REFRESH STATISTICS ON THE INFOCUBE

Hi ,
Under the manage tab of the infocube i have clicked the tab refresh statistics.I clicked on the log and it showed that the statistics were successfully compiled on the infocube.
Is this the only way of confirming that the refresh statistics went good on the infocube and there were no errors.
Is there any way of cross checking whether the refresh statistics went really good on the infocube.
Plz advise.
Thanks in advance.
Madhavi S Bichakal.

Hi,
You can find it in SM37, give job name = BI_STAT* and job name = BI_IND* then check the status .
The above two jobs are for Stats and Indexs.
Thanks
Reddy

Similar Messages

"Check Statistics" in the Performance tab. How to see SELECT statement?

Hi,
In a previous mail on SDN, it was explained (see below) that the "Check Statistics" in the Performance tab, under Manage in the context of a cube, executes the SELECT stament below.
Would you happen to know how to see the SELECT statements that the "Check Statistics" command executes as mentioned in the posting below?
Thanks
====================================
When you hit the Check Statistics tab, it isn't just the fact tables that are checked, but also all master data tables for all the InfoObjects (characteristics) that are in the cubes dimensions.
Checking nbr of rows inserted, last analyzed dates, etc.
SELECT
T.TABLE_NAME, M.PARTITION_NAME, TO_CHAR (T.LAST_ANALYZED, 'YYYYMMDDHH24MISS'), T.NUM_ROWS,
M.INSERTS, M.UPDATES, M.DELETES, M.TRUNCATED
FROM
USER_TABLES T LEFT OUTER JOIN USER_TAB_MODIFICATIONS M ON T.TABLE_NAME = M.TABLE_NAME
WHERE
T.TABLE_NAME = '/BI0/PWBS_ELEMT' AND M.PARTITION_NAME IS NULL
When you Refresh the stats, all the tables that need stats refreshed, are refreshed again. SInce InfoCube queries access the various master data tables in quereis, it makes sense that SAP would check their status.
In looking at some of the results in 7.0, I'm not sure that the 30 day check is being doen as it was in 3.5. This is one area SAP retooled quite a bit.
Yellow only indicates that there could be a problem. You could have stale DB stats on a table, but if they don't cause the DB optimizer to choose a poor execution plan, then it has no impact.
Good DB stats are vital to query performance and old stats could be responsible for poor performance. I'm just syaing that the Statistics check yellow light status is not a definitive indicator.
If your DBA has BRCONNECT running daily, you really should not have to worry about stats collection on the BW side except in cases immediately after large loads /deletes, and the nightly BRCONNECT hasn't run.
BRCONNECT should produce a lof every time it runs showing you all the tables that it determeined should have stats refreshed. That might be worth a review. It should be running daily. If it is not being run, then you need to look at running stats collection from the BW side, either in Process Chains or via InfoCube automatisms.
Best bet is to use ST04 to get Explain Plans of a poor running InfoCube query and then it can be reviewed to see where the time is being spent and whether stats ate a culprit.

Hi,
Thanks, this is what I came up with:
st05,
check SQL Trace, Activate Trace
Now, in Rsa1
on Cube, Cube1,
Manage, Performance tab, Check Statistics
Again, back to st05
Deactivate Trace
then click on Displace Trace
Now, in the trace display, after scanning through the output,
how do I see the SELECT statements that the "Check Statistics" command executes
I will appreciate your help.

Delete access for the Infocube data

hi,
If you want to remove the delete access from the infocube , which change should be done to the security role. Please advise.
Thanks in advance...

Hi,
May be you can try this......
S_RS_ICUBE
          Activity                      - 03 (display), 23 (maintain), 63 (activate), 66 (refresh). Uncheck 06 (delete)
          Infocube subobject   - Choose as required....including DATA
          InfoArea & InfoCube - Choose as required.
Regards,
Murali.

