Refer classes of Microsoft.Office.Policy dll in Custom web service sharepoint

Hi ,
I have created a custom web service which refers to Microsoft.Sharepoint dll and Microsoft.Office.Policy dll.
Added reference tags to these two assemblies in disco file
deployed this web service to _vti_bin.
An error occurred during the compilation of the requested file, or one of its dependencies. The type or namespace name 'RecordsManagement' does not exist in the namespace
'Microsoft.Office' (are you missing an assembly reference?)
This dll is already in present in GAC not sure where else should we be copying this dll to?
Regards,
Harika
harika kakkireni

Hi,
Please try to remove the reference of the Microsoft.Office.Policy.dll then add reference it again and rebuild you project.
Also try to enable “In-Place Records Management” site collection feature.
More information:
http://techtrainingnotes.blogspot.com/2010/01/sharepoint-2010-assemblies-and.html
http://msmvps.com/blogs/windsor/archive/2011/11/04/walkthrough-creating-a-custom-asp-net-asmx-web-service-in-sharepoint-2010.aspx
Best Regards
Dennis Guo
TechNet Community Support

Similar Messages

Microsoft office documents opens as read only in sharepoint 2010

Hi all,
We are facing strange issue with editing microsoft office documents in sharepoint. When we open the documents for editing it opens as read only and when we try to save the file it displays message as could not save the file the document is read
only..
Can anyone help to resolve this issue..

Hi Manjunath,
Did the
dialog of "How would you like to open this file:Read only/Edit" popup when click the Word document?
Please also check if it is related to Site collection Quota exceeding the allocated limit per this similar post,
http://sharepoint.stackexchange.com/questions/29689/sharepoint-2010-opens-document-in-read-only-mode
Thanks
Daniel Yang
TechNet Community Support

Cannot attach a WS-Policy to Jax-RPC Web Service

I am having trouble trying to associate a WS-Security Policy with a BEA Jax-RPC Web Service?
I am following the following procedure to try to associate a the policy:
http://edocs.bea.com/wls/docs100/ConsoleHelp/taskhelp/webservices/ConfigureWSPolicyFile.html
The problem is that when I navigate on the Administration Console to
Deployments
=> AdapterAdminService (this is the name of my application)
=> com.gateway.admin.wsdl.v10.AdminImpl (this is the name of my Web Service)
=> Configuration
=> WS-Policy
The Web console displays a stacktrace mentioning an "IndexOutOfBoundsException" :
Error opening /jsp/webservice/WebServiceConfigurationWebServicePoliciesForm.jsp.
The source of this error is java.lang.IllegalArgumentException: The property you provided 'contents' of form 'deploymentPlanForm' must not be set to null. at com.bea.console.taglib.html.TableTag.registerDataSet(TableTag.java:1588) at com.bea.console.taglib.html.TreeTableTag.doRegisterDataSet(TreeTableTag.java:49) at com.bea.console.taglib.html.TableTag.doStartTag(TableTag.java:1360) at jsp_servlet._jsp._webservice.__webserviceconfigurationwebservicepoliciesform._jsp__tag9(__webserviceconfigurationwebservicepoliciesform.java:498) at jsp_servlet._jsp._webservice.__webserviceconfigurationwebservicepoliciesform._jsp__tag8(__webserviceconfigurationwebservicepoliciesform.java:459) at jsp_servlet._jsp._webservice.__webserviceconfigurationwebservicepoliciesform._jsp__tag7(__webserviceconfigurationwebservicepoliciesform.java:416) at jsp_servlet._jsp._webservice.__webserviceconfigurationwebservicepoliciesform._jspService(__webserviceconfigurationwebservicepoliciesform.java:265) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at org.apache.beehive.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:119) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:551) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:363) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:483) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:375) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:341) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:332) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:306) at com.bea.netuix.nf.UIControl.render(UIControl.java:578) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:482) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62) at jsp_servlet._framework._skeletons._default.__gridlayout._jspService(__gridlayout.java:285) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454) at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:123) at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72) at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65) at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:479) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518) at
I have this issue with both IE7 and Firefox 2. My domain is a WLS 10.0MP1 domain and is deployed on my Windows XP laptop.
I am generating the WS from WSDL with the following ant command:
          <wsdlc srcWsdl="${wsdl.location.path}/AdapterAdministration.wsdl"
               destJwsDir="${gen.compiled.wsdl.dir}"
               packagename="com.gateway.admin.wsdl.v10.server"
               destImplDir="server_impl_example" />
then
               <jwsc     srcdir="${src.dir}" destdir="${dist.dir}" classpathref="project.class.path" debug="true">
                         <jws file="com/gateway/admin/wsdl/v10/AdminImpl.java"
                              compiledWsdl="${gen.compiled.wsdl.dir}/AdapterAdministration_wsdl.jar" />
                    </jwsc>
and finally, I deploy it with:
          <wldeploy action="deploy"
               name="AdapterAdminService"
               source="${dist.dir}/AdminImpl.war"
               user="${wls.domain.user}"
               password="${wls.domain.pwd}"
               verbose="true"
               stage="no"
               upload="true"
               adminurl="t3://${wls.domain.host}:${wls.domain.port}"
               targets="${wls.domain.servername}" />
Do you have any idea what might be wrong here?
Thanks in advance,
Svend

