Bridged networking not working with nested VMware Workstation
I am having an issue that I can't seem to find any answer to....
We are running Vsphere 5.5 and I have 2 Guests each running Windows 7 64-bit. Each of these guests has VMware Workstation 10 running on them. When we P2V the systems we followed all the instructions to allow nested VMware Workstation. However, we are running into an issue where the Bridged Networking will not work. Both of the Win7 guests are on the same vlan and all of the VMs in Workstation are on the same network as well. However, while the 2 Windows 7 guests can ping each other and each of the guests can ping the VMs that are hosted locally, they cannot connect to the systems on the other guest running workstation.
I tried to upgrade the Guest NIC to VMXNet3, but that did not help.
All of the research I have done brings me to people who are having the opposite problem (ESXi nested in VMware Workstation).
How can I get the 2 bridged networks to connect?
Thanks!
The ESXi vSwitch to which the outer guests are connected must be configured for promiscuous mode and forged transmits.
Similar Messages
-
Adobe bridge raw not working with windows vista in photoshop cc, why?
adobe bridge raw not working in photoshop cc, is there a fix?
Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista. -
Auto-detect proxy settings for this network Not work with DHCP WPAD
My Network browsing Internet Through TMG The DHCP Configure To Deploy WPAD with configuration it's work good with IE 8,9 and Google Chrome, but don't work with firefox, I Tired search for the Solution for this problem but all Solution To fail.
the big problem is there are more PCs and laptops work with FireFox.And The laptops will be able to going out to another network with end usersHi conectionist,
This is taken if there is a proxy set up in your network settings on your OS. If you would like to test there may be an add on:
*[https://addons.mozilla.org/en-US/firefox/addon/smart-ip-connection-info/?src=search]
Please feel free to search to find a better one if necessary. -
"member of " not working with nested table of dates
Can someone explain why this doesn't work. The last select does not return any row. When trying the same with a table of number, it works fine.
drop table test;
drop type date_tab;
create type date_tab as table of date;
create table test(dates date_tab) nested table dates store as dates;
insert into test values (date_tab(to_date('10-jan-2007'),to_date('15-jan-2007'),to_date('15-jan-2007')));
commit;
select * from test where to_date('10-jan-2007') member of dates;
Line above should find the row, but does not return anything.> With 10G Oracle said that these two engines are now sharing the same source code
Is that documented somewhere? Regarding database versions, it was 9.0.1 that claimed an integrated parser. I don't see any update for 10g.
> So in the old days one had to do a [SELECT sysdate INTO d FROM dual] to assign a function value to a PL/SQL var - as the function did not exist in PL/SQL.
Then (from Oracle 7 onwards?) these functions were also available in PL/SQL. However, the two engines did not share common code. So functions in SQL did not always behave like function in PL/SQL and vice versa.
I don't recall that limitation in PL/SQL v1 (Forms 3 to 4.5, and database v6, though I doubt many people actually used PL/SQL on the database because (1) it was separately licensed, and (2) it didn't have stored procedures) - but then it was a while ago so I could be mistaken.
I know USER, SYSDATE and others used to be implicit queries of dual (i.e. the supplied PL/SQL function was just a wrapper containing SELECT SYSDATE INTO dt FROM dual; RETURN dt;) although that's probably just confusing the issue. -
Connect By not working with nested queries in from clause.
Using Connect By on a query which has a nested from clause(The from clause fetches around 100k records) gives incorrect results but if the same nested queries are used to build a table and the Connect By is used on the table then the output is correct.
I put the nested queries in a 'WITH' clause and got the correct output also.
I am not sure how to give the code here as you would need dump to make them work.
