Record sound from microphone with flash player lower than 10

Hello,
Is it possible for me to record sound from a microphone using a lower version of flash player, say Flash Player 9?
Thanks
PM

As I know it's possible with Player 9:
Package
flash.media
Class
public final class Microphone
Inheritance
Microphone EventDispatcher Object
Language Version :
ActionScript 3.0
Runtime Versions :
AIR 1.0, Flash Player 9

Similar Messages

Webcam Video pauses when recording sound from microphone

I have a strange problem which i am encountering when recording and playing back webcam video.
I am developing a small application for recording webcam video and audio using FMS and playing it back later from FMS.
I am using AS 3.0, FMS 3.5 and flash CS 5.5
When i record only the video from webcam without sound from microphone the playback is fine. But when i record microphone sound also along with the video, and when i playback the video pauses right where the sound starts for 10 sec or more and then it starts playing. Towards the end the video pauses again and only the sound goes on till the end.
I tried setting the buffertime to 50 before ns.publish and ns.play but that didnt help either.
I tried using the flvplayback component and even their it pauses.
Any help is appreciated.

Haha, that is such a genius use of common sense! Thank you, I didn't think of that. I certainly will!
However, does anyone know if there is a way of adjusting the program of garageband to fix this issue? Using headphones certainly fixes the symptoms of my problem, but it doesn't actually address the root cause: garageband should only be recording the input through the microphone. I shouldn't need to wear headphones. (And doing so inhibits my ability to clearly hear myself play, and stay in tune.)

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Record Sound From a Microphone and convert it text file using jave applicat

Hi, I want source code for recording sound from a microphone which is connected to a sound card fixed in my machine,and convert that sound file to a text file , so that i can compare that text later with the command which i have stored already in my computer.How to do this in Java ? If any one could help me in solving this problem, it would be very helpful for me !

Have you looked into the JSAPI?
http://www.esus.com/docs/GetQuestionPage.jsp?uid=1471

Shutterfly requests 10.6 or lower to produce a video with flash player what can I DO?

SHUTTERFLY requests 10.6 or lower to produce a video with flash player what can I DO?

Install 10.6 or lower. http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html

No sound after installing flash player 11.3.300.262, have mozilla 13.0.01, working fine with flash player 11.2.202.233

Have no sound after installing flash player 11.3.300.262. Working fine with flash player 11.2.202.232

hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
http://forums.adobe.com/message/4483563
https://bugbase.adobe.com/index.cfm?event=bug&id=3210964

No sound with Flash Player under OSS in Linux

Flash 9 & Flash10 under OSS 4.1 with Opera or Firefox.
No sound at all on any flash using website. Websites such as
the BBC that have some content in RealAudio or Windows Media
formats work absolutely fine for non-Adobe content but Flash player
content produces no sound.
All other audio software works flawlessly - Skype, Real
Player, Mplayer, Kaffeine, Wine, Games (ETQW, Doom3 etc), Helix,
RhythmBox, Rosegarden.
Whatever the fault is, it's an Adobe fault - fix it.

Ditto with me. No sound with Flash Player in both IE and
Firefox. Sound works with other applications.

No sound with Flash Player (on line only) on Vista

No sound with Flash Player on both IE and Firefox online
only, on Vista.
On local hard disk, all is OK.
The firefox "about:cache" command on the mp3 file info says :
Data size: 0 and in IE it's the same
Thanks

Ditto with me. No sound with Flash Player in both IE and
Firefox. Sound works with other applications.

Record sound from M-Audio Firewire Solo input with S/PDIF

Hey there, I am using a m-audio firewire solo and connect it to my mac mini 2013 with firewire cable. If I try to record sound from my guitar, it is ok, however the sound from S/PDIF input cannot be recorded. I can see the sound signal from the mac input preference, however it just cannot be played or recorded. I have searched through the forum and found some people also have the same problem but just cannot solve it. Does anyone have some idea? Thanks.

Have you selected the correct Input pair in a stereo Logic channel strip? Standard s/pdif is a stereo signal.
Also, the M-Audio device may have to be set to slave mode as the incoming digital signal will have to become the master digital clock for the M-Audio unit.
The M-Audio unit should probably be set to 48kHz, it's doesn't do 96hHz does it?