Hi all,
Some more information: I have created another very simple Jax-RPC Web Service, now using the @Policy annotation. The policy I specify is then correctly taken into account, but I still have the same symptom when I navigate to the Configuration => WS-Policy page on the Web Console (i.e., I cannot associate a WS-Policy to my WS with the Web Console)
Beginning of the JWS file:
@WebService(...)
@WLHttpTransport(serviceUri = "", portName = "AdapterAdmin")
@Binding(Binding.Type.SOAP12)
@Policy(uri="Wssp1.2-Http-UsernameToken-Digest.xml")
public class AdminImpl implements Admin {
Ant task I use to build and deploy the service:
<target name="build-service" depends="prepare">
          <mkdir dir="package"/>
          <mkdir dir="package/WEB-INF"/>
          <mkdir dir="package/WEB-INF/lib"/>
          <jwsc
               srcdir="${src.dir}"
               destdir="package"
               classpathref="project.class.path"
               debug="true">
               <jws
                    file="com/gateway/admin/wsdl/v10/AdminImpl.java"
                    contextpath="/AdminImpl2"
                    explode="true"
               />
          </jwsc>
          <move todir="package/WEB-INF">
               <fileset dir="package/com/gateway/admin/wsdl/v10/AdminImpl/WEB-INF"></fileset>
          </move>
          <move todir="package/META-INF">
               <fileset dir="package/xsize/gateway/admin/wsdl/v10/AdminImpl/META-INF"></fileset>
          </move>
          <copy todir="package/WEB-INF/lib">
               <fileset dir="${lib.dir}"
                              includes="client-1.0.jar,
                                   tools.jar />
          </copy>
          <delete dir="package/com" />
          <jar destfile="${dist.dir}/simpleWS2.war" >
               <fileset dir="package" />
          </jar>
          <wldeploy action="deploy"
               name="AdminService-withPolicyAnnotation"
               source="${dist.dir}/simpleWS2.war"
               user="weblogic"
               password="weblogic"
               verbose="true"
               stage="no"
               upload="true"
               adminurl="t3://localhost:9001"
               targets="AdminServer" />
     </target>
"

Deploying a VB dll using some web service and accessing it through java

I'm new to Web Services Based Programming. I would like to know whether this is possible and if so has anyone tried it. I want to create a vb dll that contains the remote methods that the client will access from a java program. After going thru a lot of articles, I'm still unsure on how to do this. I found one method was to Create a VB program/dll, deploy it in a web service and create the java program that accesses by another web service.
I'm doing this as part of my lab syllabus. The thing is My lab exercises do not state anything about the technologies that I can use to do this.
This is all that is stated there:-
Creation Of DLL Using VB And Deploy it in Java
I just cant get any ideas other than deploying both the parts as web services. If anyone has Better ideas for this, I would really appreciate it.
I dont know anything about CORBA for languages other than Java and I'm already using the servlets and EJB's in my normal life. I'm also learning the ORB based programming in java. Therefore your help will probably help me learn something new then what I know.

Sorry I wasn't too specific in my last question.
This is my java class calling the native method print
//HeyWorld.java
class HeyWorld {
private native void print();
public static void main(String[] args) {
new HeyWorld().print();
static {
System.loadLibrary("HeyWorld");
In this case, my C method for calling a C++ method: HelloWorld.cpp
#include "jni.h"
#include "stdio.h"
#include "stdafx.h"
#Include "HeyWorld.h" //this is where i get my function prototype
#include "Test.h" //this is the C++ header where the print method and the Test class is
JNIEXPORT void JNICALL
Java_HeyWorld_print(JNIEnv *env, jobject obj)
CTest a; //CTest is the print class I created
a.print();
//This is the header for Test.h
class CTest: public CWinApp
public:
     CTest(); //constructor
     void print(); //our method
//And this is the implementation of the class Test.cpp
void CTest::print()
     printf("Hey World!\n");
     return ;
I could compile the Test.cpp, HeyWorld.cpp successfully. However when I tried to compile HeyWorld.cpp using
cl -I<path of jdk include> -I<path of jdk include win32> -LD HeyWorld.cpp -FeHeyWorld.dll,
the VC++ 6.0 compiler gave me this error:
HeyWorld.obj:error LNK2001: unresolved external symbol "public:_thiscall CTest::CTest(void)"
HeyWorld.obj:error LNK2001: unresolved external symbol "public:_thiscall CTest::print(void)"
Thanks for the help.