Refreshing statistics in Basis Cube

Hi Experts,
Why do we refresh statistics in Basis Cubes ? What are the implications if we do not refresh statistics ?
Thanks in advance.
Sheeja

Hi
It will refresh the new data in all the interrelated tables in case if they are not refreshed with the changes happend in the related tables
Regards
N Ganesh

WEBI Report returns results even though the Infocube is empty

Hi all!
I have the following problem with WebIn report refresh functionality:
Step 1 -> I run my WebIn report this way: double click on my folder >> double click on my WebIn report >> the prompt values pop-up appears and I choose a given MONTH and click RUN. After that, my report brings some values that are stored in the infocube. No problem SO FAR!
Step 2 -> I go to RSA1 in BW and clean the infocube, leaving it without registers.
Step 3 -> I do STEP 1 again and my WebIn report still brings data that was in the infocube before, but no longer exists! The report should bring 0 register as the infocube is empty.
It sounds to be a cache problem! I went to CMC >> Servers >> WebIn Server and unchecked the CACHE boxes, in order to bypass the data in cache but, it did not work.
Does somebody has an ideia of what is going on??
Thanks a lot.
regards.

Hi Alican!
I actually built the report again, from scracth.
I checked Universe and no errors came out.
regards.

Compression(Collapse) of the Infocube

After partial completion of Realignment process (approximately 20,000 CVCs) for the Planning Object Structure and Infocube, we are unsuccessfull to Compress the Infocube. There were around 20000+ requests were generated during realignment process in the Infocube.
We Realigned both Planning Object Structure & Infocube at a time.
As part of master and transaction data daily loads, we follow some steps to this infocube;
1) Delete Index ....... Delta
2) DTP ...... Delta
3) Create Index
4) Create Statistics
5) Compress/Collapse .... Delta
The job getting failed when it reaches to the "Compress/Collapse of Infocube".
I appreciate all suggestions......

What does the job log say?Any errors?
I think this is more a BI post and get better answers if you post there.

Can not refresh data int the report...

Application on C#.
Steps:
1. Get Report without data from the database
2. Change the dataconnections in report to the current user
3. refresh data on the report (FilePath = TempFilePath)
4. Resave report file with data
5. Automatically open CrystalReportsViewer2008 and load the report
Result
On developer machine is allright, but on the user machine data isn't refreshed. Therefore CrysrtalReportsViewer2008 can't open report. It say that check the SaveDatawithReport parameter.
In process I found that in temp directory on user pc, didn't creates some temprorary files which creates on developer PC. Why? Help me please.
Sorry for my English.

