Red line - rendering issues

I have a project that is showing a red line above all the video clips. When I render the time line they go away, but as soon as I close the project and reopen it, the red line comes back. From what I have read on Forum and in Steve's book it means that my project settings and my video files don't match. I thought I had everything matched, this is a standard definition project using avi video files. I have a screen shot of the project settings. DV NTSC. 720 x 480,
Any suggestions on what might be causing this???
Here is the properties on the first clip.

I think I led us down the wrong path earlier.   I opened a new project and took the same video clips into the new project with the project setting for DV.
When I pulled them into the time line a dialog box comes up.
"Fix quality problems in the clips",
When I click yes, the redline comes in on the PE time line.   If I click no, then there is no color and the time line looks like it is suppose to. I must have clicked yes several weeks ago when I was pulling the clips in.   It was my first PE project.
As both of you have suggested, I anaylized the clip in GSpot.   I don't know what I am looking for, so here is my screen shot.   Sorry about the quality, I don't have "Snag It" and I am getting these with print screen and cropping in photoshop.

Similar Messages

Red line rendering

I keep getting a red line in the rendering bar every time i put a clip into the timeline, after reading the manual i was instructed to make sure that the clip and sequence settings were matching so i did this, but nothing has changed, i still can't put a clip into the timeline or even move it about without having to render it. Anyone got any pointers?
Would really be grateful for any help, cheers.

You can't change a sequence once it's been opened. Your changes to the setup will only affect the next sequence you create. So start a new one, make sure you have it set to match your clip settings. What are your clip settings? Conventional DV? Then use one of the presets; see the manual: easy setups.
Strongly urge you to dedicate 10 hours to running the tutorials and reading the getting started and setting up sections of the manuals. FCP is absurdly complicated.
bogiesan

CS5.5: timeline rendered, but still "red line"?

Hello,
I rendered the timeline with a nested timeline over night (> 10 h rendering time for 30 minutes video) to work with it in a smooth way, the folder "Adobe Premiere Pro Preview Files" contains a renderd file with 16 GB -- but there is still a "red line" in the timeline!
But why? 10 hours for nothing? Grr....
Thanks!
mtemp
Premiere CS 5.5, Win7/64

What are you editing, and does your sequence match your video?
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
What is your brand/model graphics adapter, and the device driver version?
IF you have nVidia... the driver version
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
I have a GTX285 using driver 296.10 and Win7

White screen with battery with red line across- software issue

My phone froze last week when I plugged it in for the night. The battery had been dying pretty quickly for the 2 weeks before that. So i took out the battery and put it back in and then this white screen appeared with a battery and a red line across. I replaced the battery and it still gives me the same message. I tried pluggin the fone into the computer and reloading the software from the blackberry site and still nothing. The computer is not even registering that the fone is plugged in. Help please! I am running out of ideas!

My phone froze last week when I plugged it in for the night. The battery had been dying pretty quickly for the 2 weeks before that. So i took out the battery and put it back in and then this white screen appeared with a battery and a red line across. I replaced the battery and it still gives me the same message. I tried pluggin the fone into the computer and reloading the software from the blackberry site and still nothing. The computer is not even registering that the fone is plugged in. Help please! I am running out of ideas!

VirtualDub to DV-AVI ~ Red Line...

Using VDub to DV-AVI before loading into PE4, I noticed that my converted file had the infamous 'Red Line' above it, suggesting it should be rendered for better viewing (and workflow).
How I got here is not pretty, but I'll give you the workflow:
An old analog tape to Sony Mini-DVD Handycam.
Export from Handycam as Mpeg2.
Mpeg2 to Windows Movie Maker (WMM).
Export from WMM as DV-AVI type I
DV-AVI to VDub, output as DV-AVI II.
The reason I don't go Mpeg2 to VDub is I get a constant Audio Compression error, so I goto WMM first.
Surprisingly, this seems to work fine and the vid/audio quality is acceptabe (considering where I started).
Because of the 'Red Line', the monitor view within PE is ugly, but Burn to Folder and play is okay (no jerk or sync issue).
I don't recall seeing Red on DV-AVI from VDub in the past, and was wondering if others witness the same (or maybe it's my weird workflow on Assets for this Project)...

