Reduce field size and space between fields

Is there any trick to reduce the size of a field more than "normal" and the space between fields?
I'm creating a form that looks like at table of 5 rows and 8 columns.
Some of the fields is with list function, and they in special take more space than other fields.
When changing the form layout in the web browser I could move the "listfields" to different places and suddenly I can for example reduce them from 124 to 114 that is the smallest I have seen them. Also if try to reduce the same field later it just pops up from 114 to 139.
The space between fields is also annoying large when I try to keep this form as small as possible.
Why am I asking for this?
I know I can increase the size of the form, but I want it as small as possible for the smartphones.
The "listfields only contains number from 1 to 9, so they can be very small.

Hi,
We currently have minimum widths defined for each field type. It shouldn't be possible to reduce the size of a field below that minimum width. If possible, could you please share your form with me ([email protected]) to allow me to investigate the behavior that you are seeing with your "listfields"? Also, could you describe how you were moving fields when you saw the field width reduce from 124px to 114px?
Instructions for sharing a form can be found here - http://forums.adobe.com/docs/DOC-2462.
Currently the spacing between fields cannot be modified.
Regards,
Brian

Similar Messages

How to change font size and spaces between fields in SAPscripts?

Hi everyone!
I need help using sapscripts, 'cause I don't know what's the meaning of some symbols, for example: ,,<Z>&BSEG-HBKID</>. Now my question is what's for: ",," "<Z>" and "</>", I have no idea what does symbolas are for?
If anyone can help me I'll really appreciate it!
Thanks for your help!!!

Dear Guillermo,
To give a clear answer to your query.
I have the following.
when you are in one window and then go to the contents of the window in change mode.
There you can see that in the command editor i.e the editor where you are writing your code.
as illustarated above your editor looks like.
in the left box you give commands like /: or /* or a paragraph format which you have defined like 'P1'.
By defining this paragraph format you want to tell that the text which is written on the right box will use the font defined whether it is <b>BOLD</b> / <i>Italic</i> etc. whether it is justified or left-aligned etc. and also in the same paragraph format you will define your tab stops.
So when you write <b>,,</b> then it is equivalent to one tab stop. i.e how much margin you want to leave for this paragraph line to start from you page starting.
the symbol <b><Z></b> represents a character format only catering to the characters defined in between <b><Z></b> and <b></></b>This character format is defined through the push button charcter format in you form editor.
the <b></></b> indicates the end of the character format.
&BSID-HBKID&.
& represents that the value will come dyanmically which has been defined before in the Driver program or in the script itself through the <b>DEFINE</b> command.
The <b>BSID-HBKID</b> represents that the value will be got from the table BSID and field HBKID during runtime.
I Hope things are far pretty clear in this way.
If you still have any more clarifications please come back with any further queries, but not forget to reward appropriately.
Thanks & Regards
venugopal

How can I reduce the amount of space between paragraphs in Pages?

How can I reduce the amount of space between paragraphs in Pages?

Let's pretend that you told us which version of Pages you are talking about, and that you are using Pages 5:
click in the text > Format > Spacing > click on triangle to expand options > change Before/After
Peter

Reducing app size and using memory

Building with release preference Blank App template will give you a ~200kb .exe, which in running state use ~7mb of memory.
It has a huge list of external dependencies.
So, is it possible to reduce app size and using memory?
Or, how safely unlink from app headers that really didnt used?

generally speaking premature optimization is not a good idea.
Normally those tricks we learned from stone age are picked by tools already.
(http://stackoverflow.com/questions/6215782/do-unused-functions-get-optimized-out)
So if you experice performance/optimization issue
optimization ususally goes with repeated measure -> optimize -> verify
cycles.

Hit something when editing presentation and now slides are all reduced in size and not filling screen. Preferences, scale to fit doesn't work. What did I do?

Hit something when editing presentation and now slides are all reduced in size and not filling screen. Preferences, scale to fit doesn't work. What did I do?

Please give complete details of your system and the media and the project properties.

