Recorder Error Message when capturing from camcorder

How do I overcome the Recorder Message "Date/Time recorded not found on tape and is required for scene detection". The tape concerned does have the date & time the clips were recorded shown on the camcorder screen when viewing tape playback. I have successfully downloaded the clips from the camcorder onto Windows Movie Maker. The camcorder is a new Panasonic NV-GS330 and the instructions for it advise that clips are downloaded onto a PC via a USB 2 terminal and to use the enclosed USB cable. I have complied with this. Note I can successfully download photographs into photoshop from my digital camera using the same USB. My PC uses XP home Edition with SP3, 512Mb Ram.

I am having the same error message, however the circumstances are different.
I have a Panasonic PV-GS400. One of the reasons I bought this DV camera is it's ability to be used as a digital "pass-thru" recording device for analog content from a vcr/analog camcorder, ect.
This way, I can use that function to directly record analog tape right to the PC rather than having to copy it to the DV camcorder first then copying to the PC.
Here is the catch... Everything is working fine as far as both camcorder settings being correct, all cables correct and when I playback the analog camcorders content, it indeed is being passed thru the DV camcorder AND IS BEING PLAYED PROPERLY IN THE ADOBE CAPTURE WINDOW. Audio and all.
But I CANNOT press the get video (record button). When I do, it wants to record the tape in the DV camcorder, so I removed the tape. But it still wont allow me to record what is being displayed in the capture window, even though it is playing (previewing) BEAUTIFULLY!!
I just need to be able to record what is playing in the window!

Similar Messages

  • Error message when copying from Acrobat Reader

    Error message when copying from Acrobat Reader - any file,  any time (Win 7, Adobe many versions until recent).
    Copy works, but causes a needless and useless error message that has to be clicked away every time.
    This problem is published on the web for a million times without a working solution. And even in the Adobe forum no qualified answer (http://forums.adobe.com/thread/441370)
    When can I expect a solution?

    "101 Views     0 Replies  
    Was this helpful?" 
    Of course not.
    But thank you anyway, I talked to my admin and we changed the whole company to Foxit.
    It can be that easy.

  • Error message when changing from portrait to landscape when printing

    I receive an error message when changing from portrait to landscape when trying to print.  How do I resolve this issue?

    Hi hillclimbing,
    Can you please let me know the exact error message you see as that would be helpful.
    Does this occur with all the pdf files.
    What OS and Acrobat version are you using?
    Regards,
    Rave

  • Error message when publishing from Captivate 4 to MS Word 2003

    Is anyone else getting an error message when publishing from Captivate 4 to MS Word 2003?  I tried all 4 types and still get the following:
    "An error was encountered while publishing to Word.  Verify the following and try again.  Word is installed on your system.  Word is not busy."
    Word is installed on my system and was not in use, so I am not sure why the error.  Any thoughts?
    Thanks in advance!

    Hi there
    I use Captivate 4 and it publishes to Word 2003 without issues.
    Perhaps it has to do with the way your Word 2003 has been installed? Either that or it's a "rights" issue to be addressed by your IT propellerheads?
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Get an error message when importing from iPhoto says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space."

    I get an error message when importing from iPhoto that says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space." the drive is empty, I just reformatted it to Mac OSX journaled.

    I'm guessing this is an extrenal drive, correct? If so make sure the library you're importimng into is really located on the external drive. By default Aperture creates its library in your home pictures folder.

  • Canon HF G10 Camcorder - "Cannot Record" error message when trying to make new recordings

    Hi All, 
    I purchased Canon HF G10 camcorder 6 months ago and suddenly I am getting a "Cannot Record" error message each time I press the record button - it simply stopped working and I am puzzled about this - has anyone else faced this problem? if yes, were you able to resolve it? Any insights or torubleshooting guidance will be greatly appreciated. 
    Best regards,
    Rajiv Arora. 

    ra33,
    I am very glad to help you with this. 
    According to the specifications in the user manual, this model records to the internal memory by default in any shooting mode.  You can manually select to record to the SD cards, but only in the Manual or Cinema modes.  If you are shooting in Auto, clearing out some of the internal memory should stop the "Cannot Record" message from appearing.
    If there is anything else I can help you with, please let me know.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Error message when downloading from Google Play Store

    After recently doing the toshiba system update for my AT300-32gb tablet I now get the following error message when downloading free apps from Google Play Store -Error processing purchase {DF-BPA-13].
    Automatic update for downloaded apps no longer works either. Anyone have a solution to this? 

    Go into your settings and touch "apps" on the left. Then touch "Google Play services" and tap "Clear data" and "Clear cache." Then touch "Apps" again on the left. Now do the same for the "Google Play Store" entry. Then hold down the power button until it asks if you want to turn it off. Go ahead and turn off the tablet. Then turn it back on and try again.
    - Peter

  • I get a Pre-execute error message when importing from Excel using the wizard.

