Recording Program for SOST Tcode

Hi Experts,
I have a requirement to write program to send fail mails from SOST Tcode.
For that i am planning to write Recording Program (still not clear if it will work, as the where data in SOST is maintained)
However, send me some snipets which can help to achieve this goal.
Any suggestion will be welcome!

Hi,
Find the solution what i opted. Recording will not work as the failed messages in SOST can't be recorded.
I have find the solution by using FM 'SX_SNDREC_SELECT' and got the Error once.
Using 'perform requeue using    lt_resend changing counter'
from standard send the error mails into the Queue.
This solution will be helpful.

Similar Messages

  • Personal Records Program for Mac

    Hi -
    My wife and I are doing our wills, and are looking for a program that can present a record of our personal information (bank accounts, life insurance policies, safe deposit box, funeral plans, personal bequests, etc.), and wonder if anyone knows of a Mac program for OS X 10.4 and 10.5 that will allow us to enter and print information of that type. Thanks in advance for any help.
    Shelly

    What you are probably thinking of is a database: unfortunately there is a severe scarcity of these for Macs: Bento doesn't work on Tiger, Filemaker is expensive and difficult to use, the database section in Open Office is frankly a mess, and AppleWorks is no longer available.
    However, there can't really be all that much information? - a few bank accounts, not a hundred, and so on: your simplest option is probably just to create an ordinary word processing document and decide on a layout to make the information clear: divide into sections, and type the information in. Do it as a rich text file in TextEdit and it will be readable for the foreseeable future, which is more than can be said of some database formats.

  • Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi,
    I have done appraisal document creation for bulk using txt file.
    this fm used for single for creation in standard tcode (phap_prepare):  'WZ_HRHAP_0DOC_WZ01_START'.
    So create ztcode  usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
    While recording for single I have used manual option instead of automatic .

  • BDC Program for table control

    Hi Friends,
    I have an issue i am stuck here,
    i have to create BDC Program for XK01 tcode,
    and my requirement is that,
    i have three users first user want only three colum and second user want four column
    and third user want five column in table control,
    so how could i achieve it,
    please hekp me out.
    Thanks
    Vikash

    Hi Vikash,
    FORM bdc_dynpro  USING  p_program p_dynpro.
    IF user-one.
    FORM bdc_field  USING  fnam1 fval.
    FORM bdc_field  USING  fnam2 fval.
    FORM bdc_field  USING  fnam3 fval.
    ELSEIF user-two.
    FORM bdc_field  USING  fnam1 fval.
    FORM bdc_field  USING  fnam2 fval.
    FORM bdc_field  USING  fnam3 fval.
    FORM bdc_field  USING  fnam4 fval.
    ELSEIF user-three.
    FORM bdc_field  USING  fnam1 fval.
    FORM bdc_field  USING  fnam2 fval.
    FORM bdc_field  USING  fnam3 fval.
    FORM bdc_field  USING  fnam4 fval.
    FORM bdc_field  USING  fnam5 fval.
    ENDIF.
    Does this make sense?
    regards,
    Archer.

  • MOS document which covers steps to record video for TAR

    Hi all,
    From time to time our developers faces a bugs in forms or web in 11i/R12, I got a MOS document which explains the steps to record a video/ reproduce issue (using third-party record program) for Oracle engineers. But I lost it's number.
    Searched in MOS site, but didn't succeed. May be you have it's number?
    Thanks,
    Mikhail.

