"Refine Edge" now automatically creates new layer... why?

For some reason, every time I use the "Refine Edge" option after making a selection, then hit "OK", Photoshop creates a new layer with a mask on it, instead of simple leaving the selection outline there and letting me decide what to do with it (which was the previous behavior).
I've no idea if this is new default behavior or if I triggered an option somewhere that I shouldn't have.
How do I make "Refine Edge" NOT create a new layer or anything like that?

In the Refine Edge dialog, there is a drop-down menu allowing you to do a number of things, including making a new layer with mask. Choose something else.

Similar Messages

Automatically create new slide after pasting large block of text?

Hello,
Does anyone know if it is possible to have Keynote automatically create new slides if I paste text that doesn't fit into a single slide? The biggest time waster I've encountered is the apparent requirement to break up large chunks of text manually.
If Keynote does not do this, any ideas as to an Applescript or something that could help?
Much appreciated

I usually try dragging from the bottom up in Web pages, it can be tricky getting at the part you want without the extraneous formatting, since that is concealed from you and web designers use many different methods for layout.
That's why pasting into a plain text document is a good idea to shake off the web formatting, otherwise you are groping around whatever Pages has interpreted the formatting to mean. Even browsers don't get this all right.
If the original was formatted as a table which won't fit one of the cells on a Pages page, it just pops and won't continue because Pages does not allow breaks in mid cell. If the cells are small enough to fit and you have pasted the table inline in the main text body of a WP file (between the margins) it will flow.
Peter

When i create new layer from background the new layer then covers up the background. It previously did not do this.

I am a rookie. This worked on previous pics but I apparently have clicked something I shouldn't have. Thanks for any help.

The problem with Actions is that as a new user, you are not going to know what steps are happening when the Action runs. The action could be deleting the background layer, for instance. Is the action one that came with Photoshop? If you sourced it from somewhere else, can you give us a link?
There is also some ambiguity in the language you use. Not your fault. But when you say 'create new layer from background' to me that probably means you are copying the background layer. If that is not the case, could you give a more detailed description of the steps you are taking?
Do you know how to upload a screen shot? If you are using Windows 7 or 8, you can use the Snipping tool to drag across your image and layer panel. Save the image, and upload to this thread using the little camera icon.

When capturing footage is there a way to automatically create new clips...

When capturing footage in Final Cut Pro is there a way to automatically create new clips like it does in iMovie. I have to capture over 9 hours of footage and I dont want to spend the time logging each clip. I also dont want to just capture the whole tape then go back and log each clip. I really like how iMovie automatically creates a new clip each time the rec/pause button was pushed. is there anyway I can get Final Cut to do this??????

You can capture the complete clip and then apply Mark > DV Start/Stop Detect over the captured clip. You could get the best of two worlds so: smooth capture and clips creation.

"create new layer without dialog" redefine shortciut

Hello.
A want to redefine default shortcut for command "Create new layer without dialog" but i cannot find this command in shortcut preferences.
In which section of shortcut preferences, in photoshop cs6, nested this command?
Thanks.

I don't believe that is a shortcut that can be redefined per se in the shortcut editor, but you could use a script and assign a keyboard shortcut to the script.
The following script will make a new layer without the dialog.
// =======================================================
var idMk = charIDToTypeID( "Mk " );
    var desc10 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref9 = new ActionReference();
        var idLyr = charIDToTypeID( "Lyr " );
        ref9.putClass( idLyr );
    desc10.putReference( idnull, ref9 );
executeAction( idMk, desc10, DialogModes.NO );
You can copy the above script, paste into Adobe ExtendScript Toolkit CS6 and then save the script to the cs6 Presets>Scripts folder in the photoshop cs6 program/application folder.
(you can name it whatever you want as long as the extension is .jsx)
Then when you restart photoshop cs6, it should be listed under File>Scripts and you can use the keyboard shortcut editor to assign a shortcut to the script.
What operating system are you using?

