Refreshing data after pushView

Hi,
I'm adding data to a database with a PopUp window. When I click the OK button to complete everything I want to return to a listbox that I can choose items from. The data is getting saved into the database but for some reason I can't get the listbox to update when I push the view to the original view with the listbox. I have tried myList.clear but I get an error
1119: Access of possibly undefined property clear through a reference with static type spark.components:List.
MyNewTestHomeView.mxml
/MyNewTest/src/views
line 69
Flex Problem
I have searched but can't find a way to clear the listbox when the view loads.
Neil

I figured it out. It was a stupid mistake on my part. I was selecting from the wrong table.
Neil

Similar Messages

ALV - refresh data after value is selected from input help

Hello,
I have input ALV where after I enter material number and press enter, the logic goes ahead and populates description column by utilizing ON_DATA_CHECK event.
Is is possible to trigger some kind of event after the value is selected from search help without hitting enter key?
When the user done with using search help and clicks on material number that he needs, the value is populated in ALV cell, and this is where I need some event trigger to fire the logic to get description without pressing enter.
Thanks,
Alex

Alex, in that case, the alternative you have is to:
- Create a Z structure where you have all the table fields
- Bind the Standard DDIC search help to the Material ID (Importing) and the Description (Exporting)
- Create the whole context node in WD referencing that DDIC structure.
The important thing here is that the context node as a whole must reference the structure in order for this to work, not just the fields affected. This may not be possible or desirable in certain cases.
If you do this, the Description will be populated by the SH through its returning parameter, so you wont have to do anything in WD to retrieve it as for the manual input + Enter cases.
Here you have some help on SHs parameters:
http://help.sap.com/saphelp_nw70/helpdata/EN/35/bdb6e2c48411d1950800a0c929b3c3/frameset.htm
Hope this helps.
Edited by: Alejandro Bindi on Sep 19, 2008 12:36 PM

Refreshing data after insert

I am using jsp + bc + adf (jdev 10g). When I insert a record with sql:update (see the code below) the trigger on the database updates another table. Insert works fine and I can see the inserted record but I don't see the changes made by the trigger until I open the browser again. Can I do something about that?
<sql:setDataSource
var="ds"
driver="oracle.jdbc.driver.OracleDriver"
user="user"
password="password"
url="jdbc:oracle:thin:@..."
/>
<sql:update dataSource="${ds}">
Insert into sometable values (..., ..., ...)
</sql:update>

It is because I am trying to insert a record without dropping a create method on a datacation. I am trying with the code below but getting error messages.
Is there something I can do about this?
DataAction.java
package view;
import javax.servlet.http.HttpServletRequest;
import oracle.adf.controller.struts.actions.DataAction;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Row;
import oracle.jbo.domain.Number;
import oracle.jbo.ViewObject;
import org.apache.struts.action.ActionForward;
import oracle.adf.controller.struts.actions.DataActionContext;
import java.io.IOException;
import javax.servlet.ServletException;
public class InsertZauprocDAAction extends DataAction
protected ActionForward findForward(DataActionContext actionContext) throws IOException, ServletException
ApplicationModule appModule = actionContext.getBindingContainer().getApplicationModule();
ViewObject viewObject = appModule.findViewObject("ZauprocView1");
HttpServletRequest request = actionContext.getHttpServletRequest();
Row row = viewObject.createRow();
row.setAttribute("IZA", request.getParameter("Iza"));
row.setAttribute("IZVRSIOC", request.getParameter("Izvrsioc"));
row.setAttribute("STATUS", new Number(200));
viewObject.insertRow(row);
appModule.getTransaction().commit();
return super.findForward(actionContext);
error
500 Internal Server Error
java.lang.NullPointerException
     at oracle.adf.model.binding.DCBindingContainer.getApplicationModule(DCBindingContainer.java:341)
     at view.InsertZauprocDAAction.findForward(InsertZauprocDAAction.java:18)
     at oracle.adf.controller.struts.actions.DataAction.executeImpl(DataAction.java:150)
     at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:69)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:527)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:356)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:148)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:148)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:610)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:784)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:536)

Refresh Dates in DAC

Hi experts,
I ran the ETL yesterday . I find only one or two target tables with the refresh dates after the run.
Could anyone explain when are the Refresh dates populated and when are they not .