    Do these docs help?
    Working Effectively With Oracle Support - Best Practices (Doc ID 166650.1)
    How to create a Technical Software Service Request (SR) (Doc ID 1321379.1)
    Thanks,
    Hussein

  • BDC program for rebate with table controls

    Hi Friends,
    Iam Doing  bdc program for Rebate(TCODE VBO1) with table controls..
    can u give the solutions for table controls...
    if anybody having the code..please send me..
    Thanks & Advance,
    sampath

    hi,
    check this example it may help you.
    REPORT  ZSR_BDC_TBCTRL
            NO STANDARD PAGE HEADING LINE-SIZE 255.
    TABLES : RF02K,LFA1,LFBK.
    DATA : BEGIN OF IT_VEN OCCURS 0,
          LIFNR LIKE RF02K-LIFNR,
          KTOKK LIKE RF02K-KTOKK,
          NAME1 LIKE LFA1-NAME1,
          SORTL LIKE LFA1-SORTL,
          LAND1 LIKE LFA1-LAND1,
          SPRAS LIKE LFA1-SPRAS,
          BANKS(6) TYPE C,
          BANKL(17) TYPE C,
          BANKN(19) TYPE C,
          END OF IT_VEN.
    DATA : BEGIN OF BANKS OCCURS 0,
           BANKS LIKE LFBK-BANKS,
           END OF BANKS,
           BEGIN OF BANKL OCCURS 0,
           BANKL LIKE LFBK-BANKL,
           END OF BANKL,
           BEGIN OF BANKN OCCURS 0,
           BANKN LIKE LFBK-BANKN,
           END OF BANKN.
    DATA : FLD(20) TYPE C,
           CNT(2) TYPE N.
    DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
    INCLUDE BDCRECX1.
    START-OF-SELECTION.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = 'Z:\sr.TXT'
       FILETYPE                      = 'ASC'
       HAS_FIELD_SEPARATOR           = 'X'
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
      TABLES
        DATA_TAB                      = IT_VEN
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    PERFORM OPEN_GROUP.
    LOOP AT IT_VEN.
        REFRESH BDCDATA.
        REFRESH : BANKS,BANKL,BANKN..
        SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
        SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
        SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0100'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RF02K-LIFNR'
                                  IT_VEN-LIFNR.
    PERFORM BDC_FIELD       USING 'RF02K-KTOKK'
                                  IT_VEN-KTOKK.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0110'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFA1-SPRAS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'LFA1-NAME1'
                                  IT_VEN-NAME1.
    PERFORM BDC_FIELD       USING 'LFA1-SORTL'
                                  IT_VEN-SORTL.
    PERFORM BDC_FIELD       USING 'LFA1-LAND1'
                                  IT_VEN-LAND1.
    PERFORM BDC_FIELD       USING 'LFA1-SPRAS'
                                  IT_VEN-SPRAS.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0120'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFBK-BANKN(02)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    *perform bdc_field       using 'LFBK-BANKS(01)'
                                 'DE'.
    *perform bdc_field       using 'LFBK-BANKS(02)'
                                 'DE'.
    *perform bdc_field       using 'LFBK-BANKL(01)'
                                 '10020030'.
    *perform bdc_field       using 'LFBK-BANKL(02)'
                                 '67270003'.
    *perform bdc_field       using 'LFBK-BANKN(01)'
                                 '12345'.
    *perform bdc_field       using 'LFBK-BANKN(02)'
                                 '66666'.
    MOVE 1 TO CNT.
        LOOP AT BANKS.
          CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
          PERFORM BDC_FIELD USING FLD BANKS-BANKS.
          CNT = CNT + 1.
        ENDLOOP.
        MOVE 1 TO CNT.
        LOOP AT BANKL.
          CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
          PERFORM BDC_FIELD USING FLD BANKL-BANKL.
          CNT = CNT + 1.
        ENDLOOP.
        MOVE 1 TO CNT.
        LOOP AT BANKN.
          CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
          PERFORM BDC_FIELD USING FLD BANKN-BANKN.
          CNT = CNT + 1.
