Rectifier simulation problem in multisim

Hi, i've got a problem with my simulation results in Multisim. Why does it cut the voltage to <100V after the rectifier (see attached image)? I think on this computer is an old version installed but thats should be no reason for such behaviour.
When i build the rectifier out of 4 discrete diodes, it works.
Best regards,
hase
Attachments:
multisim.PNG ‏39 KB

Hase,
I checked the spice model for the rectifier that you are using and got it to work. I attached the picture that shows which variable you have to modify, it was set to 100V... that is why you would get that fuzzy thing going on... according to the datasheet it should work up to 1000V right?...
How to fix it.... double-click on the component... then from the value tab, click on the Edit Model button, and then on the spice text scroll down until you see the variable that is shown on the attached picture, you should see that it shows 100, change it to 1000. And then click on Change Part Model to finish. Give that a try, it should work.
Nestor
National Instruments
Attachments:
rectifier.JPG ‏23 KB

Similar Messages

Digital Simulation Problem, Xspice vs. VHDL

Hello EWB friends.
I am currently experiencing a problem with a mixed mode/digital simulation. The main problem is that the component that I am trying to simulate, a differential rs-485/422 interface transceiver, isn't commonly modeled using xspice syntax. Instead manufacturers and engineers that work with these interface components offer models written in VHDL (I suppose this is because creating this component in xspice is difficult/insufficient). This transceiver converts a differential analog rs-485/22 input signal to a TTL (0-5v digital) output and vice versa.
I am using Multisim V.10. The good news is that Multisim v. 10 supports mixed mode simulation using components modeled in VHDL. The bad news is that NI has discontinued Multi VHDL, which assembles the VHDL model into the .vx file format that is required for simulation with multisim. This is a problem for me; I understand that Multi VHDL v.8 works fine with Multisim v.10. Well that’s great and all, but NI does not sell Multi VHDL .8 anymore, it has been discontinued.
After weighing out my options I see two possible solutions to my problem. One is to obtain a copy of Multi VHDL v.8 some how, or have someone who owns the discontinued software to convert my VHDL model to .vx format for me. Two would be to design an Xspice sub circuit for this component (possibly a very slow and painful process).
I have noticed that some digital components are modeled using HDL and/or Xspice syntax; other components are only modeled using HDL (due to complexity). I have read and reviewed the Xspice user manual and examined its primitives. From what I understand the component that I am trying to simulate could be created as an xspice sub circuit, although most/all interface components are simulated with HDL. Does anyone know the limitations of xspice and what digital components are impractical to simulate using xspice? (Besides the obvious like MCU's and FPGA's) Or could anyone with Multi VHDL v.8 help me out and convert this file to .vx format?
This has been an on going simulation problem for me. I use analog interface to digital covertering drivers/receivers in the majority of my circuits and cannot simulate them using multisim. Any input, advice, or help would be greatly appreciated.
Here is the VHDL model that I am trying to assemble to a .vx file / trying to translate into xspice syntax. I converted it as a .txt so it could be posted, was originally a .vhd.
Thanks,
SPM
Attachments:
if490.txt ‏7 KB

I have Mutlisim 10 and under the simulation tab there is VHDL Simulation. Apparently in mine it is only a demo, but you can create VHDL components. I tried compiling your file, but it tells me that it is too large for the demo. It also says this " Better yet, purchase the fully function simulator by calling your local Electronics Workbench reseller".
"For information about how to purchase the Multisim VHDL simulator, visit the Electronics Workbench home page at http://www.electronicsworkbench.com"
The version number says 5.15a. This sounds like it may be old and not what your after. It problably would be best to contact NI or look on their website to see what may be available. It may be that you can purchase this as an add-on for Multisim 10, but I am not certain of that.
Sorry I couldn't help more.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Mac-App release build error-rectify this Problem

i generate release build from air file to mac version,i attach valid p12certificate releated to mac version,but i get this error,how do i rectify this problem or how to export air file to mac App Version.

