Redirect based upon a form entry.

I'm trying to get one of two pages to load depending on a form entry.  The form consists of one text field (asking for the person's zip code),  If the zip code is found in a master table, I would like them to be directed to one page.  If it is not in the list, I would like them to be directed to another.
Any advice on how to tackle this issue?  I'm working with .asp in Dreamweaver CS4.
Thank you in advance from a novice!  -David

Well, I didn't try that with ADDT, but I think you should:
1- Create a recordset that queries the zip code column with a Filter set to the form element's data;
2- If the result is greater than 0 (if my memory is good, you have a Recordset_total in ASP), then it means that it's in the table... so you redirect to the first page... else, you redirect to the second page.
Hope this helps... If you need more details on how to do this, post back.
Nelson

Similar Messages

  • HTTP Redirect based upon SRC IP Address

    Is there a way to perform an http redirect based upon user's source IP address on the CSM/GSS environment?
    Logic:
    IF < src ip address is within exception list > THEN
    http redirect to URL2
    ELSE
    http to URL1
    END

    Is there a version of this solution (redirect by client source IP) for the CSS?
    I'm attempting to redirect clients from a few specific networks (source IP's) to the VIP of a second CSS using a service-type redirect and "prefer " ACL commands:
    clause 10 permit any 1.1.1.0 255.255.252.0 destination content owner/content-rule prefer service-type-redirect
    There is an "any any destination any" last clause in the ACL for the remaining source IPs. The ACL is applied to the incoming circuits leading to the webservers.
    A show of the ACL's shows all responses - no matter the client source IP - being caught by the permit any clause at the end of the ACL.
    Extra points: this is a one-arm design with source group destination applied (to return server traffic to the CSS) and traffic is https with SSL terminating at the servers (no SSL module). Content rules are set to be sticky for srcip. Both CSSs are answering content-based DNS queries for the same URL with their local VIP address (but controlling which DNS server clients query isn't readily possible, so static proximity using DNS didn't provide the answer).
    Each CSS is in a different data center: the idea is to keep traffic local by redirecting non-local traffic to its "local" (the other) CSS if services are active (and to keep traffic on the first CSS if the services at the redirected-to CSS are down).
    Don't want too much, do I? ;-)
    Thanks for everyone's time -
    -K.

  • Filtering entries in BP search based upon user

    Hi
    We are trying to filter out results shown in BP search, based upon users. For that we are trying to follow steps mentioned in IMG
    SPRO->IMG-> Customer Relationship Management -> CRM Cross-Application
    Components -> Generic Interaction Layer/Object Layer ->
    Component-Specific Settings -> Extend Object Model for Business Partner
    The field(region) we are using is already present in structure CRMST_HEADER_SEARCH_BUIL and as per my understanding we will be using method Adjust_Result_Table.
    But still I am not able to resolve it. Please help me in this regard.
    Thanx & Regards
    Hits

    Hi,
    The object that we work with at 2007:
    BuilHeaderSearchNew
    and not BuilHeader like at the last version
    so, we have to implement CL_BUPA_IL_HEADER_SEARCH and not CL_BUIL_HEADER
    1. Create :
    ZCL_BUPA_IL_HEADER_SEARCH
    with superclass:
    CL_BUPA_IL_HEADER_SEARCH
    2. At customizing:
    SPRO->CRM->Cross Application components->Generic Interaction Layer/Object Layer->component specific setting ->Extend Object Model for Business Partner
    add:
    External Object Name - BuilHeaderSearchNew
    Implementation Class - ZCL_BUPA_IL_HEADER_SEARCH
    Nou you can use this method for changing the result:
    ZCL_BUPA_IL_HEADER_SEARCH ->GET_RESULT_TABLE
    good luck
    ayelet

  • Freight posting in MIRO based upon multiple goods receipt.

    Hi
    In one of the companies they are requesting the freight charge to be broken into multiple lines (based upon multiple goods receipt)  instead of one consolidated balances in the invoice (MIRO).  Right now each time we do a MIGO against the same PO the system creates a seperate material document and the entry is (and that is correct) :
    Inventory  -      XXXX
    GR/IR (Cost)- XXXX
    GR/IR (Freight) XXXX
    PPV                  XXXX
    for example if migo is done 3 times against the same PO the system posts 3 seperate material document and everything is correct. 
    When we do a MIRO the system generates 3 seperate lines for GR/IR (Cost) but it consolidates GR/IR(freight) and posts the entire value in one line. 
    Requirement is : We want the system to break freight cost into 3 seperate in the invoice. 
    Did anyone come across this issue before.
    Thanks
    Joseph

    Hi Joseph,
    I guess you can use MIRO 3 times, and post separated delivery costs into 3 freight invoices.
    During each time, you can choose only 1 line to carry out the posting.
    Thanks and regards,
    Polly

  • Setting save directory and filename based on fillable form fields.

    Hello,
    I'm new to .pdf development in Acrobat. I'm trying to create a form which allows users to fill in data, then save a copy of the form to a directory and file name which will be based upon several of the fields in the document. Is this method of saving possible? I've tried a script but can't seem to make the process work.
    Thanks for the help!