Kodebuster,
With your AV on the Timeline, go to Effects and choose Audio Effects from the drop-down. You should then see ~17 Audio Effects. In my setup of PE4, Fill Left and Fill Right are #7 & 8 (top row). Now, if you have more VST's, or added Effects, the exact placement will likely differ.
I'd also suggest that you look into doing the Capture via an A-D "bridge," like the Canopus, or Pyro. This will save one MPEG compression, and also any conversions, as they both will Capture as DV-AVI Type II. Other than the Audio, you should be good to go.
Something that I often do with mono Audio is just copy (or bring in another instance of that Clip) to a second mono Audio Track. Now, I'm using PrP2, so there could be a reason to NOT do this in PE. I'm also Exporting the Audio as DD 5.1 SS via the Minnetonka SurCode plug-in, and I'll manipulate the two mono Clips, placing them, and adding other Effects to them, in different places on the Audio "stage." Usuallly, I'm just doing this with SFX Clips, and not the full Audio for an AV Clip.
Hope that this helps.
Hunt

Battery Icon with Red Line on BB 8310

So, how pervasive is the problem of theBlackberry 8310 and its icon with the red line across from it? Is it a problem with the battery? Or is it a problemwith the phone? IS there any fix?
Mine came brand new in a box a few daysago. It came with a blue battery (C-S2). As soon as I put the battery into thephone, the dreaded Icon (battery with a red line through it) showed up. I charged it, thinking that means the batteryis empty and left it charging for over 5 hours, hoping the Icon will go away.It never did, and now 4 days later and an infinite number of battery pulls, some with a twist or two, it is still there. If it was any otherpiece of technology I would dismiss it as junk. But, oh, this is the famous BB.
Instead, I did some research, have spentupwards of 15 hours over the last 4 days, trying to figure it out. I ran intolots of things on the Net, including the crackberry postings with people sayingthat they got rid of the problem by dropping (!!) the BB from 3-4 feet,sometimes repeatedly, until it fixed itself. Others report the problem aftersome time of use (flaky construction?). On this forum alone there are at least4 recent postings with the identical problem (search for “8310 battery line”and find the post of “Spyridonas” 12-13-08, of “black_black_b” 06-10-09, of “hades” 09-27-09 and of “Alien_X” 09-28-09. None of those seems to have got the attentionof anyone from RIM, and nobody offered any meaningful solution. As people have reported time and again, it isvery unlikely to be the problem with the battery, so we are left to conclude thatthe phones are lemons.
We spend lots of money for a useless pieceof junk and nobody at RIM cares. If this was a car, it would have been recalled a long time ago. I will get my money back and buy somethingelse, maybe a Nokia or even a Moto. Watch out RIM, you are pissing off a lot ofpeople, and some of them are the wrong people to piss off.

Alien_X wrote:
I did not overlook anything.
I think you did. You pointed out each instance you could find when this fix did not work. You failed to point out the dozens of times this fix did work.
So, to answer your initial post questions:
So, how pervasive is the problem of theBlackberry 8310 and its icon with the red line across from it?
Not very pervasive. It certainly is not one of the top ten problems judging from the questions I see asked here and elsewhere.
Is it a problem with the battery?
Could be. Have you tried a brand new battery (I forget if you said).
Or is it a problemwith the phone?
Again, could be. There could be an issue with your battery contacts on the device.
IS there any fix?
For most, yes. We've been over that.
Try cleaning the contacts on the device. See if that helps. Try a new battery... and often new batteries are very low or close to dead upon purchase so follow the directions above to charge and bootup.
Alien_X wrote:
To: JSanders,
I had already seen this bit of lame “advice” that has been circulating on BB boards and hadtried it several times,
Oh, thank you so much. You know, you get what you give. Your initial post above did not state what you had tried several times. We don't read minds, well, I don't at least.
Alien_X wrote:
Anytime you buy a brand new item and it fails to work after 4 days of trying anything you can find I”d say you got a lemon.
You've had it four days, brand new, and you haven't returned it for a new device? That would be my first suggestion had you stated that first off. I would not keep that device if first off it didn't work. But a lemon? Nah, it's not a pervasive problem inherent to the model, which is what a lemon is normally defined as.
Alien_X wrote:
My name is neither Gambino nor Gotti,
eh, your threats make it seem so, or that you want to be. Has nothing to do with race, just your attitude here.
Alien_X wrote:
To: JSanders,
  offer no meaningful assistance whatsoever, especially for a problem that has been known for at least 10 months.
Four days or ten months?
Alien_X wrote:
Sorry to everyone else, but the personal attack was not warranted and it needed a response.
This is a community support forum. Your post above just reaks of attitude. If you're expecting users here to flock to your post to help out with that kind of attitude and silly threats, well, as you can see, it just didn't happen.
Try being nice and seeking assistance, you might just get a better response. There's been NO personal attacks on you, I don't operate that way.
Alien_X wrote:
To: JSanders,
On Moto, much as you deride it,
I'm afraid that is just indicative of whole problem here, I don't think you are reading these posts. I didn't deride the Motorola. I said you'd love it, unless you consider that derision. How odd that you would. They have great devices.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Battery icon with red line

