Recording problem for f-04 transation
Hi,
Iam using f-04 for uploading records from FBL3N. suppose if i have 3 records in database , recording is not going to second record, i have enter manually save button to go to second record (Mode 'A'), if i try with mode 'N), iam not getting output.
PERFORM bdc_dynpro USING 'SAPMF05A' '0122'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BKPF-BUDAT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SL'.
PERFORM bdc_field USING 'BKPF-BLDAT'
l_dat1.
PERFORM bdc_field USING 'BKPF-BLART'
it_bsis-blart .
PERFORM bdc_field USING 'BKPF-BUKRS'
p_bukrs.
PERFORM bdc_field USING 'BKPF-BUDAT'
l_dat2.
PERFORM bdc_field USING 'BKPF-MONAT'
it_bsis-monat.
PERFORM bdc_field USING 'BKPF-WAERS'
it_bsis-waers.
PERFORM bdc_field USING 'FS006-DOCID'
PERFORM bdc_dynpro USING 'SAPMF05A' '0710'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF05A-XPOS1(03)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=PA'.
PERFORM bdc_field USING 'RF05A-AGBUK'
p_bukrs.
PERFORM bdc_field USING 'RF05A-AGKON'
p_hkont.
PERFORM bdc_field USING 'RF05A-AGKOA'
'S'.
PERFORM bdc_field USING 'RF05A-XNOPS'
'X'.
PERFORM bdc_field USING 'RF05A-XPOS1(01)'
PERFORM bdc_field USING 'RF05A-XPOS1(03)'
'X'.
PERFORM bdc_dynpro USING 'SAPMF05A' '0731'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF05A-SEL01(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=PA'.
PERFORM bdc_field USING 'RF05A-SEL01(01)'
it_bsis-belnr.
PERFORM bdc_dynpro USING 'SAPDF05X' '3100'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=AB'.
PERFORM bdc_field USING 'BDC_SUBSCR'
'SAPDF05X'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF05A-ABPOS'.
PERFORM bdc_field USING 'RF05A-ABPOS'
'1'.
PERFORM bdc_dynpro USING 'SAPMF05A' '0700'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF05A-NEWKO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF05A-NEWBS'
'50'.
PERFORM bdc_field USING 'RF05A-NEWKO'
'101047'.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BSEG-WRBTR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BSEG-WRBTR'
v_amt.
PERFORM bdc_field USING 'BSEG-VALUT'
l_dat3.
PERFORM bdc_field USING 'BDC_SUBSCR'
'SAPLKACB'.
PERFORM bdc_field USING 'DKACB-FMORE'
'X'.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-ANLN1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'BDC_SUBSCR'
'SAPLKACB'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ANy one help me to go to second record with out user interaction.
thanks,
Veeru
HI Veeru,
Problem may be in file structure and which method u r using for uplaod the data?
Regards,
Kumar.
Similar Messages
-
PO13 Recording problem for BDC
Hi All.
We have a requirement for PO13 bdc for changing the cost center data per position wise.
I am trying to change the cost center from PO13.while doing manually, the new cost center is delimimting the older record & appending a new record in PO13 & as well as in PA30(Org Data).it is working fine.
same thing I did in recording by SHDB for PO13.In this time it is overwriting the existing costcenter record & is not reflecting in the PA30 also.
while doing manually , while saving the Popup"Previous record will be delimited at end.Do you want to save" (Program-SAPLSPO1)is comming.But same popup screen is not comming in SHDB recording.
that's why even I ran the bdc , records are not comming properly.
appart from this PO13 bdc, is there any other method of changing the Cost center (like bapi / function module) in mass.
it is very urgently needed.Plaese help me to sort out this issue.
Thanks in advance,
Regards,
VenkatHi Venkat,
You'd better try PP02 transaction for BDC recording when Organizational Management Objects are in question.
Regards,
Dilek -
Recording Problem for Vendor Return
I need to update the Vendor Return indicator (LFM1_ZKRET) on the XK02 Vendor Change screen. However, when I select this field while doing a recording using SHDB or LSMW I receive the error "It is not possible to copy data from fields 'Returns with shipping proc'. I'm fairly new to SAP so I'm not sure how to update this field without doing a recording. Any advice would be greatly appreciated. Thanks!
It is not possible to record return vendors(Sap Standard functionality).You can only check the indicator.But if u want to create a return vendor(customer) you ned to create a customer and u need to assign it to th evendor.