        ENDLOOP.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_DYNPRO      USING 'SAPLSPO1' '0300'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=YES'.
    PERFORM BDC_TRANSACTION USING 'XK01'.
    ENDLOOP.
    PERFORM CLOSE_GROUP.&----
    *& Report  ZSR_BDC_TBCTRL
    REPORT  ZSR_BDC_TBCTRL
            NO STANDARD PAGE HEADING LINE-SIZE 255.
    TABLES : RF02K,LFA1,LFBK.
    DATA : BEGIN OF IT_VEN OCCURS 0,
          LIFNR LIKE RF02K-LIFNR,
          KTOKK LIKE RF02K-KTOKK,
          NAME1 LIKE LFA1-NAME1,
          SORTL LIKE LFA1-SORTL,
          LAND1 LIKE LFA1-LAND1,
          SPRAS LIKE LFA1-SPRAS,
          BANKS(6) TYPE C,
          BANKL(17) TYPE C,
          BANKN(19) TYPE C,
          END OF IT_VEN.
    DATA : BEGIN OF BANKS OCCURS 0,
           BANKS LIKE LFBK-BANKS,
           END OF BANKS,
           BEGIN OF BANKL OCCURS 0,
           BANKL LIKE LFBK-BANKL,
           END OF BANKL,
           BEGIN OF BANKN OCCURS 0,
           BANKN LIKE LFBK-BANKN,
           END OF BANKN.
    DATA : FLD(20) TYPE C,
           CNT(2) TYPE N.
    DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
    INCLUDE BDCRECX1.
    START-OF-SELECTION.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = 'Z:\sr.TXT'
       FILETYPE                      = 'ASC'
       HAS_FIELD_SEPARATOR           = 'X'
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
      TABLES
        DATA_TAB                      = IT_VEN
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    PERFORM OPEN_GROUP.
    LOOP AT IT_VEN.
        REFRESH BDCDATA.
        REFRESH : BANKS,BANKL,BANKN..
        SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
        SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
        SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0100'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RF02K-LIFNR'
                                  IT_VEN-LIFNR.
    PERFORM BDC_FIELD       USING 'RF02K-KTOKK'
                                  IT_VEN-KTOKK.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0110'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFA1-SPRAS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'LFA1-NAME1'
                                  IT_VEN-NAME1.
    PERFORM BDC_FIELD       USING 'LFA1-SORTL'
                                  IT_VEN-SORTL.
    PERFORM BDC_FIELD       USING 'LFA1-LAND1'
                                  IT_VEN-LAND1.
    PERFORM BDC_FIELD       USING 'LFA1-SPRAS'
                                  IT_VEN-SPRAS.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0120'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFBK-BANKN(02)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    *perform bdc_field       using 'LFBK-BANKS(01)'
                                 'DE'.
    *perform bdc_field       using 'LFBK-BANKS(02)'
                                 'DE'.
    *perform bdc_field       using 'LFBK-BANKL(01)'
                                 '10020030'.
    *perform bdc_field       using 'LFBK-BANKL(02)'
                                 '67270003'.
    *perform bdc_field       using 'LFBK-BANKN(01)'
                                 '12345'.
    *perform bdc_field       using 'LFBK-BANKN(02)'
                                 '66666'.
    MOVE 1 TO CNT.
        LOOP AT BANKS.
          CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
          PERFORM BDC_FIELD USING FLD BANKS-BANKS.
          CNT = CNT + 1.
        ENDLOOP.
        MOVE 1 TO CNT.
        LOOP AT BANKL.
          CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
          PERFORM BDC_FIELD USING FLD BANKL-BANKL.
          CNT = CNT + 1.
        ENDLOOP.
        MOVE 1 TO CNT.
        LOOP AT BANKN.
          CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
          PERFORM BDC_FIELD USING FLD BANKN-BANKN.
          CNT = CNT + 1.
        ENDLOOP.
    PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_DYNPRO      USING 'SAPLSPO1' '0300'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=YES'.
    PERFORM BDC_TRANSACTION USING 'XK01'.
    ENDLOOP.
    PERFORM CLOSE_GROUP.