    Hello, I get the following pre execute error message(see below) when I try to import a table from Excel when using the wizard. I wrote my own code in the edit window. i noticed after writing it that the data types did not appear changed in the mappings window.
    Can anyone explain what these errors mean and how they can be solved. Thank you.
    Operation stopped...
    - Initializing Data Flow Task (Success)
    - Initializing Connections (Success)
    - Setting SQL Command (Success)
    - Setting Source Connection (Success)
    - Setting Destination Connection (Success)
    - Validating (Success)
    Messages
    * Warning 0x80049304: Data Flow Task 1: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available.  To resolve, run this package as an administrator,
    or on the system's console.
    (SQL Server Import and Export Wizard)
    - Prepare for Execute (Success)
    - Pre-execute (Error)
    Messages
    * Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Unspecified error".
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "The metadata could not be determined because every code path results in
    an error; see previous errors for some of these.".
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  Description: "Invalid object name 'dbo.PriceTable$'.".
    (SQL Server Import and Export Wizard)
    * Error 0xc0202040: Data Flow Task 1: Failed to open a fastload rowset for "[dbo].[PriceTable$]". Check that the object exists in the database.
    (SQL Server Import and Export Wizard)
    * Error 0xc004701a: Data Flow Task 1: Destination - PriceTable$ failed the pre-execute phase and returned error code 0xC0202040.
    (SQL Server Import and Export Wizard)
    * Information 0x4004300b: Data Flow Task 1: "Destination - PriceTable$" wrote 0 rows.
    (SQL Server Import and Export Wizard)
    - Executing (Success)
    - Copying to [dbo].[PriceTable$] (Stopped)
    - Post-execute (Stopped)
    frustrationmultiplied

    Hello,
    Are you willing to try other ways to do the same?
    http://www.excel-sql-server.com/excel-import-to-sql-server-using-linked-servers.htm
    http://support.microsoft.com/kb/321686 (Distributed queries)
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Idoc with error message when coming from middleware but not in we19

    Hi Experts
    I am facing a very strange issue !
    I have a  Z - Idoc type and corresponding inbound function module for creating schedule lines i.e. doing something what me38 does.
    When my middleware i.e. Mercator Websphere is sending the idocs, they fail with the error message in the status record as
    Field EKET-MENGE (19) does not exist in the screen SAPMM06E 1117.
    But when I try processing the same idoc using we19, the scheduling lines are created and the schedule agreement is changed.
    Is there any difference between we19 and when idocs come from the middleware ?
    Points would be rewareded if useful answers received.
    Regards
    Shubhankar

    Well i think that the problem is with your BDC. there is an option to use standard size in BDC. I think your table control falls short of 19 rows in your program. Please see the thread below and incorporate the same changes in your BDC. I think u might need to record the BDC again.
    Re: BDC tabel control for QE01
    DATA OPT TYPE CTU_PARAMS.
    OPT-DEFSIZE = 'X'.
    CALL TRANSACTION 'FB01' USING ITAB OPTIONS FROM OPT.

  • Error message when capturing......

    A very recent problem: during my last two capturing attempts the error message "dropped frames were detected during your last capturing attempt" has appeared. The tape then stops and the capture vanishes.
    This is very strange and has not happened previously. i have also noticed that the tape itself 'stops and starts' as a cd would if it was scratched... however when i play the tape back just on the dv cam there is no problem at all...
    Does anyone have an explanation? I have no clue and need to capture these tapes
    Thanks,
    Ed

    Timecode is like a heart beat when capturing. A nice steady rythym is required for best results. If a few beats are messed up you know about it.
    A Reset Timecode break is where you hit the record button on your camera to a part of the tape (past the last recorded TC) that has no continuous timecode on it. The camera thinks it's a new tape and the TC reads 00:00:00:00 and starts counting. If this happens you have two sets of identical numbers. That's going to make things confusing unless there is a workaround.
    Another type of break is called an Ordered break.
    This is where two numbers are duplicated, it's hard to find manually.
    How does it occur. It can happen if you review a tape and even though there is continuous code for the camera to Jam Sync and start reading it goofs up a bit and two numbers are the same, eg. 00:01:12:13 and 00:01:12:13 DV is prone to this sometimes but not always.
    FCE is really looking for 1, 2, 3, and so on, no breaks or duplications.
    Hope this was not confusing.
    Al

  • How to avoid 'duplicate data record' error message when loading master data

    Dear Experts
    We have a custom extractor on table CSKS called ZCOSTCENTER_ATTR. The settings of this datasource are the same as the settings of 0COSTCENTER_ATTR. The problem is that when loading to BW it seems that validity (DATEFROM and DATETO) is not taken into account. If there is a cost center with several entries having different validity, I get this duplicate data record error. There is no error when loading 0COSTCENTER_ATTR.
    Enhancing 0COSTCENTER_ATTR to have one datasource instead of two is not an option.
    I know that you can set ignore duplicates in the infopackage, but that is not a nice solution. 0COSTCENTER_ATTR can run without this!
    Is there a trick you know to tell the system that the date fields are also part of the key??
    Thank you for your help
    Peter

    Alessandro - ZCOSTCENTER_ATTR is loading 0COSTCENTER, just like 0COSTCENTER_ATTR.
    Siggi - I don't have the error message described in the note.
    "There are duplicates of the data record 2 & with the key 'NO010000122077 &' for characteristic 0COSTCENTER &."
    In PSA the records are marked red with the same message (MSG no 191).
    As you see the key does not contain the date when the record is valid. How do I add it? How is it working for 0COSTCENTER_ATTR with the same records? Is it done on the R/3 or on the BW side?
    Thanks
    Peter

  • Error message when Sync from itunes.