What modules did you run DAC for?

How-To "Refresh a table of data after inserting or deleting"

I'd like to say a word on the how-to article "How to refresh a table of data after inserting or deleting a row using ADF".
(http://www.oracle.com/technology/products/jdev/howtos/1013/updtable/index.html?_template=/ocom/technology/content/print)
I spent a lot of time on it because I needed help in implementing simple CRUD functionality on a table, using JSF-ADF-TopLink technologies.
While the the article does provide correct steps, it is in one important place not specific enough, so the reader may easily get stuck. In section "Refresh the data table", point 1: when you double click on the removeEntity() button, in Structure window, then you do not get the required dialog. You get CommandButton Properties dialog.
You must click on the removeEntity() button in Editor's Design view. But even there you may get the CommandButton Properties dialog, not managed beans dialog.
You may resolve that by going to JSF configuration file, faces-config.xml, and switch to Overview view. This will show you the managed beans that you have.
Then, you may already have a backing bean for the page. You can use that and avoid creating a new managed bean.
I could understand what the operations mean only after very careful reading of "Creating More Complex Pages", section "Overriding Declarative Methods" in JDeveloper Help (or in ADF Developer's Guide PDF document).
In general: I believe that "ADF bindings" need more conceptual explanation, maybe in form of an article. Grammatical form "bindings" may create a false understanding that "bindings" are just references. But they are not -- ADF bindings are active objects that handle traffic between UI components and Data Controls. It seems that "bindings" even communicate among themselves. Maybe it would be more understandable to differentiate strictly between "binding objects" (or "binders"?), binding object definitions and binding object references.
It would be very helpful to have a diagram showing grahically what specific binder objects are created in a small apllication (2-3 pages using 1-2 tables), with whom they communicate and what type of data is passed on.
Priit

Hi
Thanks for your infos.
Yes exactly I use almost the same code you have post here.
Could You answer to my next questions?
First - >what do you mean by saying that "it's not good idea using refreshing in IE?" Of course I use refreshing in backing_bean for my button "remove" that removes row, commit changes to database and refresh table, almost the same as You said in your post:
Code in backing_bean is and comments on difference to Your code is below:
public commandButton2_action1(){
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("removeEntity");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
//above remove entity, but I dont now if it do commit to database? So i do it below
OperationBinding commit1 = bindings.getOperationBinding("Commit");
commit1.execute();
//and at the end I refresh my table, "findAllRezerwacja1 - it is an id of the methodAction, not the iterator -> is it ok? or should I change to Iterator id?
OperationBinding requery = bindings.getOperationBinding("findAllRezerwacja1");
requery.execute();
return null;
Page Definition code for this:
<methodAction id="findAllRezerwacja1"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="findAllRezerwacja"
RequiresUpdateModel="true" Action="999"
ReturnName="SessionEJBLocal.methodResults.SessionEJBLocal_dataProvider_findAllRezerwacja_result"/>
<table id="findAllRezerwacja2" IterBinding="findAllRezerwacja1Iter">
<AttrNames>
<Item Value="dataDo"/>
<Item Value="dataOd"/>
<Item Value="idRezerwacja"/>
<Item Value="liczbaUczestnikow"/>
<Item Value="prowadzacy"/>
<Item Value="uwagi"/>
</AttrNames>
</table>
<methodAction id="removeEntity" InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="removeEntity"
RequiresUpdateModel="true" Action="999">
<NamedData NDName="entity"
NDValue="${bindings.findAllRezerwacja2.currentRow.dataProvider}"
NDType="java.lang.Object"/>
</methodAction>
<action id="Commit" IterBinding="findAllRezerwacja1Iter"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" RequiresUpdateModel="true"
Action="2"/>
</bindings>
//and rest of code for Iterator etc
My second question is, why when you use refresh button in IE (I know is not recommended as You said, but sometimes user do it, so I want prevent situations that I will describe here) so when I press refresh button in IE exactly after removing one row by clicking my button, refreshing by pressing IE button is doing the same --> is deleting next row. How to stop deleting row, when for example user would press IE refresh button after pressing remove button for table. If I change selection in table after deleting row, and press refresh button in IE, instead of deleting row, I got error message: JBO-29000: JBO-35007: and
JBO-35007. So where Im doing wrong. Maybe I should do sth with postback ? Could You help me? Thanks in advance
Last one question: what is the difference between using delete and removeEntity from operations node? Im now reading carefully ADF Dev Guide, so I hope I can find infos there? But if You know, please answer to this question.
Thanks

