Recording with the SB Audigy 2 zs plat PRO external is horribly low volume... setup probl

I have my guitar plugged into line /line 2 and whenever I enable recording, the sound that is recorded is incredibly low. I have to set my speaker and system volume to the max just to hear a little bit of sound(i have the 7. S750 creative speakers). I also experiance this with the mic i'm using. I'm using a cheaper professional Shure microphone and have it hooked up, via a XLR converter form radio shack, to my external SB hub. This mic requires no pre-amp and its turned on but the sound is also very low. I was wondering if this is normal, or if i'm missing some vital peace of information on how to record properly. Oh and also, I have the recording volume maxed in media source and on the external hub and I have also used the M-Audio: mobile pre usb, to record with the same guitar/microphone, and it sounded fine volume wise, what gives? my rate is 320 bits.

OldPainless,
I'm hoping that means that you found the connector and all is working now? I know it happens around here more often than we would like to admit. Frequently swapping out hardware leads to forgotten things like this.
Daniel

Similar Messages

Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

Since Mavericks update my iPhone and iPad calendars
are NOT syncing with the calendar on my MacBook Pro.
I used to use iTunes but don't see the options now.
Does anyone know how to set up a sync.?

I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
both calendar and contacts and imported them in the MBA and synced normally.
Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
update the iphone until a permanent solution is found !
And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
I'm sure Samsung is having a ball ever since the sync issue was made public !
Hopefully Apple is listening and will make things right again !

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
Powerbook G4 Mac OS X (10.4.7)

Reducing time while Filtering Out New Records with the Same Key

Hi Experts,
I have an issue .. I am trying to load data into 0MATERIAL . While loading via DTP the step u201CFilter Out New Records with the Same Keyu201D takes much time for processing . For each datapackage it is taking around 30 minutes to filter out new records with the same key . While for other master data it hardly takes 5 minutes.
Any pointers how to reduce the timeu2026
Thanks in advance
Sam

Hello,
No there is no need to do that change then.
Can you tell me are you doing a full load daily to 0MATERIAL object.
why dont you use delta.
Also if the DTP is of type FULL, then are you deleting the previous PSA requests.
Maybe you can ask the basis guys to check with a trace what is really happening on the DB side during this 30 mins and then maybe we can find the needed fix.
Regards,
Shashank

Problem viewing videos I recorded with the phone

When trying to view videos I recorded with the phone, It gives me a message saying it is impossible to view this multimedia file format!
It has been recorded with the phone and it can't watch it on the phone!? It doesn't recognize its own recording format
Help please

If the format is in 3GP you can view it with a player called VLC (http://www.videolan.org/vlc/), or can try a video conversion program to convert it into a format your computer can read. Once such program can be found here http://www.avs4you.com/AVS-Video-Converter.aspx
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

HT3798 my iPod was originally connect to an old HP. The HP has since died and now I own a Macbook pro. I want to transfer the music from my iPod (originally synced with the HP) to my Macbook Pro. Is this possible without losing the music on my iPod?

my iPod was originally connect to an old HP. The HP has since died and now I own a Macbook pro. I want to transfer the music from my iPod (originally synced with the HP) to my Macbook Pro. Is this possible without losing the music on my iPod?

Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Finding the record with the latest date

Post Author: sconlon
CA Forum: General
Hi,I am using CR 8 with an Access database which has a table that holds (multiple) sales records for each of our clients. I want to create a report that lists only the latest sale from each client. I am thinking that I first need to group by client and then create a sub-report that prints the necessary details of sales record with the latest date of sale. It's this last bit that I cannot figure out how to do. Can anyone suggest a way of doing this?Many thanks,sconlon

Post Author: Jagan
CA Forum: General
Charliy's suggestion if fine, and does require sorting and displaying in the group header/footer according to the sort order. In case it's not clear, when you print in the group header you are using the first record's data; when you print in the group footer you are using the last record's data (first and last within the group that is).
Personally, I'd group on the client have a group selection formula of:
{table.date_field} = maximum({table.date_field}, {table.client_id})
so that there's no date sort required as you'll only get one record per client group - assuming that each record has a unique date of course. I'd probably still suppress the details section and display in the group footer, but it wouldn't matter if you use the details section either.
I believe the benefit with the group selection formula is that any summary formulas, running totals etc. you use would only have the one record per client to work on, rather than including all of the suppressed records too.

