pages etc.
Easier for you:
Search here in forum for the "open pdf" script (I don't know the exactly name, it was written by CarlosCanto, ) This should always work for you.
Have fun

Hi, I'm an eBay seller and save old eBay auction files to my hard drive for future refence. Firefox no longer opens these files correctly (see below).

Hi, I'm an eBay seller and save old eBay auction files to my hard drive for future refence. These files which all use the same name but are saved in a different folder for each eBay auction no longer open correctly -- much of the eBay auction text information shows up for a split second and then disappears -- the area at the top of the saved eBay auction file then collapses -- the original eBay auction photo of the product shows up as well during that split second but disappears when the other auction text disappears. These eBay auction files open correctly when opened using Internet Explorer. In Firefox, Firefox adds some strange information at the end of the file name when it is opened which is not a part of the actual file name itself (i.e. here is the original file name which is the same for whatever ended eBay auction I open: eBayISAPI.dll.htm -- here is the altered file name after Firefox opens it: eBayISAPI.dll_files/eBayISAPI_data/eBayISAPI_002.htm#ht_658wt_1349 -- yes, it is that long -- the last part is slightly different for each separate auction file that I open). None of this happened until recently. The files open this way whether using Firefox 4.0, Firefox 3.6.16, Firefox Safe Mode 3.6.16, and Firefox Safe Mode 4.0.

Here is what I did:
1) In Firefox 4.0, I opened the Bookmarks on the Menu Bar at the top of the screen. I clicked on the Import and Backup menu. I then exported all my bookmarks to the PC's desktop using the default file name BOOKMARKS.HTML.
2) In Firefox, I opened the Add-ons menu under Tools on the Menu Bar. I clicked on the Prnt Scrn key on the top right of the PC's keyboard in order to obtain a screen shot of all the Firefox add-ons. I then opened Microsoft Word and pasted the screen shot using the Control V command (Ctrl V). I then saved the Microsoft Word file on the PC's desktop for future reference.
3) I then opened the Control Panel in the Start menu (accessed from the little Windows world globe on the bottom left of the screen -- the operating system is Windows 7).
4) In the Control Panel, I opened Uninstall A Program in the Programs section.
5) I uninstalled Firefox 4.0 clicking on the box "Remove my Firefox personal data and customizations" in order to remove whatever bug in my Firefox customizations was causing the two errors above (this is the MOST IMPORTANT PART of this whole process which is why I saved all my bookmarks as an HTML file and saved a screen shot of all the Firefox add-ons).
6) I then reinstalled my old Firefox 3.6.16 version obtained from the following link: http://www.mozilla.com/en-US/firefox/all-older.html (I am not yet in favor of using Firefox 4.0 -- you suppose you can reinstall Firefox 4.0 on your system if you want).
7) After Firefox 3.6.16 was reinstalled, I had to import all my old bookmarks. Under Bookmarks on the Firefox Menu Bar at the top of the screen, I clicked on Organize Bookmarks. I then clicked on the Import and Backup menu and then the Import HTML command in order the BOOKMARKS.HTML file saved on the PC's desktop.
8) I then re-added all my favorite Firefox add-ons by clicking on Add-ons under the Firefox Tools menu and then clicking on the Get Add-ons command. I then searched for all the old add-ons I wanted to re-add to Firefox using the Microsoft Word document on the PC's desktop saved with the screen shot of all the old Firefox add-ons on my system by I uninstalled Firefox 4.0.
9) I then opened one of the old eBay auction page files saved on my hard drive under the eBay default file name "eBayISAPI.dll.htm". The file opened perfectly with NO missing sections and no missing original eBay auction listing photo! the file looked exactly like it did as if I was logged into eBay and looking at the original ended auction.
10) I then opened Hotmail in Firefox and received NO "update your browser" message! I was able to open all my old emails and write and send new emails (with all my Contacts being automatically detected when I went to type in the email address of the person I was sending the new email to)!
In summary, you need to uninstall Firefox 4.0 being sure to click on the "Remove my Firefox personal data and customizations" box during the uninstall process. Be sure to save/export all your old bookmarks before the uninstall process and make a note of all your old add-ons. Then reinstall whatever version of Firefox you are comfortable with. Apparently, my Firefox customizations had become corrupted at some point; removing the Firefox customizations during the uninstall process allowed any future Firefox version installed on my PC to start over with a clean slate (these corrupted settings would show up in whatever version of Firefox I had installed on my PC so removing them during the uninstall process was the key to solving all my Firefox bugs). I hope my suggestions help to solve your problem and good luck!