Best way to refresh page after returning from task flow?

Hello -
(Using jdev 11g release 1)
What is the best way to refresh data in a page after navigating to and returning from a task flow with an isolated data control scope where that data is changed and commited to the database?
I have 2 bounded task flows: list-records-tf and edit-record-tf
Both use page fragments
list-records-tf has a list.jsff fragment and a task flow call to edit-record-tf
The list.jsff page has a table of records that a user can click on and a button which, when pressed, will pass control to the edit-record-tf call. (There are also set property listeners on the button to set values in the request that are used as parameters to edit-record-tf.)
The edit-record-tf always begins a new transaction and does not share data controls with the calling task flow. It consists of an application module call to set up the model according to the parameters passed in (edit record X or create new record Y or...etc.), a page fragment with a form to allow users to edit the record, and 2 different task flow returns for saving/cancelling the transaction.
Back to the question - when I change a record in the edit page, the changes do not show up on the list page until I requery the data set. What is the best way to get the list page to refresh itself automatically upon return from the edit-record-tf?
(If I ran the edit task flow in a popup dialog I could just use the return listener on the command component that launched the popup. But I don't want to run this in a dialog.)
Thank you for reading my question.

What if you have the bean which has refresh method as TF param? Call that method after you save the data. or use contextual event.

A better way to refresh data

Hey everyone, I'm creating a Flex/ColdFusion app. and I've
been working with CFCs and RemoteObjects. I know that when you want
to refresh data you have to call the CFC with the RemoteObject
every time (after the creationComplete is called I use addedToStage
and removedFromStage to re-call the CFC). Is there a better way to
refresh my data or "re-initialize" the component?
Also, does anyone know the proper way to log someone out
using ColdFusion and Flex? I pass the cflogout method in my CFC and
in Flex I return the user to the login page and "reset" my objects
I use to store user data, but after logging in as a different user
the previous user's info is still present. So I've resorted to
reloading the URL to clear the application of all data. Any tips?
Thanks,
PJ

I don't really get what you mean with "re-initialize the
component"?
Here you can learn about login and logout in ColdFusion.
http://www.brucephillips.name/blog/index.cfm/2006/11/27/Login-and-Logout-Flex-Example-That -Uses-ColdFusion-CFLogin-and-CFC-Role-Security