Using SAML policy while invoking a web service

I have to invoke a webservice which is secured using the policy wss10_saml_token_client_policy.
In order to achieve the above i have creates a stub using JAX-WS and while invoking the web service I pass the policy as a SecurityFeature.Code snippet given below:
SecurityPolicyFeature[] securityFeatures = new SecurityPolicyFeature[] { new SecurityPolicyFeature(
getValueFromPropertyFile("oracle/wss10_saml_token_client_policy"))};
SomeStub stub =(UserManagementPortTypev1_0)SomeService.getPort("...","....",securityFeatures );
Once deployed in weblogic and when i invoke the service, the soap request formed is correct. It creates for me the soap header with the correct security nodes. The header formed is like below:
<S:Header>
<work:WorkContext xmlns:work="http://oracle.com/weblogic/soap/workarea/">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</work:WorkContext>
<wsse:Security S:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<saml:Assertion AssertionID="SAML-L0r20MS5CV0y7B6zHnGX5w22" IssueInstant="2011-05-10T05:03:49Z" Issuer="www.oracle.com" MajorVersion="1" MinorVersion="1" xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion">
<saml:Conditions NotBefore="2011-05-10T05:03:49Z" NotOnOrAfter="2011-05-10T05:08:49Z"/>
<saml:AuthenticationStatement AuthenticationInstant="2011-05-10T05:03:49Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">
<saml:Subject>
*<saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">anonymous</saml:NameIdentifier>* <saml:SubjectConfirmation>
<saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:sender-vouches</saml:ConfirmationMethod>
</saml:SubjectConfirmation>
</saml:Subject>
</saml:AuthenticationStatement>
</saml:Assertion>
</wsse:Security>
</S:Header>
The node NameIdentifier is supposed to be populated with the logged in user id, which will be picked up from JAAS principal.
Now I am invoking the service hosted in weblogic from outside using JSON protocol, I do not have a portal ready to invoke the service.
My question is, is there any way in which i can replicate/ simulate the JAAS principal such that the nameidentifier is populated even when invoked from outside. THis is a requirement from testing perspective.

Hi,
Thanx it is working now.
BTW can you give me some urls with info of this kind of setting which i need to do for other kind of integarions in J2EE platform.Sorry if i am asking too much as i am a starter in this technology.

Class DbwsProxy does not exist when connecting to WEB SERVICE

Hi,
I am trying to connect to the OC4J sample web service using the Oracle supplied method specified in this document.
http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm
We of course use a 10g DB.
The DBWS Callout Utilities were successfully installed by our systems team.
When I run the sample script for the PL/SQL Dynamic Invocation Interface (DII)
I get this error:
ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist
ORA-06512: at "SYS.UTL_DBWS", line 178
ORA-06512: at "ABS.CHANNA_TEST_PLSQL_DII", line 14
ORA-06512: at line 1
Why is this??
Any help would be grately appreciated?
Is there any grans/permissions we have to give?
Thanks & Regards,
Channa.

Be certain to "propagate permissions" for the shared volume. Under Manage Devices, look for hardware, "Server" then the tab on the right, storage, gear icon at bottom.
This will change the permissions for all files, folders and sub folders.

Use Machine Translation with Microsoft.Office.TranslationServices

I have implemented custom translation for translate Text to another language and it works properly. Here I used "Microsoft.Office.TranslationServices.dll" and used its classes.
I have a scenario like this. Lets say I do not want to translate a selected words such as "Work Order". So there I've got a dictionary with the language and word. (Multidimensional Dictionary). So I want to pass that dictionary to the service and
need to map the words I've mapped there. Is it possible to do so using this "Microsoft.Office.TranslationServices"?

I am wondering if this has anything to do with having the user log into Excel.
In point #5 above: Under DCOM config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other
users can't run the excel application on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Because running with the launching user proposes an user to run the Excel application. However, I do not think there is any where that we can pass in the password for this user to Excel. However, this Excel has all the permissions to Excel application as
well as the folders that have the Excel files.
Please help!
Thank you!

Is it possible to easily run Microsoft office 2010 with access on a MacBook pro or have I wasted my money ?

Okay , first off thanks for any help in advance . I just purchased a MacBook pro for my daughter for college . ( finance major ) . Her class requires Microsoft office 2010 with access . As you probably already know , and I have just learned , that is no offered for Mac. Is there an easy way To run ms office with access on a MacBook pro or have I wasted my money ?

All that matters is file compatibility. The documents look the same. I've been a professor, so I don't see any issues here at all.
Another option you may want to consider is this: Run Windows on the Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Microsoft Office Document Imaging

I upgraded Office 2007 to 2010 and found out that I am no longer able to view/print any of my multi-page tiff documents scanned with standard Mircrosoft MODI 2007. The old MODI libraries were removed by the installer and the new office version seems not to have such option in the Shared Tools.
Will MODI be included in the final version of the office 2010?
Thanks

Hello Everyone,
Please see this resolution:
How to install MODI by installing SharePoint Designer 2007
Another way to install Microsoft Office Document Imaging for use with Microsoft Office 2010 is to install Microsoft Office SharePoint Designer 2007. SharePoint
Designer 2007 is provided as a free download from the Microsoft website. Microsoft Office Document Imaging is included with the SharePoint Designer 2007 installation package as part of the Office Tools.
To install SharePoint Designer 2007, visit the following Microsoft website:
http://www.microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=baa3ad86-bfc1-4bd4-9812-d9e710d44f42
How to include MODI in a SharePoint Designer 2007 installation
1.
Run the SharePointDesigner.exe from the link in the article. Or, download this file, and then double-click it.
2.
Review and then accept the software license.
3.
Click
Customize to open the installation options.
4.
Expand the
Office Tools tree to see the Microsoft Office Document Imaging
option.
5.
Click the down arrow for the
Microsoft Office Document Imaging option, and then select
Run all from My Computer to include all of MODI in the SharePoint Designer installation.
6.
Click
Install Now.
Enterprise customers who are installing SharePoint Designer 2007 do not have to worry about licensing.
The MSOCache footprint is much smaller than that of the Office 2007 suite, which ranges from 500 MB to 900 MB, depending on SKU. The SharePoint Designer footprint is about 209 MB.
How to use the Office Customization Tool to make sure that only MODI is installed
To test SharePoint Designer and to use the OCT to lock down where no one can install the SP designer part of the software, follow these steps:
1.
Download the SharePoint Designer 2007. To do this, visit the following Microsoft website:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=BAA3AD86-BFC1-4BD4-9812-D9E710D44F42&displaylang=en
By doing this, you may create an Office customization tool (OCT). You must download the main .exe file, SharePointDesigner.exe, and then extract the files by using the command line. For example:
\\Servername\ShareName\SharePointDesigner2007_download\SharePointDesigner.exe
/extract:\\servername\sharename\
This extracts the Setup.exe file, the Admin folder, and so on. After you do this, run the following to create the customizations:
\\Servername\ShareName\SharePointDesigner2007\setup.exe
/admin
Within the OCT, go to Set feature installations state, and set everything except the MODI to
not available.
2.
If SharePoint is used in your environment, only installing MODI files, Owssup.dll and MSO.dll can be affected by this custom installation. To prevent this, you need to unregister
Name.dll. To do this, run the following command at a command line:
msiexec /I {90120000-0017-0000-0000-0000000FF1CE} REMOVE=IMNFiles /qn /L*V C:\temp\loggingremoval.txt
This posting is provided "AS IS" with no warranties, and confers no rights