    It's possible, but the code that does the actual save (using the doc.saveAs JavaScript method) needs to be in a folder-level JavaScript file and further in a trusted function and app.beginPriv/app.endPriv block:
    http://acrobatusers.com/tutorials/how-save-pdf-acrobat-javascript
    http://livedocs.adobe.com/acrobat_sdk/11/Acrobat11_HTMLHelp/JS_API_AcroJS.89.173.html
    or in a certified document that the user chooses to trust to execute privileged code. If you've done either of these, can you post the code you're using?

  • Report based upon material type against movement type for a period ?

    i need a inventory report which should be based upon materil type & movement type for a particular period.
    For example- for last monthe how much Raw material has been issued againast production order. i would like report to allow me  ROH and movement type 261/262 and period entry. MB5B does not satisfy my requirements, ist of all there si no material type/secondly it restricts itself if i use movement types
    thanks
    sam

    Hi,
    You can create a small program to get report.
    Input fields Date of posting BUDAT, Movement type BWART (Plant if required).
    Check field BUDAT (Posting Date. Should check based on input date field.) In table MKPF.
    If data falls in required date range. Pick MBLNR-MKPF (Mat doc number).
    Go to table MSEG compare MBLNR-MKPF and MBLNR-MSEG if same pick field MATNR-MSEG (Mat number).
    Go to MARA check MTART-MARA for picked MATNR-MARA (in previous step). Take the material type.
    Add the below fields to out put
    MATNR, MTART, BWART-MSEG (Movt type), ERFMG-MSEG (quantity posted), WERKS-MSEG (Plant received), LOGRT-MSEG (S. Loc received).
    Please take advise from ABAPer regarding prog logic
    Thank you,
    Anand K

  • How to make a value changed based upon values selected in dropdown menu

    Hi,
    I am making my first Dreamweaver website using Dreamweaver CS6 on a windows 8 PC.
    I am trying to make a website where the user selects different criteria; in this example an ipod's model, condition and size from three seperate dropdown selections (similar to www.itrado.co.uk) and then based upon these selections a value for their ipod is shown. However i cannot work out how to display a value which remains on the same page and changes based upon the values which have been selected from the dropdown boxes. I was planning on creating a database and then creating a simple code which retrieves the value from the database which corresponds to the three selected values, however i am not sure how to go about doing this.
    Any help would be greatly appreciated.
    Many Thanks,
    Henry

    You need scripts for this. Try this jQuery tutorial
    http://anthonygthomas.com/2010/03/14/display-form-fields-based-on-selection-using-jquery/
    Nancy O.

  • Seeking a Current Age calculation based upon b'day

    I'm seeking a Current Age calc based upon birthday and a set date in the future (5-5-2012) for a registration form.  I have zero Java or FormCalc background.  I'm using LiveCycle Designer 8.0 for the first time.  Any assistance would be appreciated.

    Thank you radzmar, sadly I do not know where to enter the formula you suggested.  I found a page that mentions FormCalc (Form Properties / Default tab under the File menu option).  My novice skills are not up to this challenge apparently.  ;- (
    I changed the field to a text field with Optional user input.  I’ll have to buy a book and read up.  ;- )

  • Trip Expense Types based upon Trip Activity Type

    Hi
    I have a requirement. I know that Travel Expense Types do have the permissibility based upon "Employee Grouping for Travel Expense Types". This is being done in V_T706B1 in the field 'ExpTy.Permissibility'. Based upon the group the employee belongs to, he/she can have the visibility to the expense type in 'Travel Expense Report'
    Now my requirement is can I have the same type of permissibility to travel expense types based upon the Trip Activity type. For example if I choose a trip activity type 'Billable to Customer' in Trvael Request Form I should be able to see expense types AIR, TRAIN while if I choose 'Internal Training' I should be able to see only TRAIN in Travel Expense Report.
    Is this possible?

    Dear,
    Open data element:SPKZL from SE11.
    Check the search help name:SH_EXPENSE_TYPES.
    Double click on the search help SH_EXPENSE_TYPES.
    You can find the search help exit name:PTRV_F4_EXP_TYPE_SH_EXIT
    Copy that PTRV_F4_EXP_TYPE_SH_EXIT into a 'Z' function module.
    Filter the expense type, in the loop,
    loop at spkzls where spkzl in t_spkzl_selopt and sptxt in t_sptxt_selopt.
      ****write ur logic here to filter the expense types based on the activity
    append spkzls to spkzls_help.
    endloop.
    After activating the above z function module, replace the standard function module with 'z' function module in search help exit filed.
    Thanks and Regards

  • Show or Hide fields based upon a variable value

    Hi,
    I am a rookie in the field of Acrobat. And my only question is :
    How to Circle a Form Field based upon a variable value .
    For example, If x=1, I want to circle Japan and if x=0, I want to leave it without any change.
    Please help me out. Thanks for your time and help.
    Thanks,
    Vijayvijay77.

