Record playback is very slow between Flash Server and Flash

hi all
I have done server side recording successfully with red5 flash media server and can see
that the flv record is being created properly.
Then if I try to playback the record like
NetStream.play("record.flv"), I see that stream playing is very very
slow, for both of audio and video.
And then if I try to playback the recorded file via using the
filesystem path of it, everthing seems fine.
Problem occurs when I try to sucscribe and play the stream of the record.
PS : There is no problem with playing the published stream
(NetStream.play("streamName"))
Does anyone have an idea about this issue?
If you need any additional information, please let me know.
Thanks in advance
Regards

Hello Fabio,
Just for confirmation.
Is the Integration Services is updated on all VMs on that particular host? IC version.
Could you please compare the vNIC properties/advanced between the functioning VM and the slowest VM network?
All VMs have one vNIC or more than one?
How are you copying out data from within the VM? \\IP Address\ OR \\DNS name\ ?
Is the file transfer issue around the same two VMs?
Could you please double check the Adapters and Bindings priority under
Network Connection\Advanced\Advanced Settings?
Regards,
Charbel Nemnom
MCSA, MCSE, MCS, MCITP
Blog: www.charbelnemnom.com
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if
a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Record playback is very slow between Flash Media Server and Flash

hi all
I have done server side recording successfully with red5 flash media server and can see
that the flv record is being created properly.
Then if I try to playback the record like
NetStream.play("record.flv"), I see that stream playing is very very
slow, for both of audio and video.
And then if I try to playback the recorded file via using the
filesystem path of it, everthing seems fine.
Problem occurs when I try to sucscribe and play the stream of the record.
PS : There is no problem with playing the published stream
(NetStream.play("streamName"))
Does anyone have an idea about this issue?
If you need any additional information, please let me know.
Thanks in advance
Regards

In a nutshell flowplayer delivers the video through your web
browser. It does this via http protocol (port 80) and progressive
download on any web server
Progressive download finds the video on the server and plays
it back through the player as it is being downloaded. 2 important
things to take from this are 1, the video is being downloaded to
the clients hard drive, at the end of the playback they will have a
copy of your video that they can do whatever they like to and
repost it somewhere else. 2, It plays back as it downloads, meaning
if I'm viewing a 10 minute video from your site and want to skip
ahead to the middle or end I have to wait for the whole video to
download before viewing those segments. Your web host by the way
will love you for progressive download because it will appear as
though your transfer rate has gone through the roof. Once the
request for the video is made there is no turning back, the client
gets the whole thing whether they watch it or not.
Flash media server uses the rtmp protocol. This protocol is
an open socket protocol through port 1935. This is a two way street
essentially. When the user views a video using FMS they basically
get only enough of the video to keep the connection open and
satisfy the required buffer to assure clean playback. The bytes of
info that carry the video only go to the users memory, not the hard
drive. This allows the user to jump back and forth around in the
movie without having to wait for the whole thing to download.
Hope that helps.

Shell recording takes place very slow with nouveau driver on gnome

Shell recording takes place very slow with nouveau driver on gnome(specifically gnome-shell).But when I used the nvidia-prop. driver,it just recorded fine.Are any other arch+nvidia-card users experiencing the same issue or it has got to do something with fps in dconf.(or it is a specific problem with my nvidia card).
Last edited by PranavG (2011-10-02 13:46:05)

It happened to me and has been for a long time. I got a new laptop about a month ago -- an i7. Though it's not as long as it was on my old desktop, it happens on this machine too. It happened right from a fresh install. I think it's just what Gnome does. I have no answers.

Replication between Oracle Server and MS SQL Server

Hello,
Does anybody know of a well known or reliable software that can do data replication between Oracle Server and Microsoft SQL server.
I suppose I can write my own version using Heterogenous Services in Oracle but I would like to know if such an automated replication between Oracle and SQL is available commercially.
Thank you.