How to stored data after clicking checkbox save in database table

TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP.
TYPES: BEGIN OF tp_data,
      mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
*data: t_data like ztable occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*&      Form get_data
      Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
ENDFORM.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
      t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title   TYPE lvc_title,
        w_comm    TYPE slis_formname,
        w_status TYPE slis_formname,
        x_layout TYPE slis_layout_alv,
        t_event    TYPE slis_t_event,
        t_fieldcat TYPE slis_t_fieldcat_alv,
        t_sort     TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
        1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
        4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
        5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
        6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
        9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
    14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program       = sy-repid
    it_fieldcat              = t_fieldcat
    is_layout                = x_layout
    it_sort                  = t_sort
    i_callback_pf_status_set = w_status
    i_callback_user_command = w_comm
    i_save                   = 'X'
    it_events                = t_event
    i_grid_title             = w_title
TABLES
    t_outtab                 = t_data
EXCEPTIONS
    program_error            = 1
    OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
      t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
        x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event   TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
      t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
      t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
    wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
    wa_fieldcat-ref_tabname = p_ref_tabname.
    IF p_ref_fieldname EQ space.
      wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
    ELSE.
      wa_fieldcat-ref_fieldname =   p_ref_fieldname.
    ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
    wa_fieldcat-INPUT     = 'X'.
    wa_fieldcat-EDIT     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
=========================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    i_logo             = 'XXXXX'
    it_list_commentary = t_heading.
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
FORM user_command USING r_ucomm     LIKE sy-ucomm
      rs_selfield TYPE slis_selfield.
ENDFORM.                    "user_command
this is my code, how to store data after clicking checkbox in databasetable,
how to write that cide.
plz send me code.

hi!,
use MODIFY to update data into the data base table.
regards
anjali

Report prints Saved Data not Refreshed Data

We were running VS 2005 and using the Basic CR 2005 Basic that comes with it. We upgraded to use CR 2008 and found MANY issues after we went live in production that were apparent in the development. This has caused a lot of stress with us as well as our users. Iu2019ll summarize everything we found, possible workarounds and the open issues including the Printing/Loading of Saved Data.
First, it was reported that printing changed. It turns out when PrintMode = u2018PDFu2019 (default setting) it now asks after you choose u2018EXPORTu2019 (use to be u2018OKu2019) that it asks to Open or Save the Adobe. When our customers were running 20 some reports at a time and we had hundreds of users, this became a nuisance for the heavy reporting users and a training issue in general for us. With research, I found that we can change the PrintMode to be u2018ActiveXu2019. This was much better when we were testing. However, in Production it became a nightmare. If the user is on a Domain that disallows itu2019s user from installing software or if the user has tight security settings, this became a nightmare.
The second thing reported was that it was exporting to the wrong format. It was exporting into RPT format. It turns out with CR2008, it automatically defaults to RPT and the new pop-up, doesnu2019t isnu2019t clear to the user they even have a choice (the pop-up is much prettier, but it doesnu2019t look like a dropdown anymore). In addition, they reported it was taking twice as long to export (we think it was related to export file type now). With CR2005 Basic, it would have no default selection and if the user didnu2019t pick one, it would remind them they need to pick one. After much research, I found there is no way to customize the operation of the export without writing my own export. My users 90% of the time want to export to PDF and Excel the rest of the time. Since we arenu2019t using a CR Server like product, they NEVER will do RPT. There is no way with CR2008 to limit this list or to default the File Format. So now, if they forget to select the type, they get the wrong file format instead of being reminded to select one. Since the new pop-upu2019s dropdown selection isnu2019t easily apparent, this was a BIG issue for us. Since I have close to 300 reports on 7 websites, this will be a lot of work for me to write my own code and change all the ASPX page to use my own control.
The third thing reported was that the default name on Exporting was changed. Export uses the ID property of the Crystal Report Viewer as the default name of a file on export. When it replaced the viewer on all our pages, it set the ID to CrystalReportViewer1 instead of preserving the original ID. We now have to go back and change them to what we wanted manually. BEAWRE of this! For our power users who wanted to export 40 reports they now have type the name in manually on all of them. What took minutes now takes over an hour for them to do, until we can fix all the pages.
Now it was reported that some reports are showing OLD data. It turns out there shows Saved Data from design time. In our site, we have a parameter page which getu2019s user selected parameters, save to a session and then load the report page using the session variables, and then redirect them to the report page which on page load we set the reports parameters. We use the CrystalReportSource using ODBC. The report has all the connection information. Well if the user happens to select the same parameters I used at design time, it wonu2019t pull the data from the database. They see our test data instead which is garbage. If they select different parameters, display the report and then go back and select the original parameters, they will get the correct data. This can be catastrophic for us! So I added at the beginning of the Page Load before setting parameters the following:
     If Not Page.IsPostBack Then
            CRSServiceAlertsReport.ReportDocument.Refresh()
     End If
This seemed to work. A pain to add on every report page though when it wasnu2019t necessary before. But then I just got called this morning and they say when they print, it prited the OLD data. It seems the refresh pulled new data and updated the display in the viewer but the ActiveX print still used the original Saved Data! I couldnu2019t find a solution for this. I found switching PrintMode back to u2018Pdfu2019 worked but now I have the extra click issue again, which I described above. I tried setting the reports u2018Discard Saved Datau2019 option but it still had the data!
In the end, had I known about all these issues I would have NEVER upgraded to CR2008. Iu2019m still looking for help on getting by the following:
u2022     Stop using Saved Data at runtime (either on Display or Print)
u2022     Getting the PrintMode=u2019Pdfu2019 to just pull up Adobe in Open mode without prompting the user.
u2022     Remove File Type options from Export
u2022     Set the default File Type options to nothing or something I want.
Another nice feature to have would be the ActiveX control for printing to be part of the .NET Framework so users donu2019t need to download it. Come on BO is a big company Iu2019m sure they can work with MS. 

