Refresh variable in planning folder
Hello all,
I've created two variables: the first (value selection variable) is selected by user and the second (user exit variable) is dependent by the first one. When the selection is done the planning layout depending theese variables must refresh automatically.
In the bps0 transaction refresh works correctly, but in the planning folder it is necessary to close and re-open the layout. Is there a way to refresh automatically variables in the planning folder too as in BPS0?
Regards
Riccardo
Hi ..
What filip said its correct, only its the oposite thing.
l_buffer_call has to be set to ' ', so it refreshes all the variables when one is changed.
I think the solution to your problemas must be to use the variable Z_GET_VARIABLE_DETAIL as explained in said "How to.. variable of type exit" paper.
Cheers.
null
Similar Messages
-
Select more value of variable in planning folder
hi gurus,
I'm using planning folder.
In planning folder there is a variable that contain many value, for example 0COSTCENTER that contain 10 singles values. (from 1 to 10)
User wants to select some values contained in variable.
For example 2 and 5, even if it is authorized on all the cost center contained in variable.
In this moment it selects one to the time.
how I can make to resolve this problem?
Thanks
DavideDavide,
sorry to say that, that'z the way BPS works.
it's one of the BPSlimitation & many people are asking for an answer from SAP.
as a workaround, you can do following things.
1. user can select variable range, for example 2 to 5.
2. create a variable with properties "user specific values" & fill in required cost centers for each user & don't check the flag "input allowed by user".
in the 2nd option, you can assingn multiple single values to USER1.
if u assign, cost center 2 & 5 to USER1, USER1 gets ability to plan on both 2 & 5 without even selectiing cost centers.
3. you can even look into authorization variables & user-exit variables if they meet your requirements.
hope it helps. -
Medium description of Variable in the planning folder
Hi Experts,
In one of our planning folders the variable for infoobject(Cstcenter) is not put pulling the medium description in the varible section(Top part of planning folder) but same variable is pulling the medium descprion in the header of the layout (Bottom part of the llayout) with in the same folder. This problem is also for only few Costcenters, some costcenters it is pulling the data in both variable section and in the layout section
Any thoughts on this . Please share me your ideas on this. I know this is very simple but little confusing Since the same variable is dipalying the value in place but not in other place. Anybody had this problem.
Thanks in advance
Best regards
SAPThanks for your reply Bindu. In both the places test replacement and char test defined as "Medium". It is dipaying the medium text in both the places for only few CC's, but few CC's it is not diplaying the descrption in the varaible section..
Any other areas i need to check.
Thanks in advance.
Best regards
SAP -
Parameter Exit Function in Planning Folder
Hi all,
I created the planning function in SEM BPS using exit function. And then I added the parameter exit function 0VERSION to this function. After that, I tried to put this function in the planning folder.
Does anybody know how to put the parameter exit function to the planning folder?
Because I need the user to fill the value of the 0VERSION before they run the function.
I assume this should work as the selection screen.
Currently, Every time I run this function, there is no selection screen or the place that I could fill the value for this field. So, the system always receives no value for this field.
Or Maybe you have another approach to get the user's value without restrict the data before run the exit function.
Thanks a lot for your help,
-Martin Darmawi-This behaviour is quite normal. You should use different approach.
Parameters in exit functions can be filled in parameter group only and only with fixed values.
You should create a planning variable, put it to the folder and then read value of this variable in your exit function with 'API_SEMBPS_VARIABLE_GETDETAIL' for example. -
Steps to create a planning folder in detail.
hai friends,
i am new to BPS .i want to create a planning folder.so i need detail steps and documentation.
Thankyou,
shankar.Hi,
T.code : UPSPM
1. Go to that t.code and create a planning folder . (tech name & description)
2. once you given the details then it will you take the next screen there you will find all your planning area , level , variable , layout and function.
3. In the Right hand side , you will find the planning folder under the planning folder you will find variable , global planning function and input layout.
4. Drag and drop your variable to Right hand side from the particular planning area which you want to make a planning folder.
5. then drag and drop the layout and function under the the planning area to Right hand side of input layout folder.