Viacheslav Ostapenko wrote:
Sorry, Aman,
I couldn't find any info about replication to MS SQL. Is it possible at all? Could you provide link where we can read about this? It could be very interesting.Sorry Viacheslav, even I couldn't find anything for the same. I am not sure that it can be done or not, I haven't heard anyone in my contact doing so. The only place where I have seen Streams being used around me is within Oracle db only. May be someone else can help if he/she has done it.
Aman....

Diff. between content server and archive server(SARA on content server)

I am very interested about difference between content server and archive server. Is there content server supplied by SAP and archive server by third party producers or something else?
If so dditionally what needs to be done to archive data (via Sara) on content server. I did it on sap R/3 4.0 on an archive server. Is it huge difference to do it on 4.7x2 on content server?

Hey,
The content server is used to save documents,
and SARA (and other third party producers) are used to archive old data.
For example:
You should use Content server - When you need to save un-structured data about worker (e.g: pictures, documents and etc) .
You should use SARA (and other third parties) - When you need to move to archive old
worker which have left your organization before 5 or more years (there for they are not relevant for you)
Here is some more information about Content server
from help.sap.com:
"Therefore, besides the SAP database, an external content server is always available in every SAP system installation. In this way, the necessary technical infrastructure is provided for all document-centric applications and business scenarios that do not require a long-term archiving solution"
Here is some more information about SARA and archiving
from help.sap.com:
"Data Archiving removes from the database application data from closed business transactions that are no longer relevant for the operational business. The archived data is stored in archive files that can be accessed by the system in read-only mode."
for more information:
http://help.sap.com/saphelp_nw70/helpdata/en/8c/e9ddbb5d9a524bbb7854d31b963248/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/73/c335406ee32e34e10000000a155106/frameset.htm

Difference between application server and central instance

Hi everyone,
whats the difference between application server and central instance and message server. where it will be installed. and how?
Regards
Basis Fresher

Hi,
just want to clarify that is is not correct that only one enqueue process can be configured on the CI.
Please see the documentation within transaction RZ11 for the parameter Parameter : rdisp/wp_no_enq
Short description : number of enqueue work processes
Parameter description :
You can use this parameter to define the number of enqueue work processes for the instance.
Ensure that a value >0 is only set on the central instance that provides the enqueue server (instance rdisp/enqname ). One enqueue work process on the central instance is normally sufficient (rdisp/wp_no_enq = 1); only in very large systems can a higher value be useful.
Kind Regards
Thomas Alt

Different between shared server and dedicated server

could you explain difference between shared server and dedicated server.

Oracle has two modes, a shared server mode and a dedicated server mode. In dedicated server mode (the default), the Oracle server creates one process per connection.
This quickly limits the number of connections the Oracle Server can support due to the following:
1.There is an OS limit on how many processes/file descriptors can be supported
2.Oracle has an internal PROCESSES parameter that prevents it from launching more than the specified number of processes.
When it is anticipated that these limits may be exceeded, which frequently happens for 50-100 concurrent connections, you should either configure Oracle in shared server mode or increase the limits above, so that many concurrent connections can be supported by each Oracle process. Oracle states that running in shared server mode is slightly slower than in dedicated server mode.

Firefox 12 is very slow to load pages and if two tabs are opening it lags.

Firefox 12 is very slow to load pages and if two tabs are opening it lags. I've tried everything (e.g virus, defrag, I've created a new profile in "run", etc). I've had my router/line etc all checked and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help as it's driving me nuts.

I have the exact same problem.
Not only does it load pages very slowly, sometimes the page will stop for a good 45 seconds and stop loading, only to finish it much later.
Something is wrong with Firefox 12, it shouldn't be this slow.
How is that each version is progressively worse than the one before it?.
Stop releasing so many versions Mozilla, release one that works and build from there.

What are the differences between application server and webserver

pls give the differences between application server and web server with examples

Google.
Example
http://www.google.ca/search?hl=en&q=Do+your+own+damn+searching&meta=

Updated to LR 5.4, images now importing extremely slow. After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast.