What is that method to clear Saved Data; I looked and couldn't find it. I never had to call one in the prior version of CR 2005 Basic in .Net. With the .NET controls, it always refreshed the data before. This is a change in behavior for me.
As for the Print using Adobe, with CR2005 Basic, it didn't prompt the user to Open or Save before. This is new behavior. It used to just open the report in Adobe in memory before without this specific prompt (it did have the first prompt for All or specific pages, but it would just open after that). This is a change in behavior from prior versions and it has caused me several issues.
Many users don't like change and I didn't know to communicate this to them. They were taken by surprise. We'll learn to live it I guess, but I would ask you just to consider, why have an option to "Save" to PDF when you choose to print? I would think you would use Export if you want to save. It would never hurt to add an option to allow alternatives either.
As for including with .NET Framework, it was just an idea. I know how hard it can be working with third parties. However, given that CR Basic comes with it, I thought it may be possible to work with them. The better the integration the better the product is for the developers. I was thinking the button could call JavaScript/Java to print instead of an ActiveX, or some other method. Since I donu2019t know how the Control works, I couldnu2019t say. It just would be nice. I had a smiley face after that request, it didn't come out right when I saved the post.
I still don't understand why .Refresh will update the data in the viewer but printing using the ActiveX Control will still print the saved data instead of refreshed data. Since I never used this in the prior version I don't know what it would of done or not, but it just doesn't seem right it shows one set of data, and prints another.
In addition, why the designer still saves data with the report when you state not to, I think may be a problem still.
Edited by: Thomas Johnson on Nov 21, 2008 12:26 PM

Powerpivot for sharepoint error: Unable to refresh data for a data connection in the workbook