Actions - creating new layer always gives prompt

I'm using Ilustrator CS5 and created an action that does the following:
Selects all and copies an object
creates a new layer
pastes in places on the new layer
changes color of the selected object
renames the layer to the name of the color that was used
repeats so I have 21 different layers, all with different colors
Overall, it works very well. But, every time it makes the new layer, I get a New Layer Dialog box and I have to click 'ok.' As the action is creating 20 different layers, I'd love not to click ok for every new layer. Not sure why this dialog is coming up as it doesn't when I record the action. Any ideas?
Thanks,
Christine

In the Actions Palette, disable the Modal dialog checkbox on the left-hand side of the action step that creates the new layer.

Create new layer when copying/pasting

I'm sure we're all aware of this in Photoshop, but I've just come across a tutorial for Illustrator that assumes this also happens in this program.
Not in mine, it doesn't! I've had a trawl through Preferences (CS4) with no luck. Do you have to create a new layer then paste into it?

>>Obviously Illustrator doesn't automatically create a new layer when pasting as you get in Photshop.
Yes, that's because a Layer in Illustrator can contain many independent objects which can be individually moved, resized and otherwise manipulated. Basically an Object in Illustrator is roughly equivalent to a Layer in Photoshop and a Layer in Illustrator is roughly equivalent to a Group (shown as a folder icon) in Photoshop. That is slightly over-simplifying but a pretty good way to understand the differences.

Create new layer after active layer

Using scriptlistener I can create a new layer called "newlayer" after the active layer. So far so good.
var id197 = charIDToTypeID( "Mk " );
var desc49 = new ActionDescriptor();
var id198 = charIDToTypeID( "null" );
var ref41 = new ActionReference();
var id199 = charIDToTypeID( "Lyr " );
ref41.putClass( id199 );
desc49.putReference( id198, ref41 );
var id200 = charIDToTypeID( "Usng" );
var desc50 = new ActionDescriptor();
var id201 = charIDToTypeID( "Nm " );
desc50.putString( id201, "newlayer" );
var id202 = charIDToTypeID( "Lyr " );
desc49.putObject( id200, id202, desc50 );
executeAction( id197, desc49, DialogModes.NO );
However, without the script listener we have
var layerRef = app.activeDocument.artLayers.add()
layerRef.name = newlayername
layerRef.blendMode = BlendMode.NORMAL
// Move the new layer after the current layer
layerRef.moveAfter(app.activeDocument.artLayers[layerIndex])
The moveAfter command needs an index, which would mean looping though all the layers till to find the active layer (since we can't access that throughthe DOM). This seems a bit long winded to me. Or am I missing a trick here?

Well I would just use the scriptlistener code but if you don't want to for some reason you should make a reference to the activeLayer before add the new layer. Then use that reference as the moveAfter argument. The moveAfter method needs a layer object not a layer index. You need the index only because you are trying to supply that layer object by index.
layerRef.moveAfter(someLayerRef);
Also ( not that it really matters ) when scripting was first added there were several methods for moving a layer, moveAfter() was one of those. Those methods were combined into one method and the old methods are no longer documented in the javascript reference. So below is the documented way to move the layer.
layerRef.move(someLayerRef, ElementPlacement.PLACEAFTER);

Is it possible to automatically create new folder for each project?

Hi! Here´s another (maybe stupid) question:
I wonder if it's possible for Premiere to also automatically create a new folder on the harddrive when a new project is created. This to get all material, preview files etc for each project in a separate folder.
It´s easy to forget to manually do this and I tend to end up with many projects and files in the same folder. Makes it hard when I want to "clean house" and delete some stuff and backup other.
Thank's for any help with this!

Everyone develops their own method of project organization,
but this has worked for me through several versions of Premiere.
I keep a 'Project Template' folder that contains all of the sub-directories
that I will normally need for each job... Media, Approvals, Documents, Audio,
Rendered Image Sequences, Still Images, Finals etc.
This 'Project Template' folder also contains a template Premiere project that is
pre-set with the interface settings, column layout and project folders I will always use...
Audio (vo, music, sfx), Graphics (sequences, stills, titles, slates),
Cuts (approval versions, finals, and broadcast distribution finals).
When I start a new project I simply duplicate the entire 'Project Template' folder along
with all of its contents, then rename the folder and Premiere project to suit the current job.

