Recording in Connect dont play all streems after editing

Hi
Have a problmen from yesterday 26 march.
I usually record my webinars and it always work. I also always edit the ends on the meeting. However yeastrday I had two webinars and after editing they lost the video ans audio från the other lecturers. If I revert to original it dont come back. What is this and what can be done about it. My audience is waiting for the recording so I have to give some information.
here is a link to one of them http://connectpro47604106.adobeconnect.com/p96rukzh4f6/
and here is to the other http://connectpro47604106.adobeconnect.com/p71uq5hfnz8/
Regards
Bengt

You should reach out to support: http://helpx.adobe.com/adobe-connect/connect-support.html

Similar Messages

Can Iphone 4 be hacked? Paused recorded video began to play another video after 30 minutes on pause

I recorded a video using my iphone camera today and had begun to replay it. I had paused the video to work on my computer and after about 30 minutes I noticed another picture I had taken today was now on the screen and a few minutes later, another video began to play that was recorded several months ago!? Can someone hack into my phone? WiFi was turned off.

I have the same EXACT problem. it won't play some of my videos, any youtube videos (says it cannot connect to server) and won't play a lot of other internet videos

Playlist not playing all videos after update

I updated to 5.1, and my video playlists are no longer working correctly. It will play the first video, then stop and the screen saver will turn on. If I try to restart the video, I get the spinning circle that never goes away. If I close iTunes and re-open it, I can start the video again, but it will again stop after the first one. Everything was working fine until the last update to 5.1.
Any idea how I can either fix this, or go back to before the last update?
Thanks in advance!

OK, so the second macs library is visible from the tv, you can navigate the videos in that library but when you try to play a video it won't. I'm still not clear whether this is all videos or just some, but meantime try this.
From itunes select a troublesome video, choose file/show in finder and note the location of the original file.
From itunes (not the finder) delete the file and choose keep files when prompted.
Drag the original file from the finder back into itunes.
Does this help.

Mov files dont play smoothly even after rendering work area

HI, I have adobe premiere elements 8 and i have some mov files that were recorded on a canon camera and are around 4 gb per 12 minutes of footage. Ive exported them into premiere to edit and to export out.
I have rendered the work area of an 1 hour of footage in total which took 6 hours and then crashed. It is blurry and and jittery and so i can't edit the footage. I tried to export it and as h264 and reduced the bite rate to 7 and it hadn't even got to 1 percentage after 2 hours. I'm really not sure how to edit this or export it without loosing quality. Can anyone point me in the right direction?
thanks

When you create a new project and import the video, does it have a red line over the timeline?
If yes, your project and video do not match... and it MAY be that whatever is inside that MOV wrapper is not really compatible with version 8
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainspector.massanti.com/

Quicktime movies dont play all the way

I am not sure if anyone else is having this problem, but when i stream a quicktime video it seems as though the whole video does not play. It appears the playing of the video speeds up and cuts off at the end but this is not the end of the video. Hope this explaination is good enough. Can anyone help? Thanks

I think this started since QT 7.0.3 came out if im not mistaken. I may go back to 7.0.2. Not sure if this will fix the problem and maybe cause another problem with itunes 6. Anyone have any info on this. thanks

I downloaded 4 new songs but they dont play all the way through

I tried coverting them to an AAC version but for everyone of them it says there has been an error. Even when I delete them, then re download them, then try again, it still doesn't work! How do you fix that?

Did you delete and redownload then from Apple by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My songs I added from CD's I had have been shaded out and have a red circle with a dot by them - why cant they play all the sudden?? Anyone Please..

Please help me understand why my songs dont play all the sudden - seems like the ones I bought from i tunes are fine and a few ones I uploaded but the others are errored out

Please help me understand why my songs dont play all the sudden - seems like the ones I bought from i tunes are fine and a few ones I uploaded but the others are errored out

QT movies dont play entire clip

I didnt get any response in the Safari forum so I thought I would try this one. Has anyone else had this problem? Please see the link below. Thanks
Jeremy Varner, "Quicktime movies dont play all the way" #1, 05:28pm Oct 19, 2005 CDT

When I try to play a mpg clip, it plays about 5 seconds and stops. What am I doing wrong?
The file may have breaks in the timecode. Try playing the file in MEPEG Streamclip. If it loads/plays, try "Command-F" to "fix" the breaks. You can then use the "Save as..." option to save the file or one of the export options to save the file in a "fully" compatible QT compression format.

My iMovie voice recording is suddenly not working. As I record, it shows the green bars; however, when I play the recording it does not play my voice over at all nor show the green bars. I was mid-way through my project when this problem occured.