I am giving the a sample code:
--Non Working Code
SELECT con_item, prod_item, compsite, bcsite, ibrsite, res
FROM (SELECT con_item, prod_item, compsite, bcsite, ibrsite, res
FROM (SELECT bd.item AS con_item, bd.fromid AS compsite,
bd.toid AS bcsite, bd.toid AS ibrsite,
bd.bodname AS ID, bd.item AS prod_item,
'BOD' AS res
FROM TABLE1 bd
UNION
SELECT bc.item AS con_item,
bc.componentsiteid AS compsite,
bc.siteid AS bcsite, ibr.siteid AS ibrsite,
ibr.routingid AS ID, ibr.item AS prod_item,
op.resourcename AS res
FROM TABLE2 ibr,
TABLE3 bc,
TABLE4 op
WHERE ibr.bomid = bc.bomid
AND ibr.siteid = bc.siteid
AND ibr.routingid = op.routingid(+))
WHERE con_item IN ('SCFCD0T9B', 'SWXCD0S9B')
AND ibrsite LIKE 'CRCW%HSM')
START WITH ibrsite = 'CRCW_QA_HSM' AND prod_item = 'SWXCD0S9B'
CONNECT BY PRIOR con_item = prod_item AND PRIOR compsite = bcsiteWorking Code:
--The table TEST_V is constructed on the from clause of above query
SELECT CON_ITEM, PROD_ITEM, COMPSITE, BCSITE, IBRSITE, RES
FROM TEST_V
START WITH IBRSITE = 'CRCW_QA_HSM' AND PROD_ITEM = 'SWXCD0S9B'
CONNECT BY PRIOR CON_ITEM = PROD_ITEM AND PRIOR COMPSITE = BCSITEAlso another working code:
WITH SUB AS
(SELECT BD.ITEM AS CON_ITEM, BD.FROMID AS COMPSITE, BD.TOID AS BCSITE,
BD.TOID AS IBRSITE, BD.BODNAME AS ID, BD.ITEM AS PROD_ITEM,
'BOD' AS RES
FROM TABLE1 BD
UNION
SELECT BC.ITEM AS CON_ITEM, BC.COMPONENTSITEID AS COMPSITE,
BC.SITEID AS BCSITE, IBR.SITEID AS IBRSITE, IBR.ROUTINGID AS ID,
IBR.ITEM AS PROD_ITEM, OP.RESOURCENAME AS RES
FROM TABLE2 IBR, TABLE3 BC, TABLE4 OP
WHERE IBR.BOMID = BC.BOMID
AND IBR.SITEID = BC.SITEID
AND IBR.ROUTINGID = OP.ROUTINGID(+))
SELECT CON_ITEM, PROD_ITEM, COMPSITE, BCSITE, IBRSITE, RES, LEVEL
FROM SUB
START WITH PROD_ITEM = 'SWXCD0S9B' AND IBRSITE = 'CRCW_QA_HSM'
CONNECT BY PRIOR COMPSITE = BCSITE AND PRIOR CON_ITEM = PROD_ITEMI am sorry if I am giving incorrect syntax, please let me know if my giving the dump of table be of any help.
Regards,
Vikram
Edited by: BluShadow on 11-Jan-2012 11:05
fixed {noformat}{noformat} tags.Hi, Vikram,
Welcome to the forum!
user2765706 wrote:
Using Connect By on a query which has a nested from clause(The from clause fetches around 100k records) gives incorrect results but if the same nested queries are used to build a table and the Connect By is used on the table then the output is correct.
I put the nested queries in a 'WITH' clause and got the correct output also.What exactly is the problem? Why not use one of the queries that gives the correct output? I find that WITH clauses are a lot easier to understand and debug than in-ine views, anyway.
Are you just wondering why one of the queries doesn't work?
I am not sure how to give the code here as you would need dump to make them work. You're absolutely right! You need to post some sample data and the results you want from that data. Without that, it's much harder for people to understand what the problem is, or how to fix it.
I am giving the a sample code:
--Non Working CodeLet's call this Query 1.
SELECT con_item, prod_item, compsite, bcsite, ibrsite, res
FROM (SELECT con_item, prod_item, compsite, bcsite, ibrsite, res
FROM (SELECT bd.item AS con_item, bd.fromid AS compsite,
bd.toid AS bcsite, bd.toid AS ibrsite,
bd.bodname AS ID, bd.item AS prod_item,
'BOD' AS res
FROM TABLE1 bd
UNION
SELECT bc.item AS con_item,
bc.componentsiteid AS compsite,
bc.siteid AS bcsite, ibr.siteid AS ibrsite,
ibr.routingid AS ID, ibr.item AS prod_item,
op.resourcename AS res
FROM TABLE2 ibr,
TABLE3 bc,
TABLE4 op
WHERE ibr.bomid = bc.bomid
AND ibr.siteid = bc.siteid
AND ibr.routingid = op.routingid(+))
WHERE con_item IN ('SCFCD0T9B', 'SWXCD0S9B')
AND ibrsite LIKE 'CRCW%HSM')
START WITH ibrsite = 'CRCW_QA_HSM' AND prod_item = 'SWXCD0S9B'
CONNECT BY PRIOR con_item = prod_item AND PRIOR compsite = bcsite
[\CODE]
Working Code:Let's call this Query 2.
--The table TEST_V is constructed on the from clause of above query
SELECT CON_ITEM, PROD_ITEM, COMPSITE, BCSITE, IBRSITE, RES
FROM TEST_V
START WITH IBRSITE = 'CRCW_QA_HSM' AND PROD_ITEM = 'SWXCD0S9B'
CONNECT BY PRIOR CON_ITEM = PROD_ITEM AND PRIOR COMPSITE = BCSITE
[\CODE]Why does Query 1 not do the same thing as Query 2? That depends on what is in test_v. Only you know what test_v is, so only you can say. If you'd post the code that created test_v, maybe somebody else could help.