Anyone know how to get to the setting so i can record with the keypad instead of the mouse?thanks

Anyone know how to record with the computers keyboard on logic rather than the mouse on piano roll?

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

DTP error: No Message: Filter Out New Records with the Same Key

Hello SDN,
I have looked up solutions for this problem, but didnt find anything suitable. I am getting this error in multiple places: when i load pure master data into IOs like 0VENDOR, 0PLANT etc. or when I load DSOs like 0FIAP_O03.
When I checked the load in sdn, one of the solutions was to apply note: 1489178 , but in this case, the user had nothing selected in his 'semantic key' list. Whereas, in my case.. 0PLANT is checked ...eventhough the other fields are disabled. So, I think my DTP is accurate.. as 'plant' is the only key field here. But it still fails .. and so does 0VENDOR load. Moreover... the DSO load is crucial for our reports in Prod and its failure is a bigger issue for us.
Has anyone seen this problem? Is there another solution other than the above note?
Regards.

Hello Arvind,
If I select that option, will it delete one record if it finds 2 records with the same semantic key in 1 data packet. Also, will it delete a record if it finds that there is already a record existing in the data target with the same semantic key.
I think, both of the above scenarios will result in incorrect data. From my understanding, 'Handle Duplicate Keys' is mostly used to filter out master data.. as in some instances.. you might get duplicate entries.
But, in my case, the same error is happening in the case of data load from 0fi_ap_4 --> 0fiap_o03. What happens is... the overall status of the DTP becomes green.. but when you look at details section, the process stops at this message which is in yellow. Because of this, the DTP status in the PC remains yellow.. and finally turns red.. and the PC turns red.
From my knowledge, it appears more like a bug. I was hoping to find a SAP NOTE which has some manual instructions that can resolve the issue, since the above NOTE asks for a support pack upgrade.. which would need a whole lotta testing.
Regards.

Record filtered in advance as error records with the same key exist

Dear Masters
I am getting below error for master data (0MATERIAL_ATTR), while loading data from PSA to Info object through DTP (I have set the Handle duliocate record also). When I checked that error data in Error Stack, I am getting below error for all records(100)
"Record filtered in advance as error records with the same key exist"
Could u please help me to resolve this issue
Thanks in Advance
Raja

Hi
Thanks for reply
I have loaded the Delta data in PSA. In PSA data was loaded successfully. I got the failure only when I loaded the from PSA to Maste data
Thanks in advance
Raja

Record with the DIMID 6 contains non-fitting time characteristics

hello guys,
I made a test on our transactional infocube in the RSRV and I got the followings messages:
*Record with the DIMID 6 contains non-fitting time characteristics
*No master data found for characteristic of test described subsequently
*No master data found for characteristic of test described subsequently
this happens in many DIMID's. an the infocube was partitioned.
I executed the correct error buttom but nothing.
any idea how to fix it?
thks
EV

Hello Emiliano,
did you find a solution?
Regards Murat

Send emails from a csv file (grouping records with the same email addresses)

Writing a script to send emails from a csv which contains record details and email addresses using the Send-Mailmessage cmdlet.
That part is no trouble, however, the csv file contain records that can have the same email address.
Is there a way/method I could send the records with the same email address once instead of sending individual email messages?
Thanks
Data in the csv file
Record number, description, email
1234, Test 1, [email protected]
5678, Test 2, [email protected]
1245, Test 3, [email protected]
4578, Test 4, [email protected]
$data = Import-csv c:\records.csv
ForEach($address in $data)
Send-mailmessage -To $address.emails -from [email protected] -subject "List of records" -Body $data -SmtpServer 192.168.1.1

