Refering Cells in webi for calculation

Hi,
We have done calculations separately in multiple reports. Please let me know as to how to refer/use those calculated values across any report, for example, where we could use a sum of a report (sum is assigned to a cell) which could be associated with another reportu2019s calculation. We assigned variables to the result cells and tried to refer those to the desired reports to do calculations independently in each reportu2026 but failed. Please give me a solution to this ASAP.
Regards
Aflal

Hi Aflal,
You are quite limited in the calculations that you can create in the universe. Are the calculations just simple maths (x*y)?
Wherever possible you should try and create these calculations in the BEx query, since this is much more robust. The SP3 version of the manual Wavery mentioned is here: http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_sap_olap_univ_en.pdf
The BEx query designer help is on-line, here: http://help.sap.com/saphelp_nw70/helpdata/en/9d/76563cc368b60fe10000000a114084/frameset.htm

Similar Messages

  • How to use part of a cell for calculation

    Hi,
    I get 4-6 with this formula in cell D5 =IF(ISTEXT(F5),SUM($J$4:J4)+1&"-"&SUM($J$4:J5),"-") 
    and again 4-6 in E5 with this formula  =IF(B4=B5,(SUM($J$4:J4)+1&"-"&SUM($J$4:J5)),(SUM(J4:J4)+1&"-"&SUM(J4:J5))).
    I want to use the number 4 and 6 from D5 and E5 for calculations in other cells, How can I do that ?
    Please help. Is it possible ?
    regards

    Hi Asadulla Javed,
    Actually I want to achieve this.
    1. If there is name in F column then number in G column is counted in D column and if it is number in F then there is - in D column.
    2. When next time it meet condition in column F, it calculates serial from above where - was not.
    3. In E column counts G column irrespective of data in F. But it starts from 1 with a new date in column B.
     I did it with the help of other columns. That disturbs the worksheet calculations and other function. I need to achieve this by formula here in D and E columns.
    If possible,
    Please help here.
    Regards
    dockhem

  • Remove blank cell in Webi Report

    Hi Guys,
    I have one simple ques. how to delete or remove blank cell from Webi Report.
    Regards,
    Manoj

    Mr Manoj,
    We assume that one posts questions that are difficult to find and a little patience in waiting for replies.
    Please see the [Rules of Engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] page for additional information.
    The product guides can be found here,  [http://help.sap.com/businessobject/product_guides]  please select and download the guide you need.
    Thank you!
    Simone Caneparo
    Forum Moderator

  • Hyperlink on Blank Cells in WebI

    Hi,
    I want to enable the hyperlink on the particular column content. There are few cells that remain blank
    Whenever, I enable a hyperlink on that particular column, it gets enable for the cell and however in blank cell it displays the url of the hyperlink.
    I would be really grateful if someone could throw some light on this.
    Regards,
    BOB

    Hi,
    We cannot hide specifc cells in WebI, however we can choose to whether to display or not empty measure values and empty dimension value.
    So you need to select the desired block-> Right Click  and Select Format Table-> Uncheck Show rows with empty dimension values or Show rows with empty measure values whichever is required to be hidden.
    Hope this helps.
    Regards,
    Manpreet

  • Use Date() for calculation

    Dear sir,
    I want to know how to use Date() for calculation.
    For example:
    int rentday = 7;
    today = new Date();
    I want to add today and rentday to get dueday. I've try to use "dueday=today + rentday", but error.
    Pls help!!! Thanks!!!

    Hi "acos3ltd",
    I think, perhaps, that the "java.util.GregorianCalendar" class may be what you require:
    http://java.sun.com/j2se/1.4.1/docs/api/java/util/GregorianCalendar.html
    and this Web page may also be of help:
    http://java.sun.com/people/linden/faq_b2.html#Date
    Hope it helps.
    Good Luck,
    Avi.