I have a curve that only displays the battery icon with the red line thru it.
I have tried 3 different batteries in it and have also tried reloading the OS thru DM but no luck. I have a second Curve that works just fine with all the batteries I have for it.
Is there anyother way to reload the OS without using DM to do it? or any other cure for the battery problem
keswan
Tech Assistant
Smith International
Two to the body, One to the head
We prefer them alive
But, We'll take them dead

Hi and welcome to the forums!
Try doing the application load with the battery out. It will error out and give a message similar to "unable to connect to device during a multi-stage load operation". Once you get the error, put the battery back in and try the application load again.
You may have to try this four or five times, but if you can "spark" it for the second it looks for the PIN and gets connected you can finish the load.
Make sense?
Thanks,
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Battery with red line after dropping 8800

Yesterday I dropped my 8800 on a laminate floor. Screen went all white. I took out battery for a few secs, then had blank screen with green led flashing. Now it just has a battery icon with a red line through it. Have I killed it? Be grateful for some help....

download desktop manager from this link
http://na.blackberry.com/eng/services/devices/
and this is the user guide
http://na.blackberry.com/eng/deliverables/5837/BlackBerry_Desktop_Manager-4.7-US.pdf
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Icon with red line through battery.

Please help me!
I have an icon on my blackberry that has a battery with a red line. I bought a new battery and yes, it is the correct battery. Battery works in another phone, but not in mine. I think it is not recognizing the battery. I have tried linking up with Blackberry desktop, but my phone is not turning on because it is not recognizing the battery and therefore has no power source. I have tried everything. I cannot download new software because whenever I hook it up to the computer it says it is waiting for the device to turn on. I have pushed the reset button and tried a soft reset, but nothing.
I would really like my phone to work again, but what I want most are my contacts and a recorded voice note and I am not sure they are backed up.
Sarah

And the issues started after the dropping of the BB? If so, that may void your warranty path...if it's still within the first year, that is. Given what you've described, I don't hold out much hope. Hands-on hardware-level assistance is what I think you need...which we naturally cannot provide here. I suggest you decide if it's worth what you need to go through to get that assistance (warranty or not, voided warranty or not, etc.) and then proceed accordingly.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blank screen showing battery sign with red line - possible solution

Hi to everybody,
I had a little issue with my Blackberry curve 8350i, but I think this might go with several models. One day my Blacberry updated an application and restarted, but when restarting suddenly I got a blank screen showing a battery sign with a red line. I took out the battery and put it in again, but no luck. I searched on many forums if anyone experienced the same as me. I found a lot of topics but no solution. I called tech support of my service provide and fortunatelly I talked to a tech guy who was willing to help. He said that this error message usually might appear when the battery is faulty, not original (not my case) or device is not working, but before taking a final statement he wanted me to try something first. He said to take out the battery, the SIM card and any extern memory card. Then to clean any contacts with air. I followed his instructions and after that the device worked again without any problems. I would like to share this experience on this forum maybe this will help other to to solve similar issues.
Best regards,
Julix

Excellent advice! I just had the same thing happen to me and your post solution fixed my phone.

Encore / Images Blacked out with RED line on top

New at this. I have 1.67gb left in my project. (I have a lot of photos) Any way when I add more (Shift / Ctrl / g ) When I look at the bottom Left where the slides show up I just loaded 2 of the 60 photos I can see but the other 58 are black. All 60 have this red line above them.
Can anyone teach me what's going on here:)
THANKS

Joseph,
You are possibly (note: "possibly") on the right track with the elimination of each slide show, until you find the one that is "possibly" causing the problem.
Get a spool of DVD-RWs (rewritables), and do a Project with one of your slide shows, then burn to DVD-RW and test that. Does all work as it should? In that Project, add another slide show, repeat the DVD-RW burn again. Still OK? Add another, and another. If the process hangs, errors out, on one, check it completely to see if you can spot a problem with it. Sometimes, it's some tiny glitch that ruins the whole Project, and you have to spend some time searching through tons of good assets, just to find the offending one, or ones.
As for the size concern, take a look at the Disc Tab in your Project Panel. There will be a diagram of the DVD with the used portion colored in. Does it show that you still have room? If not, check the CD-ROM area, just below, to see if you accidently added some content there. If you have exceeded the capacity of a 4.7GB DVD, Encore should give you an error message, suggesting that you go with a DVD-9 (Dual Layer), instead of a DVD-5.
Question: where did you get the info, that you still have 1.38GB of space on this Project, the Disc Tab in the Project Panel? If so, that should tell you that you DO have room, i.e. the Project is not too large. It would then follow, that you likely have some problem and my first statements might help you track these down.
Good luck,
Hunt
[EDIT] PS, Harm is only trying to help you explain your problem in enough detail, so that the folk who hang out here, can, in turn, help you solve your problem. As you can see from my response, I'm doing a lot of guessing, and much/all of it might be wrong. With more detail (per Harm's link), others will see what you started with, what you have done so far, and maybe even some hardware issues. The first couple of folk, who responded to you, are some of the best on this board.