I'm currently hitting the same problem. I first noticed an issue when I would make a minor change. I'd first test on the AIR simulator to verify that the change works. Then when I export for release, I noticed that the change was not reflected in my iOS build on the device. I deleted the bin-release-temp directory, and then started to receive the error. I've occaissionally been able to get a swf to generate, but it's been sporadic at best and I haven't been able to reproduce the swf generation in reliably. I'm currently running on OSX 10.8.2 with Flash Builder 4.7 Premium (from the creative clould). I've updated to AIR 3.5 from the gaming suite. Any thoughts?
Thanks very much for any help that can be given.
Josh

When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

I have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

I have the same problem. After updating to 6.1.2 my iPad 3,2 will not find Verizon network. It just says "Searching..." for ever. Any thoughts?

I have two iphones in my household and neither phone has the wifi greyed out, what is apple doing to rectify this problem

What are Apple doing to rectify the problem that the Wifi icon is greyed out and you can no longer get onto Wifi!!
This has happened on both iPhones I my household!!
It must be a problem with Apple as so many people seem to having the same problem.
I have tried resetting networks, resetting phone etc....nothing works

Broaden your perspective a bit. There are literally millions of phones out in the world without any issues at all. If you are reading posts on the internet about the ones with issues, then you would be left with the impression that they all have issues. Neither you nor I have data to support the existence of a widespread issue of this type.
Having said that, the only issue that matters is the one at hand; yours. Let's stay focused on that. Help is here and if we can't counsel you toward a software solution, then help will be available elsewhere, but at some cost to you.

Hi, I'm unable to use my speaker when I'm using Mac OS. However, I'm able to do so for Windows 7 OS on Bootcamp. Can anyone please advise on how to rectify this problem? I would greatly appreciate your help, thank you.

Hi, I'm unable to use my speaker when I'm using Mac OS, which means I'm unable to unmute, decrease or increase the volume. However, I'm able to do so for Windows 7 OS on Bootcamp. Can anyone please advise on how to rectify this problem? I would greatly appreciate your help, thank you.

Hi Zac, sorry to hear about your troubles, but that's why us other users are here to try to help in these instances.
Open Console in Utilities & see if there are any clues or repeating messages when this connection drop happens.

Problem in Multisim with transient analysis and initial conditions

Hello everyone,
I have a problem in multisim with transient analysis and initial conditions.
If I do transient analysis with automatically determined initial conditions the circuits works.
If I do transient analysis with user-defined initial conditions the circuits works in cases.
--Working with user-defined---
*## Multisim Component V2 ##*
vV2 3 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} 3)
*## Multisim Component R1 ##*
rR1 3 0 10000 vresR1
.model vresR1 r( )
--Working with user-defined----------
*## Multisim Component V2 ##*
vV2 1 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} 3)
*## Multisim Component U1 ##*
xU1 1 0 MEMRISTOR__MEMS__1__1
--Not Working with user-defined-------
*## Multisim Component V2 ##*
vV2 3 0 pwl(0 0 0.001 0 {0.001+1e-008} 3 {0.001+1e-008+1} -3)
*## Multisim Component R1 ##*
rR1 3 1 10000 vresR1
.model vresR1 r( )
*## Multisim Component U1 ##*
xU1 1 0 MEMRISTOR__MEMS__1__1
The costum component includes something like that:
.subckt MEMRISTOR__MEMS__1__1 plus minus PARAMS:
*Parameters values
+rmin=100 rmax=390 rinit=390 alpha=1E3 beta=0 gamma=0.1 VtR=1.5 VtL=-1.5 yo=0.0001
+m=82 fo=310 Lo=5
blah blah ...
.ends Memristor
Namely, if I combine the resistor and my custom component in one circuit, transient analysis with user defined initial conditions gives an error (timestep too small).

Hi Nik,
If possible, please post the Multisim file. This way, I can get access to all your settings.
Tien P.
National Instruments

TS3899 My emails are showing as 'read' but they are not read! How can I rectify this problem?

My emails suddenly keep showing as 'read' but they are unread. How can I rectify this problem?