There is a specific procedure(simple).
Thanks,
Venkat Chaitanya -
Recording problem on my Xi-Fi Fatality?
'Recording problem on my Xi-Fi Fatality?d So I have a Xi-Fi Fatality, and I would like to be able to record directly from my computer so that it's own output is also the input. For example, if I'm on ventrillo or something and I want to play a funny mp3 to show my friends I'd like to be able for the audio to come directly from the output.
Anyways, my microphone seems to work fine, and that's where the trouble begins.
I go to the sound control panel and click on the recording tab. ? It has microphone as the default device and it says "working."
There are also options for "Auxillary" "Line-In" "Digital-In" and "What U Hear"
However, under each of them it says "currently unavailable"
I am unable to get any of them to function even when I set them to the default device.
Is this normal?+ It's funny you should post this because I came here right now to post the exact same thing. I would have posted earlier but I forgot my account information and had to wait to get a reply email.
So... same here (yes I know this was no help).
Actually this is kind of weird. Every now and then my "Aux 2" will become available and my mic is not. I have to restart my computer 4 or 5 times for my mic to become available. -
Payment F110 - No data records found for these selection criteria, FZ208
Hi all,
I have done all configuration for payment medium for a customer in Norway. We use Telapay and program RFFONO_T. We have not activated the new general ledger but we have ECC 6.0 so I do not see why it should not work.
The invoices got paid with payment order but when I should download the file in Environment > Payment medium > DME Administration I got the following error message:
"No data records found for these selection criteria
Message no. FZ208
Diagnosis
No data could be accessed for this selection.
Possible causes are:
No data exists for the activated selection.
You have no authorization to display or edit data from this selection.
Procedure
First check whether your selection criteria are correct. You may need to expand the criteria to include a larger search area to check whether data exists in the system.
Make sure you have the proper authorizations for displaying and editing data. Read the Release note for DME management for further information on the authorization objects.
Proceed"
I have tried with different variants but that doesn´t matter. When I look at the payment run log I can see following:
"Additional parameter specifications 1400 SAPO02 are missing
Message no. FR193
Diagnosis
Entry 1400 $V2& is missing from the additional company code parameter table.
System Response
Processing was terminated.
Procedure
Maintain the entry according to the instructions in the program documentation."
I suppose that´s why I can´t get a file. Do any one of you know why I can´t get the file created. Please help.
Best regards LisaHi Lisa,
I have a similar problem with program RFFONO_T and Telepay format for a Norwegian customer. Payment medium is not created. In the payment run log is the following message: "Additional parameter specifications XXXX SAPO02 are missing
Message no. FR193.Entry XXXX $V2& is missing from the additional company code parameter table."
According the program documentation for RFFONO_T, a company number (11 digits) has to be maintained under company code global data, additional details. The legal org.number with 9 digits is already entered but I do not understand where to enter a 11 digits company number? A user number (10 digits) is also entered in trans OB94 but the problem remains.
Did you find a solution to your problem?
Regards,
Agneta -
QM_LSMW BY RECORDING METHOD FOR QP01
Dear QM Experts,
1. I am doing LSMW by recording method for QP01 transaction code
2. I am facing one problem while recording in inspection characteristic screen
3. While saving another screen opens prompting to put inspection method, plant and version for inspection method.
4. This is not at all needed as per the requirement.
I removed default Plant for Inspection Method version, Version Number of the Inspection Method while recording LSMW in inspection characteristic screen. Still it is happening.
Surprisingly when we create inspection plan though QP01 it never asks for these things.
Any remedies?
Best Regards,
Thanks is advance
Anand RaoDo not use Recording for QP01.
There is a pragram named "RCPTRA01". It can be selected in step1 of lsmw>>Object Type and Import Method>> Standard Batch/Direct Imput>>Object 0240;Method 0000;Program RCPTRA01; Program Type B.
Then Step 2, define source structure. In fact you may go to step 4 to have a look at the structure of the target structure. It would be easy to copy that. The source structure would be as below, ZBI001 would be the top level and the others the same lever under ZBI001:
Source Structures
ZBI001 Transaction Header Record for Data Transfer of Routings
ZBIMPL Batch Input Structure for Allocation of Mat. to Task Lists
ZBIPKO Batch Input Structure for Task List Header
ZBIPPO Batch input structure for task list operation
ZBIPMK Inspection characteristics for batch input of task lists
In step 3, define source fields for source structure. For easy define, you may click "Object Overview">> Table to get the possible fields of the related structure, and then copy to Excel; after that, you may copy the fields directly from Excel to fields difining window in step 3.