  • How to use FORMULA in ABAP for calculation

    hi all,
    i have to do some calculation in my report and because of this reason i want to use formula. Could any body tell me the best way to use of formula for calculation purpose in ABAP or any other way?
    Thansk,
    abapfk
    Moderator Message: You don't need to open a thread to know the answer for this basic question. A simple search or using ABAP Help will help in getting the answer.
    Edited by: kishan P on Oct 4, 2010 11:20 AM

    There is another option to do the same thing.
    What can be done is, create running total. You can create running total from field explorer by right clicking and then new. Create Running Total Field dialog box appears. In that, provide the following:
    i)     Field to summarize - provide the field to maximize (i.e. id)
    ii)     Type of summary u2013 Maximum
    iii)     Evaluate u2013 On change of field (provide the name)
    iv)     Reset u2013 Never
    Keep this Running total field on the details section and suppress if you do not want to show it in the details section. Place this field wherever you want in the report.
    Hope this helps you. Let me know your comments.

  • Code for calculating variance between plan and actual in Co module

    Hi Abbapers,
    I have to develop a  2 fresh report : One for calculating the variance for the Plan/Actual in controlling and second for sales variance for the month Jan to Dec .
    I need your help as I have to complete this reports in this week . Its Bit urgent.
    Can you please help me with the sample code or any of the similar report which you might have created as I am bit new in ABAP. Please reply asap.
    Thanks in advance!
    Best Regards.

    Hi Deepak,
    For Finished Goods materials  if you assigned Price control  V (Moving Average) it is irrelevant  to run the Standard Cost Estimation.
    My earlier client we don't have variance because of the Moving Average Price for Finished Goods.
    Please check, It is really required Variance??  If it is required check whether variance key is automatically assigned to Process order or not. (Control Tab)
    Ravi Polampalli

  • Function module for calculating planned and actual cost of production order

    Hi ,
    Do we have any standard function module for calculating planned and actual cost for production order?
    i need to implement this in a Z-report.
    Thanks
    Srini

    Hi,
    try below function module
    CRMCO_GET_PLAN_ACTUAL_COSTS
    CO_IH_GET_PLANNED_COSTS_TOTAL
    Regards,
    Sankaran

  • Currency Translation for Calculated Key figures

    Hello Friends I want to use the Currency Translation for Calculated Key figures.
    But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
    What is the way to do fixed currency translation in query for calculated key figures.
    All the below is done now just want to specify this in query but I can'nt since it is greyed out.
    All the below is done
    I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
    2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
    3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
    which is beginning of period.

    Hi soniya
    Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
    Thanks
    Tripple k

  • Hiding the blank cells in Webi report - BO 4.0

    Hi,
    I have created a webi report in which i have used different types of blocks
    1) Form table
    2) Verticle table
    3) Horizontal table.
    so now in real time there chances that some of the blocks will not have any data.(i.e it displays blank cell) in the report.
    so now i have to hide only the blank cells and not the table headers.that means though the cells are blank i have to display headers.
    what formatting changes i need to achieve this in Webi Report.
    If anybody does this please let me know the step by step logic in detail.
    Thanks in advance.
    Regards,
    Naga Nanda Kishore.

    Hi,
    We cannot hide specifc cells in WebI, however we can choose to whether to display or not empty measure values and empty dimension value.
    So you need to select the desired block-> Right Click  and Select Format Table-> Uncheck Show rows with empty dimension values or Show rows with empty measure values whichever is required to be hidden.
    Hope this helps.
    Regards,
    Manpreet

  • How can I insert an image into a cell in Numbers for iPad?

    Hi,
    is there any way to insert an image inside a cell using Numbers for iPad? I tried doing it on desktop version and it works, then I shared it through iwork.com and downloaded into my iPad and it's showing fine on the iPad ( although there's no way to edit or change the image inside the cell ) but when I try to do the same task on iPad itself, the image always comes floating even if I place the cursor inside a cell before inserting.
    any idea how to do it or if it's even possible?
    thanks.
    John

    Images can be added to cells only as "image fill." Cell fill is an attribute of the cell, not content of the cell. Only cell content can be retrieved by a formula or by copying the content of the cell.
    Copying the cell will also copy its format, including the image fill, but I've found no way to extract the image from the cell.
    Regards,
    Barry