Automatically Created New Playlist & Lost Album Covers

I just plugged in my new Nano last night and immediately had issues. After I updated the software, it immediately started syncing everything, even the unchecked titles. Okay. I fixed that.
Everything was looking good, the coverflow was working beautifully, but I noticed that none of my previously created ITunes' playlists had synced.
It had automatically created a new playlist with, I believe, all the music in my library, but none of my previously created playlists showed up anywhere. So, I removed this big playlist and synced again. This caused all the music dissappear from my IPod. So, I reset everything and started over again.
It once again created that new big playlist, but this time, all the album cover artwork has dissappeared. I can still see the cover artwork in my ITunes, but it is not displayed on my IPod.
Someone told me that it might be an issue with the fact that both my old and new IPod's have the same name. If this is correct, how do I change my new IPod's name. It automatically chose its own name.
Help!

Sounds like your iTunes library is larger than the iPOd can hold. When this happens, iTunes will create a playlist which fits.Do this...
Select the iPod.
Click the Music tab.
Tick *Sync music*.
Choose *Selected playlists* in the drop down and pick which playlists you want then click Apply.
To change the iPod name, slect it in iTunes, then click on it's name, like a slow double click.

Calendar is automatically creating Location points - Why?

I'm using Calendar version 6.0 running on Mountain Lion 10.8.4 on an iMac. For some reason when I make a diary entry a location point is automatically created.As you can see on the above example Calendar has automatically created "The Day" as the location which is nonsense. I never type anything into this box. I simply leave it as None. Most of the automatically created locations do not make any sense. I'm at a loss as to how to turn this extremely annoying function off.
Your help would be appreciated.
Thanks,
Dave

I am having the exact same problem.
very annoying.
Anyone with an idea how to fix this?

Automatically create new Excel file from template using data from a selected row in a separate Excel file

I am fairly new to Macro and VBA in Excel. I am trying to reduce the amount of work involved in a task that is performed often in our office. Currently, the task involves using 2 separate Excel files. One file is a tracking sheet and the second is the document
that gets sent out to the client. The second document has all the same information that is inserted into the tracking sheet. What I would like to do is have the information that is in one row on the tracking sheet populate into a new excel file that is created
automatically from an existing template.
I have been able to make this partially work. What I have been able to achieve is have the cell that is selected in the tracking sheet (the description field) copy into the new file that is created from the template that is on our server.
Sub NewRFI()
' NewRFI Macro
MsgBox Selection.Address(ReferenceStyle:=xlA1, _
RowAbsolute:=False, ColumnAbsolute:=False)
Selection.Copy
Workbooks.Add Template:= _
"template file path goes here"
Range("C14").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Range("C14").Select
Application.CutCopyMode = False
End Sub
What I need to do is get the rest of the information from that same row in the tracking sheet to copy to the new file as well. The other information includes the document number (one cell to the left of the selected cell), who it is from (one cell to the
right of the selected cell), and the date (two cells to the right of the selected cell). As stated, this information is all in the same row on the tracking sheet. Each piece of information needs to be copied to a certain cell in the new file and I do not want
the source formatting to be copied to the new file.
Ideally, I would like it to operate like so: select the first cell in the row (in this case would be the document number field). Then click a button to run the macro that will then copy the information from that row in the tracking sheet to specific cells
in the new file that is created from the template.
This process will save us from having to either manually copy and paste the information into the new file or re-type the same information that is already in the tracking sheet.
This is probably a simple thing to do but it would be great if anybody had some insight on this issue. Thanks in advance!