Step 4, assign the source structures to target structures, the target structures are named the same as the source structures above, just without the letter "Z". For example, assign ZBIMPL to BIMPL, ZBIPKO to BIPKO, except ZBI001 is assigned to BI000 and BI001 as well.
Then Step 5, you may find there are RECTY and default settings are "00" "99" "01" "03" "09" "18" for BI000, BI001, BIMPL, BIPKO, BIPPO and BIPMK. Let alone "99" and imput these value to field "RECTY" in corresponding source structure fields
Then you may run auto field mapping in step 5, and make some values constant, like PLNTY=Q etc.
Then a problem with the profile under field "PROFIDNET". Run TCODE 'SPRO' to IMG>Quality Management>Quality Planning>Inspection Planning>General>Maintain Profiles for Default Values>Profile: default values plan/general. You may find there is a box named "Entry tool", tick that box, if not it is not possible to run QP01 in lsmw. And at the same time you may find the profile is 0000001. Key the value to field "PROFIDNET" and make the rule as constant.
For step 6 there is nothing to do
in Step 7, unlike other objects, you can use just one .txt file for uploading the inspection plan. When specy file, select "Data for Multiple Source Structures(Seq.file); Delimiter: Tabulator; File structure: Field order Matches source structure definition(as in Seq.file) I find not possible to put field names at start of file, so "Field Order Matching" is very important
Then how to prepare the file? We can accomplish this with 5 excel sheets
the fields orders for my customer is like this:
1)for RECTY 18(Inspection Charatristics):
MATNR RECTY MERKNR KURZTEXT VERWMERKM QPMK_ZAEH PMETHODE QMTB_WERKS STICHPRVER PROBEMGEH STELLEN MASSEINHSW SOLLWERT TOLERANZOB TOLERANZUN
2)for RECTY 09(Operation):
MATNR RECTY VORNR STEUS WERKS LTXA1 UMREZ UMREN
3)for RECTY 03(Header):
MATNR RECTY DATUV VERWE WERKS STATU PLNME LOSVN LOSBS VAGRP KTEXT
4)for RECTY 01(Allocation of Material)
MATNR RECTY MATNR WERKS LIFNR KUNR
5)for RECTY 00(Transaction Header)
MATNR RECTY TCODE START
Creat a new blank sheet and copy the fild contents of these 5 sheets into it, then you can sort the fields in A to Z order with Column A(MATNR), B(RECTY), and C(MERKNR), then the seq.file to be uploaded is completed.
for example:
10001042 00 QP01 20090119
10001042 01 10001042 1200
10001042 03 20090119 5 1200 4 PC 0 99999999 Screw\M16x45\GB/T5783
10001042 09 0010 QM01 1200 inspection 1 1
10001042 18 10 inspection on material C101 1200 JF035 1200 GUD5 PC
10001042 18 20 Inspection on size C102 1200 JF034 1200 GUD5 PC
Then copy start from Column B, i.e., without the material numbers in Column A, to .txt file.
Specy the file in Step 7 in lsmw.
the step 8, assign this .txt file to all structures
then step 9, 10, 11, 12, 13 Creast Session and run it in at the end.
Actually this program is not possible for QP02. If you want to make some correction on the inspection plans in SAP, you'd better delete them and upload the revised one.
This program is very similar to CA01 Production Routing and thus also applicable to CA01. But I recommend using Object 0170;Method 0002;Program RCPTRA02; Program Type D for CA01, because it provides testing transfer at the end so that you can check out logical errors, and much fastee. Pity that for QP01 there is no such program
Currenty I am acting as Data cunsultant for an Elevator Manufaturer in China, hope my experience would help for you. My MSN is zhangxiaojun at msn dot com -
How to update Record Model for old Records(Personnel Record) in DPF?
Hi
i was able to successfully implement Digital Personnel files and Record Management for my scenario, but now question is:
i have created a record for personnel using "SE38--> Report (RPASRCREATEDPF)" or "Tx RPASRCREATEDPF) after a while i decided to add a node to my record model , how can i update my personnel records to new record model?
i need to do it for several staff and this is not logical to change record for every individual staff. Also when i deleted a record and recreated it all of old Archived and Processed Document gone.
