Recovery System
Having trouble with my desktop recovery. I have a HP Pavilion a1310n. I run the XP recovery and just when I think I'm getting close I get the following error message: "Cannot create file c:\hp\bin\setRes.log.". I acknowledge the error and the system runs for little bit until I get the following message: "System is not fully installed. Please run setup again". I've run the system again and go through the same loop again. Any help is much appreciated!!!
OK- right now I am really not friends with HP! Why? because of a flaw in their script on my HP Media Centre m7480.uk-a which has left me stranded outside of my computer facing a dreaded destructive reinstall because all other methods of recovery (SUGGESTED BY HP) have resulted in a message which reads:
"Cannot Create file c:\hp\bin\SetRes.log"
This message arrives at the very last hurdle of recovery, using either partition or recovery discs...and what's more you are then locked our from SafeMode because a message arrives saying system is not fully installed please reinstall...so it's a stinking Catch 22 and it's impossible to get any sense or help from anyone at HP regarding it.
I use lots of HP equip in my life and always respected them as the top of the tree but now they have left me hanging from it!!
I'm in urgent need to resolve this and would be so grateful to anyone out there with a head and heart able to help me do it (and those others left similarly stranded)
Thnak you so much
fitzbillie x
Similar Messages
-
I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
ThanksI've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website. -
HT4718 FileVault 2, the Recovery System, and the use of Disk Utility
I have FileVault 2 turned on for my Lion-equipped Powerbook Pro. When booting from the Recovery System, however, the Disk Utility thereon cannot even verify the internal HD, much less repair anything. I am aware that this is due to the encryption, of course.
However, for external encrypted drives, all I need to do is enter the password to mount them. So is there something that one can do in order to get the Disk Utility on the Recovery System -- on this very same drive -- to recognize the main volume, in order to enable it to perform diagnostics?
Secondarily, if I put the Powerbook Pro into target mode, and connect it to another Mac (which I have not tried yet) will I be able to mount it from the other computer if (A) It is running Lion OSX or higher, and (B) I can provide one or more of the login passwords?
I am one who has always liked to keep my hard drives running smoothly (e.g using Disk Warrior, Drive Genius, Disk Utility...whatever). So this is a bit foreign to me to be unable to run at least basic diagnostics. Any input would be appreciated. Thanks.If you're talking about just the Recovery HD, you only need 1GB so use a 4GB USB thumb drive and the OS X Recovery Disk Assistant to create it.
If you're talking about the ML installer (installESD.dmg) use an 8GB USB thumb drive. -
Hard disk drives and recovery systems
I have a Hp Pavilion g4-1016dx system, I have ran the system check and get a quick check Hard Disk 1 303 message. I realize my hard disk is going out, my system did not come with a recovery disk upon purchase. Is there any way of downloading the recovery system to disk or a USB drive from a different computer? Also, I was told the hard disk is not completely shot, I had just downloaded pictures and other items the day before the HDD failure, is there any way to salvage these myself without having to pay someone $$$ to recover these items?
Any help is greatly appreciated as I am technology challenged.
ThanksHi,
First, regarding your existing files, try the following.
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
Another option would be to remove the HDD, place it in an external caddy - an example is on the link below - connect this to another PC and see if you can access your files.
External HDD Caddy 2.5".
Secondly, regarding reinstalling Windows 7 on a replacement HDD, there are Two options available.
1. You can order a replacement set of Recovery Discs using the link below - these will reinstall the operating system, all required drivers and nearly all of the original software ( the exception often being trials of MS Office ). They will also re-create all the original partitions, including the Recovery Partition.
Order HP Recovery Discs.
2. Another option you could consider is to create your own Windows 7 installation disc.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
Also, if possible, back-up the swsetup folder that can be found at the root of your C drive on your failing HDD.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium 64bit ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source ( Digital River ).
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Regarding the drivers etc you need, if you were able to back-up the swsetup this will contain all the software and driver installers for your notebook - if you weren't able to, drivers and software you may need can also be found Here.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Mac Pro (Early 2008) freezes, reboots to recovery system, trouble locating startup disk
I have two issues which may or may not be related with my Mac Pro. First, off and on for several months is has been frozen when waking from sleep. I can hit a key and see my desktop with the windows I left open, but I get the spinning beach ball and the time is typically several hours behind. The only way I can get it to start is to restart from the power button. This typically happens overnight when my computer has been asleep for a long time. Sometimes I hear the fan run while the computer is asleep and I don't know if that is related. I've tried switching from Firefox to Chrome to see if that was the problem since I typically have a few tabs open on Firefox when it freezes, but that does not solve the problem. The next step I plan to try is to get a can of compressed air and clean the fan and check if the video card air intake might be clogged, based on information I have read in various forums. Does anyone have other suggestions for things to try to eliminate the freezing? Another suggestion I read was to get a new logic board battery installed but I hate to lug this thing into an Apple store unless I really have to. Most of the time I'm comfortable fixing things on my own.