  • What is the preferred virus scan program for iphone? I believe that I have a virus. My phone will come on by itself and it appears to be recording audio. I have read about spyware/surveilance viruses that will record audio and take photos.

    What is the preferred virus scan program for iphone? I believe that I have a virus. My phone will come on by itself and it appears to be recording audio. I have read about spyware/surveilance viruses that will record audio and take photos.

    My phone is not jailbroken.  I don't know what you mean about hacked.   Maybe it is hacked?   This is what is happening: About three times over the past few months I've noticed that my phone while "off" will come on (light up) and the screen shows an arrow towards the bottom; an arrow such that you would see on various "players" in order to "play" video or audio, I've searched my phone and cannot find any app that produces this particular screen though. Once I pick up the phone when this screen myseriously appears out of nowhere and press anything, it goes away and goes to the standard "slider" front page to unlock the phone.

  • I am running my canon camera on the EOS utility program for mac, and i was wondering if there is a keyboard shortcut to start video recording, instead of using the mouse.

    I am using EOS utility for MAC to run my canon camera at work. I have a foot switch connected to my macbook that allows me to take snapshots with my foot while i work ( i am a dentist and i have my camera hooked to a microscope). the way i did that is by programming a keyboard shortcut that snaps photos on EOS utility, to the foot switch software.
    So my question is: On EOS there is a video recording function, so i was wondering if there is a keyboard shortcut or if i can create a keyboard shortcut for the start/stop record function for video recording..

    Hi
    How much free space do you have on your boot disk ( Macintosh HD)?
    You may also like to add your current OS ;-)
    CCT

  • Custom program for Tcode MIR6

    Hello All,
    I have created a Zprogram for the Tcode MIR6. Activated sucessfully. But when executed getting dump.
    Please suggest me to correct this issue.
    Runtime Errors         SUBMIT_WRONG_TYPE
    Short text                 Incorrect program type with SUBMIT.
    Tried to correct the issue below but unfortunately unsucessful.
    You attempted to start the ABAP/4 program "YSAPMM08N" with SUBMIT, but the
    attributes specify this program as type "M" instead of "1". You can
    only start programs of type 1 with SUBMIT.
    Best Regards,
    Jai
    Moderator message: very descriptive error message, please do some own research before posting, read SAP documentation for SUBMIT statement and program attributes.
    Edited by: Thomas Zloch on Jan 19, 2012

    1. PSAVE-FIELDNAME will use the old values in the FIELD. It will be used in cases when we have to do plausibility checks on the basis of new as well as old value, eg, we want to use dynamic action for employees whose status changes from 'inactive' to 'active'
    2. Sequence no represents sequence no. If for a particular Infotype and FCode, we have to specify which step has to be performed first. Sequence no tells the system exactly this thing.
    Regards
    Lincoln

  • LSMW (recording)  for  Z - Tcode

    Hi experts,
    Is it possible to do LSMW(recording type)   with  Z   T-code... or not...
    Thanksin advance,
    Anthyodaya.

    Hi,
    Yes it is possible to do recording for ZTCODE,
    In the first step of the LSMW when you select
    the radio button - Batch Input Recording then by
    giving a Zname for your recording then entering
    it will again ask for the recording name and the
    TCODE name there you can specify your ZTCODE name.
    Hope it helps
    Regards
    Mansi

  • Regarding LSMW Recording for Custom TCodes

    Hi Experts,
    Can we do the recording in LSMW for Custom TCodes.Actually I have created a table(fields with data elements,provided technical settings) through LSMW Batch Input Method Recording.When I specify the file in 7th step it goes to dump.Could you please help me how to do this problem?

    Yes LSMW recording can be used for Custom TCodes, that is actually the main purpose for the recording option.
    Why you get a dump can only be determined by reading the dump. Usually this info is among the first 7 pages .

  • Need advice for installing a voice recording program

    On my old Dell I installed Microsoft Plus with an analog recording program. My new HP will not accept the software. Perhaps there is another program out there that will allow me to record school lessons to be put on CDs. any help?