Try code like the following. You will have to change the target cells (D25, F1 and H4) to the ones you want, I just used some arbitrary cells as example.
Sub NewRFI()
Dim rngCell As Range
Set rngCell = ActiveCell
MsgBox Selection.Address(ReferenceStyle:=xlA1, _
RowAbsolute:=False, ColumnAbsolute:=False)
Workbooks.Add Template:="template file path goes here"
Range("C14").Value = rngCell.Value
' Change the target cells as needed
Range("D25").Value = rngCell.Offset(0, -1).Value
Range("F1").Value = rngCell.Offset(0, 1).Value
Range("H4").Value = rngCell.Offset(0, 2).Value
End Sub
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Lost signature password, removed "id" from security settings, now cannot create new signature

I lost my digital signature password.
I deleted the id in security settings
However, when trying to create a new digital id I do not get a choice to enter a new password.
There is only one password box. So, Acrobat X is still asking for the original password.
Any suggestions how I can start over and create a new digital signature.
I have gone through "help" and this forum.
Thanks to all who reply.
Roger

SOLUTION
I had to add
<Resource name="jdbc/webappDB"
     auth="Container"
     type="javax.sql.DataSource"
        maxActive="100"
     maxIdle="30"
     maxWait="10000"
        username="root"
     password="password"
     driverClassName="com.mysql.jdbc.Driver"
        url="jdbc:mysql://localhost:3306/webapp?autoReconnect=true"/>into /var/lib/tomcat6/conf/Catalina/localhost/ webapp.xml
Note: the above context file was created automatically after deploying the webapp. I had to add the <resource> to it.
The context I created in usr/share/tomcat_home/webapp/META_INF/context.xml is still there and has the same <resource>.defined in it. I did not verify whether or not it still needs to be there.
After that I had to add two policies
/var/lib/tomcat6/conf/policy.d/03catalina.policy
grant {
permission java.lang.RuntimePermission "accessClassInPackage.org.apache.tomcat.dbcp.*";
and 04webapps.policy
permission java.net.SocketPermission "127.0.0.1:3306", "connect,resolve,listen,accept";
That did the trick!
Other things that were done but have not been verified as to have any bearing on this issue.
I changed the active java from openjdk to java-sun
I added $tomcat_home/lib:$tomcat_home/lib/mysql-connector.jar:$tomcat_home/lib/commons-dbcp.jar to PATH
Changed CLASSPATH=usr/share/classpath:usr/share/java/commons-dbcp.jar:usr/share/java/mysql-connector.jar
Edited by: wlbragg on Feb 25, 2009 12:58 AM
Edited by: wlbragg on Feb 25, 2009 12:59 AM
Edited by: wlbragg on Feb 25, 2009 1:11 AM

Image Preview Export automatically creates new "images" folder?

Whenever I create an image within Fireworks CS4, I do so by following this procedure:
Image Preview > Export (and then select either .jpg or .gif).
If I want to place the image (to be named filename.jpg) within the following local directory:
My Documents/Projects/acme/images/
...it will instead place it here:
My Documents/Projects/acme/images/images/filename.jpg
Why does it add an additional images folder?
Many thanks for your help in this matter?

Hi Kevin,
In the window that pops up after you click the Export button, check for the following:
Does the File name field have the correct jpeg/gif extension?
Does the Export field have Images Only option set?
Most importantly: is the Put Images in Subfolder checkbox checked or unchecked?
One possibility is that HTML & Images is set for the export type, in which case the Put Images in Subfolder checkbox might be checked by default.
SiamJai
Innovative Fireworks Tutorials

System automatically creating new PI

I have updated a condition in the Purchase
info record and with a start date of 01.01.2011 and a end date of
31.3.2011. However the system automatically then updates for a start
date of 01.04.2011 with a wrong price against it.
Error Messages: automatic new valid date of 01.04.2011 and end date of
31.12.9999. Also price is wrong.

if your initial price had a validity from e.g. 01.01.2000 to 31.12.9999
and you enter a new price which is only valid from 01.01.2011 to 01.04.2011 then the old condition is split and will start again after your new condition validity has ended. This is SAP standard design.
So either you enter your new condition with a validity end date of 31.12.9999
or you change the validity end date of the old condition to a day earlier than the new condtions starts.

"Refine Edge" now automatically creates new layer... why?

Similar Messages

Maybe you are looking for