The second issue is that when I reboot after shutting down the computer with the power button, it does not always load the startup disk. Sometimes I get the recovery system instead, and if I try disk repair, restore from backup, or the startup disk option from the apple menu, it cannot locate the startup disk. Usually after a few tries, I can restart it and get my desktop, but I'm not sure how long that will work. I hoped that resetting the NVRAM would take care of this but it has not fixed the issue. When I do disk repair, it says the drive is fine. I've also used idefrag to clean up the drive. I'm thinking my hard drive might be about to die and I should just get a new one, but I don't want to spend the money if that is not the issue. I have 83 GB free on the drive so space should not be an issue.
Any suggestions on fixing either or both of these issue would be very much welcome! I need to make this computer last at least a couple more years.
Specs:
Mac Pro early 2008
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 8 GB 800 MHz DDR2 FB-DIMM
Graphics NVIDIA GeForce 8800 GT 512 MB
Software OS X 10.8.5 (12F37)Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that. -
Ideas to improve the Rescue and Recovery System
Hi,
some weeks ago I ned to restore my system, while this process there was some difficulties with the Rescue and Recovery. But First my configuration:
I'm using a T61p with Windows Vista Ultimate installed.
On the System there are 5 Partitions
1. Rescue and Recovery
2. Windows Bootstrap
3. BitLocker Encrypted Windows Partition
4. Linux /boot
5. Encrypted Linux LVM
So, one morning I tried to start my ThinkPad and nothing worked anymore. After a Short time I found out that the boot sector of the windows bootstrap partition was corrupted. The Linux Partition worked fine and was startable with a GRUB CD-Rom.
Ich checked out the Rescue and Recovery system and was sad that I isn't possible to recover the boot sector of the bootstrap partition. The only way to rescue my system was to reinstall windows at all!
Thats a bad solution, because you can recover the boot sector with every OEM-DVD of Windows Vista, but this DVD is not available for a ThinkPad user.
So I backuped my files and reinstalled the system. While the reinstallation process rescue and recovery gives the option to install windows on C:. But on such a multiboot configuration it is not very clear what drive C: is. After some experiment I think he is taking the first parition after Rescue and Recovery or the first free space after it. At this place it would be much better if I can choose a parition for the installation.
So, if a Lenovo engineer is reading this, please think about to:
- Include some tools like boot sector recovering in the Rescue and Recovery system
- Adding a mode where you can choose the parition to install Windows.
Over and above that I'm really happy with my ThinkPad.
Thanks for reading.Greetings,
This isn't so much a reply to Cobelius, or a solution, but a commiseration of sorts. Or at least an "I hear ya, buddy, I wish they'd improve some things about Rescue and Recovery, too."
I notice that no one else has replied to this thread. I hope at least that someone will read these posts, and pass 'em on to the appropriate developers.
Here's my story:
I am, overall, extremely happy with my brand, spanking new T500. So far, I'm only running a single OS, Vista Business 64.
However, I did make the following 'tweaks' to my setup, which brings out the flaws in the Rescue and Recovery software:
1) I used Truecrypt 6.1a to encrypt my system partition (leaving the original rescue partition intact)
(Side Note: Where my original drive C came with tons of empty space, I used DISKPART to shrink it a bit an created another primary partition as drive D. Hey, why the heck not? Originally, I wanted TrueCrypt to encrypt the entire drive, but this failed. Truecrypt said this was due to a hardware failure, but 20 hours of my life wasted scanning the drive with HDD Regenerator 1.51 revealed no bad sectors. So now Drive D is encrypted as an ordinary TrueCrypt container and mounted upon login. I'm okay with this solution, but if anyone wants to research why TrueCrypt couldn't do the whole disk, you have my thanks in advance.)