    I have 2 TVs, both have the latest update, iTunes 8, using AE for WIFI and both streaming. Both units have been working great for over a year now.
    One of the unit is now freezing up after about 1hr of use... I get this error message from iTunes when trying to Sync the unit:
    "The AppleTV is not responding.
    Check that any firewall software running on this computer has been set to allow communication on port 3689."
    Never got this message before, trying to figure out where could I find the setting for any firewall software.???
    I reset my WIFI network (WEP)
    I did a soft and hard reset of the TV.
    Don't know what to do any more.... Might be the unit going bad but I wanted to see if anyone had any suggestion.
    Here is my setup:
    iTunes 8
    AE for WIFI
    latest update on TV
    Sys Pref> Security>firewall> allow all incoming connections
    PowermacG5, 10.5.5
    Streaming from the G5
    Thanks.
    F

    Well, just talked to Applecare and they are sending a replacement unit. Looks like after over one hr of troubleshoot it is an hardware problem.
    F

  • Final Cut Express:  No audio when capturing from camcorder

    When capturing video from my "Sony TRV 18" digital camcorder and a Canon ZR500 digital camcorder
    into Final Cut Express 4.0.1 via fire wire to my scratch disk - a LaCie external hard drive -
    I get the video in my browser but it has no accompanying audio.
    When I move a captured clip from the browser to the viewer and time line, the video shows up, but (1) there is no accompanying audio shown in the audio time line, (2) no audio can be heard and (3) the audio meters show no action.
    My Easy Setup settings for audio match my camera audio settings.
    I've used different firewires between the camera and the scratch disk. Still the same.
    This has been a problem for about a month. Everything worked fine before. To make project deadlines, I have worked around this anomaly by capturing clips in IMovie 4 on my older Mac laptop than transferring the media clips to my Final Cut Express scratch disk. That works, but it is time consuming and requires rendering of all the audio.
    I use an IMac with OSX 10.6.5 with 266 GHz intel Core i5.
    Thank you in advance for any tips that could help.

    Hi Sid
    I get the video in my browser but it has no accompanying audio.
    YES - This is the way FinalCut Express AND Pro works !
    If You need the audio - Then You connect a small set of speakers to Your miniDV Camera
    (headphone out)
    alt. if no phono-out on Camera is to connect a small TV to the Camera analog way
    and here You can both see and hear during Capture
    (BTW - Connecting a small TV (or if §§§§§ is no problem a reference monitor
    §5-10,000 or even more) is a Very good way of keeping Quality control during
    editing process. Eg Transitions, audio levels, color fidelity etc. I do and the
    ref monitor are well compared to my final DVDs.)
    There are NO WAY that You can monitor audio during Capture in any FinalCut versions !
    Yours (been there and done that - or as said in Sweden "butted Your head at it") Bengt W

  • Error messages when exporting,from pdf to word or excel

    i am trying to export a bank statement from pdf to excel after scanning.
    the error message i get is ;damaged document,or internal error.
    what do these messages mean,and how do i fix the problem?
                                    thanks

    Good day,
    Are you getting this error when you're trying to open the scanned document in Adobe Reader? 
    If so, does the file have a .pdf extension on it? 
    -David

  • Time Capsule error message when away from home network

    I have a Time Capsule on my home network.  When I am home, my MacBook backs up to it with Time Machine perfectly.  However, when I am at work or away from home, I continually (every hour or so) get an error message stating the following:
    The was a problem connecting to the server "OurTimeCapsule.local".
    The server may not exist or it is unavailable at this time.  Check the server name or IP address, check your network connection, and then try again.
    The problem isn't that I don't understand this error. I know perfectly well that my Time Capsule isn't available on my work network, and I don't expect it to be. Prior to installing Lion I never saw this error, and with every update I hope it will be fixed, but I still see it with 10.7.2.  Obviously Apple knows that people using Time Capsules to back up their laptops will not always be on the network that contains the Time Capsule - they even made changes in Lion to save backups to a local disk in times when the Time Machine disk isn't available.
    What I want to do is supress the error somehow - it is a modal dialog that sits on top of whatever I'm doing and is extremely disruptive, especially when giving a presentation.  Anyone know how to stop this error?

    As a temporary workaround, of course, you can just turn Time Machine OFF.
    There was a similar message, with reference to type "file" in the URL, but this one is differnent.
    Have you ever used a 3rd-party utility, or followed any instructions to edit some files, to change Time Machine's default behavior?

Maybe you are looking for