    EFB, welcome to the forum.
    When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of the them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How to create a BDC program for given recording.

    i have to create a BDC program for uploading a file.
    currently i am using call function
      CALL FUNCTION 'F4_FILENAME'

    just check out the code below  it  is  for  updating two transactions
                           types Declaration                      *
    types: begin of t_tab1 ,
                vendor(10),
                material(18),
                pur_org(4),
                wglif(18),
          end of t_tab1.
                  Data Declaration                                 *
    data : begin of it_tab5 occurs 0,
              vendor(10),
              material(18),
             end of it_tab5.
    **DATA : BEGIN OF IT_TAB6 OCCURS 0,
             VENDOR(10),
             MATERIAL(18),
            END OF IT_TAB6.
    data: it_tab1 type standard table of t_tab1 with header line.
    data: wa_tab1 type t_tab1.
    data: wa_tab2 type t_tab1.
    data: it_tab3 like bdcdata occurs 0 with header line.
    data: it_tab4 like bdcdata occurs 0 with header line.
    data: it_tab2 type table of bdcmsgcoll with header line.
    data: d_file_name like ibipparms-path,
          d_file_name1 type string.
                       Start-of-selection                        *
    start-of-selection.
    FM for finding the flat file
      call function 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME        = SYST-CPROG
      DYNPRO_NUMBER       = SYST-DYNNR
      FIELD_NAME          = ' '
       importing
         file_name           = d_file_name.
      d_file_name1 = d_file_name.
    ******FM for uploading data from flat file into internal table
      call function 'GUI_UPLOAD'
        exporting
          filename                      = d_file_name1
         filetype                      = 'ASC'
      HAS_FIELD_SEPARATOR           = ' '
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
        tables
          data_tab                      = it_tab5
    exceptions
       file_open_error               = 1
       file_read_error               = 2
       no_batch                      = 3
       gui_refuse_filetransfer       = 4
       invalid_type                  = 5
       no_authority                  = 6
       unknown_error                 = 7
       bad_data_format               = 8
       header_not_allowed            = 9
       separator_not_allowed         = 10
       header_too_long               = 11
       unknown_dp_error              = 12
       access_denied                 = 13
       dp_out_of_memory              = 14
       disk_full                     = 15
       dp_timeout                    = 16
       others                        = 17.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
                     End-of-selection                         *
    end-of-selection.
      sort it_tab5 by vendor.
      loop at it_tab5.
        perform bdc_dynpro using 'SAPLBG00'  0101 .
        perform bdc_field using 'BDC_OKCODE' '/00' .
        perform bdc_dynpro using 'SAPLBG00'  1000 .
        perform bdc_field using 'BDC_OKCODE' '=BUCH' .
        perform bdc_field using 'BDC_SUBSCR'
        'SAPLBG00                                1101KOPF_1000'.
        perform bdc_field using 'GBGMK-GAART' '2' .
        perform bdc_field using 'GBGMK-GAERB' 'X' .
        perform bdc_field using 'BDC_SUBSCR'
          'SAPLBG00                          1103TAB_SUB_1000'.
        perform bdc_field using 'BDC_CURSOR' 'GBGMP-LSTNR(01)' .
        perform bdc_field using 'GBGMP-LSTNR(01)' it_tab5-material .
       call transaction 'BGM1' using it_tab3 mode 'E' messages into it_tab2
        refresh it_tab3.
        wa_tab1-pur_org = 'ABCP'.
        loop at it_tab2.
        endloop.
        perform bdc_dynpro using 'SAPMM06I'  0100 .
        perform bdc_field using 'BDC_CURSOR' 'EINE-EKORG' .
        perform bdc_field using 'BDC_OKCODE' '/00' .
        perform bdc_field using 'EINA-LIFNR' it_tab5-vendor .
        perform bdc_field using 'EINA-MATNR' it_tab5-material .
        perform bdc_field using 'EINE-EKORG' wa_tab1-pur_org .
        perform bdc_field using 'RM06I-NORMB' 'X' .
        perform bdc_dynpro using 'SAPMM06I'  0101 .
        perform bdc_field using 'BDC_CURSOR' 'EINA-WGLIF' .
        perform bdc_field using 'BDC_OKCODE' '=BU' .
        perform bdc_field using 'EINA-WGLIF' it_tab2-msgv1 .
        call transaction 'ME12' using it_tab3 mode 'E'.
        refresh it_tab3.
        refresh it_tab2.
      endloop.
    *&      Form  BDC_DYNPRO
         Start new screen
         -->P_FNAM  text
         -->P_FVAL  text
    form bdc_dynpro  using   program
                             dynpro.
      clear it_tab3.
      it_tab3-program  = program.
      it_tab3-dynpro   = dynpro.
      it_tab3-dynbegin = 'X'.
      append it_tab3.
    endform.                    " BDC_DYNPRO
    *&      Form  BDC_FIELD
       Insert field
         -->P_FNAM  text
         -->P_FVAL  text
    form bdc_field  using    fnam
                             fval.
      clear it_tab3.
      it_tab3-fnam = fnam.
      it_tab3-fval = fval.
      append it_tab3.
    endform.                    " BDC_FIELD
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 6:20 PM