Hello,
I have three errors when i try to use a simple powerpivot workbook published in sharepoint: (nothing on google has help me..)
1-Unable to refresh data for a data connection in the workbook.
Try again or contact your system administrator. The following connections failed to refresh:
PowerPivot Data
2-The embedded PowerPivot data in the workbook cannot be loaded due to a version mismatch
3-01/21/2012 17:26:47.08 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel
Calculation Services    bccc Medium Session.HandleTrimmedWorkbookReloading: userOperation ApplySlicerSelectionOperation requires BaseWorkbook: "http://crm2011:2020/Marketing%20Reports/test2_excel32bits.xlsx"
[0x409] [Saturday, 21 January 2012 09:40:18] [BaseWB ID: 2] to be untrimmed if it is currently trimmed. The workbook is currently NOT trimmed. fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.08 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    f1va Medium CWorkbookWrapper::CWorkbookWrapper: Created with ID=4 fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.09 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    eq3r Medium ConnectionRequest.ConnectionRequest: New connection request. SessionId=1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
WorkbookVersion=ConnectionInfo.WorkbookVersion: Uri=http://crm2011:2020/Marketing Reports/test2_excel32bits.xlsx, Version=Saturday, 21 January 2012 09:40:18 fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    aysl Medium Succeeded to initialize a chart. fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    8xk9 Medium ExternalSource.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException: Exception of type
'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException' was thrown.     at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String externalSourceName, Int32
externalSourceIndex, Boolean& shouldReportFailure)     at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.ExecuteOperation(Request request, ExternalSourceStateInfo externalSourceStateInfo, ExternalSourceStateInfo prevExternalSourceStateInfo,
Int32 index, ConnectionInfoManager connectionInfoManager, ExternalDataScenario scenario, DataOperation dataOpe... fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12* w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    8xk9 Medium ...ration, Boolean verifyPreOperationConnection), Data Connection Name: PowerPivot Data, SessionId: 1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
UserId: 0#.w|contoso\manager fb614a65-e398-4b97-a98d-fb7b23eab39f
My server and client olap versions are the same: MSOLAP.5, i used sql server 2008 R2 SP1 and sharepoint 2010 SP1 and reboot or iisreset have no effect
Thanks in advance for your help

Hello Challen Fu
I would be so grateful if you could please help me out
I have been trying to find a solution to the same error message
In my case, the power pivot reports were working before on a regular team site , but then two things changed:
a) I created a toplevel site using the BI Center template. Now I am using a Business Intelligence template , created a power pivot gallery library and uploaded a few powerpivot reports
b) On the  backend, the database instance was upgrated to SQL Server 2012
     Front end Server VDSP01 remains SQL Server 2008 R 2 where Sharepoint 2010 was installed as a FARM
Now, the reports will display in sharepoing however they will not refresh. the error message i get is the same.
Scenario recap:
a- Server VDSP01 uses SQL Server 2008 R 2 where Sharepoint 2010 was installed as a FARM
b- On the back end, the database instance name was replaced with SQL 2012 Server:
         from SQL Server 2008 R 2 (instance DBDEV-COTS\COTS)
           to     SQL Server 2012 ( instance VTSQL01\COTS)
c-  I was told that:
     From VDSP01, they ran
CliConfg.exe to create SQL Server Alias :
       where    BEFORE: vdsharepoint --> DBDEV-COTS\COTS
            and AFTER    : vdsharepoint --> VTSQL01\COTS
I appreciate in advance any help you can provide<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
  <v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
  <v:f eqn="sum @0 1 0">
  <v:f eqn="sum 0 0 @1">
  <v:f eqn="prod @2 1 2">
  <v:f eqn="prod @3 21600 pixelWidth">
  <v:f eqn="prod @3 21600 pixelHeight">
  <v:f eqn="sum @0 0 1">
  <v:f eqn="prod @6 1 2">
  <v:f eqn="prod @7 21600 pixelWidth">
  <v:f eqn="sum @8 21600 0">
  <v:f eqn="prod @7 21600 pixelHeight">
<v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype> <v:shape alt="" id="Picture_x0020_2" o:spid="_x0000_i1025" style="width:630pt;height:475.5pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\wlarange\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
</v:imagedata></v:shape>
wanda larangeira

CR 2008/VS 2005/Winform : HOW TO REFRESH DATA ONLY ?