Any Idea?
Regards,
Ali.Hi Pragya
Thank you for your very helpful answer, i tried that report and it has changed my records but problem is, i am using SAP sample record model , i have changed some Nodes Name and it seem name change has not taken effect in my records, those nodes that i added to my record model is correctly transferred, but some changes has not affected my personnel records.
Green: Change Affected
Red: Not Changed
Regards, -
Hi ,
Can you please explain me about Recording Routine for Tables..
I came to know that we can get do it via SE55 tcode..
Can you please explain me the process to do this..
Regards
Parnith..Hi Raj,
Thanks for your solution..
Can please suggest how can i solve following requirement..
I had to update the Recording Routine for one my custom tables from 'Standard recording routine' to 'No,or user,recording routine'.
I need to update and transport this..
When i went via SE55..
There are four Radio button..
Can you please let me know the exact steps to solve the above problem..
Regards, -
Hello all,
(If this is not the right place to post my question, please let me know.)
I have been making music CDs without any problem for quite a long time using Audacity, a digital audio editor to export mp3 or any other audio file format as AIFF files, which can be read on a CD player, and Toast 6 Titanium for burning to a CD.
For no apparent reasons, the last 6 CDs I've burned cannot be played on a CD player; either one player would eject the CD after a while or, a different player would show there is no disc in the tray.
My first reaction was to bring the iMac to Tekserve where a new optical drive had been installed last month to replace the original which was not working any longer. I explained the problem to the technician who said it may be due to the media I've used. It sounds strange that the problem lies with the media as I've using the same brand (TDK CD-R80) on all recordings I've made successfully up to this point in time.
The technician asked me to make a recording on a blank CD at the shop. I did it using the same burning software on my iMac. This recording was played on a CD deck without any problem.
Apparently, this proved there was nothing wrong with either the optical drive or the software, so I came back home with my iMac in the same condition as it was when I brought it for servicing.
I have Toast preferences set to leave open all CDs, so I tried recording a second session on the same CD used for recording at the shop. This second session recording was not playable on my CD deck nor on a different one.
I then took one of the blank CDs the technician gave me (memorex CD-R 700 MB) and made a new recording. This one played right on a CD deck. So, the problem seems to be the media used although quite many CDs of the same brand previously recorded are all playable on a CD deck.
I wonder whether:
1- recording music on a standard CD-R does not always render a CD playable on a CD deck; and
2- additional music sessions recorded on a previously recorded but open CD does not reproduce on a CD deck.
Thank you.>2- additional music sessions recorded on a previously recorded but open CD does not reproduce on a CD deck.
This is not a surprise. Not all reader devices support multiple sessions. I think the number is getting less over time. I'd advise against recording any audio cd with multiple sessions. The format on the cd for multiple sessions is different than the standard audio cd.
Robert -
Sql query - Selecting last recorded values for each date in specified period
Hello,
Can someone please help me with my problem.
I'm trying to get last recorded balance for each day for specific box (1 or 2) in specified period of days from ms access database using ADOTool.
I'm trying to get that information with SQL query but so far unsuccessfully...