Whats new with Flash Player 9.0

Hi all ..
i want to know whats new with flash player 9.0. what are the
new features etc..
thanks in advance

> He is using stopAllSounds to stop sounds that are in
seperate swfs on an html page. I tested it, and it does not work.
In my
> tests
> I put 3 swfs on an html page (not loaded into each
other). On the third swf I have the stopAllSounds command. It stops
only it's
> own sound in the third swf but has no effect on one.swf
and two.swf's sound.
> The thing is I don't know if stopAllSounds ever worked
across separated swfs before in players before version 9.
> tralfaz
I have confirmed his complaint. stopAllSounds works correctly
across multiple swfs on an html page using Flash player 8 but not
with Flash Player 9.
Incidentally, there is another big "improvement" (they say)
that prevents you from uninstalling the Flash 9 player without
running
their uninstaller exe. Unfortunately, their uninstaller
uninstalls all flash player versions (not just version 9) from ALL
browsers
so if just want to remove player 9 from IE you are forced to
also uninstall it from FireFox etc as well. Great, huh?
tralfaz

Is there a way to record sound from mac ????

using a mbp with snowleopard ... can I record mac output ?
Using microphone is ridicolus and let a lot of noise
Using soundflower I could not hear nothing while recording.
I nedd to hear and record sound outup from my mac like I did on windows... Is it possible without installing 3rd party software ?
And with 3rd softwares ?

I've tried both suggested software but I think I was not so clear.
I need to use sound from mac as an input while I could hear it.
I do not need a software that record sound from mac.
For example... if on windows i set input "wave out mix" instead of "microphone" I could use system sound as input... for example record a lot of error message's sound (PING!) with quicktime pro...
I would do the same thing with macosx...
I am surprised that such a simple thing could not be done with this OS but now I am looking for a 3rd party software that could solve this problem...
Both Audacity and Wiretap can record sound... but not let select me system sound as input.
I need to select system sound as input in order to record it (while I hear it) with every software I want to use... QT pro for example...
Is this so difficult?

Help with Flash Player- Not Playing

I recently went to a website where it said that i needed to
download the latest version of Flash Player. I followed the
directions and installed it, and the movie came up after
installation, but on the website it still said i needed to install
flash player again. I went through the other forum posts and tried
everything, but it still wouldn't show up. Then today i was on the
website and finally the video came up, but then when i refreshed
the page the video was gone and it again said i needed to install
the latest version of Flash Player. The video has shown up twice in
the past day, then says i need to reinstall again. I've tried
everything, but the videos just wont show up. Does anyone know how
to fix this for good?