Is there any way to edit and save an existing spreadsheet file that was not created from my iPad? I get excel spreadsheets emailed to me and would love to edit them on my iPad and not ever use my PC.

Is there any way to edit and save an existing spreadsheet file that was not created from my iPad? I get excel spreadsheets emailed to me and would love to edit them on my iPad and not ever use my PC.

Thanks. I tried an app called Office2HD and it does exactly what I need. I can even email my edited file from this app.

Which Version of Adobe do I need to be able to "extract" a page from a existing file and save/download to another file?

Which Version of Adobe do I need to be able to "extract" a page from a existing file and save/download to another file?

Acrobat Pro or Standard.

Png blurry/pixelated after i used the vanishing point filter and save as a VSP file?

Hi,
Why are my png blurry/pixelated after i used the vanishing point filter and save as a VSP file? And i'm using a high res picture. I'm using PS CC.
I got some screenshots.
This the result of the png
Thanx in advance

As I posted before, I would use it more if it had some of the functionality I need. I need to be able to change the opacity of the image I'm pasting so I can see EXACTLY where my overlaid image will register with the bottom image. VP seems to require a ton of processing and I wonder if maybe the software is handing off some of this work to the graphics card for calculating. Maybe this would explain that apparently not many people have run into an error that gets embedded in the file. Although my G5 is Apple stock, not super-modified.
craig

Catch the image of JTree and save it as a file

There is an JTree and it has a few nodes.
And there, I want to capture both the image of JTree and
the images of it's child nodes as they show in screen.
if possible, I want to capture image of all expanded nodes in tree and
save them as jpg file.
I try to capture the Image of JTree from JTree.createImage() method.
and I also tried to capture the images of child nodes
from JTree.getComponents() and capture images all of child nodes as they were.
I,however,get to know the method
Component.createImage() doesn't return the image that shows in screen as it was.
could anybody tell me the answer?

Hi,
don't know if I got you right, but what you want is a "screenshot" of the JTree, right ?
Try to paint the JTree in a BufferedImage and encode this as JPEG or whatever.
BufferedImage theImage = new BufferedImage(
      owner.getWidth(), owner.getHeight(), BufferedImage.TYPE_INT_RGB);
      Graphics g = theImage.createGraphics();
      g.setClip( 0, 0, owner.getWidth(), owner.getHeight());
      owner.paint( g);owner is your JTree or any other component you want.
Hope that helped.

Capturing audio from microphone and save it to a file

Hi!!
I'm searching for a code using JavaSound that allows capturing audio from a microphone and save it to a file.
thanks in advance and sorry for my English

Hi,
Check out these links.
http://developer.java.sun.com/developer/technicalArticles/Media/JavaSoundAPI/
http://java.sun.com/j2se/1.3/docs/guide/sound/prog_guide/chapter5.fm.html
Also this is a very good site for finding similar issue as yours.
http://www.jsresources.org/examples/audio.html
Hope this helps.
Regards,
Roopasri Vittal
Developer Technical Support
Sun Microsystems
http://sun.com/developers/support

How can i record sound and save it in a file..?

Can someone plz provide me a simple code for recording sound and saving it in a file..

Nope...all of the code to do that is complicated...and since you apparently can't figure out google, I'm afraid you're likely out of luck.

How to delete and edit particular line in a file and save it in same file ?