I had Microsoft Office installed in my Macbook Air by one of the technicians in the store, it was working fine the first week but after that it started popping a notice saying it cannot verify my suscription online and now I cannot open any documents?

I just bought a Macbook Air almost a month now. When I bought it, the technician installed Microsoft Office 365 as they were having a promotion at the time. However after a week of using it, it started popping up a notice saying that it cannot verify Microsoft Office. I still managed to open the word document but as of today, it will not open. I took it to the Mac store last week, and they said that there was nothing wrong with it and they could not figure out any problem.
I don't know what to do and I am in desperate need of help. I cannot open my documents at all and I have my research paper that I need to finish writing. This is very disappointing and extremely stressful for me. If anyone has any suggestions of how this can be fixed, please let me know. I do not want to lose my hard work =(

Microsoft Office 365 is a subscription - based service. You have to pay for it... and keep paying for it... and paying for it... as in 365 days a year... or lose your hard work.
Office Home Premium is a mere $10 a month, but a convenient annual subscription is only $100 a year. This is a substantial discount to Microsoft's Office 365 business products ($150 / employee / year).
Such a deal! Are you not absolutely thrilled?
Here are some slightly more reasonable alternatives, all of which are compatible with their Office equivalents:
LibreOffice (donation-supported)
NeoOffice ($10 but older version is free if you can find it)
OpenOffice (completely free)
Numbers ($19.99)
Pages ($19.99)

On new MacPro with Microsoft Office, two email accounts (same server) yet one is fine the other dumps 35,000 emails into inbox. Apple consultants no help. How do I get the 35000 email account fixed?

On new MacPro with Microsoft Office. Two email accounts, same service provider and server, yet one email account is fine and the other dumped the entire server of 35,000 emails into inbox. Need to keep server load for business, but how can emulating server on one account be fixed?

You should clean up your inbox on the server. Log into the account's web interface and move the 35,000 emails out of the inbox into another folder. Why do you need to keep 35,000 emails in the inbox? An email client like OutLook etc. using POP protocol downloads all the inbox emails to your computer.

Calling helper class that refrence to WCF web service

Hi I have a BizTalk projects that calls a helper class. now the helper class receive the message and a counter and is suppose via the class to create a login to a WCF
web service and then synchronize the message to this WCF web service.<o:p></o:p>
this is class:<o:p></o:p>
public static string SyncConcerto(XLANGMessage msg, int count)
SelectResponse select = (SelectResponse)msg[0].RetrieveAs(typeof(SelectResponse));
ConcertoService.ExternalMappingServiceClient concertoServ = new ConcertoService.ExternalMappingServiceClient();
ConcertoService.ExternalMappingItem extMapItem = new ConcertoService.ExternalMappingItem();
ConcertoService.ExternalMappingServiceResponse extLogonResp = new ConcertoService.ExternalMappingServiceResponse();
ConcertoService.ExternalMappingServiceResponse extSyncResp = new ConcertoService.ExternalMappingServiceResponse();
extLogonResp = concertoServ.Logon("*****", "******", true);
if (extLogonResp.StatusCode == 1)
if (count>0)
for (int i = 0; i < count; i++)
extMapItem.Attribute1 = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.REGION_NAME;
extMapItem.Attribute2 = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.PROJECT_NUMBER;
extMapItem.Attribute3 = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.PRODUCT_NAME;
extMapItem.ProjectName = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.PROJECT_NAME;
extMapItem.ProjectMgr = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.PM_NAME;
//extMapItem.ProjectMgr = select.SelectResult.CNS_CONCERTO_PROJECTSRECORDSELECT.PM_NAME;
extMapItem.Division = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.DIVISION_NAME;
extMapItem.Subject = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.CUSTOMER_NAME;
extMapItemArr[i] = extMapItem;
extSyncResp = concertoServ.SynchronizeExternalAttributeData(extMapItemArr);
if (extSyncResp.StatusCode == 1)
return "sync success login success";
else
return "success login sync faild";
else if (extLogonResp.StatusCode == 2)
return "TimeOut";
return "Failed";
Now it keeps throwing exception in this line of code: ConcertoService.ExternalMappingServiceClient concertoServ = new ConcertoService.ExternalMappingServiceClient();
saying he needs a valid endpoint. but he has the app.config file already that stats his endpoint.
What am I doing wrong, since I have never done a thing like that before.
And also I can't use the WCF web service in the normal BIZTALK way due to login operation he needs to do. <o:p></o:p>
Any advice on how to continue?<o:p></o:p>