2) I bought a Maxtor BlackArmor(tm) hardware-encrypted USB external drive to use for my backups. I successfully used the Lenovo Rescue and Recovery tool to both create specific file backups as well as to image my entire drive C onto the BlackArmor device, once I mounted it (by running a built-in executable and supplying it with my secret password)
3) I set a Lenovo BIOS password for unlocking the boot hard drive.
So far, so good. I type the BIOS drive password, then theTrueCrypt password, and Vista takes over 12 minutes to become usable and, well, that's a Microsoft issue, isn't it?
But, here's the deal: WHAT IF I CAN'T BOOT FROM THE HARD DRIVE ANYMORE? Well, TrueCrypt made me create a bootable rescue CD which can restore my encrypted boot sector or permanently decrypt my hard drive. What it can also do is let me press the ESC key to boot without providing a password, which does a supposedly wonderful thing -- since it fails to boot my drive C, it takes me straight into the Lenovo Rescue And Recovery session.
The problem is, the Lenovo boot (version 4) takes me AUTOMATICALLY into a self-repair utility which wastes another 10 minutes of my time to finally tell me --d'uh-- that my boot sector is 'corrupted' (it isn't; it's merely ENCRYPTED by TrueCrypt. As it should be).
FLAW NUMBER 1: Rescue and Recovery should provide a default menu where automatic diagnosis is a CHOICE the user can elect not to make, or abort if it has begun.
FLAW NUMBER 2: You guys should enhance what appears to be a Vista PE environment (or BartPE, or whatever) with a few utilities, including an Explorer-like browser to examine the disk (which would snow nothing in my case, as my drives are encrypted), and a command prompt, and the ability to launch executables. The environment should also recognize USB drives.
As it happens, I used a third-party Vista PE rescue CD, Active@ Partition Recovery, to boot an environment having the utilities I needed. Using this tool, I was able to recognize a USB key that had TrueCrypt installed in 'traveller' mode (no windows registry keys needed). Running this app and providing my truecrypt password enabled me to unlock my Drive C, albeit by mounting it as another drive letter. This made it possible to read and write to my disk.
The encrypted Maxtor drive is visible, too, from this boot environment, but it appears as a CD-ROM drive, and yields no secrets until you run an executable file on it and enter the drive's password. And that worked, too. So I could find files to copy over to my hard drive, if I needed to.
However, in order to RESTORE files to my drive, I'd still need to be able to run Rescue and Recovery, or at least the Recovery portion. Which brings me to:
FUNDAMENTAL FLAW NUMBER 3: You need to create a Recovery tool that can run from within an external USB drive, without requiring shared .DLLs in various subfolders or windows registry entries. Lord knows, I certainly tried to copy RestoreNow.exe from C:\Program Files (x86)\Lenovo\Rescue and Recovery onto my Maxtor drive, along with whatever DLLs it called for, but it was hopeless. The damned thing just wouldn't run from the USB drive on the PE environment.
The way I see it, then, is that there really is no way to restore my hard drive should I suffer a catastrophic failure. Major bummer.
FUNDAMENTAL FLAW NUMBER 4: When I got my laptop, I created a series of recovery disks using the Lenovo supplied software. Booting with the first CD, however, only proved depressing, as I had to agree that the ONLY purpose for this CD was to recover my PC to factory-shipped condition. Which meant erasing my drive and restoring it with the contents of the other DVDs. But I want to restore what I backed up with Rescue and Recovery! My life SINCE the laptop shipped from the factory! Geez, Louise, why not let me choose to do THAT, too?
(Of course, the boot CD would need to allow me to execute the Maxtor program that unlocks my encrypted USB drive, and also let me execute TrueCrypt to unlock my hard drive.)
I sure hope someone forwards this to a developer who'll take it seriously, after s/he stops chuckling. You guys should just ship a usable Vista PE rescue CD with every laptop, I think. And a recovery-only tool that doesn't need DLLs or Registry Entries to run. It would help in so many ways.
In the meantime, I guess I'd better do all I can to ensure my laptop's hard drive doesn't die on me.
Again, other than for this teeny problem that "don't amount to a hill o' beans in this crazy world," I'm really happy with my T500.
Thanks for reading this, too. And happy holidays. -
I get an "install failed" message. "Recovery system can't be created—click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?
The first time I attempted to install ML was on a late 2011 MBP. It ran for three minutes then gave me the error message: Could not install OSX due to an unexpected error. I was using the original ML install app, not a USB or other drive.