Gaps and spaces between slices in Dreamweaver

I'm running OS X 10.5.8 on a MacBook Pro, using Photoshop I created my webpage ( with the predefined html specs) and sliced up the areas I wanted to make links. Once I stated to make links it showed gaps and spaces between the slices. After I uploaded my site the page is fine in Safari and Chrome, but when firefox is used the spaces show up again. What should I do?
Here is my code:
<html>
<head>
<title>Brad Hager's Book</title>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<style type="text/css">

</style>
</head>
<body bgcolor="#FFFFFF" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">

<table width="1025" height="769" border="0" align="center" cellpadding="0" cellspacing="0" id="Table_01">
<tr>
    <td colspan="5"><img src="images/mybookonline_01.jpg" width="1024" height="20" alt=""></td>
    <td><img src="images/spacer.gif" width="1" height="20" alt=""></td>
</tr>
<tr>
    <td rowspan="6"><img src="images/mybookonline_02.jpg" width="3" height="748" alt=""></td>
    <td><a href="/jpegs/Brad Hager's Portfolio /index.html"><img src="images/advertisingportfolio.jpg" width="201" height="16" alt=""></a></td>
    <td colspan="3"><img src="images/mybookonline_04.jpg" width="820" height="16" alt=""></td>
    <td><img src="images/spacer.gif" width="1" height="16" alt=""></td>
</tr>
<tr>
    <td colspan="3"><a href="/stamp_resume.html"><img src="images/resume.jpg" width="216" height="15" alt=""></a></td>
    <td rowspan="5"><img src="images/mybookonline_06.jpg" width="805" height="732" alt=""></td>
    <td><img src="images/spacer.gif" width="1" height="15" alt=""></td>
</tr>
<tr>
    <td colspan="2" rowspan="2"><a href="/video.html"><img src="images/creations.jpg" width="203" height="15" alt=""></a></td>
    <td><img src="images/resume-09.jpg" width="13" height="2" alt=""></td>
    <td><img src="images/spacer.gif" width="1" height="2" alt=""></td>
</tr>
<tr>
    <td rowspan="3"><img src="images/mybookonline_09.jpg" width="13" height="715" alt=""></td>
    <td><img src="images/spacer.gif" width="1" height="13" alt=""></td>
</tr>
<tr>
    <td colspan="2"><a href="/creations.html"><img src="images/email.jpg" width="203" height="17" alt=""></a></td>
    <td><img src="images/spacer.gif" width="1" height="17" alt=""></td>
</tr>
<tr>
    <td colspan="2"><img src="images/mybookonline_11.jpg" width="203" height="685" alt=""></td>
    <td><img src="images/spacer.gif" width="1" height="685" alt=""></td>
</tr>
<tr>
    <td><img src="images/spacer.gif" width="3" height="1" alt=""></td>
    <td><img src="images/spacer.gif" width="201" height="1" alt=""></td>
    <td><img src="images/spacer.gif" width="2" height="1" alt=""></td>
    <td><img src="images/spacer.gif" width="13" height="1" alt=""></td>
    <td><img src="images/spacer.gif" width="805" height="1" alt=""></td>
    <td></td>
</tr>
</table>

<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<script type="text/javascript">
try{
var pageTracker = _gat._getTracker("UA-xxxxxx-x");
pageTracker._trackPageview();
} catch(err) {}</script>
</body>
<script type="text/javascript">
var _gaq = _gaq || [];
_gaq.push(['_setAccount', 'UA-10172368-3']);
_gaq.push(['_trackPageview']);
(function() {
    var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
    ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
    var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
</script>
</html>

using Photoshop I created my webpage ( with the predefined html specs) and sliced up the areas I wanted to make links.
This is OK for quick mock-ups but it doesn't work in the wild because graphics apps produce terribly rigid code that falls apart when you try to edit it later.
For best results, use Photoshop for images only. Save for web to your DW Local Site folder. Use DW to build your HTML and CSS code.
Taking a Fireworks (or Photoshop) comp to a CSS based layout in DW
Part 1 --
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
Part 2 --
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt2.html
Adobe Developer's Center - Getting Started tutorials
http://www.adobe.com/devnet/dreamweaver/?view=gettingstarted
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Space between fields in a page