the WCF has a logon operation where I enter a user name and password, it doesn't return a session key meaning I can't send a message to the WCF WS (Biztalk is stateless) that doe's the logon operation and the synchronize operation. so I had to do it with
the helper class.
and Morten I know this is very bad practice but I don't have choice for now.
Morten another question since we are using Biztalk 2013 (New Enviroment) our BTSNTSvc.exe.config is empty:
<?xml version="1.0" ?>
<configuration>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0" />
</startup>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<probing privatePath="BizTalk Assemblies;Developer Tools;Tracking;Tracking\interop" />
</assemblyBinding>
</runtime>
<system.runtime.remoting>
<channelSinkProviders>
<serverProviders>
<provider id="sspi" type="Microsoft.BizTalk.XLANGs.BTXEngine.SecurityServerChannelSinkProvider,Microsoft.XLANGs.BizTalk.Engine" securityPackage="ntlm" authenticationLevel="packetPrivacy" />
</serverProviders>
</channelSinkProviders>
<application>
<channels>
<channel ref="tcp" port="0" name="">
<serverProviders>
<provider ref="sspi" />
<formatter ref="binary" typeFilterLevel="Full"/>
</serverProviders>
</channel>
</channels>
</application>
</system.runtime.remoting>
</configuration>
where do I insert my end point and how?

RMI exception calling web service from proxy class

I am getting the following error attempting to call a web service from a proxy. It appears to relate to the type of objects I am trying to send vs the type that is expected. Following the exception I am adding a copy of the control where calling the web service is sucessful, a copy of the proxy class that I am using to make this unsucessful call, and the controller.jpf that has the formBean where I am creating my objects
Caught Exception Calling the Web Service from the Proxy. The Exception is the f
ollowing: java.rmi.RemoteException: web service invoke failed: javax.xml.soap.SO
APException: failed to serialize class org.openuri.www.CreateAccountCheckingReq
uestweblogic.xml.schema.binding.SerializationException: type mapping lookup fail
ure on class=class controls.CheckingService$anyType TypeMapping=TYPEMAPPING SIZE
=5
ENTRY 1:
class: org.openuri.www.CreateAccountCheckingResponse
xsd_type: ['http://www.openuri.org/']:lcl0:CreateAccountCheckingResponse
ser: org.openuri.www.CreateAccountCheckingResponseCodec@c0f4da
deser: org.openuri.www.CreateAccountCheckingResponseCodec@b1dd4
ENTRY 2:
class: org.openuri.www.FundingInfoAnonType
xsd_type: ['http://www.openuri.org/']:lcl0:FundingInfoAnonType
ser: org.openuri.www.FundingInfoAnonTypeCodec@1d36711
deser: org.openuri.www.FundingInfoAnonTypeCodec@13a59e
ENTRY 3:
class: org.openuri.www.AccountInfoAnonType
xsd_type: ['http://www.openuri.org/']:lcl0:AccountInfoAnonType
ser: org.openuri.www.AccountInfoAnonTypeCodec@1de5959
deser: org.openuri.www.AccountInfoAnonTypeCodec@bbf788
ENTRY 4:
class: org.openuri.www.CustomerInfoAnonType
xsd_type: ['http://www.openuri.org/']:lcl0:CustomerInfoAnonType
ser: org.openuri.www.CustomerInfoAnonTypeCodec@7824f9
deser: org.openuri.www.CustomerInfoAnonTypeCodec@1c35fe1
ENTRY 5:
class: org.openuri.www.CreateAccountCheckingRequest
xsd_type: ['http://www.openuri.org/']:lcl0:CreateAccountCheckingRequest
ser: org.openuri.www.CreateAccountCheckingRequestCodec@1cbcd7b
deser: org.openuri.www.CreateAccountCheckingRequestCodec@11f60ce
; nested exception is:
javax.xml.soap.SOAPException: failed to serialize class org.openuri.www
.CreateAccountCheckingRequestweblogic.xml.schema.binding.SerializationException:
type mapping lookup failure on class=class controls.CheckingService$anyType Typ
eMapping=TYPEMAPPING SIZE=5
ENTRY 1:
class: org.openuri.www.CreateAccountCheckingResponse
xsd_type: ['http://www.openuri.org/']:lcl0:CreateAccountCheckingResponse
ser: org.openuri.www.CreateAccountCheckingResponseCodec@c0f4da
deser: org.openuri.www.CreateAccountCheckingResponseCodec@b1dd4
ENTRY 2:
class: org.openuri.www.FundingInfoAnonType
xsd_type: ['http://www.openuri.org/']:lcl0:FundingInfoAnonType
ser: org.openuri.www.FundingInfoAnonTypeCodec@1d36711
deser: org.openuri.www.FundingInfoAnonTypeCodec@13a59e
ENTRY 3:
class: org.openuri.www.AccountInfoAnonType
xsd_type: ['http://www.openuri.org/']:lcl0:AccountInfoAnonType
ser: org.openuri.www.AccountInfoAnonTypeCodec@1de5959
deser: org.openuri.www.AccountInfoAnonTypeCodec@bbf788
ENTRY 4:
class: org.openuri.www.CustomerInfoAnonType
xsd_type: ['http://www.openuri.org/']:lcl0:CustomerInfoAnonType
ser: org.openuri.www.CustomerInfoAnonTypeCodec@7824f9
deser: org.openuri.www.CustomerInfoAnonTypeCodec@1c35fe1
ENTRY 5:
class: org.openuri.www.CreateAccountCheckingRequest
xsd_type: ['http://www.openuri.org/']:lcl0:CreateAccountCheckingRequest
ser: org.openuri.www.CreateAccountCheckingRequestCodec@1cbcd7b
deser: org.openuri.www.CreateAccountCheckingRequestCodec@11f60ce
Java Control for the web service:
package controls;
import weblogic.webservice.context.WebServiceContext;
* @jc:location http-url="http://localhost:7001/Checking.jws"
* @jc:wsdl file="#CheckingWsdl"
* @jc:handler callback="MessageHandler" operation="MessageHandler"
public interface CheckingService extends com.bea.control.ControlExtension, com.bea.control.ServiceControl
public static class CustomerInfo
implements java.io.Serializable
public java.lang.String FirstName;
public java.lang.String LastName;
public java.lang.String MiddleName;
public int SSN;
public int CustomerNumber;
public java.util.Calendar CreationDate;
public java.util.Calendar LastModifiedDate;
public static class FundingInfo
implements java.io.Serializable
public float Amount;
public java.util.Calendar CurrentDate;
public int AccountNumber;
public static class anyType
implements java.io.Serializable
public com.bea.xml.XmlObject[] t;
public static class AccountInfo
implements java.io.Serializable
public int AccountNumber;
public float Balance;
public int CustomerNumber;
public java.util.Calendar LastModifiedDate;
public WebServiceContext context = CheckingService.context;
* @jc:protocol form-post="false" form-get="false"
public AccountInfo CreateAccountChecking (CustomerInfo CustomerInfo, FundingInfo FundingInfo, anyType CommonHeader);
static final long serialVersionUID = 1L;
/** @common:define name="CheckingWsdl" value::
<?xml version="1.0" encoding="utf-8"?>