Is the folder pane collapsed? View(or AppMenu/Options)/Layout/Folder Pane. Otherwise, deleting foldertree.json might fix it:
http://kb.mozillazine.org/Toolbar_or_windows_layout_not_working

I keep getting an error message that I have an invalid security code when trying to make purchased in itunes. But my security code and billing info are valid. How do I rectify this problem?

I keep getting an error message that I have an invalid security code when trying to make purchased in itunes. But my security code and billing info are valid. How do I rectify this problem?

Did you ever get an answer to this? Im having same issue now! So frustrating!

Please rectify this problem

in my company i am using oracle 10g as server and oracle 9i as client.
so i want to use systimestamp
so i used this query:
SELECT SYSTIMESTAMP FROM DUAL;
but error is comming:
ERROR at line 1:
ORA-03115: unsupported network datatype or representation.
so please help me to rectify this problem.

Hi,
SQL*Plus: Release 9.2.0.1.0 - Production on Wed Jul 19 16:38:18 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SQL> SELECT systimestamp FROM DUAL;
SYSTIMESTAMP
19-JUL-06 04.38.45.253511 PM -05:00
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Wed Jul 19 16:24:11 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> SELECT SYSTIMESTAMP FROM DUAL;
SYSTIMESTAMP
19-JUL-06 04.38.22.121594 PM +05:30
SQL> Regards

HT3678 everytime I open qt pro i have to enter the registration code. This is really annoying. Does anyone know how to rectify this problem?

everytime I open qt pro i have to enter the registration code. This is really annoying. Does anyone know how to rectify this problem?

This procedure will check for files in your home folder that are locked or have a wrong owner. It makes no changes and will not, in itself, solve your problem.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
find . -flags +uchg,uappnd -o ! -user $UID
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
If any personal information appears in the output, edit before posting, but don’t remove the context.

EM simulation problem

Hi,
I have been trying to solve this EM simulation problem in the attached project (from a customer) but with no luck. I have tried changing the interpolation/passivity options, switching to APLAC simulations, different AXIEM settings with/without AFS, #sim points, DC frequency in the EXTRACT block etc but the simulation just wouldn't complete without error. The consistent error is 'Vector fitting failure' for which I could find no help. I am sure there is something I'm missing here, would someone be kind enough to take a quick look and tell me how to go about solving this problem ?
Thank you!
Attachments:
LNA_grndpr_finfab1_toAWR.zip ‏94 KB

Hi,
I am looking into this issue right now. The ports are set up wrong on your extracted document, so I am trying to figure out a way to set them up correctly. I will get back to you once I find out more.
Thanks,
Ideen

I forgot my passcode How to rectify this problem?

I forgot my passcode, How rectify this problem?

Forgot your passcode to unlock your phone? If so, youll have to do a force restore
Now with the force restore, you will lose all the data on the phone but if you were backing up in either icloud or itunes, youll be able to restore from that backup.
Force Restore: http://support.apple.com/kb/HT1808?viewlocale=en_US
Restore from backup: http://support.apple.com/kb/HT1766?viewlocale=en_US

Suddenly on sunday while i was working, my macbook Air stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center could you please help me in rectifying the problem. Would th

Suddenly on Sunday while i was working, my macbook Air which i bought last year in Spetember from Arkansas, Little Rock stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center. Could someone please help me in rectifying the problem. Would thi issue also affect saved data. However, I have handed the notebook to Apple for reapirs and they will revert by Thursday 12/04/2012.

I just received some horrifying news from Adobe about my production suite. I just FINALLY learned today that what I've been trying to do for over a week now - CAN'T be done because of compatability issues involving updates of both Adobe & Microsucks Winders!!! I sincerely hope this is not your problem. Mine is ALMOST HOPELESS!! Being in this HOPELESS Obamma economy,,,, leaves NO STIMULUS in which to currently upgrade everything that needs upgraded for me to fully use my INVESTMENT in Adobe Suite - sad, horrible and SICKENING!!!
I just wanted to post this. And again, I truly hope you find a solution. Good Luck!

Rectifier simulation problem in multisim

Similar Messages

Maybe you are looking for