  • Unit of measure for calculation type C must be completed

    Hi All
    When releasing some contracts in SRM , we are getting the error message as above.
    The error message doesn't specify any particular part and the contract has more than 3000 parts.
    There are no conditions at header or item level.
    There is no Target quantity also. Just a Target value for the contract and prices for individual items are maintained.
    We are using extended classic scenario and the contract is manually created in SRM.
    I have checked the OSS notes for this error, but they are mostly for contract creation in Bidding and not for a manually created SRM contract.
    We checked the UOMs for all the contract parts with the UOMs ( Base and Purchasing) in ECC Material Master and they are OK.
    In our scenario , MM changes in ECC are replicated to SRM in real time
    Any pointers towards pin pointing the error will be rewarded!
    Regards
    Kedar

    Hi,
    We encountered this error message and resolved the problem by applying the following 3 SAP Notes:
    a)     Note #1022928 - Unit of Measure for Calculation Type C Must Be Completed
            (Previously Mentioned)
    b)     Note #1702484 - Unit of Measure for Calculation Type C Must Be Completed
    c)     Note #1517648 - Default Conditions Added for Product Category Item Type
    Although the contract required is similar to a "Limit" item, but had to be placed for bid, then the RFX PS Item Type was set to "Service" to receive the bid responses.  After accepting the bid response, then we created a contract from the bid response.  Since it was to be a "Limit" type contract, then we immediately removed the data from the following fields:
    Remove the Quantity
    Remove the Unit of Measure
    Remove the Price
    Remove the Price Condition
    After removing the values from these fields, then we switched the PS Item Type from "Service" to "Product Category".  We added the Guaranteed Minimum and account assignment data to encumber the funds.  We were able to "Release" the contract successfully.
    Bob Zinsmeister

  • I dont recall when I have been more frustrated....  the "loops" I am in on the web for support are endless.  After downloading Yosemite on my Mac my CS6 no longer works.  On your support web site you state the following for downloading and installing prev

    I dont recall when I have been more frustrated....  the "loops" I am in on the web for support are endless.  After downloading Yosemite on my Mac my CS6 no longer works.  On your support web site you state the following for downloading and installing previous versions of apps, such as CS6 " 1. open CC for desktop and go to the apps panel (no link is provided so I explored until I could download a trial version of "application manager" as that was required.  When I attempted to open it to download "Previous Versions" I could not.  I have my license number, my CS6 will not open in Yosemite and after over 2 hours I am really frustrated....  Rich@

    When I go to that link, download and then attempt to install I get the message "Webe encountered the following issues, Installer failed to initialize.  Please down load Adobe Support Advisor to detect the problem"  I then select the link "get adobe support advisor" that takes me to a site that describes a better support link since the one I have been sent to is no longer available.  I then go to that site and am told to go to CC for desktop apps, that requires me to download CC...  I don't want CC.. just want to have my CS6 PS work again....  so frustrating...

  • User Exit for calculation of inclusive  tax scenario in Sales ordercreation

    Hi All,
    What is  the User Exit for calculation of inclusive  tax scenario in Sales order creation for pricing procedure.
    Regards,
    Tulasi

    Hi Tulasi
    Please check this thread , if your problem is solved with the help of this thread then there is no need to go with the user exit.Just go with the changes in the condition types.
    Tax inclusive in base price
    Regards
    Srinath

  • Changing base for calculation of Tax

    Hi All,
    SAP standard delivers 0001 condition type in Tax calculation procedure as base for calculation of Tax. condition type 0001 picks up 0PR0 as base for calcualtion of tax. Can someone tell me how does system picks up 0PR0 as base for calculation of tax as i have to change the base of calculation.
    Any hint would be a great help.

    I think I had the cart before the horse on this problem.  The correct way to look at this is what is the best way to get the correct "Net Book Value" and not the correct tax depreciation posting as it never actually gets booked.  
    By knowing the incorrect Beginning BV, the rate depreciation is applied in year 1 and finally the desired Net BV value at the end of year 1 for tax purposes I am able to calculate the correct Unplanned Depreciation for tax to make everything work out correctly.
    correct beginning tax BV $1,200
    Beginning Asset Book Value $1,800
    depreciation $360 (20% of BV)
    Unplanned depreciation  $?
    Net BV for tax at end of Yr1  $960 ;  or  1,200 - (1,200*.2)
    With the know values above that makes my unplanned depreciation for Yr 1 to be $480.  Year 1 and all following years depreciate correctly after the Unplanned Depreciation is posted.
    I am marking this as resolved unless someone sees an error in my thinking.
    Thanks,
    Jeff

Maybe you are looking for