    Hi George,
    I am pre-populating a Pdf file based upon the data submitted by the user. And I have to circle options selected in the form.
    I am writing coldfusion code to flatten, populate the form into a PDF form. The end result is the PDF generation with all the data in it.
    The data comes from the database, where I set variable values if any is selected or not.
    Thanks for your reply, I really appreciate your help.
    Vijayvijay77.

  • Age Calc based upon b'date

    I'm seeking a Current Age calc based upon B'date and a set date in the future (5-5-2012) for a registration form.  I have zero Java or FormCalc background.  Many thanks for any assistance.

    If you don't much response in the LiveCycle Forms forum you posted to, you might try the more active and equally appropriate one here: http://forums.adobe.com/community/livecycle/livecycle_es/livecycle_designer_es

  • Can a Content Query Web Part (CQWP) be used to filter content based upon a substring of a variable

    Folks, I'm a newbie to this forum and to SHarepoint in general - so please be gentle :-)
    I'm using Sharepoint 2010 and have content in lists which I want to display based upon certain user attribtes. For example I have a sharepoint LINKS list which contains entries for vaious applications (I'm using the LINKS list as an example, however I'd
    like to apply it to many libraries/lists).
    Name:UK Intranet - URL:http:UKintranet.com - Description: UK
    Name:USA Intranet - http:USintranet.com - Description: USA
    Name:UK Contacts list - http:UKPhones.com - Description: UK
    Name:USA Contacts list - http:USAPhones.com - Description: USA
    My users are split accross AD domains, one for each called UK and others in a domain called USA 
    What I would like to do in a content query is display items where the users domain (ie UK or USA) is contained in the Description field.
    So a CQWP which includes something like "filter when Decription = &userdomian"
    I should also add that I am only using basic page editing in a browser and have no access to Sharepoint Designer
    Can this be done?
    BTW - I know this is a little like Audience Targetting, however I don't have rights to setup audiences and as the information about the audience is already available in the users domain I simply wanted to reuse that.

    Hi Peter,
    According to your description, my understanding is that you want to filter items based on the current user’s domain.
    Whether you could access Central Administrator, and create a new user property in User Profile Service Application->Manage User Properties. If yes, create a new user property (assuming it is called ‘Domain’)to store the users’ domain information. If not,
    please choice a existing user property that you don’t use to store the domain information, like Department.
    Then do as the followings:
    Open the page that you want to display the list.
    Eidt the page and insert the list into the page.
    Insert a Current User Filter web part(Insert->Web Part->Filters->Current User Filter) into the page.
    Then edit the Current User Filter web part, and select value to provide: SharePoint profile value for current user: Department(or Doamin).
    Connect the Current User Filter web part to the list: Connections->Set filter values to->the list.
    Connection Type: Get Filter Values from, click Configure.
    Consumer Field Name:Description, click Finish.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How do you get different check box fields to display based upon a list box selection?

    I am a relative newbie with LifeCycle Designer ES using v.8.2.1 to create interactive forms to replace manual hardcopies.  I am working on a form that has a few pull down list boxes.  I want different check box fields to display based upon the selection of an item from one of the pull down lists.
    Any guidance on the best way to accomplish this would be greatly appreciated.

    Hi,
    Here is a sample with script in the change event of the dropdown. You may want to clear previous checkbox choices once the subform is hidden.
    It is good to group objects in a subform - that way you only need to hide the subform and not each object in turn.
    Good luck,
    Niall

  • When I type web address, suggestions appear of previously visited sites. How do I erase these please? Also in form entries. Sorry - I'm not great with technical terms!

    Does this make sense?
    I've tried erasing history but nothing has changed.
    All help is most appreciated.

    Your location bar or "Awesome Bar" can be set to display your bookmarks, history, bookmarks and history together, or nothing at all based on what you input into it. To change what content this bar displays or to disable the location bar autocomplete list altogether, see [https://support.mozilla.org/en-US/kb/Location%20bar%20autocomplete#w_changing-your-location-bar-settings Changing location bar settings]. Regarding form entries, the [[Form autocomplete]] article has information on deleting saved form entries or preventing them from being saved.

  • Calculate Shipping Costs based upon warehouse location

    My client has three warehouse locations.  Some products are shipped from one location, some from another.  How can I properly calculate shipping cost based upon which product(s) are placed in the cart given they could be shipping from multiple warehouses on a single order? 

    My attempt at this was to write some jquery
    I setup multiple shipping options for different postcodes (the option for a description in BC does not work so you end up with multiple entries with the same name... can this be fixed please).
    jQuery(function($){
    var sel = document.getElementById('ShippingOptions');
    for(var i=sel.options.length-1;i>=0;i--){
    if(sel.options[i].value == "-1")
    sel.options[i].text = "Select postage";
    if(sel.options[i].value == "75554")
    sel.options[i].text = "NSW Express Delivery";
    if(sel.options[i].value == "75555")
    sel.options[i].text = "NSW Standard Delivery";
    $('#shippingSpan').text("Select postage");
    The only issue is my weakness in jQuery
    It works for the initial load but if you change the shipping location a 2nd time it defaults back to the original.
    If someone can help with fixing this it would be appreciated.
    Regards
    Michael

Maybe you are looking for