After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast. Canon,Nikon, Leica and Fuji files all rendering slow. iMac 2.9 ghz 16gb RAM OSX 10.8.5. Catalogs and images are kept on external drives. Drives running fine. Really need a fix on this since I'm norally imported and processing at least 4,000 images per LR Catalog. Is there way to revert back to 5.3? I can't use 5.4 is its current state. Thanks.

Download LR 5.3 and install it
By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4

I amexperiencing a very slow log in's and speed to my desktop is very slow also. What is the cleanup I have to do to make this faster

I amexperiencing a very slow log in's and speed to my desktop is very slow also. What is the cleanup I have to do to make this faster

How large is your hard drive and how much hard drive space do you have left?
Sluggish Finder - Bunch of icons on your desktop? An overcrowded desktop slows down your Mac.
Get rid of needless Finder calculations - Open a window in Finder/View/Show View Options: ensure "Calculate All Sizes" option is unchecked.
Internet related - It's likely that your broadband connection is the bottleneck. You can check your speed on http://www.speedtest.net to see how fast your connection is. If your web browser specifically performs slowly, quit and relaunch it.
If browser remains sluggish, empty its cache.
Safari/Empty Cache
Firefox/Preferences - select the Network tab of the Advanced preferences and click the "Clear Now" button in the "Offline Storage" area.
Application related - Launch "Activity Monitor" - Applications/Utilities - click the CPU heading and see what float to the top. If an application takes up a large chunk of CPU and won't let it go, it could be dragging down your Mac's performance. Quit it by clicking the Quit Process button at the top of the Activity Monitor window.
Too little ram - max out your ram.
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. Which model Macbook Pro are you using?

My 2nd generation Airport Extreme very slow via wireless (5 and belows mbps) wired over 20. Please help!

My 2nd generation Airport Extreme very slow via wireless (5 and belows mbps) wired over 20. Please help! What could it be?

It is very possible that you may have some form of Wi-Fi interference nearby that is preventing your AEBSn from providing a clean RF signal on the 2.4 GHz band.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

Communication protocol between Admin Server and Managed Server

Hello - I am hoping someone can help me here to understand the communication protocols used in my setup.
Here is my understanding of the protocol that are used between each component.
End User <--->HTTPS<--->LoadBalancer Device<--->HTTPS<--->Web Server<---->HTTPS<--->WebLogic Server(Managed Server)<--->LDAP/JDBC<-->Data tier components
AdminServer<--->T3<--->Managed Server i.e. The communication protocol between Admin Server and Managed server is T3
The communication protocol between Managed Servers running in one cluster on two seperate machine is What?
Thank you.

Hello, interesting question.
In the documentation " [cluster multicast communication|http://download.oracle.com/docs/cd/E13222_01/wls/docs90/cluster/features.html#1007001] " don't specify the used protocol to pack the information for example in a session replication.
Although in a session replication all objects must be serializable i don't think rmi protocol is used.
I hope some expert give us some light in this issue :-)
http://download.oracle.com/docs/cd/E13222_01/wls/docs90/cluster/features.html#1007001

My Macbook is becoming very slow on start up and operation

My Macbook is becoming very slow on start up and operation. I have tried Mac Keeper but my small 2GB ram is always gone in the simplest of operations.
Any help would be usefull

Hello Chris,
A variety of things could be causing the slow startup. The first place I would look is at the Login items on your MacBook to see if there are items in this list that are set to automatically start. Having applications automatically start will increase startup time. This article has the steps to do this:
Mac OS X 10.6: If items automatically open when you log in
http://support.apple.com/kb/PH6811
The steps from the article should work for Mac OS X 10.4-10.8; the only difference in Mac OS X 10.7 and 10.8 is that the Accounts icon is named Users & Groups:
To permanently prevent items from opening at login:
Choose Apple menu > System Preferences, and then click Accounts.
Click Login Items.
Select any items you don’t want to open automatically, and then click the "-" button.
If you are still experiencing a slow startup after that, you might want to try the steps in the following article:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
I hope this helps!
Best,
Sheila M.