JDB... your problems and solutions are different (and much
more complex). Read this CAREFULLY.
Printable, lovingly formatted versions of these steps, valid
as of 9/15/2007 are available. I recommend printing them and
following along with the print version:
.doc:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.doc
.pdf:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.pdf
The issue is this: You have multiple accounts on your XP
machine. One account plays Flash no problem, the other doesn't,
although both are Administrator accounts. Or possibly you have only
one account, and that account fails to play any Flash content. In
any case if you have ANY odd trouble with the Flash Player ActiveX
control for Windows as of September 2007, these should be your
steps. And yes, you need to do both sets of steps, in order!
The cause: This is usually caused by either or BOTH of the
following problems:
1. Leftover locked bits of an old Flash Player installation
2. Registry permission errors (aka 'ACL's)
OK so what do you do about this?
ONE: Identify possibly leftover Flash player bits
a. Open C:\WINDOWS\system32\Macromed\Flash folder.
b. Download the latest FP uninstaller from
http://www.adobe.com/go/tn_14157.
c. Run the uninstaller. If you get a notice saying you need
to reboot, then reboot.
d. Look at C:\WINDOWS\system32\Macromed\Flash folder.
e. Does any file ending in .ocx remain? (flash.ocx,
flasha.ocs, flash9d.ocx etc...)
e1. If no, then you don't usually have any leftover locked
bits.
You're done with this part of the problem, proceed to TWO.
e2. If yes, then that remaining .ocx file may be locked.
Right click it
and select properties and look at the version tab.
What is the version number?
f. Is the version number Flash Player 9.0.16.0 or earlier?
f1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9.0.16.0 and earlier"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
Yes, you'll need to know how to use the command line to do
this. If you're not
comfortable with that then take your machine to someone who
is!
g. Is the version number Flash Player 9.0.28.0 or higher?
g1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9 (9.0.28.0) and later"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
In both the D and E sections above you'll need to use the
specific name of the control that remains
in the C:\WINDOWS\system32\Macromed\Flash. So if you had a
stuck flash9b.ocx[DJM1] in the folder
and version was 9.0.28.0, your uninstall command would look
like this:
UninstFl.exe -u
c:\windows\system32\Macromed\Flash\Flash9b.ocx
That said, if you have trouble running these commands it
really is necessary to find someone who knows how
to use the command line, either a friend or a local
professional. Or spend some time learning about the
command line yourself.
h. RERUN the uninstaller you downloaded earlier. This should
get rid of the remaining (now unlocked) .ocx file and fix any
registry keys associated with it.
ALL of section "ONE: Identify possibly leftover Flash player
bits" is important. BUT this locked bit problem only happens on
maybe one out of 50 machines. So most people with installation
problems such as this are not going to have locked bits.
AND even after reinstalling you may still have continued
problems with Flash Player not being recognized.
Then we have to move on to section two..
TWO: Registry Permission Problems
We have been working on Flash Player failures caused by
Windows System Registry issues. We have not been able to determine
what’s causing these permissions to change. But that change
prevents the successful installation of Flash Player ActiveX
control (used by IE Windows).
Registry permission problems can be resolved using a tool
called SubInACL, built by Microsoft to correct system registry
issues.
Symptoms: What to look for:
1. If you install Flash Player on IE and are unable to see
Flash content on any webpage
2. After installation C:\WINDOWS\system32\Macromed\Flash
will have flash 9c.ocx in it but it failed to register
3. It appears that Flash Player installed correctly, but
unable to view Flash content
4. Flash Player works on other browsers, but NOT Internet
Explorer
5. If you are missing groups in HKEY_CLASSES_ROOT Advanced
Permissions
6. If you have run registry cleaners in the past, this may
have corrupted your system
Warning: The following solution involves the Windows System
Registry. Editing or manipulating the registry incorrectly can
result in serious system damage which may require re-installation
of the operating system. If you are not comfortable editing the
registry, then take your system to a professional. If you choose to
proceed, then it is essential that you create a complete system
backup and a Windows System Restore Point before proceeding. Adobe
Systems cannot be held responsible for damage resulting from this
information.
1. Select Start > Run
2. Type in “regedit”
3. Right click on HKEY_CLASSES_ROOT
4. Select Permissions
5. Select Advanced
For Vista
Compare your permissions with the ones in this screenshot.
http://www.supportflash.com/vista_key.png
For Window XP Pro or other flavors of XP
Compare your permissions with the ones in this document
“Troubleshooting system registry issues that prevent Flash
Player installation” (scroll down to the bottom of page).
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb400116
Notice any major differences, missing groups, incorrect
permissions?
How can you repair the System Registry, what's the fix
Download SubInACL from Microsoft to fix permission issues
that prevent the Flash Player Installation.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fb1634cb
NOTE: The Microsoft version of the .cmd script run by
SubInACL is not be run on any XP version other than Pro. HOWEVER,
the Adobe .cmd script in the above technote is tested safe for ALL
VERSIONS OF XP!!!
If you have a Windows System Registry permission issue that
sounds like the one described above, SubINACL may be the solution.
Please note that if you have this issue on multiple accounts on one
machine you’ll need to fix each machine individually.

LEASE HELP WITH FLASH PLAYER 9.0

I have tried and tried and tried and I cannot no matter what
I do download flash player. I have googled it and searched and I
cannot fix this. I cant view websites and my computer is constantly
freezing because a box comes up telling me that it doesnt work.
Well duh... Please help me I don't know what else to do??? By the
way I have dont everything that the support website suggests
atleast twice maybe three times and as I said I googled it so I
tried other things also. HELP!!

> He is using stopAllSounds to stop sounds that are in
seperate swfs on an html page. I tested it, and it does not work.
In my
> tests
> I put 3 swfs on an html page (not loaded into each
other). On the third swf I have the stopAllSounds command. It stops
only it's
> own sound in the third swf but has no effect on one.swf
and two.swf's sound.
> The thing is I don't know if stopAllSounds ever worked
across separated swfs before in players before version 9.
> tralfaz
I have confirmed his complaint. stopAllSounds works correctly
across multiple swfs on an html page using Flash player 8 but not
with Flash Player 9.
Incidentally, there is another big "improvement" (they say)
that prevents you from uninstalling the Flash 9 player without
running
their uninstaller exe. Unfortunately, their uninstaller
uninstalls all flash player versions (not just version 9) from ALL
browsers
so if just want to remove player 9 from IE you are forced to
also uninstall it from FireFox etc as well. Great, huh?
tralfaz

Errors on my web site started with Flash Player Release a few days ago (Mar 28, 2012)