As I record, it shows the green bars; however, when I play the recording it does not play my voice over at all nor show the green bars. I was mid-way through my project when this problem occured. HELP!!!!

As far as I can see, it's random. Everything. Nothing makes any sense!
A the moment, the iPhone is playing music with the SIM card, but without anything plugged into it, but it's occasionally fading in and out.
Oh, and I doubt this is related, but about two months ago the iPhone failed to show that the battery was draining - it was stuck at 100%. This went on for a few days, it wouldn't even warn me at the 20% mark, it would just shut off. This happened for at least three full charges - I remember at one point it suddenly started working again at about the 70% mark, I'm not sure if it was alright after that or if it went glitchy on the next charge... but in any case, the problem mysteriously never reappeared after those few days.
Message was edited by: Shiranai

In scene selection mode, can you make iDVD return to the scene selection menu after playing that scene without continuing to play all the other scenes?

After selecting one scene from the scene selection menu, the following scenes play automatically, as if it were in "play movie" mode. Is there a way to stop that behavior and have the DVD return to the scene selection menu after playing just the selected scene?

OK
So what You want is a "Play All" button resp. a "Play one Chapter at a time" one.
Then
BAD News - There are Non ! in iDVD
GOOD News - it can in part be faked.
read on
Play all resp. one chapter at a time
Play All Button
1. There are NO - Play All - button in any version of iDVD
2. It can be faked in several ways
• Easiest and most fault proof way is to make a doublet movie containing All and with
Chapters set to match. It will take up x2 space but is easy to understand and produce.
Cons: Tried this in iMovie’11 by Exporting out each part as a full Quality QT.mov then Importing back into new events and putting these into a new project (Play All project). Resulting DVD had Audio that was OK (as parts) - BUT the picture was very bad and standing photo were cut of in height. So the Play All movie has to be created from same material and exactly in the same way as the individual parts + then Chapters has to be set to match.
• It's said that one can put all movies into a Photo/SlideShow and this will also
give the function of a Play All button - Tested - and ONE HAS TO un-cheque - Scale pictures to TV-Safe area else it will be a black frame all around and a small picture !
Mike Evangelist1
You might be able to get close to what you want by using a slideshow in iDVD. (It's not widely known, but you can put videos in a slideshow.) If you set the slide duration to manual, playback will pause after each movie/slide, and you can continue with the 'next' button.
3. Using another program to do this e.g.. Roxio Toast™ where there is a Play All button option.
Summary
a. Making a Play All movie with same care as the individual Part movies - gives a very Good Result
b. Using Roxio Toast™ - also an usable way to go
Yours Bengt W

HT204368 After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth plantronics model M25. I tried reset all settings after turning on and off also submitted diagnostic. Do I have to buy yet another bluetooth set?

After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth, plantronics model M25. I tried reset all settings after turning on and off also submitted diagnostic. Do I have to buy yet another bluetooth set?

Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
DRM audio is not effected as this is handled by the native iOS music app.
As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

Speakerphone problem - lost voice from speakerphone while playing music or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes

or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes.
iphone 4
SOLVED plugin to charger solved it - so problem was with contacts -- no idea why - phone is new - no water - no havy dust - usual using
hope will never return. Thanks

We checked it with an iPhone 5 in house multiple times and could not reproduce this Problem. Must be something specific to your device. Maybe your speakerphone volume is turned down completely?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Camileo S20 - How to play all recorded videos?

hi all!
Ive not long had the camileo s20, so still trying to get mt head around it. I think ive managed the basics but im having a problem with play back.
When i recored a video - 6 mins long, but i pause the recording half way through, then go back on to start recording where i left off, during play back it will play the movie sepratlely and i manualy have to start the other half of the video to play.
Is there anyway i can just click play and it plays all my recorded videos continuously? a play all setting?
Thanks

Hi wayne_1,
First of all I can recommend checking the user manual. It contains a lot of informations about your camera and how to use all features.
I have checked the user manual but unfortunately I think such a playback function isnt available. With the playback button you can switch to playback mode and use the left and right button to go to the next picture/movie.
But there is no function about playback of all videos.

How do I get iTunes U to play all files, right now it stops after each audio file and I will have to manually select the next one.

I am unable to find a way to get iTunes U to play all audio files one after the other without me manually playing each one of them.

Best I've managed is to create a smart playlist in iTunes with the album set to the title of the course. Have the smart playlist update automatically so that any new postings from the course are included within the playlist. After that you should be able to play the playlist and have all the audio files play one after the other. Hope it helps!

Recording in Connect dont play all streems after editing

Similar Messages

Maybe you are looking for