After a couple of restarts wiht the same result I saw a message to the effect that the install was trying to close open apps. I closed apps manually a few times to no avail. I shut down instead of restarting then booted into Safe mode (hold down the shift key when starting) and that did it. The install went smoothly after that.
I since installed ML in two iMacs using a cloned copy of the install app on a USB drive. This time I shut down the computers and booted into Safe Mode first and there were no problems.
I don't know if this issue is the one causing you these problems but it is a simple enough solution to try.
Jay -
HP Pavilion dv6500 recovery system error 0x400100200001005
Hi, I have HP Pavilion dv6663cl notebook and the drive broke. It can not be recovered thus I replaced with new retail drive.
I run the recovery system from dvd but failed at 51% and gave the error 0x400100200001005. I tried several times but it always failed at 51% and same error.
I run hdd diagnostics from bios and the new hdd passed.
The recovery dvd was created with the original hdd. I used it before and it was successful to do recovery on the original drive.Two possible causes.
1-Is the new hard drive at least as large a capacity as the original? Can be larger but not smaller.
2-Is the new hard drive an Advanced Format hdd-usually stamped with AF on label.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Change language of Recovery System from Japanise to Italian
Hi everybody!
I recently bought a used 15" MacBook Pro in Japan and can' t install Lion because
the interface of Recovery System is in Japanise!
What can I do to solve this problem?
There are japan caracter and I can' t follow the correct procedure!
Thanks in advance
FabioTo change the Recovery language, choose the third option (starting from the left) of the menu bar, and choose the first option. This will allow you to change its language
-
K330 Recovery system - how does it work?
Hi, I'm about to buy K330 with i5 processor, but before I do, I'd like to know something about Lenovo Recovery System.
So did I got this right: When you work on computer, and want to save everything you've done, you press one button on top of the computer. In case the computer crashes or gets infected, you press the another button on top of the computer which is next to the button before, and the system restores with same documents and files that you had when you pressed first button.
Correct?As you need information regarding how to use OneKey Recovery in IdeaCentre K330. It recover the C drive of the computer to the factory default settings. With this operation, all of the existing data on drive C will be lost, whereas the content and format of the other partitions of the hard disk drive will remain unchanged.
OneKey Recovery is an easy-to use application. You can use it to restore your computer to the factory default settings.
Turn on the computer. When the Lenovo logo appears, press the F2 key on the keyboard to start the Rescue System, then you can select OneKey Recovery.
Follow the onscreen instructions to select the backup task you want to restore from and disk you want to install operation system, and press Next to start restoration.
Please wait during the process of system recovery. Do not interrupt the operation during the recovery process.
After the system is recovered successfully, the software prompts to restart the computer. Restart the computer and enter the system.
Note: System Recovery will overwrite all of the data on drive C. To prevent loss of data, be sure to back up relevant data before performing system recovery.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Help me,ANYONE!
I was a fool thinking downloading OS X MAVERICKS offline would be easy if I cleared my WHOLE HD, WELL the past 2 days ive been trying to figure it out in disk utilities and in terminal to run os x mavericks installer but nothing will work, it also says OS X cant be installed because a recovery system cant be crested.... plzz... someone help.. idk, ive been pretty **** emotional about this and about to throw laptop out the window..
Macbook pro
Specs are mid 2010 15" screen.This might depend on how you made your installer. If it is a flash pen installer that you made yourself, depending on how you made it, it has consequences on what is installed.
I am assuming that you have made an installer?
If you have and you did it manually, without using the Terminal command then it is a know caveat that a recovery partition is not installed as part of that procedure. The second method to create a bootable installer, using Terminal, will allow and install a recovery partition.
See here (without Terminal): http://www.macworld.com/article/2151706/create-a-bootable-mavericks-install-driv e-for-newer-macs.html
& here (with Terminal): http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html
Alternatively, have you zapped the PRAM and SMC, prior to trying to install?
See here: About NVRAM and PRAM
Some of these might help or even answer your query...
Good luck. -
Unable to install Lion on iMac 27" i7 (2010) - no recovery system
I tried to install Lion in my 27" iMac i7 (2010), but the install process cancels, because it's unable to create the recovery-system. The suggested URL for support (www.apple.com/de/support/no-recovery) doesn't exist. What now? And better ASAP!
I managed to install Lion after doing the following steps:
(1) Remove Boot Camp Partition - Boot Camp Assistant > Remove Windows Parition
(2) Repair Permission - Disk Utility > Repair Permission (for main HDD)
Lazlow wrote:
Found out what my problem is!