  • How to supress a warning message in BDC for ME11 Tcode

    Hi Expert,
    I am doing a BDC report for ME11 Tcode and some of warning is ignorable for this transaction code,how can we suppress these warning through BDC program, is it possible or will have to make some changes changes in TCODE(ME11) itself.

    hi,
    if the warning message coming in a pop-up window then it can be supressed in the following way.
    1. comment the lines of the code of bdc recording of that pop-up screen along with the perform of bdc ok code  '=ENTE".
    2. use the structure ctu_params and fill the correspondings fiels, particularly the field nobinpt = 'X' and then use this structure in the call transcation statement as
    call transcation 'ME11'
                            using bdcdata
                            options from opt ( structure of ctu_params )
    3. At the time of recording use the option of check box " no batch input session ".
    regards,
    Alok

  • Problem in creating a BDC program for transaction cj20n(project sytem)

    Hi all,
    I am trying to create project,WBS element ,network and activity using a BDC program,
      I am able to create to a recording for the transaction cj20n using tcode shdb but when i run the recording it doesnt run properly i am not able to create any thing.
    I get error saying that a particular field doesnt exist on the screen.
    Is possible to create a BDC program for transaction CJ20N ?
    Also is there any other alternative  apart from using a BAPI or a function module.
    Thanks,
    Nishant

    Hi,
        Check below link for BAPIs of transaction cj20n.
    [BAPI for cj20n|BAPI for CJ20N transaction]
    Thanks,
    Asit Purbey.

Maybe you are looking for

  • Oracle 11g: Block Corruption in SYSAUX File

    Hello All, I am facing Data corruption issue in the SYSAUX file. We are using Oracle 11G (Microsoft 32 bit) and our system is running in noarchivelog mode. Following are the errors in the alert log. e:\sc\sc15.2\databases\oracleconfig\diag\rdbms\enms

  • Choosing a midi keyboard for garage band

    Hi All, I am buying my daughter a keyboard and would like to ensure that when she gets her new Mac taht it will work. I am looking at the Yamaha YPT200 or the Casio CTK-800 If anyone has some experience with these and can offer feedback that would be

  • Can't Pair iPhone to iPad using Personal Hotspot

    Hello. I have an iPhone3GS and an iPad (WiFi only). I recently updated my iPhone to use the new 4.3 software and see that it now has the "Personal Hotspot" option. I called AT&T and activated the functionality. However, it appears that I can only use

  • HT4053 cant get iphone passbook to work get cant connect to itunes message

    passbook does not work just get cant connect to itunes message

  • Inbound and Outbound Telesales

    Hi, Can any one please help me out to find the configuration documents related CIC settings which needs to be done before creating Profiles( Visible Componenets). Also please help me out in finding the CTI configuration in SAP CRM system. Thanks in a