There is the code of my programm
function ParseReport is refreshed the data and change dataconnections for current user
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Data.SqlClient;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.IO;
using System.Diagnostics;
using CRApp;
using Microsoft.Win32;
namespace CRApp
     * u041Au043Bu0430u0441u0441 u0434u043Bu044F u0430u0432u0442u043Eu043Cu0430u0442u0438u0437u0438u0440u043Eu0432u0430u043Du043Du043Eu0433u043E u0432u0438u0437u0443u0430u043Bu044Cu043Du043Eu0433u043E u0434u043Eu0441u0442u0443u043Fu0430
     * u043A u0444u0430u0439u043Bu0430u043C u0448u0430u0431u043Bu043Eu043Du043Eu0432, u0441u0433u0435u043Du0435u0440u0438u0440u043Eu0432u0430u043Du043Du044Bu0445 u0432
     * u043Fu0440u043Eu0433u0440u0430u043Cu043Cu0435 Crystal Reports
    public partial class Export2CR_MForm : Form
        public Export2CR_MForm()
            InitializeComponent();
            Start();
        public void Start()
            LoginForm Login = new LoginForm();
            DialogResult Dres = Login.ShowDialog();
            if (Dres == DialogResult.OK)
                if (Login.GetConStr().ToString() != "")
                    GetReportNamesFromDataBase(Login.GetConStr());
                    SetConnectionString(Login.GetConStr());
                    this.CenterToScreen();
                    Visible = true;
                    Login.Close();
            else
                Login.Close();
                this.CenterToScreen();
                this.OnClosed(null);
             * u041Fu043Eu043Bu0443u0447u0430u0435u043C u043Fu0443u0442u044C u043A u0432u0440u0435u043Cu0435u043Du043Du044Bu043C u0444u0430u0439u043Bu0430u043C
            TempFilePath = Path.GetTempPath();
         * u041Au0440u0438u0441u0442u0430u043Bu043Eu0432u0441u043Au0438u0439 u0432u044Cu044Eu0432u0435u0440u043Eu043A
        CrystalDecisions.Windows.Forms.CrystalReportViewer viewer;
         * u041Fu0443u0442u044C u043A u0432u0440u0435u043Cu0435u043Du043Du043Eu0439 u043Fu0430u043Fu043Au0435
        private string TempFilePath;
         * u041Fu0430u0440u0430u043Cu0435u0442u0440 u0437u0430u043Fu0438u0441u0438 u0432 u0440u0435u0436u0438u043Cu0435, u0442u0430u0431u043Bu0438u0446u0435 (u0438u0442u0434...)
         * u041Du0443u0436u0435u043D u0434u043Bu044F u0442u043Eu0433u043E u0447u0442u043Eu0431u044B u0432u044Bu0431u0438u0440u0430u0442u044C
         * u043Eu043Fu0435u0440u0435u0434u043Bu0451u043Du043Du044Bu0439 u0434u0430u0442u0430u0441u0435u0442, u0441u043Eu043Eu0442u0432u0435u0442u0441u0442u0432u0443u044Eu0449u0438u0439 u0432u044Bu0431u0440u0430u043Du043Du043Eu0439 u0437u0430u043Fu0438u0441u0438
        private int ObjectIDOfTemplate;
         * u0423u0441u0442u0430u043Du043Eu0432u043Au0430 u0437u043Du0430u0447u0435u043Du0438u044F ObjectIDOfTemplate
        public void SetObjectIDOfTemplate(int /*
                                               * ObjectID u0442u043Eu0433u043E u0448u0430u0431u043Bu043Eu043Du0430,
                                               * u043Au043Eu0442u043Eu0440u044Bu0439 u043Du0430u0434u043E u043Fu043Eu043Bu0443u0447u0438u0442u044C
                                                  EnternalObjectID)
            ObjectIDOfTemplate = EnternalObjectID;
         * u041Fu043Eu043Bu0443u0447u0438u0442u044C ObjectID u0448u0430u0431u043Bu043Eu043Du0430
         * u0441 u043Au043Eu0442u043Eu0440u044Bu043C u0440u0430u0431u043Eu0442u0430u043Bu0438 u0434u043Bu044F
         * u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u0435u0433u043E u0432u043Du0435 u0431u0438u0431u043Bu0438u043Eu0442u0435u043Au0438
        public int GetObjectIDOfTemplate()
            return ObjectIDOfTemplate;
         * u041Fu0443u0442u044C u043A u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
        private string TemplateFilePath;
         * u0423u0441u0442u0430u043Du043Eu0432u0438u0442u044C u043Fu0443u0442u044C u043A
         * u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
        public void SetTemplateFilePath(string In)
            TemplateFilePath = In;
         * u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Fu0443u0442u044C u043A
         * u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
        public string GetTemplateFilePath()
            return TemplateFilePath;
         * u0424u0443u043Du043Au0446u0438u044F u043Eu0442u043Au0440u044Bu0442u0438u044F u0444u0430u0439u043Bu0430,
         * u043Fu043Eu043Bu0443u0447u0435u043Du043Du043Eu0433u043E u0438u0437 u0431u0430u0437u044B u0438
         * u043Fu043Eu043Bu043Eu0436u0435u043Du043Du043Eu0433u043E u0432u043E u0432u0440u0435u043Cu0435u043Du043Du0443u044E u043Fu0430u043Fu043Au0443
        public int ParseReport(string FilePath)
            viewer = new CrystalDecisions.Windows.Forms.CrystalReportViewer();
            CrystalDecisions.CrystalReports.Engine.ReportDocument rd =