Very slow processing on LSMW and IFS access

Hi all,
we have a very slow processing on LSMW and IFS access. I believe it was slow all the time in the past. This LSMW transaction only converts some data, which are stored in a flat file in the IFS and stores it again into a flat file in the IFS. It is reading the data from IFS and writing again the data into the IFS.
IFS is not fast, I know. But do you have an similar experiences with such LOAD ?!
R/3 Enterprise 4.70 shows with transaction SM50 the following lon running job:
4 BGD 65988    waiting         Yes
5 BGD 65989    waiting         Yes
6 DIA 85421    running         Yes                    1      SAPLTHFB   100 USER1
7 DIA 65993    running         Yes                    11500 /1CADMC/SA 100 USER2
8 DIA 65994    waiting         Yes
9 DIA 65995    waiting         Yes
The WRKACTJOB Display shows:
This means for me the job is not doing so much with the database. Only 439 I/O's in 21 minutes. This is nothing. I have tried to give to this job Priority 19, but this is not the reason, the job is not going faster.
Work with Active Jobs
02.07.08 1
CPU %:    89,0     Elapsed time:   00:21:25     Active jobs:   895
Subsystem/Job Type Pool Pty      CPU Int    Rsp AuxIO CPU %
      WP06         BCI     2   20     395,2                136    0,0
      WP07         BCI     2   19   10274,0                439   12,7
      WP08         BCI     2   20    1156,0                  8    0,0
      WP09         BCI     2   20     874,3                  6    0,0
The WRKSYSSTS Display shows: This means for me, the is no memory lack.
Sys      Pool   Reserved    Max ----DB----- --Non-DB--- Act-   Wait- Act-
Pool    Size M   Size M     Act Fault Pages Fault Pages Wait   Inel   Inel
1    5000,00   1448,43 +++++    0,0   0,0    0,4   0,5   94,9    0,0    0,0
2   60340,00     44,65   3500   51,6 6335 113,4 364,1   7887    0,0    0,0
3     128,00      0,00     10    0,0   1,3    0,2   0,8   17,2    0,0    0,0
The WRKDSKSTS Display shows no problem in DASD.
I/O   Request   Read Write   Read Write    %
Rqs Size (K)    Rqs   Rqs     (K)   (K)   Busy
11,5     12,4     3,0    8,4   13,2   12,1     2
13,2     10,2     1,5   11,6    7,0   10,6     1
10,6      8,8     3,5    7,0    8,2    9,2     2
13,8     12,4     4,2    9,5   10,1   13,5     2
8,3     71,3     7,5    0,8   78,4    7,4     5
17,7    123,6    17,5    0,2 125,2    4,0     9
27,0     83,1    25,7    1,3   87,1    4,3    10
26,9     95,0    25,6    1,3   99,6    5,8     9
16,9    115,4    16,2    0,7 120,3    4,0     8
37,3    116,7    37,0    0,2 117,3   18,0    13
21,4     94,0    20,3    1,0   98,6    6,2     7
12,7     72,8    11,5    1,1   77,6   26,8     6
13,5     85,1    12,3    1,1   92,0   12,8     5
Any idea, here ???
best regrads,
Carsten Schulz
Teamleader SAP-Basis, ebmpapst Mulfingen, Gemany

Hi together,
thanks for answering so fast.
The jobs read from the sysbas-IFS   /usr/sap/a/b/ and writes to /usr/sap/SID/DVEBMGS00/work/ also in the sysbas-IFS.This IFS is not remote. Not through the QfileSrv.400 mechanism.
And yes, we have a HA solution. We have two IASP's on two different iSeries and are using XSM to mirror the data.
I have tried to increase the speed by switching off the XSM mirroring, but the speed does not increase. Sorry.
best regards,
Carsten Schulz

Record playback is very slow between Flash Server and Flash

Similar Messages

Maybe you are looking for