Digitizing DVCPro 50 and Mini DV with the red line

I've digitized from DVCPro 50 with Capture Settings at DV 50 NTSC 48khtz and Video Playback at DV 50 NTSC 48khtz and Playback firewire 720x480.
Now I'm digitizing the Mini DV portion (Broll) with Capture Settings at DV NTSC 48khtz and Video Playback at DV 50 NTSC 48khtz and Playback firewire 720x480.
When I put clips of each in a sequence together, a red line appears over the DVCPro 50 footage. I render the DVCPro clip and both play fine.
Did I set up something wrong? Is there a short cut to rendering all my DVCPro 50 dailies? I can easily re-digitize the Mini DV footage but the DVCPro 50 deck was a rental and over 30 hours so can't back-track there.

Can't digitize the Mini DV's in DVCPro 50 settings because FCP won't let me, at least not without a DVCPro 50 deck so I'm going to try the export, re-import plan.
I want to be sure not to bolox up the media management so should I isolate the media? Here are the steps I'm contemplating:
tuck away all the FCP files on the scratch disc that pertain to DVCPro 50
create a new DV NTSC project with a new name
digitize the Mini DV media with DV NTSC settings and capture
export these files as DVCPro 50 to other drive with DVCPro 50 media
go back to the initial project and import bumped-up clips
put the MiniDV project and media in a folder
take the DVCPro files out their isolation folder

Adobe Premiere Elements - Red Line / Green Line

I have spent this past weekend working with Premiere Elements on my Mac (just purchased it along with Photoshop Elements 9). I can't seem to find a manual for it so so far I have been forced to work with it based on intuition. Thus far, I have been surprisingly successful. However, I do have some questions.
I have imported some videos that were previously ripped from DVDs into Organizer. I have place several clips into the timeline and made mostly edits like cuts and removal of audio files attached to the video files (no effects and no transitions). I have also imported an audio file (formatted in apple AAC) into the timeline that was purchased from iTunes. What I noticed is that there is a red line on top of the timeline and I am not sure why (not even sure what that means). While I'm editing, the program runs pretty sluggishly (ie. scubbing through the timeline is very blocky and not smooth) but so far it has not crashed. Also, the video quality while viewing on the timeline is somewhat poor. However, once I render the project to a .mov file it looks great and all the edit points I have done is on point and synced with the music.
Can someone provide insight for a newbie?

The red line indicates that the content under the timeline is not "native". When you click on the timeline and then hit the "Enter" key, you will see a progress bar that converts this area under the red bar to native properties and turns the bar green. Native to what? Native to the project presets.
When you launch a new project you will notice a small information under the project name etc, that looks something like "NTSC DV" or "Full HD 5.1 1920x1080i 30" etc. This is the settings in which the clips are to be imported. If you are sure about the exact properties of the clips that you will import and edit, I suggest you change these project settings manually when you create the new project. Else, all you have to do is launch a project with ANY setting, and enter a single file from what you have imported to the organizer. The switch to a correct project will happen automatically. Hopefully the other clips that you have for this edit session are from the same camera/with same properties. When native, there are no Red/Green bars above the clips.
The other thing about the red/green bar is that if any property of the clip is altered, (adding effect, changing opacity, changing the duration, placing any other asset above the clip etc) the bar WILL turn red. That is when you might see the playback issues. To correct this, you must render and then once green the playback will be really smooth.
And regarding your query about changing the project while you are editing, you cannot do that in Premiere Elements. If you have started editing in a particular project setting, you can save it, and continue editing later. But when you reopen the same project, the settings will be the same as the ones you created/switched to the first time.

My lightroom 5 catalog contains red lines on my images

Hi there, i have been using lightroom 5 for sometime now on my mac operating system, with very little problems. Upon opening my catalog today i have discovered red lines on my images which were not previously there before, and i don't know how this has happened, let alone how to get rid of them. I have read several forums of a similar error to do with photoshop cs5, these seem to suggest some error with the graphics card on the computer. has anyone else had the same or similar issue in the past and know how to fix this issue? Thanks, Alex
For reference the version of lightroom is 5.7.1.

Thanks for all the replies guys! here's some screen shots of the error.

TS3274 Monitor hazard red lines

my IPAD 1 - have hazard red lines a cross the monitor and i turn off and on but still the same, please help me Urgent ??
please advice

I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Red line - rendering issues

Similar Messages

Maybe you are looking for