My table looks like this:
Table name: TestTable
Date Time Location Box Balance
20.10.2014. 06:00:00 1 1 345
20.10.2014. 12:00:00 1 1 7356
20.10.2014. 18:45:00 1 1 5678
20.10.2014. 23:54:00 1 1 9845
20.10.2014. 06:00:02 1 2 35
20.10.2014. 12:00:04 1 2 756
20.10.2014. 18:45:06 1 2 578
20.10.2014. 23:54:10 1 2 845
21.10.2014. 06:00:00 1 1 34
21.10.2014. 12:05:03 1 1 5789
21.10.2014. 15:00:34 1 1 1237
21.10.2014. 06:00:00 1 2 374
21.10.2014. 12:05:03 1 2 54789
21.10.2014. 15:00:34 1 2 13237
22.10.2014. 06:00:00 1 1 8562
22.10.2014. 10:00:00 1 1 1234
22.10.2014. 17:03:45 1 1 3415
22.10.2014. 22:00:00 1 1 6742
22.10.2014. 06:00:05 1 2 562
22.10.2014. 10:00:16 1 2 123
22.10.2014. 17:03:50 1 2 415
22.10.2014. 22:00:10 1 2 642
23.10.2014. 06:00:00 1 1 9876
23.10.2014. 09:13:00 1 1 223
23.10.2014. 13:50:17 1 1 7768
23.10.2014. 19:47:40 1 1 3456
23.10.2014. 21:30:00 1 1 789
23.10.2014. 23:57:12 1 1 25
23.10.2014. 06:00:07 1 2 976
23.10.2014. 09:13:45 1 2 223
23.10.2014. 13:50:40 1 2 78
23.10.2014. 19:47:55 1 2 346
23.10.2014. 21:30:03 1 2 89
23.10.2014. 23:57:18 1 2 25
24.10.2014. 06:00:55 1 1 346
24.10.2014. 12:30:22 1 1 8329
24.10.2014. 23:50:19 1 1 2225
24.10.2014. 06:01:00 1 2 3546
24.10.2014. 12:30:26 1 2 89
24.10.2014. 23:51:10 1 2 25
Let's say the period is 21.10.2014. - 23.10.2014. and I want to get last recorded balance for box 1. for each day. The result should look like this:
Date Time Location Box Balance
21.10.2014. 15:00:34 1 1 1237
22.10.2014. 22:00:00 1 1 6742
23.10.2014. 23:57:12 1 1 25
So far I've managed to write a query that gives me balance for ONLY ONE date (date with highest time in whole table), but I need balance for EVERY date in specific period.
My incorrect code (didn't manage to implement "BETWEEN" for dates...):
SELECT TestTable.[Date], TestTable.[Time], TestTable.[Location], TestTable.[Box], TestTable.[Balance]
FROM TestTable
WHERE Time=(SELECT MAX(Time)
FROM TestTable
WHERE Location=1 AND Box=1 );
Tnx!
Solved!
Go to Solution.For loop
following query keep day (here 24 in below query) Variable from ( 1 to 28-29/30/31 as per month)
SELECT TOP 1 TestTable.[Date], TestTable.[Time], TestTable.[Location], TestTable.[Box], TestTable.[Balance]
FROM Test Table.
WHERE Time=(SELECT MAX(Time) FROM TestTable WHERE Location=1 AND Box=1 )
AND DATE = "2014-10-24";
PBP (CLAD)
Labview 6.1 - 2014
KUDOS ARE WELCOMED.
If your problem get solved then mark as solution. -
Recording Action for Swatch Pattern creation
Hi !
I'd like to record an action in Illustrator CS6 for adding a swatch pattern but I have a problem for specifying options.
Here is what I do :
Open a document containing (for instance) a rectangle filled with what will become my new swatch pattern.
Go in Window > Actions. Add new action, name it and start record.
Select All
In Action window menu, select "Insert menu Item"
Go to Object > Pattern > Make
This is all fine at that point. The swatch is created and I can find it in the swatches window. The problem is I'd like to record a change in the "Pattern Options" window (changing default Copies from 5x5 to 1x1).
I can't record this last action.
Would anybody have an idea on how to do this ? If it's not possible via actions, is it possible via js scripting ?
Thanks in advance,
JimIntrestingly enough when I record the Action in CC the Action looks like this:
Then I quit Illustrator CC and launch again and the Action no longer works. Here is what the Action looks like in the Actions Panel after quiting Illustrator and launching it again:
The Select All Unused goes away. Curiouser and curiouser. -
Condition record selection for MATNR
Hi Experts,
I'm selecting the Condition Record Number(a505-knumh) for a Material Number like this.,(I want the record number whose validity date should be greater than today's date and whose begin date should be less than today's date.)
<b> select knumh from a505 into i_price-knumh
where kappl = 'V'
and kschl = 'ZR10'
and vkorg = '1000'
and pltyp = '01'
and matnr = itab-matnr
and datbi >= sy-datum
and datab <= sy-datum.</b>
But when I see the table a505, there are 3 records(knumh) for that material number (for eg: MATNR = 100813) like this:
-KAPPL|KSCHL |VKORG |PLTYP|MATNR|DATBI|DATAB |KNUMH|
V |ZR10|1000|01|100813 |11/30/1992|08/01/1989|0000037438|
V |ZR10|1000|01|100813 |04/07/1996|12/01/1992|0000037439|
V |ZR10|1000|01|100813 |12/31/2039|04/08/1996|0000042185|
My problem is: When i'm selecting the record like this, it should display the 3rd record as my value.
but it is showing up the wrong values.
plz tell me what is the wrong with the selection statement.
thnx,
Message was edited by: dev a
Message was edited by: dev aHi Dev,
Are you looping internal table itab?