<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:conv="http://www.openuri.org/2002/04/soap/conversation/" xmlns:cw="http://www.openuri.org/2002/04/wsdl/conversation/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:jms="http://www.openuri.org/2002/04/wsdl/jms/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.openuri.org/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.openuri.org/">
<types>
<s:schema targetNamespace="http://www.openuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema">
<s:element name="CreateAccountCheckingRequest">
<s:complexType>
<s:sequence>
<s:element name="CustomerInfo">
<s:complexType>
<s:sequence>
<s:element name="FirstName" type="s:string" nillable="false"/>
<s:element name="LastName" type="s:string" nillable="false"/>
<s:element name="MiddleName" type="s:string" nillable="true"/>
<s:element name="SSN" type="s:int"/>
<s:element name="CustomerNumber" type="s:int"/>
<s:element name="CreationDate" type="s:dateTime"/>
<s:element name="LastModifiedDate" type="s:dateTime"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="FundingInfo">
<s:complexType>
<s:sequence>
<s:element name="Amount" type="s:float"/>
<s:element name="CurrentDate" type="s:dateTime"/>
<s:element name="AccountNumber" type="s:int"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="CommonHeader" type="s:anyType"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="CreateAccountCheckingResponse">
<s:complexType>
<s:sequence>
<s:element name="AccountInfo">
<s:complexType>
<s:sequence>
<s:element name="AccountNumber" type="s:int"/>
     <s:element name="Balance" type="s:float"/>
     <s:element name="CustomerNumber" type="s:int"/>
     <s:element name="LastModifiedDate" type="s:dateTime"/>
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="string" nillable="true" type="s:string"/>
</s:schema>
</types>
<message name="CreateAccountCheckingSoapIn">
<part name="parameters" element="s0:CreateAccountCheckingRequest"/>
</message>
<message name="CreateAccountCheckingSoapOut">
<part name="parameters" element="s0:CreateAccountCheckingResponse"/>
</message>
<portType name="CheckingSoap">
<operation name="CreateAccountChecking">
<input message="s0:CreateAccountCheckingSoapIn"/>
<output message="s0:CreateAccountCheckingSoapOut"/>
</operation>
</portType>
<binding name="CheckingSoap" type="s0:CheckingSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="CreateAccountChecking">
<soap:operation soapAction="http://www.openuri.org/CreateAccountChecking" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="Checking">
<port name="CheckingSoap" binding="s0:CheckingSoap">
<soap:address location="http://localhost:7001/Checking.jws"/>
</port>
</service>
</definitions>
FOLLOWING IS THE PROXY CLASS THAT IS UNSUCCESSFUL
import controls.CheckingService.anyType;
import java.util.ArrayList;
import java.util.List;
import javax.xml.namespace.QName;
import javax.xml.rpc.handler.HandlerInfo;
import javax.xml.rpc.handler.HandlerRegistry;
import org.openuri.CreateAccountCheckingResponseDocument.CreateAccountCheckingResponse;
import org.openuri.www.CustomerInfoAnonType;
import org.openuri.www.FundingInfoAnonType;
import weblogic.jws.proxies.*;
import weblogic.webservice.context.WebServiceContext;
import weblogic.webservice.context.WebServiceSession;
import weblogic.webservice.core.handler.WSSEClientHandler;
import weblogic.webservice.tools.pagegen.result;
import weblogic.xml.security.UserInfo;
import weblogic.xml.security.wsse.Security;
import weblogic.xml.security.wsse.SecurityElementFactory;
//import weblogic.jws.proxies.WebServiceB;
//import weblogic.jws.proxies.WebServiceB_Impl;
//import weblogic.jws.proxies.WebServiceBSoap;
public class CheckingWSProxy
public static void CallWS(Controller.CreateAccountCheckingForm form)
String user;
String pass;
try{
* Instantiate the main proxy class. The proxy class has the same name as the
* web service, with "_Impl" appended.
Checking myservice = new Checking_Impl("http://localhost:7001/ConsumerAccountApp/schemas/CheckingService.wsdl");
WebServiceContext context = myservice.context();
WebServiceSession session = context.getSession();
* Registers a handler for the SOAP message traffic.
HandlerRegistry registry = myservice.getHandlerRegistry();
List list = new ArrayList();
list.add(new HandlerInfo(WSSEClientHandler.class, null, null));
registry.setHandlerChain(new QName("Checking"), list);
* Set the username and password token for SOAP message sent from the client, through
* the proxy, to the web service.
user = form.getUsername();
pass = form.getPassword();
UserInfo ui = new UserInfo(user, pass);
session.setAttribute(WSSEClientHandler.REQUEST_USERINFO, ui);
* Adds the username / password token to the SOAP header.
SecurityElementFactory factory = SecurityElementFactory.getDefaultFactory();
Security security = factory.createSecurity(null);
security.addToken(ui);
session.setAttribute(WSSEClientHandler.REQUEST_SECURITY, security);
* Get the protocol-specific proxy class.
CheckingSoap msg=myservice.getCheckingSoap();