Also another working code:Let's call this Query 3.
WITH SUB AS
(SELECT BD.ITEM AS CON_ITEM, BD.FROMID AS COMPSITE, BD.TOID AS BCSITE,
BD.TOID AS IBRSITE, BD.BODNAME AS ID, BD.ITEM AS PROD_ITEM,
'BOD' AS RES
FROM TABLE1 BD
UNION
SELECT BC.ITEM AS CON_ITEM, BC.COMPONENTSITEID AS COMPSITE,
BC.SITEID AS BCSITE, IBR.SITEID AS IBRSITE, IBR.ROUTINGID AS ID,
IBR.ITEM AS PROD_ITEM, OP.RESOURCENAME AS RES
FROM TABLE2 IBR, TABLE3 BC, TABLE4 OP
WHERE IBR.BOMID = BC.BOMID
AND IBR.SITEID = BC.SITEID
AND IBR.ROUTINGID = OP.ROUTINGID(+))
SELECT CON_ITEM, PROD_ITEM, COMPSITE, BCSITE, IBRSITE, RES, LEVEL
FROM SUB
START WITH PROD_ITEM = 'SWXCD0S9B' AND IBRSITE = 'CRCW_QA_HSM'
CONNECT BY PRIOR COMPSITE = BCSITE AND PRIOR CON_ITEM = PROD_ITEM
[\CODE]Why does Query 1 not do the same thing as Query 3? Query 1 has these conditions:
... WHERE con_item IN ('SCFCD0T9B', 'SWXCD0S9B')
AND ibrsite LIKE 'CRCW%HSM'but Query 3 does not.
I am sorry if I am giving incorrect syntax, please let me know if my giving the dump of table be of any help.Yes, that always helps. Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data. Simplify the problem as much as possible. For example, if you have the same problem when you leave out one of the tables, then don't include that table in the problem.
Always say what version of Oracle you're using. This is especially important with CONNECT BY queries, because every version since Oracle 7 has had major improvements in this area. -
Why does the security code for my home network not work with my hp6500?
I have a HPOfficejet 6500A Plus and am running windows 7 on a Dell desktop. I've tried to get my printer to connect to a home network and every time I type in the password it won't connect...it fails the security. I've always used the direct printer cable to connect one of my desktops to the computer and am trying to get the wireless featur to work...it won't.
Hi,
Please refer the link below and download HP Print and Scan Dr utility which will be able to help in installing printer and checking for correct security key.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02271484&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
Why does my network not work with both computers
Why do we each have to reconfigure the network every time we use our computers?
What is the exact problem? Is it that your current network does not support providing Internet access to more than one computer at a time? Regardless, what is the make & model of your network's router and modem? If your network has more than one router, what is the make & models of each of them and how are they configured?
-
I have an airport extreem network that works with my two MacBooks and a iMAC. I am having no luck in getting a PC (IBM ThinkPad0 that has the PC airport software to be recognized by the network. Any suggestions?
When you introduced the AirPort Extreme, you had a condition where you have two routers in series. The simpliest solution is to reconfigure the downstream router (in this case the Extreme) as a bridge. This will allow the upstream router to provide the required NAT & DHCP services to all network clients regardless of which router they are connected to.
To reconfigure the Extreme as a bridge, you will use the AirPort Utility. (Note: I will provide the steps for using AirPort Utility v5.x)
AirPort Utility > Select the AirPort > Manual Setup
Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode) -
on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
i cant see menu page on display screenhttp://support.apple.com/kb/HT1808
-
downloaded yosemite continuity is not working with my iPhone 6. Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
-
my voice call services is not working with cellular network...only works fine with wifi..please help?
Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express. -
Comcast Cable Internet not working with router (WRT54G), but network is fine?
My Comcast Cable Internet is not working with my router (WRT54G), but my home network is fine. The internet works without router.
I have a WRT54G Wireless-G Broadband Router from Linksys.
I was using Bellsouth DSL Internet up until two weeks ago.
I had my DSL modem connected to my router, and the router let me use the internet and share some files and printers with my laptop upstairs.
A few weeks ago we changed to Comcast cable. The technician came in and connected it himself, but only for the desktop. The internet worked perfectly, and still works perfectly on my desktop (the one downstairs). He didn't really give me any instruction or CD-roms for it.
When I tried connecting my router, the internet stopped working. It was weird because the router worked for the file sharing and printer sharing between both my computers, but the internet didn't work. Although, the light for the internet is lit on the router itself.
I even have this program called "AOL Network Magic" which shows a map of what is connected to the router, and it shows that the router and my laptop and desktop are connected, but then it has an "X" for the internet connection.