If you are then each loop the program will overwrite the internal table i_price with the new value. In other word,
you only get the last value from the select statment result.
Please try like the following example instead of looping internal table itab.
SELECT * FROM A306
INTO CORRESPONDING FIELDS OF TABLE T_HEADER_A306
FOR ALL ENTRIES IN ITAB_KSCHL
WHERE KSCHL EQ ITAB_KSCHL-KSCHL AND
KSCHL IN KSCHL AND
VKORG IN P_1 AND
VTWEG IN P_2 AND
PLTYP IN L_1 AND
WAERK IN H_1 AND
MATNR IN L_3 AND
KFRST IN L_2 AND
DATAB >= DATLOW AND
DATAB <= DATHIGH AND
KAPPL = 'V'.
Hope this will help.
Regards,
Ferry Lianto -
hi, I´ve got a serious problem with my N85. When I try to record a video in high-TV-quality(to my microSD card) it starts to lag extremely after about 8 sec., same problem with normal TV-quality after 30 sek..
Another interesting part is that after I stop the recording the video is saving for about 10 sec.!(even if the video is only 1 sec. long)
It works fine if I save videos to internal memory! My 8GB card is original and only 45% filled (so about 3.6GB free)
But now the interesting Part: It worked fine before(with the same SD card), the video didn´t lag and it was saved in about 1 sec. I didn´t add anything to my phone, so what could be the problem??
thanks for your helpI´ve testet the problem for a few weeks now and I noticed something. the video stuttering is gone when I delete older videos(they have to be older than 4 days), after i do that I can record a video up to a length of 10 min(or even longer, if I had time to try) but after 1 video the effect is gone, even if I delete the just recordet video. I also experienced that deleting a good video(non-stuttering) takes a lot less time than to delete a lagging one.
to sapporobaby: it sure is the way date is being written to the card, cause it is working if I record to phone memory, but I didn´t buy a Nseries device to capture videos with only 2 min. length.
Furthermore this problem is not listet in the changelog for the new SW
can anyone help me? -
I am trying to record narration for my slideshow in Keynote 09 version 5.1.1. I put the transitions on automatic and hit the record button, then read the slides as they advanced. The program allows me to record my voice, however, when I play the slideshow back the recording continually becomes more off sync with the slides with each play. Is there a way to fix this?
Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks -
Delta Upload Problem For 0PM_CO1 Cube
Hi Friends,
I got a problem for Delta Upload.In RSA3 data is O.K and In RSA7 also data is O.k.but the problem is with Delta Upload new records are not comming,i did First initialization,thst is o.k,but why Delta Upload is not comming.
please give me help about this .
Thanks in Advance.Hi Praksh,
this is chava,can you send your mobile no. to my mail id.
Mail:[email protected]
Message was edited by: CHAVA CHAVA
Maybe you are looking for
-
Unable to Install JRUN 4 Updater 7 on windows server 2008 64 bit machine
Please help us on the error while installing jrun4, updater 7 on Microsoft Windows Server 2008 R2 Enterprise 64 bit operating system The JVM installed on the machine is 32 bit. I installed jrun on the machine successfully. When I try to add a web ser
-
Yosemite keeps installing (progress bar) after every restart
I've recently installed Yosemite and there are currently no more updates available. However every time I restart or reboot my computer I continue to see an install progress bar as if the OS is finishing up an install. Since this is happening every ti
-
Front Row with Griffin Firewave?
I'm trying to play a DVD in Front Row, using the sound output of my Griffin FireWave. It's currently set as the sound output device in System Preferences, but Front Row plays all its audio through my MacBook Pro's built-in speakers. Is there a settin
-
I want to change security question but the problem is i don't know the rescue email what can i do ? Please answer me quickly
-
Another Overheated MacBook Victim: Swollen Book
I just got my new MacBook a week ago. Yesterday when I was doing some cleaning to the bottom surface of the Mac, I found some scratches on a particular spot (somewhere below the letter D on the keyboard). I was pretty sure that the machine came scrat