* Invoke the web service method
msg.createAccountChecking((CustomerInfoAnonType)form.getProxyCustomerInfo(), (FundingInfoAnonType)form.getProxyFundingInfo(), (Object)form.get_CommonHeader());
catch (Exception ex)
System.out.println("Caught Exception Calling the Web Service from the Proxy. The Exception is the following: " + ex.toString());
FOLLOWING IS THE FORMBEAN IN THE CONTROLLER.JPF FILE
* FormData get and set methods may be overwritten by the Form Bean editor.
public static class CreateAccountCheckingForm extends FormData
private anyType _CommonHeader;
private controls.CheckingService.FundingInfo _FundingInfo;
private controls.CheckingService.CustomerInfo _CustomerInfo;
private java.util.Date dOut;
private java.util.Calendar cOut;
private CustomerInfo proxyCustomerInfo;
private FundingInfo proxyFundingInfo;
private String stringDate;
private String currentDate;
private String lastModifiedDate;
private String creationDate;
private String systemMessage;
private String username;
private String password;
private String accountType;
private String trashTransferAccount;
private String trashAccountNumber;
private boolean secureFlag;
public void set_CustomerInfo(controls.CheckingService.CustomerInfo _CustomerInfo)
_CustomerInfo.CreationDate = parseDate(getCreationDate());
_CustomerInfo.LastModifiedDate = parseDate(getLastModifiedDate());
this._CustomerInfo = _CustomerInfo;
public controls.CheckingService.CustomerInfo get_CustomerInfo()
if(this._CustomerInfo == null)
this._CustomerInfo = new controls.CheckingService.CustomerInfo();
_CustomerInfo.CreationDate = dateNow();
_CustomerInfo.LastModifiedDate = dateNow();
return this._CustomerInfo;
public CustomerInfo getProxyCustomerInfo()
this.proxyCustomerInfo = (CustomerInfo)this._CustomerInfo;
return this.proxyCustomerInfo;
public void set_FundingInfo(controls.CheckingService.FundingInfo _FundingInfo)
_FundingInfo.CurrentDate = parseDate(getCurrentDate());
this._FundingInfo = _FundingInfo;
public controls.CheckingService.FundingInfo get_FundingInfo()
if(this._FundingInfo == null)
this._FundingInfo = new controls.CheckingService.FundingInfo();
_FundingInfo.CurrentDate = dateNow();
return this._FundingInfo;
public FundingInfo getProxyFundingInfo()
this.proxyFundingInfo = (FundingInfo)this._FundingInfo;
return this.proxyFundingInfo;
public void set_CommonHeader(anyType _CommonHeader)
this._CommonHeader = _CommonHeader;
public anyType get_CommonHeader()
if(this._CommonHeader == null)
this._CommonHeader = new anyType();
return this._CommonHeader;
public java.util.Calendar dateNow()
this.dOut = new Date();
Calendar cOut = this.cOut.getInstance();
cOut.setTime(this.dOut);
this.cOut = cOut;
return this.cOut;
public java.util.Calendar parseDate( String strDate )
SimpleDateFormat df4 = new SimpleDateFormat( "MM/dd/yyyy" );
Calendar cOut = this.cOut;
df4.setLenient( false );
try
this.dOut = df4.parse( strDate );
} catch ( ParseException e )
cOut.getInstance();
cOut.setTime(dOut);
this.cOut = cOut;
return this.cOut;
public void setStringDate( String stringDate )
this.stringDate = stringDate;
public String getStringDate()
return this.stringDate;
public void setCurrentDate( String currentDate )
this.currentDate = currentDate;
public String getCurrentDate()
SimpleDateFormat df4 = new SimpleDateFormat( "MM/dd/yyyy" );
this.currentDate = df4.format(_FundingInfo.CurrentDate.getTime());
return this.currentDate;
public void setLastModifiedDate( String lastModifiedDate )
this.lastModifiedDate = lastModifiedDate;
public String getLastModifiedDate()
SimpleDateFormat df4 = new SimpleDateFormat( "MM/dd/yyyy" );
this.lastModifiedDate = df4.format(_CustomerInfo.LastModifiedDate.getTime());
return this.lastModifiedDate;
public void setCreationDate( String creationDate )
this.creationDate = creationDate;
public String getCreationDate()
SimpleDateFormat df4 = new SimpleDateFormat( "MM/dd/yyyy" );
this.creationDate = df4.format(_CustomerInfo.CreationDate.getTime());
return this.creationDate;
public void setUsername( String username )
this.username = username;
public String getUsername()
return this.username;
public void setPassword( String password )
this.password = password;
public String getPassword()
return this.password;
public void setAccountType( String accountType )
this.accountType = accountType;
public String getAccountType()
return this.accountType;
public void setTrashTransferAccount( String trashTransferAccount )
this.trashTransferAccount = trashTransferAccount;
public String getTrashTransferAccount()
return this.trashTransferAccount;
public void setTrashAccountNumber( String trashAccountNumber )
this.trashAccountNumber = trashAccountNumber;
public String getTrashAccountNumber()
return this.trashAccountNumber;
public void setSystemMessage( String systemMessage )
this.systemMessage = systemMessage;
public String getSystemMessage()
return this.systemMessage;
public void setSecureFlag( boolean secureFlag )
this.secureFlag = secureFlag;
public boolean getSecureFlag()
return this.secureFlag;
}