                new CrystalDecisions.CrystalReports.Engine.ReportDocument();
            try
                rd.Load(FilePath);
                try
                    for (int i = 0; i < rd.DataSourceConnections.Count; i++)
                        rd.DataSourceConnections<i>.SetConnection(
                            GetConnectionString().GetServerName(),
                            GetConnectionString().GetDatabaseName(),
                            GetConnectionString().GetUserName(),
                            GetConnectionString().GetPassword()
                        for (int j = 0; j < rd.Database.Tables.Count; j++)
                            DataTable dataSet = new DataTable();
                            SqlConnection C = new SqlConnection(GetConnectionString().ToString());
                            string ViewName = GetDataViewName(GetConnectionString(), ParseTableName(
                                            rd.Database.Tables[j].Name));
                            SqlCommand Q = new SqlCommand("select * from " + ViewName
                                , C);
                            Q.CommandType = CommandType.Text;
                            SqlDataAdapter adapter = new SqlDataAdapter();
                            adapter.SelectCommand = Q;
                            adapter.Fill(dataSet);
                            rd.Database.Tables[j].SetDataSource(dataSet);
                catch (Exception e)
                    MessageBox.Show(e.Message);
                try
                    SetTemplateFilePath(TempFilePath + "\\" + FileTreeView.SelectedNode.Text.ToString() + ".rpt");
                    rd.ReportOptions.EnableSaveDataWithReport = true;
                    viewer.ReportSource = rd;
                    viewer.RefreshReport();
                    rd.SaveAs(TemplateFilePath);
                    rd.Close();
                    return 0;
                catch (Exception e)
                    MessageBox.Show(e.Message);
                    return -1;
            catch (Exception ex)
                rd.ReportOptions.EnableUseDummyData = true;
                rd.ReportOptions.EnableSaveDataWithReport = true;
                viewer.RefreshReport();
                rd.SaveAs(TemplateFilePath);
                MessageBox.Show("Error: Could not read file from disk. Original error: " + ex.Message);
                return -1;
         * u0420u0430u0437u0431u0438u0435u043Du0438u0435 u0438u043Cu0435u043Du0438 u0442u0430u0431u043Bu0438u0446u044B
         * u0434u043Bu044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u043Du043Eu043Cu0435u0440u0430 u043Au043Bu0430u0441u0441u0430
        public string ParseTableName(string TableName)
//            MessageBox.Show(TableName);
            int x = 0;
            if (TableName.Contains("Class"))
                x = TableName.LastIndexOf("s");
                return TableName.Remove(0,x+1);
            if(TableName.Contains("Attr"))
                x = TableName.IndexOf("r");
//           MessageBox.Show(x.ToString());
//           MessageBox.Show(TableName.Remove(0, x+1));
            return TableName.Remove(0, x+1);
         * u0424u0443u043Du043Au0446u0438u044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u0444u0430u0439u043Bu0430 u0438u0437 u0431u0430u0437u044B
        public int ParseReportWithDataBase()
            try
                string ConnectionString = GetConnectionString().ToString();
                SqlConnection C = new SqlConnection(ConnectionString);
                C.Open();
                string SelectString = "select P119 from "+ GetDataViewName(GetConnectionString(),"24") +" where P115='";
                SelectString = SelectString+FileTreeView.SelectedNode.Text.ToString()+"'";
                SqlCommand Q = new SqlCommand(SelectString, C);
                Q.CommandType = CommandType.Text;
                SqlDataAdapter adapter = new SqlDataAdapter();
                adapter.SelectCommand = Q;
                DataTable table = new DataTable();
                adapter.Fill(table);
                byte[] b = (byte[])table.Rows[0].ItemArray.GetValue(0);
                FileStream fs = File.Create(TempFilePath+"\\"+FileTreeView.SelectedNode.Text.ToString()+".rpt");
                fs.Write(b, 0, b.Length);
                fs.Close();
                C.Close();
                return 0;
            catch (Exception ex)
                MessageBox.Show(ex.Message);
                return -1;
         * u0421u0442u0440u0443u043Au0442u0443u0440u0430, u043Eu043Fu0438u0441u044Bu0432u0430u044Eu0449u0430u044F u043Fu0430u0440u0430u043Cu0435u0442u0440u044B
         * u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F u043A u0431u0430u0437u0435 u0434u0430u043Du043Du044Bu0445,