I have tried everything. I lost all of my CDs and things that came with Linksys, but I downloaded some guides from the Linksys website and it doesn't really help. I tried something called "NetSet", but after I set everything up it says my router is not compatible or something with NetSet. I read a bunch of FAQs, I tried going to comcast and seeing if they had any FAQS about it, but I can't find anything.
Maybe one of you can help me?
Also, I don't know my modem's IP address. I had it for Bellsouth, and sometimes when I would lose my connection I would go there and click on "reconnect" or something like that.
So the only way I can use the internet is to disconnect everything from my router and connect the ethernet cable directly to the modem.You may open the web setup utility page of the router by typing its IP address on your browser's address bar. By default, it is 192.168.1.1. When you're asked for username, you may leave it blank. For password, its "admin". If in case that does not work, reset your router at the back for 30 secs and do a power cycle again, see if it becomes accessible after that...
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test" -
Cisco Aironet FW 15.2 Does not work with Non-Cisco Media Bridges
I have a Cisco Aironet 1142i that was just updated from 12.4(23c)JY to 15.2(4)JA1 (don’t think model matters as the issue seem to be the firmware) and now I cannot get my media bridges (3 different ones) to either connect to the 1142 AP or obtain and pass the DHCP addresses to other device connected to the built in switch. If I reload the 1142 AP firmware to 12.4, than this works fine. I have not seen anything in the release notes that changed how this works or if there is I could not find it.
Does anyone know why this changed and if there is any settings that I need to enabled / disable?
Any help on this would be greatly appreciatedMore info to add to this.
AIR-AP1142N-A-K9 Hardware Version of v06 works with firmware 15.2.
AIR-AP1142N-A-K9 Hardware Version v05 does not work with firmware 15.2, but will when downgraded to firmware 12.4.
I'm also having this issue with Cisco Aironet 3602 Fw 15.2(2)JB and 3502 Fw 15.2(2)JB$ that's on a Cisco 2500 WLAN Controller Sw Ver. 7.4.100.0.
Any help on this would be greatly appreciated -
Airport express not working with optus network
Hi there, the airport express seems not working with my optus network. It is keeping me I cannot access the internet but I do have a wifi signal. Initially I thought there was some problems with Enhernet Wan port on the AE, but after I've done some research I found there might some changes needed to be done with my old router. All I know is im using a NETGEAR router, network type is PPPOE. Also, there were people metioned on the forum that theold modern should be changed to brigdeging mode. I have no idea what is it. Please help. cheers.
Configuration is simple if you start from a factory default condition. Then connect the Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations. After confirming that it works, insert your desired administrative and WiFi passwords.
Do not expect the Airport to respond instantly to the configuration commands. BE PATIENT! -
DefaultFileName does not work with apache-webligic bridge in service pack 5
The DefaultFileName directive does not work with apache-webligic bridge
from service pack 5. It used to work with the apache-webligic bridge
from service pack 3. Can anybody tell me why? Thanks.
WeiI also had same issues using iPhone 5. Got chance to speak with senior engineers at NTC and they have confirmed 3G equipment they are using is not yet compatible with 3G band that iPhone 5 uses. So technically speaking, iPhone 5 has a hardware that is a generation ahead and not backward compatible to 3G system NTC currently uses.
On a bright side though, they confirmed that NTC is aware of the situation and is soon upgrading its hardware within next 1 or 2 months which will finally support 3G on iPhone 5. The other operator though already has support for this (don't want to mention their name but you know the alternative).
As for me, I'll be waiting for the (super frustrating) NTC to upgrade their hardware.
BTW - Apple has nothing to do with this issue.
Maybe you are looking for
-
I just bought a new 4s and I can't activate using cellular connection, what is wrong?
I just bought a new 4s and I can't activate it using cellular connection and Wi-Fi and also I can't seem to get the iTunes connection option from my phone as well. What can I do?
-
Converting time string to millisecs
Hiya I have a string representing time, that i read from a file 06:30:04.271 (hr:min:sec.millisec). What would be the best way to convert this to milliseconds. I can also add the date if necessary: 2003-12-31 I need to manipulate about 20,000 dates :
-
Mac book air trys to start up then shuts off
mac book air trys to start up then shuts off
-
I want to load current bookmarks to a new computer and then have those bookmarks available on multiple computers. I've read the tutorial on Firefox Sync, but I do not see a Firefox button on my page. How do I get to options?
-
Query to check BitLocker Status
Hello everyone, I am running a query against a collection of computers to try to check the BitLocker encryption status of these machines. The query results are error codes like (0,1,2,4,13)! I tried googling around for these codes and couldn't find a