Hi,
I display a report in a CrystalReportViewer (Windows Form).
This report have NO Saved data, use some parameters, use a formula, and connect to a SQL Server via OLE DB.
I would like to REFRESH THE REPORT after some data has been modified in the Database. (just the DATA in the report, NOT the parameters, NOT their values, and NOT the formula).
PROBLEM : this SIMPLE TASK seems to be IMPOSSIBLE to do !!! (I can't beleive this !)
If I call Refresh() or ReportRefresh(), in the Viewer or in the ReportDocument, the formula AND the report Parameters have no more effects.
"ReuseParameterValuesOnRefresh = true " : DON'T WORK !!!
QUESTION : Is there a way to refresh DATA in a report without completely reload the entire report file & params & formulas & Data & ... ???
Thanks a lot for your help.
Steph

I have had a similar issues with report parameters.
The solution for me was to set the parameter value in the RefreshReport event of the ReportDocument not the crystalReportViewer.

How to save data after clicking checkbox stored in databasetable

TYPE-pools: slis.
tables:mkpf,mseg,mard.
TYPES: BEGIN OF tp_data,
      mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     checkbox TYPE c,
__mark,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*&      Form get_data
      Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
ENDFORM.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
      t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title   TYPE lvc_title,
        w_comm    TYPE slis_formname,
        w_status TYPE slis_formname,
        x_layout TYPE slis_layout_alv,
        t_event    TYPE slis_t_event,
        t_fieldcat TYPE slis_t_fieldcat_alv,
        t_sort     TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
        1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
        4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
        5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
        6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
        9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        14 '__MARK' 'XFELD' space space space 'Select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'LIFNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program       = sy-repid
    it_fieldcat              = t_fieldcat
    is_layout                = x_layout
    it_sort                  = t_sort
    i_callback_pf_status_set = w_status
    i_callback_user_command = w_comm
    i_save                   = 'X'
    it_events                = t_event
    i_grid_title             = w_title
TABLES
    t_outtab                 = t_data
EXCEPTIONS
    program_error            = 1
    OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
      t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
        x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event   TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
      t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
      t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
    wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
    wa_fieldcat-ref_tabname = p_ref_tabname.
    IF p_ref_fieldname EQ space.
      wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
    ELSE.
      wa_fieldcat-ref_fieldname =   p_ref_fieldname.
    ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
    wa_fieldcat-INPUT     = 'X'.
    wa_fieldcat-EDIT     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
=========================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    i_logo             = 'XXXXX'
    it_list_commentary = t_heading.
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
FORM user_command USING r_ucomm     LIKE sy-ucomm
      rs_selfield TYPE slis_selfield.
Example Code
Executes a command considering the sy-ucomm.
CASE r_ucomm.
   WHEN '&IC1'.
     Set your "double click action" response here.
     Example code: Create and display a status message.
     DATA: w_msg TYPE string,
           w_row(4) TYPE n.
     w_row = rs_selfield-tabindex.
     CONCATENATE 'You have clicked row' w_row
                 'field' rs_s lfield-fieldname
                 'with value' rs_selfield-value
                 INTO w_msg SEPARATED BY space.
     MESSAGE w_msg TYPE 'S'.
ENDCASE.
End of example code.
ENDFORM.                    "user_command
this is mycode,mblnr, matnr and checkbox both field had created in database table
then save data after clicking checkbox data stored in database table,and next clickin checkboxes are no change. this my requirment.
plz send me code .

Try this
In user_command form...
LOOP AT IT_DATA.
IF CHECKBOX __MARK EQ 'X'.
write logic wht u want....
ENDIF.
ENDLOOP.

Errors found retrieving data after SAP Patching

Hi Team,
I received the error "errors found retrieving data" when I try to click
the ‘Refresh’ button to display data for my reports. Refer to the
attached screen.
I’m receiving it from trying to refresh data in ‘Reports’ and ‘Input
schedule’ templates from the BPC Excel Client. This was happen after we
done the SAP Patching earlier it was working fine.
Appreciate your help in advance
Thank you
Regards
Raghu

Hi,
Try to process all dimensions.
If not try to find more details from EPM-->More-->Log
Hope it helps..
regards,
Raju

Crystal Reports return no data after publish to Infoview.