         * u043Au0430u043A u0434u043Bu044F u0432u043Du0435u0448u043Du0435u0433u043E u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F
         * u0442u0430u043A u0438 u0434u043Bu044F u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E
        public struct ConnectionString
             * u0418u043Cu044F u0441u0435u0440u0432u0435u0440u0430 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
            private string DataSource_Value;
             * u041Du0430u0437u0432u0430u043Du0438u0435 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
            private string InitialCatalog_Value;
             * u0418u043Cu044F u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
            private string UserID_Value;
             * u041Fu0430u0440u043Eu043Bu044C
            private string Password_Value;
             * u041Fu0435u0440u0435u0433u0440u0443u0436u0435u043Du043Du044Bu0439 u043Au043Eu043Du0441u0442u0440u0443u043Au0442u043Eu0440
             * u0434u043Bu044F u0440u0443u0447u043Du043Eu0439 u0438u043Du0438u0446u0438u0430u043Bu0438u0437u0430u0446u0438u0438
             * u0441u0442u0440u043Eu043Au0438 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F,
             * u043Du0443u0436u0435u043D u0434u043Bu044F u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u0435u0433u043E
             * u0432 u043Eu0434u0440u0443u0433u0438u0445 u0444u043Eu0440u043Cu0430u0445
            public ConnectionString(string /*
                                            * u0418u043Cu044F u0441u0435u0440u0432u0435u0440u0430 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
                                              InDataSource_Value,
                                    string /*
                                            * u041Du0430u0437u0432u0430u043Du0438u0435 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
                                              InInitialCatalog_Value,
                                    string /*
                                            * u0418u043Cu044F u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
                                            */ InUserID_Value,
                                    string /*
                                            * u041Fu0430u0440u043Eu043Bu044C
                                            */ InPassword_Value)
                DataSource_Value = InDataSource_Value;
                InitialCatalog_Value = InInitialCatalog_Value;
                UserID_Value = InUserID_Value;
                Password_Value = InPassword_Value;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F u0441u0435u0440u0432u0435u0440u0430
             * u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
            public string GetServerName()
                return DataSource_Value;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Du0430u0437u0432u0430u043Du0438u0435
             * u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
            public string GetDatabaseName()
                return InitialCatalog_Value;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F
             * u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
            public string GetUserName()
                return UserID_Value;
             * u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Fu0430u0440u043Eu043Bu044C
             * u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
            public string GetPassword()
                return Password_Value;
             * u041Fu0435u0440u0435u0432u043Eu0434 u0441u0442u0440u0443u043Au0442u0443u0440u044B u0432 u0442u0435u043Au0441u0442u043Eu0432u044Bu0439 u0432u0438u0434
             * u0434u043Bu044F u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u043Fu0440u0438 u0441u043Eu0437u0434u0430u043Du0438u0438 u043Au043Eu043Du043Du0435u043Au0442u043Eu0440u0430
            public override string ToString()
                return "Data Source="+DataSource_Value+";Initial Catalog="+
                    InitialCatalog_Value+";User ID="+UserID_Value+";Password="+
                    Password_Value;
         * u0424u0443u043Du043Au0446u0438u044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u0441u0442u0440u043Eu043Au0438 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F u043Fu043E u0443u043Cu043Eu043Bu0447u0430u043Du0438u044E
         * u043Du0443u0436u043Du0430 u0431u044Bu043Bu0430 u0434u043Bu044F u0442u0435u0441u0442u043Eu0432
        static private string GetDefaultConnectionString()
            return "Data Source=BSRV01;Initial Catalog=Prokat_Last;User ID=sa;Password=";
         * u0412u043Du0443u0442u0440u0435u043Du043Du044Fu044F u0441u0442u0440u043Eu043Au0430 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
         * u043Du0435 u0434u043Eu0441u0442u0443u043Fu043Du0430 u0434u043Bu044F u0432u044Bu0437u043Eu0432u0430 u043Du0430u043Fu0440u044Fu043Cu0443u044E