Hi,
I have around 5 fields in a custom page one below the other. But i am unable to figure out how to create space between those fields vertically?
Any suggestions are appreciated.
Thank you

create new item and set its type as spacer
hope this helps
--Prasanna

Removing Commas and Spaces from Field

I have a table called TableD1 in a database with a field called "Range".
The ranges are like 1-1000; 1001-2000; etc. up to like 1000000-200000.
That is how they are supposed to look, they are not numeric fields, just general, containing a low, a dash and a high all in the same field.
I just discovered that quite a few of the entries have included commas and spaces, like 1-1,000 or 100000 - 200000.
I need to write a Query that will remove all of the commas from the data in TableD1's "Range" field, then all of the spaces.
I imagine they are some kind of Update statements but because of the potential to blow up the whole thing, I'm reluctant to experiment.
Does anyone know what code I should use?
Thank you in advance for any help.
Gee

Making sure you've taken a backup. Pull the data into temp table and do the testing. once you satisfied with the output then do the update on the main table.
create table #temp
Range varchar(100)
insert into #temp values('1-1,000'),('100000 - 200000')
select replace(replace(Range,',',''),' ','') from #temp
--update #temp set Range=replace(replace(Range,',',''),' ','')
Validate the the output of the select statement.
--Prashanth

"Transform": how do i create inbetween sizes and space evenly?

hopefully the titles have said enough. i've placed 2
different sizes of the same graphic symbol on a stage. one is on
the bottom left side of the stage, the other on the top right. i
want to create 5, inbetween sizes from small to large and
distribute them evenly on the center-line axis.
is there a way to do this?

All I can think of would be this:
Create a symbol of the largest size for your image.
Figure out the difference in size from the smallest to the
largest, then what each size should be for instances 2-4
Figure out the difference between 1 and 5 and space 2-4
accordingly. As with the sizes, you'll have to set all of this
manually.
I'm not sure if the positions and sizes will change
dynamically if the movie is resized, but I doubt it. If you want to
do that, you're probably looking at some major AS.

Reduce image size and print it out?

I scanned an image (coloring on a postcard). This size is too big to fit into a 'album' picture in MS Picture It! All I want to do is REDUCE the image and save it so that it will fit into the computer photo album I'm creating.
I've tried Image/Resize/Image Size and changed the sizing, but it still comes out the exact same size as the original. What am I doing wrong?

> I want to REDUCE the image, not enlarge it.
I understood that - what makes you think I didn't?
> It's 948x645 pixels. I just want the image about an inch (respectively) smaller
You can't think in terms of inches for screen images. You have to work in pixels and the actual size will depend upon the screen resolution on the machine being used to view the image.
I'd reduce the pixel size by about 80 to get the effect that you want. Use Image/Resize/Image Size and make sure that you have "Resample" checked.

HT201077 The photos I have transferred to my PC via Photo Stream are too large for me to share with friends. How do I reduce the size and how do I share them with friends and family only?

I have the latest iPad update on my Ipad 3 as of September 23, 2012.
I havejust taken a series of photographs with my iPad that I would like to share with family and specific friends ONLY. I have set up the photos I want to share in Photo Stream. I have synced them to my PC via iCloud. Everything is fine except, the pictures are far too large to share ... and I don't know what exactly I am supposed to do in order to give my family access to these Photo Stream pictures.
How do I reduce the size of photo stream pictures once they are on my PC via iCloud?
What exactly do I do to give access to the photos on Photo Stream to specific people?
How can I share the videos I have taken with my iPad?
Many thanks for your attention. I look forward to your reply.