Hi,
I have a Flash based video player on my website. This was designed and implemented based on an article vy Lisa Larson-Kelley. It has run flawlessly for several years. But, when I installed the lastest release of Flash Player a fedw days ago (Mar 28, 2012), I am now getting really annoying issues with the Flash Video Player.
I expect that I will need to place insturctions for users on how to roll back their version of Flash Player, since this latest version is broken.
But, many of the people who visit my site are not tech oriented (they are mostly friends and family, so, I don't expect that they will really roll back their version of Flash player.
I am 100% certain the issue is the latest version of Flash, since these errors never occurred until I installed the latest version.
On my work laptop, I have an older version of Flas (10.x.x) and this probelm does not happen. On my desktop PC at home, I have an older version of Flash 11 installed, and this problem does not happen (in IE9). The version of Flash PLayer 11 where the issue does *not* occur is 11.1.102.63.
On that same desktop PC, if I use Chrome, (which automatically defaults to the latest version of Flash which is 11.2.202.228, I get the problems. So, there is no question that the issue is with the latest version of Flash and not my hardware or drivers. I get the same problems on three different computers.
My website has a username and password. If someone from Adobe wants to replicate the problem send me an e-mail and I will send you the username and password.
The videoplayer on my website is at this url: http://www.jjjhi.com/TryMakingFlashVidPlayer/VideoPlaylist.html (but, you will need the username and password).
The issue is that sometimes (not always) when you select a video to play, inistead of the video loading into the panel as it should (sized as 1025 x 578), instead, all you see is the control skin. The video begins to play, but all you get is the audio. It looks like this:
You can recover from this error by using the skin control to make the image full screen, but, the video looks poor at fulls screen, because it is created at 1024 x 578. You can then get the correct size by returning from full screen, but, I don't want the pepole who visit my cif\deo playet to have to go all through that. Especially since most won't even know enough to try making the video full screen.
This doesn't happen for every video on my web site, but, once it *does* happen once...it will happen for every video selection you make.
This is unacceptable, and it absolutely a function of Flash version 11.2.202.228.
Adobe: Please fix this bug as soon as possible.
I've implemented an HTML5 based video player and have begun populating it with mp4 versions of my video clips, but, quite honestly, the playback using HTML5 is much worse than with Flash. I encoded the clips in the HTML5 player with the same Variable Bit Rates as in the F4V clips, and, in the HTML5 player, there are missed frames, and the audio can get out of sync. So, I *want* to keep using my Flash Based video player, but...if Adobe doesn;t fix this, I will just dial down my VBR till I find one that is slow enough to play in HTML5 and ditch Flash.
My HTML5 video player is here:
http://www.jjjhi.com/TryMakingNewVideoPlayer/NewVidPlayer_option1_jth.html
(again you need the username and password to use it, send me an e-mail and I will give them to you, I just don't want to post them in an open forum).
Here is a bitmap of the page: It is quite snazzy looking and is based on an excellent class from Chris Converse at Lynda.com. But, even though it is 'snazzy looking' the HTML5 player performs poorly on an under-powered machine (like my work laptop). It uses 100% CPU and misses frames and the audio loses sync. The same videos encoded with the same VBR for Flash (F4V) play great, *except for the new issue described above!!!!)
I Adobe can fix this issue with Flash Player 11.2.202.228 ASAP, else, I will have to 'downgrade' to an HTML5 based video player, that, quite honestly does not perform as well as Flash.
If you want to reproduce the problem contact me at my e-mail address: [email protected] and I'll send you the username and password.
You can then prove that the problem does not exist with prior version of Flash player (before 11.2.202.228) but *does* exist with this latest buggy release.
Thanks,
John

Thanks.
I sent the username and PW to you and Chris.
Cheers,
John

Recording sound from DVD and CD play

I just bought a Zen V Plus. Could someone please tell me how to record sound from a DVD and/or CD to my MP3? Thank you!

Try this:
1. Connect the Line IN jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied line-in cable.
2. Press the Back/Options .You may need to do this more than once until the main menu appears.
3. Select Extra button to start a line-in encoding.
5. On your external stereo source, start playing the song you want to encode.
6. While encoding, you can press and hold the Back/Options button and select one of the following items:
Pauses the encoding. You can also pause the encoding by pressing the Play/Pause button.
Stops and saves the encoding. You can also stop the encoding by pressing the Record
Split Ends and saves current recording session, and begins a new one.
7. Press the Record button to end the line-in recording. The recorded track is named LINE followed by the date and time of the recordin YYYY-MM-DD HH:MM:SS<. For example, if you record a track on March 5, 2004 at 2:57 pm, the track is named LINE
This information can also be found in your user's guide, it's a .chm file found in your installation cd.

Record sound from microphone with flash player lower than 10

Similar Messages

Maybe you are looking for