In creating the Recovery HD, the installer was trying to write a new boot.ini onto my Windows partition, but I have mine formatted in NTFS, so it couldn't write anything to it. I guess that's what Apple meant by me "tampering" with my Boot Camp installation. So I guess I just have to reformat the partition in FAT32 and I should be good to go.
Ref: http://forums.macrumors.com/showthread.php?t=1191078&page=2
So if you're having the same problem as I'm, you can try these steps to install Lion. -
Unable to install OS X Lion as "...it can't be installed on Disk Mackintosh HD because recovery system can't be created. Visit www.apple......"
Visiting the web pages does not help me can someone please point me in the right direction ?OK. You have a Boot Camp partition which is why the issue. See the following:
It seems the issue is that the space at the "bottom" of your available space when Lion installs it's partition is already occupied by BootCamp. The fix was to go into Disk Utility; Select your Hard Drive; Select Partition; Move the bottom of your main partition "up" a bit to create a space for Lion; close Disk Utility; Install Lion; once Lion is successfully installed, go back into Disk Partition and drag the bottom of your main partition back "down" to the bottom of the window.
In your case use Disk Utility to "shrink" your OS X partition a little more than 1 GB.
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired empty space. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.
Remember that you only need to shrink the OS X partition a little more than 1 GB. Now, when you try the Mountain Lion installation the installer will be able to make the Recovery HD. -
How can I install Mountain Lion OS... I get error message saying a Recovery System can't be created... Any help or ideas out there?
After a week of dealing with AppleCare we discovered there was a corrupted recovery disk on my hard drive when i upgraded from Snow Leopard to Lion, therefore not allowing the upgrade to Mountain Lion. So ended up backing up the computer, then formatting the computer and reloading SNOW LEOPARD then upgraded straight to Mountain Lion, then restored my user files. This has worked, and am so grateful to AppleCare for their tireless help with diagnosing and helping to sort this out! they've been fantastic!
-
When I start up my computer, its for some reason asks me to reset my password. I have three options here all leading to resetting the password. Each time I am told that I need to unlock my FileVault or that I need to unlock my HD Volume, what ever that means? When I reset the password it asks me to restart - and after I restart it goes to black screen for about 5 minutes before shutting down.
When I try starting the computer again and holding down cmd+r or cmd+s the same procedure starts over again.
How do I reach the recovery system????Triple-click anywhere in the line below on this page to select it:
{ diskutil list; echo; diskutil cs list; } | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that. -
Can't restore from Time Machine "error occurred adding a recovery system"
Here's the situation:
MacBook Pro with Snow Leopard was upgraded to Mountain Lion 10.8.2.
A Time Machine backup exists (on Time Capsule) from the day before the upgrade.
I am trying to restore the Time Machine backup to a blank hard drive connected to the MacBook via FIrewire, but after rebooting with Command-R and selecting the backup source and HD destination I keep getting this (unhelpful) messages:
"An error occured while adding a recovery system to the destination disk" and "the recovery system could not be added"
Is what I am attempting impossible, or is there something else going on? What use is Time Machine if I can't restore?Hi FranzKafka
I know it has been a while since your question, but the issue is possibly dependent on the blank HD, h=was it changed from the GUID partitioning? If so change back and you will find the Time Machine will restore back... without having to reinstall OSX. As you say, all of the original settings are captuered within TM.
Maybe you are looking for
-
How do I get the built-in microphone to work on my IMac? Camera works fine, but I can't record sound.
-
Acrobat looks blurry in windows 8.1?
I installed Acrobat X on a Windows8.1 machine. The content looks blurry. Any fixes?
-
Page number prefixes in pages panel?
Is it possible to add a prefix to the page that appears in the pages panel (and not just on the page itself)? For example, in quark I can add 'C' before the first page so that the page layout panel shows the first page as C1 for cover 1. I can't find
-
I need a few users of the HP DV6-6153CA To Talk about it
I am looking to bu a laptop sometimes for gaming, sometimes for office work. Not heavy gaming though. Maybe some Battlefield 3. I've had an acer in the past which overheated, so I returned it. I have come to a decision-- HP's DV6-6153ca(http://h10010
-
Sound goes off, goes bad then effects the PC
I'm a tumblr user and I spend most of my time there on my computer. Recently videos sounds started to go off after a few loops. Then it completely goes off or goes bad like the audio damaged terribly. Even the system slows down. When I checked other