        private ConnectionString localConnectionString;
         * u0423u0441u0442u0430u043Du043Eu0432u0438u0442u044C u0441u0442u0440u043Eu043Au0443 u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
        public void SetConnectionString(ConnectionString CS)
            this.localConnectionString = CS;
         * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0441u0442u0440u043Eu043Au0443 u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
        public ConnectionString GetConnectionString()
            return this.localConnectionString;
         * u0424u0443u043Du043Au0446u0438u044F u0443u0434u0430u043Bu0435u043Du0438u044F u0432u0440u0435u043Cu0435u043Du043Du043Eu0433u043E u0444u0430u0439u043Bu0430
         * u043Fu043Eu0441u043Bu0435 u0437u0430u0432u0435u0440u0448u0435u043Du0438u044F u0432u0441u0435u0445 u043Eu043Fu0435u0440u0430u0446u0438u0439 u0441 u0448u0430u0431u043Bu043Eu043Du043Eu043C
        private void MainForm_FormClosed(object sender, FormClosedEventArgs e)
            if (FileTreeView.Nodes.Count!=0)
                if (File.Exists(TemplateFilePath))
                    File.Delete(TemplateFilePath);
         * u041Eu0431u0440u0430u0431u043Eu0442u0447u0438u043A u0434u0432u043Eu0439u043Du043Eu0433u043E u043Au043Bu0438u043Au0430
         * u043Fu043E u0448u0430u0431u043Bu043Eu043Du0443 u0432 u0434u0435u0440u0435u0432u0435 u0444u0430u0439u043Bu043Eu0432
        public void FileTreeView_DoubleClick(object sender, EventArgs e)
            int Result = 0;
            try
                Result = ParseReportWithDataBase();
                if (Result == 0)
                    Result = ParseReport(TempFilePath + FileTreeView.SelectedNode.Text.ToString() + ".rpt");
                    if (Result == 0)
                        Process.Start(TemplateFilePath);
                else
                    MessageBox.Show("u0424u0430u0439u043B u043Du0435 u043Cu043Eu0436u0435u0442 u0431u044Bu0442u044C u043Eu0442u043Au0440u044Bu0442!");
            catch (Exception ex)
                MessageBox.Show(ex.Message);
         * u041Fu043Eu043Bu0443u0447u0435u043Du0438u0435 u0432u0441u0435u0445 u0444u0430u0439u043Bu043Eu0432 u0441 u0440u0430u0441u0448u0438u0440u0435u043Du0438u0435u043C .rpt
         * u0438u0437 u0431u0430u0437u044B u043A u043Au043Eu0442u043Eu0440u043Eu0439 u043Fu0440u0438u0441u043Eu0435u0434u0438u043Du0438u043Bu0438u0441u044C
        public void GetReportNamesFromDataBase(ConnectionString CS)
            try
                SqlConnection C = new SqlConnection(CS.ToString());
                SqlDataAdapter adapter = new SqlDataAdapter();
                DataTable table = new DataTable();
                table.Clear();
                string sqlcom = "Select P115 from " + GetDataViewName(CS,"24") + " where P116 like '%.rpt'";
                SqlCommand Q1 = new SqlCommand(sqlcom,C);
                Q1.CommandType = CommandType.Text;
                adapter.SelectCommand = Q1;
                adapter.Fill(table);
                FileTreeView.Nodes.Clear();
                for (int i = 0; i < table.Rows.Count; i++)
                        FileTreeView.Nodes.Add(table.Rows<i>.ItemArray.GetValue(
                            table.Rows<i>.ItemArray.Length-1).ToString());
//                        MessageBox.Show(table.Rows<i>.ItemArray.GetValue(0).ToString());
                C.Close();
            catch (Exception ex)
                MessageBox.Show(ex.Message);
         * u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F DataView
         * u0434u043Bu044F u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
        private string GetDataViewName(ConnectionString CS,string ClassID)
            string ViewName = "";
            SqlConnection C = new SqlConnection(CS.ToString());
            C.Open();
            SqlCommand Q = new SqlCommand("[dbo].[_SysGetClassesInfoNew1]"/*P115 from dbo.Attr24 where P116='.rpt'*/, C);
            Q.CommandType = CommandType.Text;
            SqlDataAdapter adapter = new SqlDataAdapter();
            adapter.SelectCommand = Q;
            DataTable table = new DataTable();
            adapter.Fill(table);
            for (int i = 0; i < table.Rows.Count; i++)
                if (table.Rows<i>.ItemArray.GetValue(0).ToString() == ClassID)
                    ViewName = table.Rows<i>.ItemArray.GetValue(13).ToString();
                    // MessageBox.Show(ViewName);
            C.Close();
            return ViewName;
         * u041Eu0431u0440u0430u0431u043Eu0442u0447u0438u043A u043Au043Bu0438u043Au0430 u043Du0430 u0432u044Bu043Fu0430u0434u0430u044Eu0449u0435u043C
         * u043Cu0435u043Du044E u0432 u043Fu0443u043Du043Au0442u0435 "Delete"
        private void deleteToolStripMenuItem_Click(object sender, EventArgs e)
            FileTreeView.SelectedNode.Remove();