Hi,
I want to delete and edit text at particular line in a file.
But edit and delete should reflect in same file.
I have done googling for this but it results with using another file, that i dont want as i need to save changes in same file.
How can i do this?
Thanks in advance
Edited by: vj_victor on May 24, 2010 3:33 PM

I just want to make sure, this is the only way to do what i mentioned ? or it could be done another way !a) write the data to a new file
b) delete the old file
c) write the data to a newer file
d) delete the new file
e) rename the newer file to the old file name.
For a hint about still more ways to do this, search for the complete lyrics of One man went to mow, Went to mow a meadow...
db

A script that captures the coordinates of the mouse clicks and saves them into a file

Hello,
I'm trying to create a cartoon taking a movie (I've chosen blade runner) as base. I've got the real movie and I've exported all the pictures using VirtualDUB. Now I have a lot of images to modify. I would like to modify the actors faces with the faces generated by Facegen modeller. I'm thinking how to make the whole process automatic because I have a lot of images to manage. I've chosen to use Automate BPA,because it seems the best for this matter. I'm a newbie,so this is my first attempt using Adobe Photoshop and Automate BPA. I wrote a little script. It takes a face generated with Facegen modeller and tries to put it above the original actors faces. But it doesn't work very good and I'm not really satisfied,because the process is not fully automated. To save some time I need to write a script that captures the coordinates of the mouse when I click over the faces and that saves them into a file,so that Automate BPA can read these coordinates from that file and can put the face generated with Facegen Modeller above the original face. I think that Automate BPA is not good for this matter. I think that two coordinates are enough,X and Y. They can be the coordinates of the nose,because it is always in the middle of every face. It is relevant to knows how big should be the layer of the new face,too. This is the Automate BPA code that I wrote :
<AMVARIABLE NAME="nome_foto" TYPE="TEXT"></AMVARIABLE>
<AMVARIABLE NAME="estensione_foto" TYPE="TEXT"></AMVARIABLE>
<AMSET VARIABLENAME="nome_foto">br</AMSET>
<AMSET VARIABLENAME="estensione_foto">.jpeg</AMSET>
<AMVARIABLE NAME="numero_foto" TYPE="NUMBER"></AMVARIABLE>
<AMVARIABLE NAME="coord_x" TYPE="NUMBER"></AMVARIABLE>
<AMVARIABLE NAME="coord_y" TYPE="NUMBER"></AMVARIABLE>
<AMWINDOWMINIMIZE WINDOWTITLE="Aggiungere_layer - AutoMate BPA Agent
Task Builder" />
<AMWINDOWMINIMIZE WINDOWTITLE="AutoMate BPA Server Management Console
- localhost (Administrator)" AM_ONERROR="CONTINUE" />
<AMENDPROCESS PROCESS="E:\Programmi_\Adobe Photoshop
CS5\Photoshop.exe" AM_ONERROR="CONTINUE" />
<AMRUN FILE="%"E:\Programmi_\Adobe Photoshop CS5\Photoshop.exe"%" />
<AMPAUSE ACTION="waitfor" SCALAR="15" />
<AMSENDKEY>{CTRL}o</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="1" />
<AMINPUTBOX RESULTVARIABLE="numero_foto">Inserire numero FOTO di
partenza -1</AMINPUTBOX>
<AMINCREMENTVARIABLE RESULTVARIABLE="numero_foto" />
<AMPAUSE ACTION="waitfor" SCALAR="1" />
<AMMOUSEMOVEOBJECT WINDOWTITLE="Apri" OBJECTNAME="%nome_foto &
numero_foto & estensione_foto%" OBJECTCLASS="SysListView32"
OBJECTTYPE="ListItem" CHECKOBJECTNAME="YES" CHECKOBJECTCLASS="YES"
CHECKOBJECTTYPE="YES" />
<AMMOUSECLICK CLICK="double" />
<AMPAUSE ACTION="waitfor" SCALAR="10" />
<AMSENDKEY>{CTRL}+</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="20" />
<AMSENDKEY>l</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="429" MOVEY="281" RELATIVETO="screen" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="659" MOVEY="281" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="659" MOVEY="546" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="429" MOVEY="546" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="429" MOVEY="281" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMSENDKEY>v</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK CLICK="hold_down" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="131" MOVEY="99" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="99" MOVEY="162" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK CLICK="release" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMINPUTBOX RESULTVARIABLE="coord_x">Inserire coordinata X</AMINPUTBOX>
<AMINPUTBOX RESULTVARIABLE="coord_y">Inserire coordinata Y</AMINPUTBOX>
<AMMOUSEMOVE MOVEX="200" MOVEY="200" RELATIVETO="screen" />
<AMMOUSECLICK CLICK="hold_down" />
<AMMOUSEMOVE MOVEX="%coord_x%" MOVEY="%coord_y%" RELATIVETO="position" />
<AMMOUSECLICK />
and this is a short video to explain better what I want to do :
http://www.flickr.com/photos/26687972@N03/5331705934/
In the last scene of the video you will see the script asking to input the X and the Y coordinates of the nose. This request is time consuming. For this reason I want to write a script that captures automatically the coordinates of the mouse clicks. The only thing to do should be click over the nose and the script should make the rest. As "c.pfaffenbichler" suggested here : http://forums.adobe.com/thread/775219, I could explore 3 ways :
1) use the Color Sampler Tool’s input with a conventional Photoshop Script.
2) use After Effects would provide a better solution.
3) Photoshop’s Animation Panel might also offer some easier way as it might be possible to load two movies (or one movie and one image) and animate the one with the rendered head in relation to the other.
Since I'm a totally newbie in graphic and animation,could you help me to explore these ways ? Thanks for your cooperation.