This exception means that xml namespaces are different.
Etc. soap has xml element which doesn't belong to namespace of parent xml element and namespace is set without prefix.
I had such problem.
Try to set namespace prefix for this element.
Example:
<el1>
<el2 xmlns="http://..."/>
</el1>
Should be
<el1>
<q:el2 xmlns:q="http://..."/>
</el1>

Create web service from java class in Jdeveloper 11g

I have very simple java class which I want to expose as a web service. I am using the Jdeveloper's in-built wizard to "Creat Web Service" from a java class. While doing so when I am selecting a method to be exposed as a web service, I get a error pop-up which says "Failed to load system class."
I am not able to understand the reson for this error. I tried to do this with a very simple java code too but still no luck!!
Here is the code:
public class DownloadFileFromECMWrapper {
public DownloadFileFromECMWrapper() {}
public static void main(String args[]){
DownloadFileFromECMWrapper obj = new DownloadFileFromECMWrapper();
obj.callDownloadFileFromECM("C:\\shivam\\MyFile.txt");
public String callDownloadFileFromECM(String filePath){
System.out.println(filePath);
return filePath;
Can someone please help me on this.
Edited by: 962154 on Sep 28, 2012 2:37 PM

I have very simple java class which I want to expose as a web service. I am using the Jdeveloper's in-built wizard to "Creat Web Service" from a java class. While doing so when I am selecting a method to be exposed as a web service, I get a error pop-up which says "Failed to load system class."
I am not able to understand the reson for this error. I tried to do this with a very simple java code too but still no luck!!
Here is the code:
public class DownloadFileFromECMWrapper {
public DownloadFileFromECMWrapper() {}
public static void main(String args[]){
DownloadFileFromECMWrapper obj = new DownloadFileFromECMWrapper();
obj.callDownloadFileFromECM("C:\\shivam\\MyFile.txt");
public String callDownloadFileFromECM(String filePath){
System.out.println(filePath);
return filePath;
Can someone please help me on this.
Edited by: 962154 on Sep 28, 2012 2:37 PM

How to debug ABAP Web services from Microsoft Visual Studio

When developing .NET based Web services clients using Visual Studio that call Web services in SAP NetWeaver .NET developers would like to be able to debug inside SAP. In my blog <a href="/people/andre.fischer/blog/2007/02/07/how-to-debug-abap-web-services-from-microsoft-visual-studio to debug ABAP Web services from Microsoft Visual Studio</a> I would like to point .NET developers to the fact that SAP NetWeaver offers the option of external debugging to perform this task. Though the steps that have to be performed are described in the SAP Online Help I am sure that this option is not well known amongst the .NET developer community.

Hello WilliamIV,
>>How can I "configure" Visual Studio debugger to allow validation to work?
Since I do not have a VS2012 environment, according to your provided link, I created a test demo with VS2013, however, both ways catch the validation error:
If possible, you could have a try with VS2013 to see if it works or run the example on other machine with VS2012 to see if this is caused by the VS environment, in my side, I do not change any configuration, all are default.
If I misunderstood this issue, please feel free to let me know.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Refer classes of Microsoft.Office.Policy dll in Custom web service sharepoint

Similar Messages

Maybe you are looking for