Unable to view data in the InfoCube as well as in the query

Hi all,
I have done the Init Load into an InfoCube 0Pur_c01. The Monitoring status is Green. I checked the Qm status which is green. There is data in the PSA.
However, I am unable to view data in the InfoCube. Also when I execute the report I am receiving 'Application Data not found'error.
It looks to be a strange sitaution.
Please help me out
Regards
YJ

Hi,
I hope, some times the the unavailability of "PROCESSKEY" value for the records delivers like this.
Refer the note: 353042
And also refer the links:
Re: Problem extracting 2LIS_03_BX into 0IC_C03
Re: Records Not Added
And also search this forum with "PROCESSKEY"
With rgds,
Anil Kumar Sharma .P

InfoCube Modelling-Adding data from different ODS's on to the Infocube

Hi Experts,
I am new to SAP BI. I have a basic doubt on Modelling the InfoCube.
In our requirement, I have to populate data from 9 custom SAP Tables on to 9 ODS's. And, then take these data on to Infocubes.
And, they want to reduce the number of cubes as much as possible. So, I have to combine the data from different ODS's and build 2-3 Infocubes.
For Example.
I am going to combine 5 ODS's data on to 1 CUBE based on Delivery number...
there are 5 ODS with common key Delivery number. And, suppose I have added some set of fields from ODS1.
And, now when I add other set of fields from the second ODS, WHAT WILL HAPPEN TO THE 'Delivery Number' field ??
I will make it clear.
I have a record in CUBE already containing Fields- : Delivery no, field_a, field_b, field_c, field_d. Where the 'Delivery no =112333'. This record comes from ODS1.
Now, I want to add data data from ODS2, containg fields -: Delivery no, field_e, field_f, field_g, field_h.
And, what happens to the already existing record in CUBE with 'Delivery no = 11233'. ?
Will the value in this info-object get overwritten ?
OR.. will it combine the data from both the ODS's and show it as ONE record ???
Please advice ... How will I solve this scenario ?
Thanking You in Advance
Shyne Sasimohanan

Answer for your question and the suggestion.
the data will look like as given below
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            0           0            0            0
11233          0           0          0             0           1           1           1          1
but the best way, according the design standards is creating another DSO on the top of all the DSO's and combine all the data in that DSO and send the data to Infocube. then the data will be shown as below.
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            1           1           1          1
Regards,
Siva A

How to refresh after delete the records in ALV report ?

Hi Friends,
How to refresh after delete the records in ALV report.
I am deleting records in ALV report .
After successful delete the screen should refresh.
u201C Deleted records should not appear in the screen u201C.
Please guide me.
Regards,
Subash

Hi subhash,
FORM user_command USING r_ucomm LIKE sy-ucomm      rs_selfield TYPE slis_selfield.
WHEN 'BACK'.
Refresh the internal table from the ALV grid
      PERFORM update_alv_tab.
ENDFORM.                    "user_command
FORM update_alv_tab .
DATA : e_grid TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = e_grid.
CALL METHOD e_grid->check_changed_data.
"update_alv_tab
CALL METHOD e_grid->refresh_table_display.
ENDFORM.                    " UPDATE_ALV_TAB
Then see in Debug mode is it updating or not..
Please confirm .
And please paste the code if you can.
Regards.

How can i stop refresh action of the IE Browser in my applet

I am running my applet in IE browser, My applet loads with an initial screen, applets starts changing its state as user is working on it, but if the user uses the Refresh option of the browser or goes to url and press ENTER key, my applet comes back to the initial screen.
How do i stop my applet from going back to the initial screen. Help is very urgently needed.
thanks
Sridhar Nallapu

Thank you for the response,I have some complex screens that i show on the applet, JDesktopPane that is displayed in the Applet contains number for internal frames which are dependent on the data that is displayed in other internal frame. SO saving the state of the applet becomes very diffucult for me.
I want something like repaint functionality to happen when the browser refresh button is clicked. But on refresh button of the Browser will invariably load the Applet.
I am looking for a solution where we could stop reloading of the applet.
or call specific method while reload is happening.
I am looking for a solution, where applet refresh can stopped thru a java script.