To execute the planning folder you can use t.code UPSPL.
hope this helps.
Regards,
Siva. -
Web Interface builder - Not displaying planning folder after transporting
I created an web-enabled planning folder and transported it to the quality system.
In the development system works perfectly (variables, layouts, links, user-exits, etc).
After transporting it to the quality system when I run this web planning folder the page doesn't load and displays with an empty white web page.
I tried to re-generate it in the quality system, but I'm having the same problem. I haven't recieved any error message.
Development system:
SAP_BW 350 0019 SAPKW35019 Business Information Warehouse
SEM-BW 400 0012 SAPKGS4012 SEM-BW 400 : Add-On Upgrade Request
BI_CONT 353 0007 SAPKIBIFP7 Business Intelligence Content
Quality system:
SAP_BW 350 0019 SAPKW35019 Business Information Warehouse
BI_CONT 353 0007 SAPKIBIFP7 Business Intelligence Content
SEM-BW 400 0012 SAPKGS4012 SEM-BW 400 : Add-On Upgrade RequestThanks for your post.
I tried re-transporting and re-generate it again and I'm still having the same problem.
Have you heard of a note or something for a similar problem?
The only thing I recall is that this client was using SEM 3.5 before and upgraded to SEM 4.0 recently. -
Problem with Authorization for Planning folder
Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
Regards,
AbrahamCalling Thru Trans code: BPS0 in ECC 6
getting this error:
Error while calling up RFC
Message No. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"An error occurred during the receipt of a complex parameter."
after i check in bw trans code:st22
Following this error message:
Category Internal Kernel Error
Runtime Errors PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC
Short text
An error occurred during the receipt of a complex parameter.
What happened?
During a remote function call, an error occurred while converting
a complex parameter.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
An error occurred during the conversion of a complex parameter. -
Problem with Authorization for BW BPS planning Folder
Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
if any one has faced the same issue let me know.
Regards,
AbrahamHI ,
I Checked it out we dont have that cube in our system.
Regards,
Abraham -
How to write data from planning folder into a planning cube in BPS
Hi All,
I have an issue in writing data from planning folder to planning cube.
I updated the excel sheet in planning folder in UPSPL tcode.
After clicking on save button in the excel sheet the data did not get updated into the cube.
I set the real time cube to planning mode.
Please let me know if there are any settings to save the data to cube or how can it be done.
Thanks in advance.
Regards,
Lavanya.Hi Lavanya,
What do you mean by "the data did not get updated into the cube" ?
Don't you find a yellow request in the cube administration transaction ? What happened if you set it to green ?
Regards,
Fred -
Customer exit variable in Planning filter - IP
Hi,
I am new to business planning. I am trying to use a customer exit variable in filter, while performing check system generates message "RFC failue error". the logic is written to get the current year. But I am not able to use this variable? Can you please answer me this question... Can I use Customer exit variables in planning modeler filters or planning functions ?Hi there,
Yes you can, and it is used very often in both.
Probably your variable is wrongly defined.
What you can do is create a query over that aggregation level, and insert the planning filter in there. Put some key figure on the query and put a breakpoint on your variable customer exit code. Execute the query and debug the variable code to check the error.
Hope this helps,
Regards,
Diogo. -
Variable filename and folder in receiver cc
Dear experts,
On PI, I need to create a (text-) file with a variable name and folder. The scenario is as follows:
idoc-> PI -> txt file
In my incoming Idoc I get the following data:
- directory where the txt file should be saved;
- name that the txt file should get.
How can I realise this in PI? Using variable substitution? As I never done this before, I have a hard time getting this to work...
Please help.
Thanks in advance
WilliamHi,
Use Dynamic Configuration:
Input will be 2 variables var1, var2.
String Name1 = var1;
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
conf.put(key1, Name1);
String Name2 = var2;
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
conf.put(key2, Name2);
return "";
Maping:
Var1---
UDF----TargetMessageNode.
Var2---
Under ID: Enable ASMA in file receiver adapter and chk FileName and Directory.
and put * under File name and / underTarget Directory(File receiver).
NOTE: U can alter this UDF according to ur req.