Select your photo/s.
File menu > Export..
Kind: JPEG
JPEG Quality: Maximum
Include: [√] Title and keywords
[√] Location information
Size: Full Size
File Name: Use filename
Select one of the photos and open in with Preview.
Tools menu > Show Inspector
Under the second button choose IPTC and it is all there.
Sorry for all the confusion.
:^P

Enormous Unwanted Gray Lines and Spaces Between Pages?

Does anyone know how to get rid of those **** things? what happened to the thin, little dotted line that separate pages and kept everything tight & together?

what happened to the thin, little dotted line that separate pages and kept everything tight & together?
You are working within an object-oriented page description model. What you see on the display is the design space you defined in Page Setup. You then draw frames in this design space for area composition and area separation, and either save out the design space into the Portable Document Format or rasterize it to a PostScript or Printer Control Language device.
In other words, the metaphor is pages displayed to a desired size the way physical paper that has been trimmed to a desired size. If you don't understand a word of this, then keep in mind that the Mac is the oldest platform for professional publishing. In order to make the most of your Mac, you may want to understand a bit of what is common knowledge in professional publishing.
I can see why a metaphor of continuous form feed paper could be used in a continuous column wordprocessor. But it makes no sense in an application like Pages that lets you define any size design space and populate this space with columns in any position, the way one can in professional publishing.
/hh

Reduce File Size and Optimise PDF both increase file size

Hi All
I have exported a pdf (our college mag) at smallest file size from Indesign CS4 for online use. The problem is the resultant file size is a little under 19Mb. Using both or either Reduce File Size or Optimise functions simply result in an increase to 22Mb. The document is packed with images however I would have thought one or both of these processes would have helped reduce the file size to a more manageable download file size.
A pdf is also produced to go to print so simply compressing all images prior to imcuding them in Indesign is not a preferable option - this would mean creating two separate Indesign documents, something which I would rather avoid if possible.
Any help would be greatly appreciated as always.
The file reside here if anyone cares to take a look http://www.ayrcoll.ac.uk/index.php?name=UpDownload&req=viewdownload&cid=11&orderby=dateD It's the latest release (September 09)
Thanks
Colin

You might want to do an audit of the PDF (button in PDF Optimizer) and try to figure out what the various parts are. It shows 58% is content streams (sorry, but I am not sure what that is), 26% is overhead, and only 12.7% is graphics. Since you are not storing bookmarks and such, you might want to try going back to ID and printing to the Adobe PDF printer for a comparison. It may be one technique is more efficient than the other.
When I used the optimizer, the file did get larger. When I used Reduce File Size, it got slightly smaller. The key may be in figuring out what the various parts are from the audit. You might try copying one page of ID to a new document and play with various versions - different fonts (all were embedded and that is probably best), variations on graphics, etc. That is all I can suggest since I would simply be playing with different ways to produce the document and looking at what is causing the bloat. When the Images are only 12.7% and the fonts less than 1%, there is something going on to produce the size, and those 2 are typically the killers. I would mention tags that tend to bloat, but you do not have any (normally used for assessibility).
You might want to try some of the preflight checks to find issues. I did the transparency check and got 170 instances in 22 pages. Flattening the page may help. There were some pages that seemed to be very bad. However, I did not get a big file size reduction. I did not get a lot of improvement by printing to a new PDF either. Certain pages seem to be part of the bloat problem. The print took a long time around pages 11 and 22.
One troubleshooting technique would be extract pages to separate files and look at the details of each page to see what is causing the issue.
Need to go. Good luck.

What is Field services and examples of field services in SAP

Please can u tell me what is meant by field service in SAP and what are field services available in SAP.
Best Regards
KishoreKumar.T

Hi,
I'm not sure if that's what you mean but have a look <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ef24234254e94ebdd35a83b3bf20f3/content.htm">here</a>
Roy

Reducing PNG size and downloading AAC files .

Are there any tools available to reduce the size of PNG Image and is there any site from which i can download AAC Files.

[url http://advsys.net/ken/utils.htm]PNGOut and [url http://pmt.sourceforge.net/pngcrush/]PNGCrush

Reduce field size and space between fields

Similar Messages

Maybe you are looking for