Format of Date field is loading wrongly in the Infocube 0pp_c01.

Hi,
Format of Date field is loading wrongly in the Infocube 0pp_c01. But it is loading properly into PSA.
I am loading data into PP infocubes from the following DataSources.(they all are 3.x datasources)
1. 2LIS_04_P_MATNR
2. 2LIS_04_P_ARBPL
3. 2LIS_04_P_COMP
The data is coming properly upto PSA. For example Actual Start date is loaded in cube like 733.884.
And, it is the same issue with all the cubes. So I checked the update rules. But, in it the mapping is done properly.
Thanks $ Regards
Shyne Sasimohanan
+91-9632674245

Hi,
HEre also value is loaded correctly. The reason u are seeing it in this format is because it is mapped into a key figure in the info cube.
It will store the value as number of days from a standard date like 1/1/1000 or 1/1/1900 - not sure which one of these, u should be able to search and find the correct date in the forums..but this is the logic behind it
Hope it helps.
Regards,
Rathy

Adding a new field in the infocube

Hi Friends,
I have a small issue i need to add a field into the the infocube which already has data in it.
I went through the concept of remodelling and through the posts in SDN and also a link which guided me through the entire process but still i have a problem.
I have 5 characteristics and 3 keyfigures in my infocube which have data in it.
Through Help.sap.com i cam to know that i need to take a backup of the data before i do the remodelling.
Is it that i need to create a new infocube push all the data there.Do the remodelling on the old infocube and again push the data from the new infocube to the old infocube.How do i do this.
How do i populate data to the newfields in the old infocube.
Can someone explain me with any steps.It could be very useful to me.
Thanks in advance.
Regards,
Harish

Hi Kanagaraj,
Thanks a lot for your help.
Actually those steps dint work but i created a new infocube and copied the structure from old infocube and then just created a Transformation and DTP.It worked fine.Did not generate a export datasource.
But for my previous question
3 characteristics and 3 keyfugures.
Want to add a new field based on the department ID
Tthe values have to be populated for the new field.
It is not a constant value.So what should i choose in the conditons.
Regards,
Harish

The InfoCube contains non-cumulative values

Hi,
While creating multicube for inventory on two cubes its askin the below "The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube)", what is that and how to solve this,
Please through some light on this its urgent.
Chandan

Hi,
Your multi cube is probably based on the infociune 0IC_C03 containing non cumulative key figures taht's why you get this message.
You generaly don't have to maintain validity area unless you are in a special configuration (for exemple loading data from two source systems).
UThe following link should give more information about validity area with non cumulative :
[http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm]
Hope this helps.
Cyril

How to Include the Infocubes in a Multiprovider..!!

Hello Experts,
Question is related to multiproviders. I have some 20 to 30 of the infocubes in Dev System.
I have 2 multiproviders in the same system. I come to know..some of the infocubes missed out in multiproviders.
I tried to add those missed infocubes into multiprovider (MPRO --> Context Menu --> Change ) Change Structure.
But i found some of the infocubes are not available in the MPRO Structure Itself. For your info those all missed infocubes all are avaialable in the Dev system into some other info areas.
Now Question is how to include the infocubes of which of them are not available in MPRO Structure itself. I want to add the infocubes in the Multiprovider itself.
Please reply me the answer for the above scenario.
Thanks and Regards,
SN.

Hi Parvin,
Thanks for your reply. But i already tried as you mentioned.
Here my issue is..even for giving the tickmark also..the infocube needs to be opened in the MPRO structure.
My problem is Infocube itself is not opening in MPRO Structure.
How to include the infocube in the MPRO Structure itself.
Those cubes are avaialable in the Dev system where as those are not available in MPRO.
Thanks,
SN

REFRESH STATISTICS ON THE INFOCUBE

Similar Messages

Maybe you are looking for