These are the coordinates of the contours of the face that you see on the picture. Can you explain to me how they are calculated ? The coordinates of the first colums are intuitive,but I'm not able to understand how are calculated the coordinates of the second one.
Thanks.
1 COL 2 COL (how are calculated these values ?)
307.5000 182.0000 m
312.5000 192.0000 l
321.5000 194.0000 l
330.5000 193.0000 l
335.0000 187.0000 l
337.0000 180.5000 l
340.0000 174.0000 l
338.5000 165.5000 l
336.0000 159.0000 l
331.5000 153.0000 l
324.5000 150.0000 l
317.0000 154.0000 l
312.5000 161.0000 l
309.0000 173.0000 l
307.5000 182.0000 l
Message was edited by: LaoMar

How do I find and save the background music file of my Flash site?

I see that the background music in my Flash site is located in a symbol called muz. When I click the properties of this symbol, the sound file's location is listed as .\flash\sound\muz.wav I couldn't find that sound sub-folder in the flash folder nor could I find the file. I tried doing a search to look for the muz.wav file in my computer but it could not be found. Does anyone know how I can find and save this file? Can the symbol somehow be exported and the sound file be extracted that way?

I copied and pasted the symbol into an empty .fla file. This new .fla file is just 1 frame. Can you tell me what you mean by "spreading" it along the timeline? When I tried exporting it to a .wav file (as just 1 frame in timeline), I only hear a fraction of a fraction of the first note of the music in the generated .wav file. The music is heard fine in its entirety when previewing the .fla file (F12).
By the way, in the symbol's properties, there is an option to "Export for ActionScript" and an option to "Export for runtime sharing". Do you think any of these would work?

Read data in real time and save as an excel file

Hi,
I want to write a LabVIEW progarmme which able to read data in real time and save it as an excel file from Varian Vacuum muli-gauge.
It is using RS232 port.
Can anyone give me some examples or point me in the right direction?
I am a beginner of LabVIEW. Hope anyone can help me.
Thank you very much!!
Joanne

Thanks for your reply.
I just use MAX to verify that the rs232 port is operational.
However, there is an error (please refer to the attachment).
One possible reason is in MAX I am trying to do the default command *idn? ...but it doesn't work.
I read the vacuum multi-gauge manual but I don't know which command should I use...
I attached the manual and can you tell me which command should I use?
Or can you tell me other possible reason for this error code?
Thank you very much.
Joan
Attachments:
Varian Multi-Gauge Controller.pdf ‏2747 KB
error1.JPG ‏111 KB

In action script, how would I be able to capture animation on the stage and save it to a file

using action script how would I be able to capture video that's playing on the stage and save it as a file

Are you still using iphoto?
If so you should NOT move the iphoto library to the TC and use it.
Apple says you will corrupt the library doing this.
http://support.apple.com/kb/TS5168
Although mostly about FAT32 it adds network drives.
http://support.apple.com/kb/HT1198
Now what I cannot tell you is if the same rules apply to the new photo app. Apple might have fixed the problem.
For iphoto you should offload the photos to USB drive plugged into your computer.. or any external drive.. the faster the interface the better.
Apple have explicit instructions for moving the library.
iPhoto '11: Move your iPhoto library to a new location

Record a speech signal and save as a wav file?

Similar Messages

Maybe you are looking for