Thanks
Amit -
Refresh Variable values in WAD
We have a strange problem in WAD.
Actually we are on 731 on Hana and we have built a web report with WAD which contain 20 queries. these queries has 2 varibales:
- calyear
- Company code
As ex when we launch the report with variable's values 2013 - CC01 the system shows the message ' No data found..' for one query but now if we select the button 'refresh variables' (always for 2013 - CC01) the system shows data!
Also if we execute the same query in BEX the system shows data.
In fact there are correct data in InfoProvider for this selection but it looks like that for the 1st execution the system is unable to incorporate the correct variable's value.
Regards
LucaThe problem is that refreshing data across all queries works only if we are already into the report (img 2) but if we launch for 1st time the same report it doesn't work (img 1), so:
1) launch the wad (variables 2013 CC01) the result is 'No data'
2) refresh the wad (always with 2013 CC01) the system show data.
thanks. -
Create ne Planning function in planning folder
Hi Experts,
I have one planning function A in X folder and my requirement is i need to create same planning function like A in planning floder Y. Please give me steps for creating planning function in planning folder.
I know how to create a planning function in planning level but i don't know how to create to a planning function in planning folder.
Please help me on this.
Thanks
SAPHi Mynak,
Thanks for your reply. Yes ur r correct, we cdon't create planning function in the planning folder insted o this we can drag the created planning function into planning folder.
How to drag this from left side to right side and place into global planning function area.
I am missing some thing. I couldn't slect the planning package and parameter group.
Can u let me know how to do this one.
It would be great help for me.
Thanks
SAP -
Planning Function giving error 'not initialise' in BPS Planning folder
Hi
Have created the std copy planning function and have included in the folder. Its giving the error the function is not initialised. What do I need to do to remove this error. Any suggestion most welcome.
Kind Regards,
SarahHi Sarah,
Can you be please feed in some more information on the function you have created. What is the parameter group you have created. Is the error coming while checking the planning folder or before that. -
Hi All,
Q1) The variables that are created in query designer or the filter variables created in planning modeler can be accessed in fox functions? If yes, how ? I have a requirement where I have to read the cost center variable values and make the changes accordingly in the fox functions i.e pass the cost center variable values to the fox planning function. My fox planning function will update the 0amount key figure for the cost center variable value. for eg: if I use variable "VARCOCNTR" , can I use this variable in fox function like below
DATA COSTCNTR TYPE 0COSTCENTER.
COSTCNTR = VARC("VARCOCNTR").
Let me know which variables can be accessed in fox and exit planning functions.
Q2) Need to know the scenarios when and how we use variables for planning functions and planning sequences
Q3) Can somebody send me the How-to guide for creating custom function modules(exits) in IP for any scenario with full code so that I can practice it.Hi Jacky,
For your Q1) , the answer is yes. all the single type variable can be retrieved in IP Formula, single,multi-single, user exit, authorization, realize that the value of variable is not a range.
Hope this help.
B.R
Gerald
Maybe you are looking for
-
How can I fix problem of Screen freezing in Fullscreen view display.
Click Vie , Full Screen. Have multiple tabs open. Screen freezes. Prompting does not drop the tabs back down to switch pages etc. Happens randomly, several times a day, since upgrade to Firefix 9. Prior to that I never had an issue with the Full scre
-
BSOD when start transfering data
Hello. Im install latest itunes at my new computer with win xp sp3 and when i connect my ipod and try to send some new music\cinema i got blue screen of death. Error name - IRQLNOT_LESS_OREQUAL. When im just connect my ipod all work. When i start tra
-
Entourage/Outlook to iCal: Multi-day events not showing up correctly. HELP
Entourage and Outlook to iCal: Q. multi-day events have the correct dates and are all-day events in entourage, but they only appear on the first day in ical even though when you click on the details it shows that it is a multi day event in ical...bu
-
I've been seeing a lot of RSS apps on the appstore and on websites. I've read through some product descriptions and they all do just about the same thing: compile feeds. Mac Mail seems to handle RSS' just fine, and other than having to update the fee
-
i want my money back. i rented a movie and it quit and now i cant find it