*Description of Problem or Question:
Reports defined in Crystal report client do not work correctly when published to Infoview.
When report run from client, correct data is returned. When run from Infoview, no or limited data is returned.
The problem is new since installation of Service Pack 3 fixpack 3.5.
We are using the SAP Integration kit.
Product\Version\Service Pack\Fixpack (if applicable):
BOBJ XI 3.1 SP3, FP 3.5 (Including Integration kit transports)
Relevant Environment Information (OS & version, java or .net & version, DB & version):
Windows 2003 64-Bit, Java, Linking to SAP ECC6 on MAXDB 7.6
Sporadic or Consistent (if applicable):
Consistent, altough 1st refresh returns data, subsequent refresh returns no rows or few rows.
What has already been tried (where have you searched for a solution to your question/problem):
We have searched SAP Marketplace for OSS notes but none match our problem.
Steps to Reproduce (if applicable):
Create report in Crystal Reports - publish to Infoview
Install BOBJ XI 3.1 SP3 and FP 3.5
Refresh report in infoview - shows limited or no data
Open report in Crystal Reports 2008 Client, refresh data - returns correct data.
Save Cystal report to Infoview, refresh data in infoview (scheduled or online) - returns incorrect or no data.

Hello,
this is interesting. Check your CR Server settings if there are any limits with regards to rows or timeouts after the installation of FP3.5
If your CR reports are running on a Universe, check the properties of the Universe if there are limitations affected to the rows.
If this all brings no result i would highly recommend to open a Support Message at SAP - maybe thats a Bug coming with FP3.5
Regards
-Seb.

Incremental Loads and Refresh Date

Hi all,
Thank you for taking the time to review this post.
Environment
Oracle BI Applications 7.9.6 (Financial & Project Analytics)
Oracle E-Business Suite 11.5.10
Question
I have a Test BI Apps 7.9.6 in a Test environment that is connected to a static EBS 11.5.10 data source. As part of my testing phase I'd like to do multiple Incremental Loads to get an accurate performance impact and timing study for the final pre-approval before migrating to Production. I can get a refresh of EBS which has a week's worth of transactions after my Initial Full Load. What I'd like to do is change Refresh Dates to "trick" the Incremental Load into only loading one days worth of data at a time, rather than the full week's worth of data in the Incremental load. Is this possible, and if so, how?
Example timeline:
Today - Initial Full load using Test EBS as of today
1 week later - Refresh static Test EBS from Production with a week of transactions
Post Refresh - Run daily Incremental jobs using static Test EBS
First Incremental Load - Today's position + 1 day,
Second " " - Today's position + 2 days,
Third " " - Today's position + 3 days, etc
As always all comments and solutions greatly appreciated.
Kind Regards,
Gary.

Say on the 01st of the month, you did a Load.
Then on the 08th of the month, the source EBS system was itself refreshed.
What you want to do is to run a single day refresh on the 08th for all data from the 01st to the 02nd of the month), and then another single day referesh -- whether on the 08th or on the 09th , you don't care -- for all data from the 03rd to the 04th.
Unfortunately, the refresh is from last refresh date to current date. You can't define "refresh upto date". Therefore, your first 'incremental' refresh on the 08th would refresh all data from the 02nd to the 08th in one shot. What you could try to do is
a. After the first load on the 01st, shutdown the BI DWH.
b. When the EBS test source is refresh on the 08th, reset your SYSTEM CLOCK ON THE BI DWH DATABASE SERVER to the 2nd (or 3rd) of the month.
c. Now, when you run a refresh, BI will extract all data from the 01st to the 02nd or 03rd (even though EBS is as of the 08th).
d. Once this is done, shutdown BI DWH.
e. Reet the SYSTEM CLOCK ON THE BI DWH DATABASE SERVER to the 3rd or 4th of the month.
f. Run another Incremental Refresh.
... and so on ...
Hemant K Chitale
http://hemantoracledba.blogspot.com

Refreshing data after pushView

Similar Messages

Maybe you are looking for