The following code does what you are looking for:
$data = Import-csv c:\records.csv$mx = "192.168.1.1"
$subject = "List of records"
$from = "[email protected]"
$data| Group-Object email|Select-Object Name, @{n='msg'; e={$_.Group| Select-Object -Property "record number", description|ConvertTo-Csv -notypeinformation|Out-String}}|
ForEach-Object {Send-MailMessage -to $_.Name -Body $_.msg -SmtpServer $mx -Subject $subject -From $from}
I also recommend no forcing everything into one line. "One-liner" means "one pipeline" not putting all code on one unreadable line.
Your code should look like this:
$data|
Group-Object email|
Select-Object Name, @{
n='msg'; e={
$_.Group| Select-Object -Property "record number", description|
ConvertTo-Csv -notypeinformation|Out-String
}|
ForEach-Object {
Send-MailMessage -to $_.Name -Body $_.msg -SmtpServer $mx -Subject $subject -From $from
Now we can see the code and see that you are still unnecessarily converting back and forth.
To get the group look at how I did it.
$body=$_.Group | Format-Table |Out-String
Isn't that much easier?
Once you master the pipeline these things will become second nature. In PowerShell it is not necessary to write lots of code most of the time.
¯\_(ツ)_/¯

All tool icons are gone from safari and apple mail tool bars. Tool tips works when you hover over the box with the missing icons. Macbook pro OS

all tool icons are gone from safari and apple mail tool bars. Tool tips works when you hover over the box with the missing icons. Macbook pro OS X 10.8.4
The boxes that the icons were in are still there, but no icons

Hello jo90733,
I would recommend reinstalling Mountain Lion to replace the missing/damaged components of these applications. While the process shouldn't affect any data (images, music, etc) you have on the system, it's always a good idea to have a backup in place prior to reinstalling.
OS X Mountain Lion: Back up your Mac
http://support.apple.com/kb/PH11371
OS X Mountain Lion: Reinstall OS X
http://support.apple.com/kb/PH10763
Important: You need to be connected to the Internet to reinstall OS X.
Choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
If you’re not connected to the Internet, choose a network from the Wi-Fi menu (in the top-right corner of the screen).
Select Reinstall OS X, and then click Continue.
Follow the onscreen instructions. In the pane where you select a disk, select your current OS X disk (in most cases, it is the only one available).
To start the installation, click Install.
Cheers,
Allen

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿c

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿can you help me

Some things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Pinnacle Studio 9 + Audigy 2ZS Plat Pro = HEL

After uninstall & reinstalling with a step-by-step procedure supplied by Pinnacle tech, I'm trying to find someone that had/has the same problem. Everything works fine except in Set-Up my sound card is recognized only in the "CD, Voice Over & Surround" drop down list, and not recognized in the Capture Source > Audio (Capture Devices) drop down list. Can YOU Help ?

Thx CTMan,
A few things:
You said to disable the realtek onboard sound via the bios of the motherboard; restart and see if it works but how do I do this?
You also said "make sure you have selected the Soundblaster Audigy 2 ZS as the device for recording (not only for playback" but surely if I disable RealTekl then thew Soundblaster will take over? If not, I normally select it via Windows sound control is that the way you reccommend also?
Also, "in your case when the Realtek onboard soundchip is enable, the Realtek onboard sound may be configured as the default device for recording instead of the Audigy 2 ZS)" but all I know is that I currently have the SB selected for both rec and playback - though there are no LINE IN or MIC options available.
I have just double checked by going into sound devices in Control Panel and the Plat Pro is already pre selected for record and playback.
Thx
Message Edited by Ice_9 on 07-24-2008 06:55 AM

Recording with the SB Audigy 2 zs plat PRO external is horribly low volume... setup probl

Similar Messages

Maybe you are looking for